I was looking around for a slim fit case for my tilt since I do not want to make any scratches on it's beautiful body, I found out that most online stores sell the rubberized case for $30+, I digged on eBay and I just won and received my case same as this auction
It cost me only $9.20 total, which is way cheaper than most other website charges.
The case fits perfect on my Tilt, it's rubberized so it's got a great feeling when u touch it. I've included some photos below of the case I got. I think it's a great bargan and just want to share this info w u guys.
Look at the quality of this product, it's made in China alrite, but it's of good quality(for $9...).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clipper is not installed, I just put it on for reference of how it will look like with a clipper. I personally do not use clipper.
Cheers
Thanks. Looks perfect and not too bulky. Also the recess will make finding the d**mn on/off button easier
I've owned a couple of these (rubberized & non-rubberized) and the lack of bevel on the front makes it hard to use the soft keys and scroll bar.
AFAIK, the only rubberized case that does have a bevelled front is from Seidio.
paolofat said:
Thanks. Looks perfect and not too bulky. Also the recess will make finding the d**mn on/off button easier
Click to expand...
Click to collapse
I agree with you, there is actually quite some recess on the side buttons and the front. Made it really easy to press the buttons, especially the d*** on/off button.
The front is actually beveled Alex, and have a bit of space around the keys so pressing the front button is no pain at all (I have a small hand and that's prob why)
It's $9, what you got to lose
shame he won't ship to europe (uk) :/
lifanus said:
I agree with you, there is actually quite some recess on the side buttons and the front. Made it really easy to press the buttons, especially the d*** on/off button.
The front is actually beveled Alex, and have a bit of space around the keys so pressing the front button is no pain at all (I have a small hand and that's prob why)
It's $9, what you got to lose
Click to expand...
Click to collapse
Why pay $9 when I've paid $3.24 for it on Amazon?
http://www.amazon.com/exec/obidos/t..._shr?_encoding=UTF8&m=A1TB4CRIUIFO5O&v=glance
BTW, I still prefer the Seidio one over this one...
thanks for the tip alex, I just ordered this two days ago for $6 shipped from amazon, just got here today...damn fast shipping! Anyways, it's what I would expect for only $6, it doesn't fit perfect, I still can't get one edge to snap on.
this is okay though, because just last night I dropped my phone getting out of the car, and my screen stopped working for about a half hour. Scary half hour for sure, I thought for sure I would be swapping out a screen. So this should help, if not just for peace of mind.
Recommended
I ordered this from Amazon too, because I really wanted to try out the clip. Put it on for 5 minutes to try it out, and after discovering the same thing as you (it doesn't fit properly on the top), I quickly decided to go back to the Seidio model.
It took me 10 minutes to remove the case from the bottom of my phone
You get what you pay for. Lesson learned.
I purchased the Luxmo case too. The bottom right tab of the top case did not fit too. The solution is to use sandpaper. Do not sand the tab but the frame under the tab from the inside.
I will try the sandpaper method. Other issues I'm having with the case is charging and syncing cables. The factory Tilt charging cable doesn't push all the way in with this case, however it is enough to charge, and I am just barely able to use my 3.5mm audio adapter for in car use. I'm going to make some modifications, hell it's only $6 anyways.
Just bought this. Put it on. I liked it. Wanted to try out the belt clip so I tried to take it off. The front clip broke off. Piece of crap IMHO. Going with the $32 Seidio super slim rubberized case. Would rather have something that lasts longer and can be removed. Hell I'd rather buy just 1 Seidio case then buy 3 cheap ones.
