Database Users

Magician and Blue Angel GPRS “Cannot Connect” Fix

After watching for months the issues that many have suffered over this problem, I finally found a solution that will fix all the woes.
A few months ago I was one of the many here that upgraded to 1.11 ROM, had the problem. It drove me crazy to the point that I went back to the 1.06 ROM that was rock solid. Well the other day I did a hard reset to have a clean slate. While looking at the Extended ROM I saw the file DefaultV_1.12 in the EXT Rom (Compared 1.11 ROM on FTP to my device). This was the same file that a XDA developer member had modified to somewhat solve the GPRS problem a few months ago.
At this point I had a hypothesis, so I pulled the same file from the older 1.06 ROM which was rock solid and did not have the “Cannot Connect” problem. In this EXT ROM it is named Default_Version_WWE_106150.sa.CAB.
Installed it first on my Blue Angel as a guinea pig, then for the next three hours I would sit there and disconnect and reconnect. I did it manually by holding the red button to disconnect, then I would reconnect to another webpage, then would have a call come in while in the middle of the GPRS session which would suspend it. After done with the phone call I would reconnect manually by clicking connect as well as by just hitting a link on the webpage.
The Results: No “Cannot Connect” problem.
So off I went to my Magician:
Upgraded to 1.11(I have 850 JAM)
Installed Default_Version_WWE_106150.sa.CAB
Put the phone through its paces, I have been disconnecting and reconnecting without a single problem. I receive phone calls that suspend the GPRS session and I am able to reconnect without a problem. Activesync is able to make OTA connections without a hitch.
During my trials I used the same programs:
Which included:
Photo Contacts(newest version)
Activesync
WEBIS Mail 2
xVbar
PocketZenPhone
Regking 2003
As the only variable throughout the trials was Default_Version_WWE_106150.sa.CAB
This is the solution folks.
At least until someone says it does not work.
Installation Steps:
1. Download CAB that I have attached.
2. Copy over to device
3. Install
4. Soft Reset.

1st of all let me say this is a great site for the HTC devices, I found it years ago when i had the first XDA (Wallaby i think) and now i own a O2 Mini.
I have just installed your patch and i'll let you know how it goes.

I wonder if this patch does the same as the "downgrading" of the caller id as detailed in this thread: http://forum.xda-developers.com/viewtopic.php?t=20428
The downgrade has been succesful for blue angel users too.

randomshots said:
Installation Steps:
1. Download CAB that I have attached.
2. Copy over to device
3. Install
4. Soft Reset.
Click to expand...
Click to collapse
Many thanks for posting this information.
For a relative newbie like me who has never manually fiddled with ROM files, can you please explain what I actually have to do to "install" the CAB file, i.e. in which directory on the device do I put it, and how do I run it?
- Peter

Once copied over to the device just place it where you can find it using the file explorer. Once located using the file explore simply click on it and it will install on its own. Do a soft reset and enjoy.
Crisscross: The Photo Contact solution that people have found only alleviates the problem a little, not entirely.
In my trials it has solved my problems completly. I wish for other members who try it out to report back as well to see whether all my trials were just a fluke, or our solution.

don't work for me
don't work for me. same problem as before, can't connect due unknown reason.
thanks anyway.

Orcas what is your ROM?

randomshots said:
Crisscross: The Photo Contact solution that people have found only alleviates the problem a little, not entirely.
In my trials it has solved my problems completly. I wish for other members who try it out to report back as well to see whether all my trials were just a fluke, or our solution.
Click to expand...
Click to collapse
The downgrade of caller-id to an earlier version has also solved the problem totally for me and several other people, both blue-angel and magician users. Thats why I was curious just what your patch did. Seems that it is something similar, you are maybe downgrading more of the rom?
Did you try downgrading of the caller-id first? Not just photo contacts but downgrade to the specified earlier build of caller-id?

randomshots said:
Once copied over to the device just place it where you can find it using the file explorer. Once located using the file explore simply click on it and it will install on its own. Do a soft reset and enjoy.
Click to expand...
Click to collapse
Hi there,
Just thought I'd report that I've just installed it. My ExtROM now reports as 1.06.150 WWE.
And... so far, so good!!! I've connected/disconnected to GPRS multiple times, interrupted GPRS with a phone call and then reconnected, have sent files to my device via BT while GPRS is on, and still no problem. It's looking very good!!!
And I'd swear it connects faster than it did previously.
Anyway, I'll keep hammering at it over the weekend and report back on Monday.
Thanks again randomshots!

