problem with installing programs/removing progams...PLEASE help :( - Wing, P4350 General

I've been trying to install cabs lately, and it says for most of the "installation was unsuccessful", and it deletes the cab files after that...
so i was wondering what the heck was going wrong, so i went onto settings and clicked "remove programs", and when i clicked that, there was nothing on the list of programs to remove!!! even though i have googlemaps, SPB mobile shell, and a few other things installed, it does NOT show on the list of installed programs, thus, i cannot remove anything, OR install any cabs
anybody know what i can do to remedy this situation....? there are several important aps i HAVE to install, and i was wondering what i could do to install these programs....should i take the non-cab route, and install it from my computer, with the Wing hooked up to it...? or any other solution?
any and all help is greatly appreciated, thanks

atrac7gts said:
I've been trying to install cabs lately, and it says for most of the "installation was unsuccessful", and it deletes the cab files after that...
so i was wondering what the heck was going wrong, so i went onto settings and clicked "remove programs", and when i clicked that, there was nothing on the list of programs to remove!!! even though i have googlemaps, SPB mobile shell, and a few other things installed, it does NOT show on the list of installed programs, thus, i cannot remove anything, OR install any cabs
anybody know what i can do to remedy this situation....? there are several important aps i HAVE to install, and i was wondering what i could do to install these programs....should i take the non-cab route, and install it from my computer, with the Wing hooked up to it...? or any other solution?
any and all help is greatly appreciated, thanks
Click to expand...
Click to collapse
Well, not really sure what's going on with that, but what rom are you running? Personally, whenever you have funky issues with the o.s., it's almost always best to do a hard reset.

There may be a good chance you have no space on your internal storage thus renders the installation unsuccessful.
Go to settings->system->memory to check the available storage.
If you do not wish a cab to be deleted after installation, change the property of that file to "read-only" either on a pc or use total commander.

dougstoner said:
Well, not really sure what's going on with that, but what rom are you running? Personally, whenever you have funky issues with the o.s., it's almost always best to do a hard reset.
Click to expand...
Click to collapse
i am using SPB mobile shell as my aftermarket rom...but i've been using that for awhile with no problems...even with hard reset (as in turning off the phone and on), i still can't access the "remove programs" and actually DO anything....the only thing it seems like i CAN do is do a full, factory reset, but i really don't want to resort to that.....
and wearefree, i did check the available storage, and it's not fully taken up...granted, it's not a lot left for storage, but still there's a good amount left for a few more progams to be installed
i appreciate all your guys' help...anyone else? is there still a way for me to install progams through active sync/computer....? instead of doing it the CAB style...?
thanks

atrac7gts said:
i am using SPB mobile shell as my aftermarket rom...but i've been using that for awhile with no problems...even with hard reset (as in turning off the phone and on), i still can't access the "remove programs" and actually DO anything....the only thing it seems like i CAN do is do a full, factory reset, but i really don't want to resort to that.....
and wearefree, i did check the available storage, and it's not fully taken up...granted, it's not a lot left for storage, but still there's a good amount left for a few more progams to be installed
i appreciate all your guys' help...anyone else? is there still a way for me to install progams through active sync/computer....? instead of doing it the CAB style...?
thanks
Click to expand...
Click to collapse
I was referring to a "hard reset", not just turning the phone off and on. That's a soft reset. When you do a hard reset, it basically rewrites over the os, so you will lose all you data, but it will be a fresh start, so you know there shouldn't be any errors. To do a hard reset, you press and hold the 1 and 2 buttons on the phone (buttons about talk and end) and press the soft reset button on the side. (with the stylus)

I also have this problem and would like to know an answer...i have hard reset and its done nothing..its almost like tmoble has it locked from putting programs in