Kraize
I just bought this on amazon, ill risk it, and if the one corner doesnt fit - ill see what i can to do sand the inside corner. -i doubt ill be taking it off after i put it on so, im not worried bout it breaking with the removal procedure
I didn't really think I'd be removing it either. But I just wanted to see how it looked with the clip. Just ordered a Seidio one. I know that the seidio one is good :]
Fits perfect! No gap or uneven, ALL corners fit! (the one off amazon for 3$ something) Yes!!
i bought 2 cases of transparent plastic and was a big ****
I purchased the one from amazon. I am not a fan of the clip, I prefer a pouch. The thing only cost $6 with shipping. I really like it. Worth it. I wish the edges where it was coated could have been a bit nicer but hey....it was only 6 bucks to my door.
afliction523 said:
I purchased the one from amazon. I am not a fan of the clip, I prefer a pouch. The thing only cost $6 with shipping. I really like it. Worth it. I wish the edges where it was coated could have been a bit nicer but hey....it was only 6 bucks to my door.
Click to expand...
Click to collapse
exactly which one ?
Its from accesory one. This is the link. http://www.amazon.com/SOLID-RUBBERI..._1_9?ie=UTF8&s=wireless&qid=1216076111&sr=8-9
I bought the one off eBay from the first post.
Pros:
Fits GREAT on my Tilt, and is easy to put on. It does exactly what I need it to do, which is keep the stock shell nice and stop it from sliding around in my pocket so much if I'm wearing cargo shorts. Nice feel/grip when talking or surfing.
Cons:
This shell won't give your device a better chance of suriving a fall. I don't think these devices "bounce test" well
thanks for the amazon references..id never have thought to look on amazon for cases..ever since ive had my 8525 ive gotten cases off ebay..clear ones..smoke clear ones...and since ive had my att tilt ive gotten a smoke clear one which fit perfectly but one of the tabs broke and ive always had this happen and just makeshifted superglue to make a tab but with this recent purchase on ebay of the rubberized case..the bottom right corner of the top piece didnt fit and no matter how hard i tried i couldnt get it to stay because the case was just a tad to small in width on the bottom so only one tab would be in place at a time so when i feel neccessary ill try the ones on amazon..ive always used cases not to keep it from breaking on impact but to keep scratches away because ive dropped my phone many many times and it has slid across parkinglots and if it werent for these cheapo cases id wouldnt be able to resell them at a good price when i want to by the next model release ;-)
Related
like today screen, let's post our magician case.
this is mine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Default/Standard/Bundled/Free/Generic case.
I have Covertec black leather case...
very nice case.. I've had it since August, and it is still in a great condition...
Build quality is very good.. and it's way much better the the standard case for the JAM.
it also has 2 mini pockets for your extra memory cards... I usualy keep my music stored in a seperate SD... and thus, this case becomes quiet handy :wink:
i have the one it came with which i barely use, and also i bought the silicone one which i dont use much either because it sticks to clothe so its tough to put in/out of my pocket.
Here's mine! Krusell is very comfortable. Using it couple of months. Still good!
stratoboom: that's cute, where'd you get it?
I have a silicon case which is ok, but in the end I just found some adhesive foil which I covered the back of my magician (and ipod) with. It looks similar to the original and protects it when i throw it on the desk. It's useless for shocks/drops, but then I never touch my phone without slipping my finger through the loop.
V
I love mine with a silicon skin. The one I purchased from ebay is the thin silicon skin that comes in 5 colours ...didn't like the one with the protective screen cover, too thick the skin.
The skin makes my phone-PDA stands out..whenever I take it out to answer phone or use the PDa function, everyone nearby just stares at it :-D
O2mini_noob: I got a silicon one in pastel blue and white. Haven't used it for a while, I'll have to pull it out again!
V
the pastel light blue I am using at the moment..it makes my o2 mini look like light bluish grey which is very striking.
The flourescent green and pink look outstanding too although pink is more suited for gals.
i found it on ebay.
it's great.... first days plastic is very heavy and sometimes there is not contact between stilus and screen
after couple of days, leather and screen cover get magicians shape and now i use only my fingers ; )
the best case i ever buyed.....
