I have windows 6.1 that I install from here, it think is ASerg 4.17 Touch it or something and I cannot send or receive MMS..is there a fix for this or will I have to go back and install the t-mobile stock Rom again?
I have the Open Touch 3.0 from Ttran and have this same issue and never got a real clear answer.
did you guys run connection setup??
go to settings, then connections ... and run the network wizard.
Related
Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
you can search the forums for how to flash roms... there are so many different ways to do it.
If you have ActiveSync in XP or Mobile Device Center in VISTA.. and you are able to successfully sync your phone with your machine ... all the instructions you need are included with the Rom download. Try reading the directions.
I will help you, what kind of herald do you have, CID lock yes or no? Which provider?
secondxg said:
Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
Click to expand...
Click to collapse
When you hard reset your PDA, and then connect it to your PC with activesync it will ask you to setup a new activesync session. Cancel that process and it'll be connected to activesync in guest mode. If you go to the help options in your PC for activesync and search on Guest it'll go into slightly more detail.
thanks a lot
oh yea... i got the original tmobile wing with the original rom. 4.10.531.3 wwe im tryin to install one of those tmobile original rom with touch flo. ima newbie so just tryin the simple til i get better at all this. dont wanna brick my phone
is this a reversible procedure? installing touch it?
I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
Hi all experts.
I have a MMS-send/receive problem on my T5358+ phone.
I have installed Arcsoft 5.2.2.22 and put in all the required settings for MMS-server ect. It's running WM6.5, .NET ver. 3.7.
When I try to send a MMS, the phone connects to the GPRS-network through the created MMS-connection (Celluar GPRS and MMS-APN name) and then immidiatly disconnects.
The phone can use the normal GPRS connection (Celluar GPRS and internet-APN name) for surfing the net, updating weather ect. It works OK.
The problem only accurs on the MMS-connection.
I know the settings for the MMS-connection is OK.
I have the same settings on another WM6.1 phone with arcsoft 4.8, and it's working OK.
If I set MMS-retries to 3, the first try disconnects. The next try does not disconnect, but no data is sent. the last try dis-connects.
Can you help me in the right direction to find the error ??
THX in advance.
Regards
Sthh
Hi all
Found the solution.
I had run into the WAP-bug.
It's all explained here:
http://forum.xda-developers.com/showpost.php?p=3815864&postcount=218
I haven't searched enough in the forum before I posted. Sorry.
Stha
Hi!
I have problem with cellular connection.
I've tried few roms:
http://forum.xda-developers.com/showthread.php?t=1356833
http://forum.xda-developers.com/showthread.php?t=953078
I can't connect to gsm network.
Connection Setup says that my carrier doesn't exist in database (Play, Poland).
I did input my apn settings manually, but it didn't work eather.
On Android and WM6.5 everything is working fine. Few months ago I've had BackToTheFuture 7720 rom - without problems as well.
I'm running out of options...
Check if there is an update to Connection Setup, otherwise you could try flashing an original WM 6.5 Rom and see if the problem persists.
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
gregory90 said:
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
Click to expand...
Click to collapse
There is a new connections database cab for connection setup at yuki/xbmod tweaks thread, but Play is not in the database. Must be a niche carrier. Find out if Play is a reseller of a larger carrier.
Actually there is Play in that database. It seems like Connection Setup can't detect proper network (I'm using Turbosim to remove simlock - could this be causing problem?).
Is there a way to tell Connection Setup what settings should it use? Or set this manually?