Related
Hi all,
I am unable to pair my XV6800 to my Pioneer DEH-P980BT car stereo. The phone detects the stereo and requests the PIN, but fails after I enter the PIN with a 'Cannot Connect, connection failed or pin is wrong' error. I have used this stereo with my xv6600 Blue Angel for over a year (Can you say Widcomm stack?).
Anyway, I have been unable to come up with fruitful answers or even a next good step by searching the forums or general internet searching. I am wondering if there is some kind of Bluetooth tool that would allow me to determine what actual error is occurring?
Any help would be greatly appreciated.
I had the exact same problem with the same head unit. Here's what I did to correct it:
Code:
The vario II identifies itself as a PDA bluetooth device. The pioneer modules are searching
for a phone or smartphone, so it just ignores the Vario II.
Solutions:
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone, and my pioneer unit finds it without problems.
That SHOULD work for you. Please let me know if does, because when I do it, the stereo finds the handset fine, but I can't hear any conversation coming out the speakers. It's like it is on permanent mute. This also happens with my BT headset - all controls work, but I can't hear anything nor can people hear me. Plus, my Mogul's speaker cracks and pops when I try using it with another BT device. I think it may be a bad unit. I want to know if you have better luck with the Mogul and 980BT.
I am using the newest ROM (2.17) and radio. The same thing happens to me with the older 2.09 ROM also.
sup191
Eureka!
It worked! I had tried this COD change before and had tried initiating pairing from the stereo, but had not tried both at the same time. I am able to connect the phone and bluetooth stereo simultaneously, and both are working with excellent sound quality. That's leap and bounds from where I was yesterday. Thank you very much!
Regarding your problems, I am not experiencing them at all. I can hear both sides of a conversation as can the other side. As it stands I think I will have to manually pair every time I get in the car (a pain, but I will work on it).
I am not sure what differences exists between the Hermes and Titan, but I would be happy to investigate for you wherever I can. My ROM is version 2.09 and my radio is version 1.30.
Thanks again. Feel free to post or PM me if I can help you figure your issues out.
Thanks for the offer to help. I think my first step is going to Sprint and showing them that BT is crap on my Mogul and see if they'll swap it for me. I'm also going to try pairing my headset there on the demo and see if it works. If it does, my unit it broken. I'll let ya know what happens.
sup191
not sure what is wrong...but after upgrading to the new gps rom i don't have any sound output when using headphones or and aux cable in the car. any ideas what could be wrong? perhaps there are some audio drivers or something missing in this new rom?
any ideas? thanks.
bump.
im having the exact same issue here.
works with the headset that was included with the phone but my aftermarket mini-usb to headphone jack adaptor doesnt work now
First post (been lurking awhile) - have the same issue, with a twist. Running the newly released 3.16 and the OEM HTC headset works with calls/WMPlayer/system sounds. But, using earbuds connected via a mini-usb to 3.5mm jack converter, I can listen to voicemail (so SOMETHING is working) but not music/system sounds (like voice prompts from GPS software). Anyone have a fix? I need to be able to use my 3.5mm converter while on my motorcycle!
Are you using the stock ROM and customizations? Did you copy the edited audiopara.csv? I remember seeing somewhere that the old audiopara file may not be compatible with 3.16.
Prior to installing 3.16, I was using the stock 2.09 as received from the factory - no tweaks or mods - and the mini-usb to 3.5mm converter worked then, but doesn't work fully after the 3.16 install (stock 3.16 with customizations).
i still haven't been able to fix this. i am using dcd's 2.0 beta rom and i have seen people saying that the audiopara file needs to be replaced. i haven't figured out how to do this though i get an error that its in use and cannot be replaced. if anyone can help me out and post the correct file to replace and tell me how i'd appreciate it. still no audio via headphones.
I just tried this on my phone and it works fine. Maybe it is the software setup that I have that lets it work?
Running SRS WOW HD with CorePlayer 1.1.3. Also tried TCPMP.
I also have the same problem with wmp and unfortunately i can't offer any help as to what to do with this audiopara file.
jagwoods said:
I also have the same problem with wmp and unfortunately i can't offer any help as to what to do with this audiopara file.
Click to expand...