Related

SPB PocketPlus not closing programs

One of the main features of PocketPlus that I use is the close button modification - so it closes programs as opposed to minimising them. However, it seems that it has stopped doing that.
I can't pinpoint anything that I've done to make this happen, I haven't installed any new software or changed any settings...
Can anyone think how I can fix this? It says it is set to 'close' rather than minimise in the options. All the ROMs and whatever on my Exec are default.
I'm using 3.04.
Anjow said:
One of the main features of PocketPlus that I use is the close button modification - so it closes programs as opposed to minimising them. However, it seems that it has stopped doing that.
I can't pinpoint anything that I've done to make this happen, I haven't installed any new software or changed any settings...
Can anyone think how I can fix this? It says it is set to 'close' rather than minimise in the options. All the ROMs and whatever on my Exec are default.
I'm using 3.04.
Click to expand...
Click to collapse
Reinstall
Should solve the problem (easiest way)
Okay, I've tried reinstalling BUT...
Before I uninstall, there is about 4MB of storage left. This doesn't increase when I uninstall, and when I reinstall it gives me the message about storage being critically low...
Also, when I look in memory in settings, it shows the storage memory as 7.4MB. However, when I go to install pocketplus it shows the memory available as 3.9MB.
Softreset before you uninstall then
It does that automatically, it says that I have to soft reset to complete the uninstallation. I have also done it manually.
I've removed something else now and in the memory settings pane and the remove programs pane it shows 8MB free, but when I go to install it it says 4.5MB free... Why could this be?
Reinstalling doesn't seem to have fixed the problem. It still isn't closing the programs.
Does anyone know of an alternate way to make the close button actually close things instead of minimising?
Got your same problem. Went even through a hard reset on my qtek 9000 and had it re-installed. Works for a couple of times than this function stops to work....Who knows why
I thus decided to go that way
-magic button (excellent freeware) it gives you many possibilities to manage apps closing or minimizing
-spb diary
-resco launcher (very essential launcher but n°1 memory saver
If resco launcher doesn't suit you keep magic button and go to illauncher
After you have played with complex and very aesthetical apps..you come back to efficiency.....
have fun
T
Magic button seems to be doing the trick now, thanks for the recommendation
I've installed this program on my Vario, but when uninstalling it it doesn't come off. Furthermore, my Vario isn't starting back up after it soft-resets itself to complete the uninstall. I tried just about everything, nothing will work!
Any suggestions??

My Remove Programs list disappeared

I was playing with several ipod UI's for my Hermes and somehow my remove programs list is now blank. the total storage memory available at the bottom is also blank.
it seems like i didnt install anything...but all my programs that where installed before still works.
i think it happened after i uninstalled WA2 and WAD.
anyone know how i can get it back???
Hi,
try to remove the last 1 or 2 programs you've installed using activesync (add or remove software) .... your list should come back.
bye
Thanks for the help...but i am using WMDC and it gives me an error everytime it tries to sync.
sigh...i guess i'll just have to upgrade to black 3.5 with a fresh install.
Sorry to ressurect an old thread but I just had exactly the same issue on my HTC Touch. All my installed programs have vanished from the list (but still work) and ActiveSync won't connect to let me install or uninstall anything.
I have 6.97mb of storage free and 16.33mb of program storage free.
Any ideas how to sort this out without clearing everything out and starting again?

wizzard hangs on startup :(

hello guys,
i've got a little problem, a while ago my device started to "hang" on the startup, when soft reset my device it boots, but then, when the backlight fades away, and i wait a while my device is stuck on the "Windows Mobile" screen.
this doesn't happen when i keep pressing my touchscreen when the backlight fades away, but i find it quite annoying.
so i was wondering, has anyone got a solution for this annoying problem?
Thanks in advance
Greetings Richard
It's time to hard reset you device...
starkwong said:
It's time to hard reset you device...
Click to expand...
Click to collapse
already did that and restored using a backup but it didn't solve anything
are you saying i should reinstall everything? :O would be quite ****edup
yep something in the backup you made is screwed, probably a startup program.
if you are able to get fileexlorer up before you soft reset after the restore you might be able to move all the shortcuts out of the startup folder to somewhere else then try putting one back each time until you find whats crashing it.
allthough a full reinstall of everything would be quicker and less work
funy said:
yep something in the backup you made is screwed, probably a startup program.
if you are able to get fileexlorer up before you soft reset after the restore you might be able to move all the shortcuts out of the startup folder to somewhere else then try putting one back each time until you find whats crashing it.
allthough a full reinstall of everything would be quicker and less work
Click to expand...
Click to collapse
thanks, mayb a noob question, but where can i find this startup map?
full reinstall would be more work i think, because i have alot of software on the device, so also alot of settings etc., so i think i'll go for option 1
Mostly they are in \Windows\Startup, and some may create system services which you can view (and disable) using TaskMgr (a freeware)

If I don't fix it, I will have to hard reset.