Boxwave Flexiskin is amazing..I just put it on today...looks like by far the thinnest skin you can find for the Magician. Whereby most silicon skins today add weight and thickness to the Magician plus not contoured to fit charging cradles..the Flexiskin from Boxwave makes you feel like you're using a naked mini.
The button skin is incredible...you can actually feel the symbols on those buttons. It is the must have skin !!
My pocket is 2 small 2 plus a case on XDAmini......
I use a Piel-Frama Case (did so with my old iPAQ too) and I love them. They may be a bit expensive but are worth every penny. I got a black leather one though.
Hi,
I have the same as your with a slight modification.
I have cut out the plastic front to give acess to the screen.
and added a hard leather cover for the screen
Regards
And this is the reason (the case) why i dont want to replace my JAM to KJAM...
zpdy said:
And this is the reason (the case) why i dont want to replace my JAM to KJAM...
Click to expand...
Click to collapse
i had this case and absolutely hated it. first up, i hated having to always open the cover to access the screen (it was a process). secondly, it made my Jam a lot bulkier looking, and a lot of my friends would comment that i look like a "moron" with the case on my phone. i ditched and i got a silicone case with an attached belt clip. i garner a lot more respect now. 8)
Private-Cowboy said:
I use a Piel-Frama Case (did so with my old iPAQ too) and I love them. They may be a bit expensive but are worth every penny. I got a black leather one though.
Click to expand...
Click to collapse
Hey Private-Cowboy, I have a Piel Frama for my Mini too!
But it's the two-toned black/tan one.
Anyone here using a Vaja?
here is mine. a tad too bulky, but i like it. Makes the phone quite bit thicker.
http://www.pdair.com/scripts/main/viewitem_v2.php?itemid=293&pdaid=88
O2mini_noob said:
Boxwave Flexiskin is amazing..I just put it on today...looks like by far the thinnest skin you can find for the Magician. Whereby most silicon skins today add weight and thickness to the Magician plus not contoured to fit charging cradles..the Flexiskin from Boxwave makes you feel like you're using a naked mini.
The button skin is incredible...you can actually feel the symbols on those buttons. It is the must have skin !!
Click to expand...
Click to collapse
Shop or ebay? got any pictures? I've been thinking about getting a silicon cover as I currently only use the cover which came with my mini.
cheers, marto
I've tried a few cases and by far the best is the CAPDASE. It's an Aluminium case with a double hinge. Only fault is the window is smaller than the Pdair and is offset to the left.
My main criteria for a case is that it must protect the PDA, be easy to use and not bulk up the unit as did the pdair case.
I also had to make a minor modification in order to get access to the stylus. Otherwise a great case.
I purchased this case from daydeal.com
http://www.daydeal.com/product.php?productid=28226&cat=3920
And it puts pressure on both the outer edge of the touch screen and the touch pad at the base of the machine. The fit is great, but this button/screen pressure renders the screen and buttons useless.
If anyone has any advice other than throwing this in the garbage, please let me know. I've considered a dremmel tool session, but I'm not sure it's worth it on such an inexpensive part.
Buyer beware!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sand it down using a nail filer.
I agree. It seems that several cases like this have the same problem. I used a small knife, but you can use just about anything to scrape down the inner mold remnants and then it works fine.
Well, sure... thanks. Like I said, I might break out the dremmel tool and do a nice finishing job on this.
The main point is that we shouldn't HAVE to alter products to make them have their basic function. To me, this is like buying car tires that are square, and all you have to do is shave off the corners until they're round so they can roll. $13, or however much it is going for these days, is really quite expensive for two pieces of plastic. It's even more expensive when they don't work out of the box.
So, buyer beware.
Would it have been so tough to include the case name into the thread title? Generically mystery threads ain't cool...