Click to collapse
you put the audiopara file in \windows afaik. i have done this. i am just waiting till i go to work (where my adapter is) to test. if it fixes it i will post back...
edit; didnt work for me
Replacing the audiopara file didn't fix anything for me, either.
yep, replacing the audiapara file didn't fix anything for me.
please keep in mind i am only referring to using an adaptor and then using standard headphones or an aux line out. this is a pretty big problem for me, if anyone finds a fix please let me know.
bump.
searched registry for "audio" founf an entry named audio-out and it has a subfolder named pin
sounds right but i dunno
also..checking voicemail works for me as well but the volume is way too low to hear
knives of ice said:
not sure what is wrong...but after upgrading to the new gps rom i don't have any sound output when using headphones or and aux cable in the car. any ideas what could be wrong? perhaps there are some audio drivers or something missing in this new rom?
any ideas? thanks.
Click to expand...
Click to collapse
are you talking about dcd's custom 2.0 rom?
My problem is with the stock 3.16 ROM, installed with customizations.
MIK1200 said:
My problem is with the stock 3.16 ROM, installed with customizations.
Click to expand...
Click to collapse
I had a problem about 2 days into the new stock rom... audio manager wouldnt play, would only scroll through song files non-stop, windows media player wouldnt load, then my ringer stopped working.
I hard reset and re-loaded my programs 1-by-1 to make sure no probs with audio. Been working fine for 2 days now.
This is a bit of reading, but I'm trying to be as complete with the info as possible. I am running the leaked 3.16 rom with customizations on my Sprint 6800, but no other apps installed (yet) and no tweaks or hacks. I previously ran the 2.09 stock rom with customizations, and all audio output worked perfectly.
After messing with things for awhile, I can hear audio as follows:
A. Calls/Voicemail/WMPlayer/system sounds using the following:
1. OEM headset
2. Jabra wired headset when using the HTC usb to usb/2.5mm adapter
B. Call audio and Voicemail using a non-OEM headset and an aftermarket usb to usb+3.5mm adapter, but no WMPlayer or system sounds
I've done numerous soft resets and 3 hard resets to try to get audio output working as I had with the 2.09 rom. I'm no expert at these things, so I'll defer to those who mess with them more than I, but it appears to me that the leaked rom reconfigured the usb port output so that certain audio is no longer directed to a pin or pins that used to be live in prior rom versions. If this is not the case, why do I hear call and voicemail audio, but no music or system sounds, while using a non-HTC adapter? Please feel free to poke holes in my guess.
This may be what watson540 was getting at.
yes, i am using dcd's 2.0 rom...but that doesn't seem to matter as many on sprint not using a custom rom but any rom based off the leaked gps rom are having audio problems.
i get no audio using an adaptor to plug in a standard headphone jack, or a line out. i'm not talking about bluetooth headphones, but just a standard headphone with an adaptor. additionally, these are not the stock headphones that come with the mogul. anything plugged in with the adaptor no longer works on my sprint mogul and its extremely frustrating.
i have tried hard resetting, reloading the rom, and loading a differnt audiopara file...nothing works that i've tried.
The same issue.
Works OK with stock headphones, but not with this adapter:
http://www.semsons.com/2miusband3st.html
I'm still able to hear voice (phonecall, voicemail etc.) using adapter, but no sound from WMP, TCPMP etc.
Tested with modified audiopara.csv and with the original from the ROM.
Adapter worked OK with 2.17 ROM, but no luck with the new one.
mezozoy said:
Works OK with stock headphones, but not with this adapter:
http://www.semsons.com/2miusband3st.html
I'm still able to hear voice (phonecall, voicemail etc.) using adapter, but no sound from WMP, TCPMP etc.
Tested with modified audiopara.csv and with the original from the ROM.
Adapter worked OK with 2.17 ROM, but no luck with the new one.
Click to expand...
Click to collapse
I know if I have any more probs I am going to re-lock and downgrade to 2.17 until the official, but so far so good
knives, so you aren't able to use ActiveSync or charge the phone using the adapter?
Has anyone had any problems pairing their X1 with any Nissan or Inifniti cars? There seem to be some mumblings on the web about their cars and WM6 devices and I've had no luck getting it to work on my '08 G35. Thanks.
bluetooth pairing
i just checked the aproved phone list for your g35 and the x1 is not aproved by infiniti. only certain phones will link to our cars others will not
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
it also depend if you both have navagation or not
elee888 said:
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
Click to expand...