This sucks. Everything was going great but for someone reason lately, I am having trouble turning on my XV6800 from standby. Some times I have to hit the power button more then once. Or wait for a couple of seconds then it turns on. It is not dependent on the power button, because when I switched it to turn on when any button is on, it still won't turn on. What does get it out for good is if there is a call or a text that wakes its self up. But other times the power button works great.
I would love to solve this problem! I used SKTools to see what is running as soon as I hit the power button and hit it again to turn on. Both TimeWizard.exe and shell32.exe are at hundred for that second. Is that ok/normal? Have any suggestings before I hard reset?
If I do hard reset, I am wondering if instead of going to MR1 I should go with a WM6.5 rom. Is it really more trouble then its worth? I get about 21 of 22MB at startup (aftering clearing ram in beginning). What's the average for WM6.5 with the titan? I rather fix my problem and not hard reset, hate to reinstall all the software and do all the registry hacks all over again.
edit: Looks like this is an issue (a lot of people had it) that cannot be solved without hard reseting. So I still need to decide what route (MR1 or WM6.5) to go with...
I personally like 6.5. With the inclusion of a tool called nueKernel, many ROMs will boot with up to 28ish MB of RAM in high memory mode on a fresh install. In low memory mode, it's usually between 20 and 22. High memory mode, if you aren't aware, temporarily disables the camera. Low memory mode enables the camera. You can switch back and forth easily using a setting in your System menu.
Also, make note of any tools you currently use on your Today screen. Any third party additions may not exist for the new Titanium layout. There are a bunch of new add-ins for it that will most likely do everything that you need, but do some poking around first. You can also use the older today screen on 6.5 if you can't find what you need for Titanium, but that ruins a lot of the fun.
Since you use SKTools, you can also easily export any registry tweaks you put in, and re-import them on whichever ROM you decide to use. It's fairly easy.
There are a number of ROMs to choose from between XDA and ppcgeeks. Read some of the comments and check out what the chef includes. It will be pretty different than the official Verizon ROM you are used to, but that's usually a good thing. I currently use bbsandkm's 6.5 ROM from ppcgeeks, but that's personal preference. Ryan and TPLane here on XDA make some amazing ROMs that you can use, too.
But before you flash to any non-official ROM, please make sure you read up on the guides to do it properly. It's really pretty simple, but you need to just follow the directions.
Is the around 20MB the amount with Titanium? I love HTC Home since I can use the Today calendar. All these new plugins never show the complete day of apointments.
Yeah I would have to do some reading before I even consider. I do know I would have to downgrade to the original 6.0 OS before going custom. Would I have to go back to 6.0 again and then 6.1 if I decide I don't like 6.5? Already getting scared just thinking about it lol.
segadc said:
Is the around 20MB the amount with Titanium? I love HTC Home since I can use the Today calendar. All these new plugins never show the complete day of apointments.
Yeah I would have to do some reading before I even consider. I do know I would have to downgrade to the original 6.0 OS before going custom. Would I have to go back to 6.0 again and then 6.1 if I decide I don't like 6.5? Already getting scared just thinking about it lol.
Click to expand...
Click to collapse
In high memory mode after installing all my programs, I start with between 25 and 26 meg free. That is using Titanium.
The only reason (I think) that you'd need to downgrade to 6.0 is if your GPS does not work after your upgrade. And no, you wouldn't need to re-install 6.1 during the process.
Downgrade is necessary if you have a pri of 2.03xx and want gps to work on your custom rom.
I got so sick of this problem I just hard resetted and went for MR1. I will switch to WM6.5 maybe later in the future.
However, I notice my Titan did it again today! It barely has anything on it right now. So I am guessing my memory card might be the problem. So much stuff on it (its a 16GB) like portable apps, every cab I have ever downloaded etc. That's my only guess. Would a memory card be causing this problem?
segadc said:
I got so sick of this problem I just hard resetted and went for MR1. I will switch to WM6.5 maybe later in the future.
However, I notice my Titan did it again today! It barely has anything on it right now. So I am guessing my memory card might be the problem. So much stuff on it (its a 16GB) like portable apps, every cab I have ever downloaded etc. That's my only guess. Would a memory card be causing this problem?
Click to expand...
Click to collapse