Well, I'm back already, because I still have the problem. DARN IT!!!!!! :x
The thing that made it happen was that I made a phone call while GPRS was on. When I ended the call and tried to reconnect to GPRS, I got the blasted error. So it seems that receiving a phone call does not cause the error to happen, but making a call does. At least for me.
Oh well, it was worth a try. Back to the drawing board.

Same problem in Hong Kong
I upgraded to ROM v1.11 a few days ago and since then I have the GPRS connection error after 1 or 2 connections. Soft reset will solve the problem. This problem was not encountered at all before the ROM upgrade. It must be the new ROM that mess things up!

As this "default cab" from an old rom seems to solve the problem and also an older version of caller-id solves it there is probably something wrong in the communication between caller-id and some of the customisations from this cab on newer roms. Btw the problem is also in 1.12 roms.
Nice too see that we have two possible solutions here, I will stick to the downgrade of caller-id as it has solved the problem totally for me but it would be interesting to know what the real cause is...

Hi again. Just to answer the previous question to my post: my rom version is 1.12.00 WWE, radio 1.12.00, extrom now says 1.06.150. i think the only thing this cab changes is this rom number, nothing else
orcas

orcas,
I believe you are absolutely right. When the extended rom has finished installing the programs, it runs this .cab file to 'brand' the Magician with the build number. Nothing more or nothing less. But faith can move mountains, as we all know...

I guess some of you know that there is another (older) thread about GPRS problems. If you do not, there is a link below.
Anyway, I finally tried the most recent suggested fix in that thread (downgrading the device's CallerID program to an earlier version) and like a number of others I can happily report that so far, it has fixed my GPRS cannot connect problem. Looking good.
Here is the thread:
http://forum.xda-developers.com/viewtopic.php?t=20428
- Peter

Just thought I'd share that the second fix I tried (downgrading CallerID) has continued to work for me. I have no more problems with GPRS. All is well with my Magician. At last.

Urgent Problem, Blue Angel Freezes

I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP

read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri

baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin

I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...

Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?

joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...

it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.

well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all

xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz

Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5

thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz

KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....

OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )

BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.

Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas

OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$

I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.

WM6.5 - Manila 2.5 keeps rebooting

Hi there,
Actually i met this problem for several times since i tried wm6.5 roms with Manila 2.5.
I flashed dutty's WM6.5 Leo R6 last week, and it seems to be stable and speedy until yesterday...
Manila 2.5 started to reboot again and again. i can see from task monitor that the CPU usage for Manila.exe is increasing, arrive at over 80%, and then the session disappeared (killed by system? or suicide?), and then recreated, again and again.
Sometimes there would be a sentence on the top 'Tap here to launch HTC Sense'.
I know a hardrest or reflash would definitely solve the problem, but it will be there again after several days' use - according to my previous experience with Manila 2.5. Does anyone meet the same symptom? I cannot even spot the possible root cause/ or trigger for it..
Thx.

here's a short video i took this morning,,, could be easier to help describe the symptom.
http://www.youtube.com/watch?v=EIgseoIc0r4

does your phone hard SPL.
if you do that, try to flash ship rom (6.1)

longnguyen30 said:
does your phone hard SPL.
if you do that, try to flash ship rom (6.1)
Click to expand...
Click to collapse
yes, i did that, i used dutty's wm6.1 rom v3.x & v4.x very well before. just wonder why having troubles with wm6.5 roms (with manila 2.5)
I heard that flash a latest shiped rom and then back to this could solve the issue, that's my final solution

fredic said:
I heard that flash a latest shiped rom and then back to this could solve the issue, that's my final solution
Click to expand...
Click to collapse
That seemed to do it for me as well. However, I did all these three to resolve my problems:
Flashed to stock ROM -> Leo R6
Stopped using CorePlayer (initiated all problems)
Stopped using contacts among favourites
Don't know which one(s) actually solved my problems.