Click to collapse
I don't have the navigation so I just click the phone button, tell it I want to pair a new device, and have my X1 start searching. At least now I know it can be done. Thanks for the reply
Well... I do have the navigation. So maybe the pairing process is a little different. But it should work though, it even allows me to download the whole phonebook into the car. Something my other phones in the past did not allow me.
baashha said:
Managed to solve this now.
Of course both Merc & SE didn't have any good solutions.... so had to continue googling & XDA-ing... This is what I did:
i.) Jetware, as I posted earlier has been removed.
ii.) I still had the SAP Profile addition downloaded from one of the forums in XDA on.
iii.) Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
the default is 5898764 (Decimal) which is "Telephone (Smartphone)" which you would think would work. Changed to 5374476 (Decimal) which is a normal phone.
iv.) Restarted the phone.
v.) Started the pairing process from the car - failed as per before.
vi.) Started the pairing from the phone, and they work!!
Now, they pair automatically as how they would before....
Ram
Click to expand...
Click to collapse
this is how i got mine working with my pioneer deck.
here's the link to the SAP Profile he was talking about.
http://forum.xda-developers.com/showpost.php?p=997872&postcount=166
hope this works for you.
which PIoneer do you have?
I have the DEH-P5900IB and a BT adapter, and i can't get my X1 connect.
All my previous phones worked fine.
it looks like the X1 won't let me pair without passcode, and the radio says Error.
Do you mind explaining exactly how you did it?
Thanks
i have the DEH-790BT.
what i did was after i changed what i mentioned above, then i set my deck to be able to be noticed by other bluetooth devices, then added it through my X1. After I added it through my phone it said successfully connected on my deck and the phone displayed it connected as wireless stereo and hands free. now the only weird thing was it was trying to connect as both the wireless stereo and hands free which seemed to mess with the deck, so I had to turn off my ignition and turn my car back on for it to actually recognize the connection fully. oh and the passcode if you connect through the deck to phone like I did it should be default '0000' but i would check your manual just to be safe, and if your connecting through your phone to the deck (which i haven't tested so I don't know if it works) you can pick your own passcode, which i suggest just making 0000 or nothing.
I have a problem also with my HTC Touch HD (Blackstone)
I can pair with my Nissan Qashqai carkit but soun dis very bad, and the caller on the otherside doesn;t hear anything.
Strangly, but try, when during a call i switch from carkit to phone and back (using the options in my carkit/buttons on stearing wheel) everything is fine!
Checking the internet learned me that this is related to the bluetooth stack (or settings) in WM6.1 (and 6.5 also)
So does anybody have any idea how to solve this, maybe by registry changes or maybe by even "downgrading" the Bluetoorh stack to 6.0 or maybe even 5.x.
Maybe it is also possible to replace the complete MS stack for an other stack?
To one and all,
Two purposes for this thread:
Generally - I'm hoping it will be a good place for all the people (like me) that have tried to get a solution for this issue in so many forums (over so many years)and have simply been told "you need the wired headset for an antenna", to register their interest in a solution - hopefully a bit of chat and interest will finally yeild a solution. A simple +1 should suffice.
Specifically - I listen to FM Radio via my wired headset on my windows mobile device for about 3 hours a day what I would like to do:
I would like to use my wired headset (or some alternate antenna solution - for me to choose, ultimately providing a suitably strong FM signal to my device).
I will then conceal this antenna (depending what it is will depend how I do it (no rude remarks required ;o) )) and then put the mobile phone and the antenna in my pocket.
I then want to listen to FM radio via free to air (not streamed via the internet - data in AUS is expensive, I don't want a sub thread about who I'm with and alternate data plans) A2DP compliant bluetooth stereo headphones.
I am not asking for RDS, although I may look for a radio app with this later.
I am not asking for TMC.
I know this will drain my battery - I can manage this.
I know I could continue to use my wired heaset, however, I and many others based on my XDA and general iternet searching would like a nice simple solution to the above if any developer(s) are able to assist, I and I believe many others with similar non-existant coding skills, would appreciate it very much.
I am not intending to be rude, I have tried to be very specific about my requirements, I am trying to demonstrate that I have done some research and have hopefully highlighted that I do not need any "you need the wired headset for FM Radio therefore it can't be done" type answers.
I am very interested in this community and it's ability to rise to the "I can do that" approach which is why I am posting here.
Any feedback, greatly appreciated - especially if you can point me in the direction of a solution!
