Wing for NOOBS like me.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
For updates please check the site I have created for the wing.
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please post it below, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
Part 1: useful thread Post.
Part 2: Random tweaks from HOFO.
Part 3: Rom’s Touch it Wing 2.3
3a Touch-IT for The Wing Full and Lite Ed.
Part 4: Random Info
Part 5: T-Mo Wing RUU for USA
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu Activesync Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
Storage Card Settings:
Mail Attachments
1. Go to Text/Multimedia --> Menu --> Tools --> Options --> Storage
2. Then check the box!
IE Storage
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders
Key: Cache (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Temporary Internet Files
Key: Cookies (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Cookies
Key: History (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\History
Note: Please see the “camera settings” to store pictures and video to the storage card.
Video from Portrait to Landscape:
Registry: HKLM\System\GDI\
Add key "Rotation"
Add Dword "LandscapeMode"=0
Move / Remove Startup Files:
1. make directory "\Windows\StartUpDisabled"
2. If you don't use MyFav5 Plan then copy "\Windows\StartUp\My5MsgCenter.lnk" to "\Windows\StartUpDisabled\My5MsgCenter.lnk"
3. If you don't use Voice Commands often (you can still manually start app) then copy "\Windows\StartUp\Voice Command.lnk" to "\Windows\StartUpDisabled\Voice Command.lnk"
Remove Services:
4. Go to "HKEY_LOCAL_MACHINE\Services"
5. If you don't use MyFav5 Plan (SMSCSend links to my5client.dll, I don't have My Fav plan, so I don't need this service)
a) save SMSCSend reg export somewhere for backup
b) delete "HKEY_LOCAL_MACHINE\Services\SMSCSend" from registry
6. Go to "HKEY_LOCAL_MACHINE\Services"
7. If you don't use Windows Live
a) save Windows Live reg export somewhere for backup
. b) delete "HKEY_LOCAL_MACHINE\Services\Windows Live" from registry
Other Services:
Other Services
"HKEY_LOCAL_MACHINE\Services\BTHIDSVC"
loads the Bluetooth Human Interface Device drivers and service
"HKEY_LOCAL_MACHINE\Services\BTAGSVC"
loads the Bluetooth Audio Gateway drivers and service
"HKEY_LOCAL_MACHINE\Services\BthAsPlugin"
loads Active Sync over BlueTooth service
"HKEY_LOCAL_MACHINE\Services\Trusted"
loads WSP Push, Push Router, SIM tool kit, SIM Init
"HKEY_LOCAL_MACHINE\Services\OBEX"
object exchange - protocol for data exchange between devices or syncing
"HKEY_LOCAL_MACHINE\Services\NOTIFY"
pop up notifications for events
"HKEY_LOCAL_MACHINE\Services\credsvc"
Credentials Manager
"HKEY_LOCAL_MACHINE\Services\CERTENROLL"
performs enrollment and renewal of certificates
"HKEY_LOCAL_MACHINE\Services\WirelessService"
Wireless Monitor Service
Increase voiceVolume:
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 10
Increase Voice Command Volume:
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: AttenuationCategory
Default: 3
New Value: 1
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: InitVol
Default: 5
New Value: 20
Better sound over A2DP
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: MaxSupportedBitPool
Default: 30
New Value: 58
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: BitPool
Default: 30
New Value: 58
Note: If not good enough, then delete: "MaxSupportedBitPool"=XXX &
"BitPool"=XXX.
Unlocks & Unhide the Extended Rom in Explorer:
Registry: HKLM\System\StorageManager\AutoLoad\TRUEFFS_DOC1
Key: bootphase
Default: 1
New Value: 2
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: mounthidden
Default: 1
New Value: 0
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: folder
Default: ?
New Value: Extended_ROM
GMail Settings:
You can access your Gmail messages from the Wing in three ways:
Set up Gmail as a POP3 account
Automatically forward Gmail
Access Gmail from the Internet
Set up Gmail as a POP3 Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page.
3. Select the Forwarding and POP tab in the orange Mail Settings box.
4. Under POP Download, choose to Enable POP for all mail or Enable POP only for mail that arrives from now on.
5. Specify whether you want Gmail to keep a copy of messages in the Inbox when you access messages through POP.
6. Select Save Changes.
I. Auto-configure Gmail from your Pocket PC phone
1. Press Start --> Messaging.
2. Select New Email Account.
3. Enter your e-mail address and make sure the box is checked for getting the settings automatically
4. In the Auto configuration screen, wait until the Status changes from Connecting to Completed and then select Next.
5. Enter your name, user name, and password (DO NOT REMOVE the recent: from in front of the username that it automatically provides) and select Next.