I got a similar case... but all I did was spend 2 hours of filing lol... sucked but works great so far.. hopefully the coating doesn't peel off anytime soon.. not bad for a 9 dollar case on ebay
mine it's transparent any suggestions?
ekruse said:
I purchased this case from daydeal.com
http://www.daydeal.com/product.php?productid=28226&cat=3920
And it puts pressure on both the outer edge of the touch screen and the touch pad at the base of the machine. The fit is great, but this button/screen pressure renders the screen and buttons useless.
If anyone has any advice other than throwing this in the garbage, please let me know. I've considered a dremmel tool session, but I'm not sure it's worth it on such an inexpensive part.
Buyer beware!
Click to expand...
Click to collapse
Thanks!!! I got my case the same night I loaded a new ROM. My case only caused intermittant problems, so I thought it was the ROM. I was getting ready to flash to the previous ROM when I read this thread. I removed the case and have not had the problem since. My case was clear also. My solution was to throw the case away and order a different style case.
Is this just as bad..
I was looking at possibly getting this case for my Fuze, then I seen this thread. This case looks pretty much the same, but not sure as how
it will fit, and I rather not purchase something that will cause problems.
It's from a different website, but could potentially have the same issue.
Anyone think it's worth it? Or just forget that style of case altogether?
Also wondering, if these types of cases hender in when your trying to acess the 'softkeys' on the screen [the lil calender & contacts spot]. I like being able to slide my thumb from there to the buttons, but i was wonder if the lil spot between could become a problem. Thanks.
http://www.wirelessground.com/fuzeobcsmoke.html
i love the black rubberized case. i got it off of ebay and just sanded down the inside with some rough sandpaper. i painted the inside black because the edges show and now it looks great.
I bought something similar, but it was the black silicon case, so it is flexible. It's a bit annoying at times, as it is flimsy, but it does what I need it to do. I picked this thing up for around $6 shipped on ebay.
If you read my thread at http://forum.xda-developers.com/showthread.php?t=459761 you will see what I did. All I did was sand down the inside upper left of the case and it has worked perfectly ever since. I posted pictures in the thread also. Hope that helps.
The case is really great, after you take the pressure off the inside upper left corner.
For what it's worth...I have this case in pink and I haven't had a single problem. I put it on the second day I had my device and it's been on ever since (only removed a couple of times to get to sd and sim).
I didn't need to file anything down. Maybe the difference is in the manufacturing of the color lot.
For those who don't mind spending a little more to protect their investment...(To me it's a BIG investment) http://www.noreveusa.com/product/HTC_P4600_-_HTC_Touch_Pro_Tradition_leather_case.html All buttons and interfaces accessible. Great protection!!
Seidio Innocase
Got my from Seidio and no mods was needed. Touch worked perfectly right out of the box. Link take you to the case and the clip combo, but if you choose not to use the clip, the case can be purchased by itself.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
I have that case. . just went ahead and ground it down a bit. . ain't no thang at all. But before doing that, it did mess the screen up.
jlee1026 said:
Got my from Seidio and no mods was needed. Touch worked perfectly right out of the box. Link take you to the case and the clip combo, but if you choose not to use the clip, the case can be purchased by itself.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Click to expand...
Click to collapse
50 bucks?!
Man. . I think I paid like 5.
I know that's with clip, but holy crap that's a lot for that case.
ekruse said:
Well, sure... thanks. Like I said, I might break out the dremmel tool and do a nice finishing job on this.
The main point is that we shouldn't HAVE to alter products to make them have their basic function. To me, this is like buying car tires that are square, and all you have to do is shave off the corners until they're round so they can roll. $13, or however much it is going for these days, is really quite expensive for two pieces of plastic.
It's even more expensive when they don't work out of the box.
Click to expand...
Click to collapse
So, buyer beware.
Click to expand...