Kind regards
apj_apj
How to hide the antenna, I do not know, just using a small adapter with USM for Jack, he was short and easy to hide from the waist bag in his pocket jeans.
Even better quality of reception.
And to transfer the sound to Bluetooth use the excellent program BTFM Radio v1.51
Thanks very much mrTag. I've downloaded the application, can't read or translate the readme.txt or the whatsnew.txt so will just have to have a go I suppose! Does anyone know where there is an English equivalent?
My new windows mobile arrives in about 2 - 3 days, my current one died, so I will let you know how I go when I get it and try it out.
Thanks again for the quick response and the possible solution to my problems!
Here is a rough translation
Retransmission FM radio to bluetooth A2DP headset
Version 1.51 Freeware
Copyright (c) 2009 DM Kuznetsov
The program is designed for listening to FM radio on wireless
stereo headset (A2DP).
Additional features:
o Wireless "proslushka" - broadcast audio stream from the microphone / wired headset kpc.
o Record audio (including radio) "on the fly to mp3.
Supported bit rates: 32-320Kbps, stereo.
Directory of audio-recording is set up, you can use a memory card.
(bitrate affects the download)
(!) To carry out the recording must have EmzMp3EncDll.dll in the directory Windows.
(EmzMp3EncDll.dll initially present on the Samsung i740)
o Automatic launch and management of FM Radio.
(Adjusting for the application supported)
o Close the program and launch a selected application from the command sets.
(S2P default)
o Management of all functions of the program directly from the headset.
It supports AVRCP.
Fully to orig. FM Radio Samsung i740, partly for other devices.
button on the headset:
Play_Pause - start / stop transmission
Stop - search / switching stations to a standard Radio i740
(length, pressing Play_Pause).
Forward / FF - leafing forward (Right click you send to the radio box)
Backward / REW - searching backwards (pressing a button sends the Left in the radio box)
FF dL. Pressing - start / stop recording
REW dL. Pressing - to close the radio, run a given application
(such as S2P)
Long-click option is confirmed by a beep, then you can release the button.
(default is playing default.wav)
Broadcast radio is available at:
Samsung i740
RoverPC N6
RoverPC V7
RoverPC X7
HTC Touch HD
Samsung i900 (only when using the headset with a microphone switched)
Possibly incompatible with other devices.
If your KVM is not on the list, but successful radio broadcast, please send me
the name of your KVM to supplement the list of compatible.
(!) When the button will not work, use the S2U2!
Use:
1. Connect the wired headset as an antenna
2. Try and include radio
3. System volume to maximum, the radio volume to maximum.
3. Connect A2DP headset, and open the Audio Gateway
4. Run BTFM_Radio
5. Click "Start"
6. Adjust the volume levels in the acc. with personal preferences.
Thanks heaps mrTag, you're a champion! My device is still stuck with DHL so will try it out as soon as I have it in my hands.
Regards
apj_apj
This sounds like the answer to my problems too. The only problem I have is the link doesn't seem to work ("resource not found" message). Any ideas?
Indeed, the site is unavailable.
You can put files here.
Cool
mrTAG said:
Indeed, the site is unavailable.
You can put files here.
Click to expand...
Click to collapse
I've been trying to listen my HTC Topaz radio via my Bluetooth CrashHelmet.
This works - allbeit just one speaker (mono).
Great Thx!
Almost there!
@mrTAG,
I've given BTFM Radio v1.51 a try on my Acer M900 handheld. Its native FM tuner application allows toggling the sound between the wired headsets (which act as antenna) and the device's loudspeaker.
I can't read anything in russian, but I've noticed that BTFM Radio broadcasts sound to my A2DP headsets only when FM sound has been toggled to the loudspeaker, and I tap on the upper left button on the application's screen. Nevertheless, the loudspeaker sound is not cut off at all, for what I have FM sound coming from both my A2DP headsets and the device's loudspeaker. There's not much point in such a behaviour, don't you think? I wonder if I missing some settings, due to my complete ignorance in reading russian. Any hints?
Furthermore, could you give me some guidance in reading the application buttons and settings in general, because I don't have a russian keyboard to try to enter what they are showing, on an online translation tool.
Thanks, anyway.
Cheers!
Carlos
I am unfortunately not a developer program.
Try to disassemble the program and translated into English.