It happened to me when I tried to add new locations to the weather tab with the Weather database editor and I corrupted the database.
Simply delete the database to get the ROM on and it gets solved.

Ogredani said:
That seemed to do it for me as well. However, I did all these three to resolve my problems:
Flashed to stock ROM -> Leo R6
Stopped using CorePlayer (initiated all problems)
Stopped using contacts among favourites
Don't know which one(s) actually solved my problems.
Click to expand...
Click to collapse
I didnt use CorePlayer (have it in storeage card, but didnt run it)
didnt use favorites..
what's most weird is......it was back to normal yesterday automatically- after 2 days' mad. i didnt do anything to it.

beemerTPPC said:
It happened to me when I tried to add new locations to the weather tab with the Weather database editor and I corrupted the database.
Simply delete the database to get the ROM on and it gets solved.
Click to expand...
Click to collapse
could you please tell me how to delete the database and restore it? thx.

My HD2 is very unstable with different ROMS. Help please

Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.

I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).

What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse

tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb

[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?

willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.

tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.

tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets

Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...

Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me

willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.

I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before

Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...

mtty may help u out

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!

Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.

use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.

Phone problems!!!

Hi everybody,
I have got the LEO last week. I had several problems I could solve, but one big I could not solve yet.
It belongs to the Phone. After making a call, I am not able to make a second one. The application freezes, when I close it, I am not able to open the Phone again. Making a call from the history list is also sometimes something i can not do.
Can please somebody help me? Without the posibility to make easy and quickly calls the LEO is for me useless.
Thank You very much in advance!!!

i have the leo 4 7-8 months.never had problems.tried soft reset?if that wont help i believe that you must go 4 hard reset
maybe some program you put makes that.

If your LEO is giving so much problems within a week, you probably have a mondaymorning model.
Try to exchange it at the shop as it is not funtioning properly. (In EU this is consumer right)
If not possible,
What is it you have done to your phone allready?
You mention having problems and solved them, can you remember what you have done?
Has your phone ever funtioned without problems?
Try to do a complete factory reset or hard reset (look here)
Then format SD (first save data somewhere)
After reset/format does your phone function correctly?
Furthermore:
If you install apps/enhancements/skins, install all apps you need for your phone running on your device.
If you remove SD, your device should be able to startup without any problems, only applications you use besides the normal startup should reside on sd Card.
So for example:
Cookies home tab (becomes part of home screen)=> on device
Igo8 Navigator (Started manually after boot) => on sd card
Task manager (runs allways on background) => device
Games like experiment 13 => on sd card
[....]

if its brand new, get a new one, otherwise
backup
hard reset
if fixed, ok!
if not fixed,
try find an updated stock rom (if you want to stay stock) or get HSPL and flash a cooked rom.
If problem fixed, ok!
if not fixed, hardware problem.

Thank You for the replies. In the morning I tought the problem is fixed, but is not. Can be Cookies home tab a problem?

Stano 74 said:
Thank You for the replies. In the morning I tought the problem is fixed, but is not. Can be Cookies home tab a problem?
Click to expand...
Click to collapse
well it could be cookies but thousands of people use cookies so its unlikely.do you have loads of stuff installed?
also, are you restoring registry settings when you flash? because you shouldn't do that when you go to a new ROM. registry settings backup is only really for restoring to the same rom after hard reseting.

I tried to found an official ROM update for my device. I found one, but the only change is the launching date. On my device is one from 11.1.2010 and I have found one from 4.6.2010. Does it make sense to update?