Click to collapse
Couldnt agree more,I bought a new fuze from att and when it got here the spring or the slide one was way loose,it clicked when you are talking on it, called to get a replacement exchange the day after, I was told I would have to BUY another phone and when they recieved mine they would credit me.I am still p.o.ed,I told they lady that I already paid for a new phone and apparently didnt get one and this wasnt right.
at&t version of the case
I haven't noticed any problems with the "same style" case offered by at&t, but, I popped the top cover off of mine. I have a "invisible shield" screen protector on my Fuze, and noticed a slight indentation on the top left corner, and I also noticed a slight indentation above the left & right areas above the "HTC" logo at the bottom of the screen. Like I said, I haven't noticed the problems pointed out here, but I thought that if I'm seeing an indentation on the invisible shield,
then there has to be some pressure being applied to the screen. I went ahead and shaved the areas noted with the red in the photo below. Hope this helps.
I got a similar case off ebay too:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220306410400&ssPageName=ADME:X:RTQ:US:1123
works great. no need for filing whatsoever.
The Krusell HTC Touch Pro Orbit Flex case is no exception to this rule, it’s a little rough around the edges and plays host to some decidedly inconsistent stitching and some other almost unnoticeable but poor aspects of its overall finish.It does, however, boast some features I’ve encountered on other Krusell cases. For example, the top flap that normally covers and protects the screen of the phone can easily and quickly be entirely removed from the case by means of a slide-in plastic clip. This allows you to remove and pocket said flap when you’re planning on using the phone for a significant period of time and don’t want it getting in the way.On the down side (or up side, depending on your belt-clip preferences), and again like previous Krusell cases, the Orbit Flex comes with a “multidapt” hardpoint on the back of the case, which can’t be removed to make the case as perfectly pocketable as I think it should be. Belt clips are a matter of preference, however, so I can’t outright chalk this up as a minus for the Krusell Orbit Flex, if you’re into creating Batman-like utility belts then it should be right up your alley.A definite plus is the transparent plastic window in the case under which you’re supposed to tuck the HTC Touch Pro keyboard. It’s a little bit tricky to get it seated properly but once you do it will adequately protect your keys from dust and grime in addition to very securely holding your phone inside the case.The mix of black and cream leather with complimenting stitching makes the Orbit Flex look quite good if you don’t examine it too closely, the black exterior and cream interior is an eminently professional look which I’m quite fond of. It trumps any single tone case immediately and adds a bit of interest to what would otherwise be an overwhelmingly black phone in an overwhelmingly black case.Overall, the Krusell Orbit Flex is a cracking case for your HTC Touch Pro, for the money. If you want to loose a few features, despise belt clips or simply want to go full on “designer” with a much better finish then you’ll be wanting to give it a miss, but if you want a striking leather case for little over £20 then it’s certainly an option worth considering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Review By Kevin
Dr.Windows Mobile Master
I used a Krusell leather case with my Sony CLIÉ for several years and it is still on the device, even though I don't use it any more. It is still so nice I don't have the heart to through it away...David.
Thanks for the information. I have owned two Krusell cases for other devices and loved them. The Multidapt belt clip is by far the best I have used.
I assume this will fit the Fuze? Does anyone know for sure?
Thanks!
@MagicSpeller,
yes, confirmed it's and will fit the Fuze.
one thing I don't like, though: it's very cumbersome to put in (and out, subsequently) the plastic wrap portion which protect the keyboard and provide grip to the phone.
I'm sorry, i never got these cases for phones that have a slide out keyboard. for a phone without a slide-out keyboard, that makes sense but not one with a keyboard. You slide out the keyboard and the case is hanging off the side. Really not useful in my opinion.
Can any1 post some of their own pictures of this case.Thx
sanjsrik said:
I'm sorry, i never got these cases for phones that have a slide out keyboard. for a phone without a slide-out keyboard, that makes sense but not one with a keyboard. You slide out the keyboard and the case is hanging off the side. Really not useful in my opinion.
Click to expand...
Click to collapse
Now, what is your ideal opinion of a leather case that [when] 'you slide out the keyboard, the case [won't] hanging off the side'? such thing doesn't even exist, yet.