But I'm afraid you do not help, most likely your device is not supported
I was looking for a program like this. One question: does this app integrate well with calls? I mean, if you're listening to radio and a call is received, radio is stopped and you can handle the call? I have a a2dp headset for my helmet and it would be great to be able to listen the radio and answer the calls while riding...
Thanks!
i am going to try this program with my Samsung omnia i900.
And btw, i found out a way to translate the notepad and readme to
english. please find attached files for he english translated readme and whatsnew.txt from the files.
mrTAG said:
I am unfortunately not a developer program.
Try to disassemble the program and translated into English.
But I'm afraid you do not help, most likely your device is not supported
Click to expand...
Click to collapse
my Gigabyte GSmart S1200 is not supported too.
I run BTFM_Radio.exe, then press the left top button out of the four buttons, resulting in an error prompts in Russian, which I don't understand the meaning..........
BBCBBA said:
my Gigabyte GSmart S1200 is not supported too.
I run BTFM_Radio.exe, then press the left top button out of the four buttons, resulting in an error prompts in Russian, which I don't understand the meaning..........
Click to expand...
Click to collapse
I wonder if your A2DP connection was already active, before you tapped on the first button. I don't read russian either, but I remember seeing a popup window once, when I had forgotten to activate A2DP beforehand.
Well, just for the records, after e-mailing Dmitriy, the developer himself, I've been told that the 1st button is "Start", the 2nd one is "Stop", the 3rd one is "Record" (provided that you have EmzMp3EncDll.dll on your \Windows directory) and the 4th one is "Exit".
Just my 2 cents...
Cheers!
Carlos
pjerom said:
i am going to try this program with my Samsung omnia i900.
And btw, i found out a way to translate the notepad and readme to
english. please find attached files for he english translated readme and whatsnew.txt from the files.
Click to expand...
Click to collapse
I tried it also on a Samsung Omnia i900 but it doesn't affect the radio output, unfotunately! Sill unable to listen to the radio FM on the bluetooth headset.
cool, works for me but i have the radio playing out of both my phone speeker and my bluetooth headset...
any solution? if i turn down the volume it also turns it down on headset...
waiting on my stereo BT HS, meanwhile tried with mono and dosnt work, after playing with it (i dont read russian) when i change advanced bt audio setting to just audio headset goes into feed back like mic is wid open but no radio, i am hoping it will work when i get stereo HS.
FYI i have anadapter for 3.5 & charging and that allows me to listen to radio without the HS that comes with the phone i note these have 6 pins inside ware mii usb for connecting to pc has 5.
thanks for this program either way i've been searching and its closest i've come yet.
Here is the reposted link for the app hope its of use for all
After trying al lot off "software-solutions". I've got the best result with a little conector on my HTC Touch Diamond2 T5353 (HTC Topaz 100).
It's a little thing wich you can plug in via mini-usb, and out there is a headphoneconnector (mini-usb), mini-usb and an audio-jack.
In the audio-jack I plug in my bluetooth adaptor (dongle) of my blackbeat906 headset.
So I save my phonebattery and the adaptor works as an fm-antenna.
Hi ,
Much appreciate your having posted this file in the forum as its unavailable at the earlier mentioned url, however I'm unable to download it it gets downloaded as a .php file and not the .zip file its meant to be.
Also would this work on sony ericsson Elm ( I need a Java version please....)which has its inbuilt RDS radio.
many thanks
Best Regds
Tom
PS: are you able to re-post and or redirect me to the right place for the above please?
There are a lot of problems with carkit connections & the HD2.
I tried several things to get it working without success.
When I try to connect to the JVC KD-AVX44 it connects but give no sound at all. (making 2 connections, handsfree & stereo audio)
Then I tried the registry tweak mentioned into this forum and had success once. I was very happy because also the title track was shown onto the JVC display and also the phone was functioning ok both ways.
The sound trough AD2P was perfect. Only one time.
After that i get a lot of disconnects.
Then I tried to make only connection with the phone function and this is working ok now. When I want to make the connection trough AD2P then the problem is back. Also when you make it without making the phone connection
So I think the problem lies into the stereo connection. For instance when you skip a track onto the JVC then the connection will be lost and reconect again and giving 2 seconds of sound and then it's quiet again.
Also when to 2 connections exists the phone is blocked by incomming calls because it's thinking it's connected so the earpiece & mic are dead at that time. And also the radio.
Did you try the LineSpeed setting to 256 in the AV key of the Widcomm registry settings ?