What you are experiencing is a DSOD (dark screen of death). Usually its because of something installed to your storage card that is always running(not good, things like that need installed to device memory). Also make sure you have no .exe's in the 2577 folder on storage card (if you have the folder).
Here are some possible examples of DSOD's
Disable the automatic ActiveSync checking. This is the official solution from Verizon Data Technical Support.
Do not install software on the storage card that might trigger automatically. That means: Absolutely no today plug-ins, no ring tones, nothing that runs in the background, and nothing that could accidentally be triggered if you hit one of the buttons of your device.
Do not store data that might be accessed automatically. Same thing. Basically, do not store mail attachments on the storage card if you have wireless sync.
Close programs that use the storage card before turning your device off. Magic Button is an excellent tool to do this.
If you do install programs on the storage card, do NOT use the "Programs" window or the start menu to start them. Instead, use a File Explorer to run them. If you use "Programs" or the start menu, that program will be in your list of recently accessed applications in the start menu. So the next time you turn your device on and click on the start menu, the system will access your storage card to load the icon of the application - this will create a noticeable delay of several seconds, if not DSOD.
Don't randomly install crap. Every single piece of software you install could interfere with your system. Limit the software you install to what you really need. Check the forums, some people named a few programs that explicitly did not work for them.
I hope this helps you out.
Wow thanks, that helps a lot!
edit: Not my day. Don't ask me why but I decided to clean some registry after cleaning up my card. Well I deleted something that effects me to not see the verizon mobile site. I posted about it before here. At least now I know what I did wrong with that problem. Anyway, if I were to hard reset, will it revert back to a clean MR1 with all the Verizon stuff? So far I have been just reinstalling MR1 which does it all. The reason I ask is I hate to wait until tonight to do this again. Thanks guys.
RyanMogul6800 said:
What you are experiencing is a DSOD (dark screen of death). Usually its because of something installed to your storage card that is always running(not good, things like that need installed to device memory). Also make sure you have no .exe's in the 2577 folder on storage card (if you have the folder).
Here are some possible examples of DSOD's
Disable the automatic ActiveSync checking. This is the official solution from Verizon Data Technical Support.
Do not install software on the storage card that might trigger automatically. That means: Absolutely no today plug-ins, no ring tones, nothing that runs in the background, and nothing that could accidentally be triggered if you hit one of the buttons of your device.
Do not store data that might be accessed automatically. Same thing. Basically, do not store mail attachments on the storage card if you have wireless sync.
Close programs that use the storage card before turning your device off. Magic Button is an excellent tool to do this.
If you do install programs on the storage card, do NOT use the "Programs" window or the start menu to start them. Instead, use a File Explorer to run them. If you use "Programs" or the start menu, that program will be in your list of recently accessed applications in the start menu. So the next time you turn your device on and click on the start menu, the system will access your storage card to load the icon of the application - this will create a noticeable delay of several seconds, if not DSOD.
Don't randomly install crap. Every single piece of software you install could interfere with your system. Limit the software you install to what you really need. Check the forums, some people named a few programs that explicitly did not work for them.
I hope this helps you out.
Click to expand...
Click to collapse
Wow, you learn something new every day! Amazing writeup.
It happened again last night but I am thinking it might be caused by the latest SKTools. But not sure since I had it almost a month before this happened. I might go all day without it and see if that is the case. Then if it is the I will get the lower version.
Also, I am going crazy here, which registry edit is to take away the keyboard lag? I cannot remember if it had to do with increasing the gyphe or whatever maybe taking away the speed of the keyboard when it lights up. I just cannot remember. I looked at tons of posts here and PPcgeeks but still cannot find or figure out which one did it. Thanks guys. I need to seriously remember these registry hacks for next time.
ok: it was not SKtools. I put it back on. I decided to wipe my memory card clean and start over. So far so good! Now I will have time to find some registry edits.

