Hi XDA.
One day my "down directional button" stoped working correctly. When pressed nothing happens, however the up, left and right buttons work as do all the other buttons and functions on the wizard.
And sometimes the wizard thinks the down button is pressed so it starts scrolling down even though the button isn't pressed.
I have reflashed a few times and dissasembled the whole wizard with no visible errors.
Does anyone have any idea to what i can do to get it to work again? Please help me as it is now blocking incomming calls and does other crap.
Hi Mate
I have the same situation but on the right key. Upto now didn't find any solution. Driving me nuts. When I receive an sms late at night it ends up wasting all the battery . . . .
Hope someone comes up with a solution.
The lcd/digitalizer, mail/internet/led/speaker-board and yes/no/softkeys/d-pad/enter-board are all leaded together. so one can't just change one of the parts in the top sliding half of the phone. but there is a connector between the halfs, so if you have an other wizard that is broken you can combine the two.
but i only have one wizard =(
Related
About 1/2 of the time that I pull my jamin out of my pocket when I'm getting a call, I hit a button of some sort which shunts the inbound call to voicemail. Very very annoying.
I have my buttons all on the locked setting except for power, but when the phone rings - all bets are off and every button is live. Bad design.
Thanks in advance!
I too had the same problems ...I just get the photo framed and what happens .. I press the power botton and turn the thing off! Very annoying.
but you do eventually get used to remembering to not pick it up by the sides wher ethe buttons are.
Buttons
I asked the same thing last week (see link). The suggestion did sort of work, but was not slick enough for practical use. Would be nice for a proper solution (such as the 'menu*' on the Nokia).
http://forum.xda-developers.com/viewtopic.php?t=41956
My HTC Prophet's DPad has partially stopped working.
First of the UP stopped working, then several hours later the LEFT key didnt respond. Ive tryed cleaning the DPad and a soft reset to no avail.
When i leave the phone after 5 seconds it acts a if the left direction is being pressed and held. This action stops when i press the right or down key.
Anyone know what may be going on?
Back up your info then try hard reset.
It sounds like a hardware problem, but thats the only way to be sure.
Unfortunately if this is a hardware fault the only solution would be to take it to the lab.
Moving to prophet section.
Tryed HR, no avail.
Im pretty sure its hardware issue. There is grass stuck inside the casing which is impossible to reach. Everynow and again a small piece falls out.
Since yesterday im now able to scroll left. So i can only not scroll up now. Ill have to drive over some cobbles with the phone in the cradle to try dislodge some more.
Right, well I had been using my dual today and then all of a sudden my stylus broke. Not that that is a major problem though
Next i tried to text using the 16 key keyboard and everytime i press the jkl key it seems to act as if i have pressed that and then the ghi key at the same time. Also some other buttons are similar to that problem
Then.. it was just on while i was trying to figure out wats going on with the keyboard and the volume control kept going on and off wenever i put my finger on a button without pressing it :O freaky lol
I tried turning off and back on and when i turned it on it loaded the notes program. I checked the keyboard and it still wasnt functioning correctly!
Please Help! Urgent
Update : It seems to be working fine now . I just left it on for a while and when i checked now it seems to be fine.
Problems with reception
wrong place.
Hello, I have had this TYTN I for a long time without any major problems. It was originally with WM5 but then I upgraded to WM6. Lately I had a strange problem whereby the front buttons stop responding intermittently.
The below mentioned buttons stop working:
1. The Internet Explorer button.(Above on the right)
2. The Message button.(Above on the left)
3. The Call buttons. (The call picking and disconnecting button, below left and right) And the 4 keys along it.
During this time I have to resort to the pointer or the side wheel to use the phone, which is very frustrating.
If I press the reset button at the bottom, the keys work again for a few times, then stop to respond again.
I have tried to flash again with both WM5 and WM6 but did not help. I have opened the phone and reseated all connectors but did not help either. Do you think I should try replacing the ribbon cable?
I have searched the forum and found several threads with the same problem, but never a solution.
Your help is much appreciated. Thanks.
I have been struggling the last few months with the same exact problem. Sometimes the buttons work other times they don't, and in the last couple of weeks the frequency of button failure has increased (every couple of minutes).
I found a few users yesterday over on the HTC forum who were having the same problem and 1 user who actually reported a fix that worked for him.
Go to Start/Settings/System/Key Lock and select "Do Not Lock Buttons". Exit Key Lock and soft reset your device. You may know return to the Key Lock options and re-select your choice (I used "Lock all buttons except Power button").
Worked for the HTC user and is working for me as I have had no button failure now in the last 24-hours with repeated use of the device.
I hope this works for you because if you are like me I getting very close to trashing the unit.
Hi,
the problem could be the Xilinx chip (a BGA chip) on the pcb underneath the buttons.
As the buttons are pressed the board is flexed and some of the solder pads under the xilinx chip must have become detached from the xilinx chip itself.
I had the white screen problem. An while i got the white screen the front buttons where not working too.
In the whte screen threat i found that it could be the Xilinx chip, and figured out when pressing on this chip the white screen was gone and the buttons where working.
So i resoldered (refloated) the chip with a heatgun and some liquid flux last Sunday and since then i had no problems anymore.
I would suggest disassembling the phone down to the pcb and try starting it on with the ribboncables connected while keep some pressure on the Xilinx chip. And then trying the buttons if they work.
See
http://forum.xda-developers.com/showpost.php?p=2382665&postcount=134
in
http://forum.xda-developers.com/showthread.php?t=321163&page=14
Greets
jtf
I have the same problem with the same phone. The instructions above for "key lock" didn't fix it for me. I was assuming that it was hardware; but I just tried installing the Android port for this phone and under Android the buttons work fine.
I know that Android has some good stuff going for it, but I don't think it's awesome enough to circumvent a bad circuit... How exactly do these buttons work? Is there a process that should be running to handle them? Any other pointers?
Hello there, I am quite new to this forum, only being a lurker for quite some time. But I have decided to join because I am in dire need of help. My MDA/Wizard has suddenly gone out of control. I have had Mobile 6.1 installed on it for years with no problem, and the .cabs I have are working fine.
Now, recently, my phone has acted in a very unfavorable manner that has even caused me to hard reset it to it's original state, with still no luck. On about three different occasions, my phone's lights, keyboard and face, have gone off, and stay on until the phone locks. The main buttons, (Directional arrows, Exit, Call, Internet Explorer, and Mail) do not function unless I press a top right hand corner button on the keyboard twice. From there, it slightly functions. When I quickly press the power button and press it again, the phone will enter its mail area. Doing this again opens up internet explorer. Pressing the center button in the directional pad causes the screen adjustment function to suddenly appear. The keyboard can barely function.
I have no idea what's causing this, any help please?
try getting the newest hard spl and flashing a new rom. maybe your rom got corrupted