Unless you're referring to a two piece rubberized soft case, which I think looks cheesy, and, dorky.
I have had a few krusell cases for palms and HTC devices. Their warranty is really good. The quality though is another matter. I should point out at this point I am an extremely careful user of my mobile so not ham fisted. But for my tytn I had two cases replaced on warranty because the multidapt adapter plate which is stitched into the back of the case kept splitting. The third case has just failed with the plastic welds giving up on this same fixing plate so it fell off the back of the case. This is after 3 weeks of use. I am always careful to remove the phone from my belt before sitting or getting in a car etc, so there is no excuse for these to fail like this. The last case broke just as I got back to my car and was unlocking the car. I have attached a photo of this latest failure, the belt clip on this is the non swivel type. The non swivel clip is frankly rubbish. After opening the clip a couple of times the hinge pin works its way out. On the swivle clips the flaw is the spring metal weakens. The cases are great though definitely one of the better ones out there with a manufacturer that honours its lifetime warranty, but the multidapt and associated plastics are a really badly flawed design. I am now off to claim yet another replacement under warranty, if you dont want a belt clip then I dont think you can do better for a leather case that you put in your pocket.
A cousin of mine needs it. Where to find it.
Thanks
play.com are doing it for 4.99 free delivery!
Hi guys,
Not advertising it - although I should because I bought one from play.com few days ago for 4.99 GBP!!
I couldn't believe the offer, too good to be true I thought.
But the only thing I don't like about it is the plastic that goes over your keyboard and under the screen - so holds the phone very safe indeed.
But I feel paranoid that the front is going to snap off - the see-through plastic seems to be forcing the top cover out a bit...Or it's me being paranoid?
Anyone else feel this way who owns one of these?
Good luck all!
Anyone know if this case will fit with the seidio 2000mah battery installed?
krussell cases are garbage, not only did it break my phone because of the plastic straps that under the sliding part, but the case never fit right and awlays hit my scroll key, thus my battery was always crap, also the clip broke...I would stay away from made in china piece of crap krussell
I will update this thread tonight with pictures and an in depth review. I was in a Canadian Best Buy close to work and saw this case below the tablet area. I had read mixed things about Acer rubbery case and got cold feet with my expensive PD Air order after reading some mixed reviews on their service.
The company is Riot Outfitters and the protective case is leather. I have opened it and so far it looks fantastic. Magnets for closing it and it can be configured into 2 stand up modes using a flap that collapses with a magnet at the back. The ports are all exposed with the one exception being the docking port. I will take pictures tonight and offer some more thoughts.
UPDATE: Sorry pictures and full review delayed as I had a family function to attend..tonight for sure...
As promised here are some pics and an additional comment based on a few days of use. My only other complaint (other than dock port being covered) is that the unit slips a bit when it is tilted in landscape mode (non volume side) as the magnetic slip over latch doesn't hold the unit completely in.
Here are some pics and ask away if you have any questions. The only other thing I forgot to mention was the price. The unit was $49.99 at the Canadian Best Buy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like a promising alternative to the PDAir cases. However, it does seem very loose. Does it seem pretty secure to you?
Chlballi
The slight slippage I was referring to only allows it to slip so far as the unit itself fits in snug at the center width. Undoing that clasp and purposely holding it up the unit does not slide out. However, with that said it is a bit loose in that one orientation and being leather it may get a bit looser but all in all I would rather have it a bit easier to get in and out versus what I have read about the Acer one which seems to hold it too tight. Also for $10 more you get something that is leather and doesn't smell like gasoline
I also don't think it would require much effort to rig it to make it fit completely snug and have some low cost ideas already but at this point I don't require it.
I also picked up this case and I've only found one issue with it. When using the tablet in landscape mode with the side that opens facing down, I've noticed that the tablet sides down somewhat and the case edge covers the ambient light sensor causing the screen to dim. I've even noticed this in portrait mode on occasion.