Don't know if it could help in your case but it did for me, I don't have disconnects with my Sony headphones anymore and sound is better.
Bluetooth
Ok thx I will give it a try and post the results.
which registry tweak did you applied first, cause i too keep having issues...?
tweak
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone
Do I have to add this line somewhere? I found the AV key into widcomm but the line was not there
valos said:
After that i get a lot of disconnects.
Click to expand...
Click to collapse
Try turning WiFi off on the phone, it makes a big difference on my IO Play system.
valos said:
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone
Click to expand...
Click to collapse
Ok i make this in my BMW X5 and one of problems is solved - HD2 working correct when i am on call and power the car, but i have another problem - after 5 - 6 min on call Bluetooth connections is droped and i can't lisen nothing from Car or for Phone - i must to press Menu and switch off Hands free to continue conversation.
Ok but are you also making stereo connection. I only have the handsfree conected at this time and then the connection is stable. Only with the A2DP it goes wrong.
valos said:
Do I have to add this line somewhere? I found the AV key into widcomm but the line was not there
Click to expand...
Click to collapse
Yes, you have to add the key, sorry not have said that.
kmeta said:
Ok i make this in my BMW X5 and one of problems is solved - HD2 working correct when i am on call and power the car, but i have another problem - after 5 - 6 min on call Bluetooth connections is droped and i can't lisen nothing from Car or for Phone - i must to press Menu and switch off Hands free to continue conversation.
Click to expand...
Click to collapse
Strange, so far I didn't experience any disconnection.
I have conversations during more than 20 minutes daily and line quality is far better than with my Diamond, with no drops.
With the Diamond I had the BT stopping regularily on the phone, it was very annoying because I always discovered it when receiving a call and not being able to answer.
So far it didn't happen on the HD2, but it is really too soon to jump to any conclusion.
I don't use A2DP in the car as I didn't order the option, which I viewed as useless because the hard disk capacity of the iDrive is sufficient to hold a good collection, the audio quality and functionality is much better and I can still connect the phone to the USB plug as mass storage if I want to play or transfer something from it or any memory stick or external HD.
So maybe not having the A2DP profile active may help also.
I also not any problem with my old HTD HD and Cruize ... but with HD2 i have this issue.
Today i receive answer of my ticket from HTC: they offer me to contact with BMW and to ask them why they not support HD2 ... I think this is stupid becouse every new device must support old protocols and older devices.
Now the choice is to change Car or Phone ... sorry but HD2 not have any chance to survive.
kmeta said:
I also not any problem with my old HTD HD and Cruize ... but with HD2 i have this issue.
Today i receive answer of my ticket from HTC: they offer me to contact with BMW and to ask them why they not support HD2 ... I think this is stupid becouse every new device must support old protocols and older devices.
Now the choice is to change Car or Phone ... sorry but HD2 not have any chance to survive.
Click to expand...
Click to collapse
Yes how lousy is that
Got the same answer first, but they realised that BMW coudn't recall thousands of vehicles to do a BT upgrade just because HTC decided to adopt the crapy Widcomm BT stack.
So they say they are working on a fix, but given how many issues there are with this stack, they better switch back to the old MS stack instead.
To be clear, it is the Widcomm stack at fault here, not BMW. Every single phone not equipped with this stack, I could try on the BMW, worked flawlesly.
I hope they will recognise this officialy and not blame the others each time a customer opens a ticket about these flaws.
In the meantime, the registry hack works perfectly for handsfree profile, but it seems it doesn't fix everything when the A2DP profile is activated.
MacGyver4321 said:
Yes how lousy is that
Got the same answer first, but they realised that BMW coudn't recall thousands of vehicles to do a BT upgrade just because HTC decided to adopt the crapy Widcomm BT stack.
So they say they are working on a fix, but given how many issues there are with this stack, they better switch back to the old MS stack instead.
To be clear, it is the Widcomm stack at fault here, not BMW. Every single phone not equipped with this stack, I could try on the BMW, worked flawlesly.
I hope they will recognise this officialy and not blame the others each time a customer opens a ticket about these flaws.
In the meantime, the registry hack works perfectly for handsfree profile, but it seems it doesn't fix everything when the A2DP profile is activated.
Click to expand...
Click to collapse
After much playing around - I found a linespeed of 300 works best for the HD2. 256 still has questionable quality and 320 for some reason skips a lot. Reducing it to 300 seems to be a workable equilibrium!