Gotta learn this stuff

You guys are genious. I need serious help. First I have a services.exe error everytime I shut off or soft reset. Any one know what to do or if it even matters.
Second all this talk about running things and saving space. I need more memory saving. I don't have a clue what I really need and what I can get rid off to save oh ram. or hard drive memory too. Please tell me exactly what to do.
NExt on my HTC Imagio I want to run SBP mobile shell but I want to run TF3 too because I like the weather start up on it and I can't get to it with spb shell running someone talked about it but I can't figure out what to do based on what I read, I want to start up TF3 and then hit a button to go to shell. ANy one know how to do itl Also I have Pocket Mechanic and all kinds of tools but not SK Tools. I have Vitual Espolorer cuz I thought that would help me ID files but now that I can ID them I doh't know what I need and what I don;t. If I get SK Tools will it help me know what to do. Nothing comes with a manual anynmore. I need a detailed manual for the phone and how it works not what it does. Can anyone answer these with esplicit directions cuz I don;t know a .dll from anything else. I only know that an exe runs something, So Im really dumb about all this. ANyone know how to help. It 2:30 AM and I;ve been up all night for a week trying to figure out things on this phone. So far I like it a lot but the more I add the slower I get and I might want to add more. HELP!!!!!! Going crazy.....
OK, that's a whole lot for anyone to try to process. First things first, what's your biggest problem? The best way to get help is to knock down the issues one at a time.
The first problem is I have a services.exe error every time I turn the phone on after it's been off or any time I reset it. That's first
Based on a little Googling, it looks like the only fix for a services.exe error is a hard reset. I pasted the info on a hard reset below for you:
This will wipe all data off the phone and restore factory default settings.
1. While the phone is off, press and hold Volume Down + Talk/Send + End/Power.
2. When the device displays a message about wiping the data, release all 3 buttons.
3. Press Volume Up to complete the hard reset.
If I move all my programs I installed to my card I won't really loose anything right.,
lbreuer2 said:
If I move all my programs I installed to my card I won't really loose anything right.,
Click to expand...
Click to collapse
I don't know what programs you are trying to move, listen, just forget moving programs, back up or your files via myphone or use activesync to store everything you want on your computer. When you perform a hard reset either by the method listed or by going to Start->settings->all settings->system->memory then selecting clear storage tab, letting win mo come back up and customize then before you do anything when it restarts, hard reset again, for some reason this helps the functionality of native software. Then immediately take care of the tv icon, proxy mem. tweak, and nopifix. Then what ever you need to install try to install to your sd card via downloading from this xda site for cab files or doing a little google searching rather than installing directly from market place. EXCEPTION: DO NOT INSTALL TWEAKS TO SD CARD OR ITEMS THAT ROTATE THE SCREEN. Keep all the cab files on your pc or on your storage card so that you have them whenever you decide to hard reset or flash your device. Enjoy your imagio thing only become easier the more you use and play.
I must not have my activcesnyc set up right because the only thing it backsup is my contacts, email, journal and a file folder full of what ever I want to but in that folder but thats snyc with my docs on my devic and I don't want to over load it. When I had a palm it used to back everythng up to a file on my computr and I could just reinstall but this windows stuff doesn't seem to do it. How do I set up active sync to sync everythi ng on my devide and card to back up to my computer.? Ans I don't have a clue what you were talking aabout when you said take care of your tv and those other files, not a clue. I have mobil shell on my phone is that what your taling about not having on the phoen. You need to talk like your talking to a 12 year old when your explaining this stuff to me. Thanks. L
Sweeny Russ said:
I don't know what programs you are trying to move, listen, just forget moving programs, back up or your files via myphone or use activesync to store everything you want on your computer. When you perform a hard reset either by the method listed or by going to Start->settings->all settings->system->memory then selecting clear storage tab, letting win mo come back up and customize then before you do anything when it restarts, hard reset again, for some reason this helps the functionality of native software. Then immediately take care of the tv icon, proxy mem. tweak, and nopifix. Then what ever you need to install try to install to your sd card via downloading from this xda site for cab files or doing a little google searching rather than installing directly from market place. EXCEPTION: DO NOT INSTALL TWEAKS TO SD CARD OR ITEMS THAT ROTATE THE SCREEN. Keep all the cab files on your pc or on your storage card so that you have them whenever you decide to hard reset or flash your device. Enjoy your imagio thing only become easier the more you use and play.
Click to expand...
Click to collapse
Hey you said something about getting rid of the tv icon and other stuff after a hard reset, but never explained in detail. plz help, thx
After weeks of zero issues (aside from memory leak), I just got a barrage of services.exe errors this morning. Phone was throwing error after error even after a soft reset. After three soft resets it's finally working now (after another services.exe error). I didn't make a single change to my configuration though so I'm a big perplexed as to why these just started showing up now. I was really starting to get content with my Imagio too...sigh.

Categories

Resources