6. Ensure Account type is set to POP3 and select Next.
7. Make sure that Incoming Mail is set to pop.gmail.com:995
8. Make sure that Outgoing Mail is set to smtp.gmail.com:465 and select Finish.
9. Select Yes to confirm that you would like to download mail for this new account now.
II. Automatically Forward Gmail to Another Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page
3. Select Forwarding and POP in the orange Mail Settings box.
4. Select Forward a copy of incoming mail and enter the e-mail address to which you'd like your e-mail forwarded.
Now your Gmail will automatically be forwarded to this account.
III. Access Gmail from the Internet
If you don't subscribe to an unlimited data plan or need only occasional access to your Gmail account you may prefer to access your Gmail from your Pocket PC phone using Internet Explorer. To access your account through Internet Explorer, go to http://m.gmail.com.
Part 3 Touch it 2.3 for th wing
The Following is from itje
Original thread http://forum.xda-developers.com/showthread.php?t=340403
Touch it: a rebuilt rom for the wing
Part 3a Touch it Full and Lite
The Following is from itje
Original http://forum.xda-developers.com/showthread.php?t=332789&highlight=wing
Part 4 : Random Stuff
Wing as a Webcam
Found at XDA
http://forum.xda-developers.com/showthread.php?t=348187&highlight=WING+AS+A+WEBCAM
Part 5: T-Mo Wing RUU for USA!!
From xavier6303
Found http://forum.xda-developers.com/showthread.php?t=321717
This will reset your phone, basically reinstall windows and all the phone, heard it works as a decent unbricker,
How to enter boot mode
Restart the phone and hold the voice and camera button
i tryna send something to someone but i cant because the file is to big how do i change the limit
Change MMS Limit
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Click to expand...
Click to collapse
HOw do I get to the HKLM I can't figure it out....
musada said:
HOw do I get to the HKLM I can't figure it out....
Click to expand...
Click to collapse
You have to use a registry edit program.
http://www.freewarepocketpc.net/ppc-download-total-commander-v2-5.html
this is a good post, thanks mane
I've got a problem with MMS. the pictures are very small. In my old Diamond2 I had this problem too, but it was solved changing some registry editors (User-Agent in HKLM/Software/Arcsoft/Arcsoft MMS UA/Config/mm1/WspHeader).
But with new HTC message client (manila 2.5), this registry editors are missing... and I don't know how to solve this. Any idea? thanks.
All messages - Menu - Settings - Options - bottom is Photo resolution... Set to XGA...
it's original resolution. but the problem is not the picture I send. It's the picture I recieve...
Yes i had this problem with my polaris when i flashed the ROM. Basically your network is limiting the size of the pictures based on your user agent.
If you search my posts you should find a more detailed explanation in the polaris forums.
What you need to do is find a phone that your network sells/supports and change the User Agent profile for mms. Since the mms software is not arcsoft the registry entries will not be there, you'll need to find the registry entries for the htc messaging application.
I found the registry editor !!!
HKLM/Software/Jataayu/MMS/SP/UserAgent
now I got normal pictures size MMS in my Leo !!!!
what I've done:
HKLM/Software/Jataayu/MMS/SP/UAProfile
changed to: http://www.htcmms.com.tw/claro/diamond-1.0.xml
HKLM/Software/Jataayu/MMS/SP/UserAgent
changed to: NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
my operator: Claro (Brazil)
What are the correct registry settings for TMO US?
I had same problem with HTC Touch Pro
Solution was
There was one guy who had this problem over at esato and he fixed it. This is hidden in a rather long genieric thread so i'll just copy his post here...
"Basically, it has something to do with the phone not being set up, or directing to the correct 'profile' with the network operator. For example, my settings were directing to the Taiwan HTC website for some reason. Because O2 didn't have these settings, it was defaulting the MMS settings to how they were when MMS was first introduced.
The solution is basically using a program like PHM Registry Editor to change the profile, so it directs to the correct details. However, as there aren't any specific Xperia ones yet, you can have it use those of another phone. In my case, I have used the N95 settings, as these are ones set up on O2.
So, in the reg editor you need to go to HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
There will be 6 strings in this part of the registry. You just need to edit the 'User-Agent' profile to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
And the 'Profile' string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
You don't need to reboot. And that should get the pics coming through at the correct size.
Hope this helps if anyone is having the same problem."
This thread
http://www.esato.com/board/viewtopic...743&start=6480
page 433 - his/her nickname is s32bauer...
But now registry is not the same
Need help
Can someone help?, my mms messages are not being received even after making the server changes and installing the cabs. I also need a registry editor that can import reg keys that can possibly fix the mms issue.