They should have put a notch in the side for the light sensor like they did for the front camera. Five minutes with a sharp exacto knife fixes the problem
Cant find this case
on Riots website?!
UPDATE: Added pics of Packaging including SKU/Part number above for those interested.
there is a GIANT problem with this case and with most other cases out there..
(I have one..)
It was designed to fit the device... upside down... chances are a person will 90% of the time use it in the "not to high" angle to kind of lay them with a good viewing angle so they can type while on their lap or on a desk..etc.
The problem is the whole device sits upside down when you put the device into this sleeve.
This wouldn't be an issue if the rotation worked as its supposed to but its currently extremely buggy in HC, games will always display in the original ladnscape mode so using this case, they'll appear upside down.
Also... there is that horrible bug in honeycomb where all other rotations perform like garbage... so that really annoyed me.
I solved this by cutting the proper holes for the device to fit in rotated by 180 degrees.
secularhuman said:
on Riots website?!
Click to expand...
Click to collapse
I even sent them an email sing if they planned on releasing this in Best Buy in the US. No reply as of yet..
Got a reply from them today and its as follows:
Tom,
We do have that case available for sale.
The cost is $19.99, the only problem is we can not process a credit card at this time for this item because it is not on our site.
I can process an order 2 ways, one you can order something for equal price from our website and when the order comes through I will see your name and send the Acer Tablet. Or the other way is to send us a check.
Let me know if you are interested in either of the above options and I will make sure that you get your order.
If you would like to call me to discuss details let me know and I will give you my direct line phone number.
Thank you
Tanya
Riot Outfitters Customer Service
Sounds like an awful lot of crap to deal with just to purchase an accessory for my tablet. Especially one that will require modification to hold the tablet right side up and fit snugly...
Sounds like an awful lot of crap to deal with just to purchase an accessory for my tablet. Especially one that will require modification to hold the tablet right side up and fit snugly...
Click to expand...
Click to collapse
True, but for $20 you are getting something that doesn't smell like gasoline
I just keep brightness on manual so the lack of the brightness sensor being obscured for me personally has been a non factor...so I have done no cutting and the only thing I did was add a clasp which cost me $2 so the unit is completely snug. I can post some pictures but agreed it is post purchase. I am confident the PD Air is a better case...much better but also much more expensive.
i wasnt offered a purchase deal from Riot/Tanya in the email she replied to me. she just said they were looking at getting it sold in US Retail stores but nothing right now.
minotauri said:
i wasnt offered a purchase deal from Riot/Tanya in the email she replied to me. she just said they were looking at getting it sold in US Retail stores but nothing right now.
Click to expand...
Click to collapse
Hell, it'd be nice to just be able to order one from their website, can't even do that. That may be why she offered me a shot at it. My problem is the part about ordering something else, paying for it and then hoping the monkeys in the packaging/shipping department sent the right item. Don't know that I really wish to deal with the headache if they screw it up.
Hi everyone,
I was just about to buy a leather folio on ebay for my tablet when I decided to do a quick search for a TPU case just to be safe. And ONE hit came up. Looks like the seller 'tpdgear' is selling a tpu case on their page. The seller states it has limited quanities and is seeing how the product sells before having more made. I bought one myself and will give my opinion of it early next week when I receive it. I have been looking for one of these cases forever and now its finally here!! From the pictures, it looks like they have 'tpdgear' emblazoned on the back of the case (dunno if thats a turn-off for a lot of people).
Sorry, but the forum doesn't allow me to post outside links on the forum since I'm a new user. You can do a search for 'Acer A500 tpu' and it will give you a hit for user/seller 'tpdgear'
For those who don't know what TPU is, its an abbreviation for thermoplastic polyurethanes, the material the case is made of. Its more rigid in structure than your typical silicone, but softer and more flexible than the plastic hard cases. I have owned multiple cases made of these for my cell phones and i LOOOVE them. Just wanted to let you guys know for those that looking for them. I dread having to get one those bulky leather folios and have been using a netbook sleeve/case myself.
this one?
http://cgi.ebay.com/Clear-Smoke-TPU...?pt=US_Tablet_Accessories&hash=item3cb9bbee06
Yes, thanks godashram for posting it!!
You beat me to it. Just discovered it today, was going to post but saw this thread. Bought mine a few mins ago. I will post when i get it. Anyone else order one?
sure now they get one out there. literally just got my skinit skin in and put it on yesterday. Will tell you though, everyone thinks this skinit textured carbon fiber is real. It is the best fake carbon fiber i have seen yet
slowestcivic said:
sure now they get one out there. literally just got my skinit skin in and put it on yesterday. Will tell you though, everyone thinks this skinit textured carbon fiber is real. It is the best fake carbon fiber i have seen yet
Click to expand...
Click to collapse
LOL..... I was going to do the same thing but will try the TPU cover first. Does the skin come with all that cut outs for the speakers a such? I assume so.
Hey, I've been looking for one of these for a while...good find! If possible, post some pics and let us know how well it fits and all. I'd like to know if it works before I pull the trigger and buy one. Thanks!
I got it! Came in today! Here are some pics:
The side where i am pulling back the case is softer than i like but it is protecting it very well. The cutt out for the lock right below is the one that isnt cut out very well but does not cover it. I will get more pics up when i get back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks great! I've wanted one since I got my tablet. I just ordered mine today so I'll comment on the quality when I get it.
Yeah I was gonna wait until I got your review before ordering, but instant gratification won out. Mine is on the way. Glad it does truly look decent, so I didn't just waste 18 bucks. Thanks for the pics!
Just got mine about an hour ago. Other than the giant "TPDGEAR" across the back, I love it. I've been looking for something like this since the A500 came out.
Just got mine today! It fits well, and is a lot firmer than the usual silicone covers. My only complaint is the softness of the sides, top and bottom edges. I solved this with a few strategically placed bits of doubled sided scotch tape along the edges. Now when I pick it up by the edge, it doesn't pull away from the tablet. Overall a good little cover though.
just received mine yesterday. case fits like a glove and eliminates a lot of bulk compared to other sleeves, portfolios and cases. cut-outs for ports & speakers line up true and allow cables to be inserted with causing it to be loose. material is sturdy (its tpu) and came in a smoky color. like karlkarloff said, some people may find the edges to be a little too soft, but i personally didn't have a problem. there is 'TPDGear' etched in the back in big letters so that would be my only complaint. big thanks to razen_spec for posting pics!
So I've had mine for a week now and I really like it... I like the textured feel and the TPU material is very sturdy and has a tight fit. The only small issue I have is the logo. I would have rather had a cutout for the metallic Acer insignia.
I just bought one today. I can't wait to be rid of the HORRIBLE Acer case.
There's another one on ebay now. Same price, no annoying logo in the back!
Just bought it, I'll report back in 5-10 business days.
PS: just got my Acer yesterday (staples deal) and loving it so far.
i love this new table. had ipad1 and i found it best used for coffee toaster.
love the widgets, and the google browser.
ordered! Thanks
rstuckmaier said:
There's another one on ebay now. Same price, no annoying logo in the back!
Just bought it, I'll report back in 5-10 business days.
PS: just got my Acer yesterday (staples deal) and loving it so far.
Click to expand...
Click to collapse
Damn, I like my TPD Gear case, but the one you found looks a little nicer. Looks like it wraps around the front of the screen a bit more so the siders won't flex out like they did(two sided tape took care of that) on my TPD one. And its black with no logo, I might have to get it and see if I can sell my other one.
How is the screen covered for travel?
Thanks for posting this case. I just the Iconia for the hubs' b-day this week, and haven't decided on a case yet. We just got a zipper neoprene case%for it (cannot beat five bucks!)