Hello,
is there any programme that lets you adjust the backlight with the volume keys (e.g. the volume keys on the left side of the Touch)? It would be fine if so, because after using the patched HTC Home - Plugin I can not change the backlight by tapping onto the backlight button in the HTC Home - Application-Starter
So far...
haven't seen one using the buttons, but there is a today plugin that is pretty small and useful. it's called mvbk light or somethign like that. It puts a little slider on your today screen. It can be skinned also...
here is the link:
http://forum.xda-developers.com/showthread.php?t=379270
need this as well
i'm looking for this kind of app as well. due to low battery performance of our o2 atom, we have to keep the backlight at minimal seeting. the problem start if we're outdoor, the screen is hardly visible because backlight is set to the lowest. so the app mentioned by joshrys is not the solution because of the outdoor situation mentioned. please advice...
Related
While playing with my HERMES I noticed the following:
First:
The screen is not as bright as on the WIZARD!
Second:
When turning on the camera you shortly can see that the backlight gets increased while opening the CAMERA application. Now, that tells me that there could be a way to increase the background backlight permanently over its default maximum.
Has anyone an idea? I tried already to raise the registry values for backlight without success.
VJ's
There is a program by VJ called super bright I believe it what you are looking for, if so post a little love for VJ's hard work here is the link
http://www.vijay555.com/vj/releases/vjlumosiii/vjlumosiii.exe
Well, it makes the screen nice and bright - that's for sure!
The drawback's on this neat little application: You can't shut it down other than restarting the PDA, you can't adjust brightness and you can't use the CAMERA as long as the application runs.
I just wonder if the brightness could be increased via Registry Hack - that would be great!
how very odd! i've noticed that comparing my Vario I (Wizard) with my Vario II (Hermes) the Hermes has a considerably better and brighter screen! the colours are a lot more 'fuller'!
i havent tried the 'VJ' app, but will do when i get home,
why would you want it so bright anyway?!
Well, the brightness helps while watching a movie on the go!
Also if you do some work on the road or navigation in the car it comes in handy. I just wish the application mentioned above would not have so many side effects ...
Junner2003 said:
Well, it makes the screen nice and bright - that's for sure!
The drawback's on this neat little application: You can't shut it down other than restarting the PDA, you can't adjust brightness!
Click to expand...
Click to collapse
I just 'click or ok' Super Bright the same way to turn it on or off (no pda restarts needed).
Run the program again to shut it off. I mapped it to one of the hardware buttons.
Thank you vijay555!
it is possible ?
I'm using the KAISER, when in a building i set the brightness to low becuase it has a very bright screen and it's just a waste of battery
But when i go outside i can't see a thing, need to set it to high again
And then i just forget to set it to low again
is it possible to make it be automatic ?
(bright outside - high brightness, dark outside - low brightness)
Thanks !
p.s.
does the KAISER have a light sensor like the Universal's keyboard light sensor ?
if so, is it possible to use that ?
ah man i hear you. when my sister got her blackberry pearl, and i saw it automatically change brightness, i was jealous. aha. unfortunately, the sensor is hardware thing.
i'm not sure about the kaiser but i know the hermes has a keyboard light sensor, but it's on the keyboard, and only says whether to turn on the keyboard backlight or not. not too useful, i'd think.
Hermes and Kaiser have front cameras...
but camera is a no-no for battery
Even once a minute, or on power-on?
Well, maybe yes.
I nice Solution would be a Button you press it, and the Brightness gets configurated automaticly: perfect for battery because you do this only on need!
And there could be a standart brightness reseted after having standby on
I dont know how to use the Camera in VB.Net someone knows?
I was thinking more in the direction of the front camera and the timer ....but bettery above all .... if it is possible it would be awsome !
the buton pressing idea is (forgive me) pointless ... if i wanted to press a button i might as well press the on screen button i already have ! (spb mobile shell)
thanks for the idea though !
it's great to see so many people taking interest, hope it will stick !
SPB software is my solution. You can map your jog dialer for brightness. I use that for volume, so I use touch screen to slide my brightness.
http://www.spbsoftwarehouse.com/products/pocketplus/?en
look at the screenshot or demo. Map the brightness as botton4 is a option because brightness is a program link for you to set what ever button as you wish.
blah, i have an at&t 8525, so i forgot about the front facing camera. my current solution is to set the backlight to reasonable indoor setting, and i have VJLumos mapped to my Button5 press&hold. so whenever i go outside, I run VJLumos, and when I get back inside, I run VJLumos again (which turns it off) and it automatically goes back to the previous backlight setting.
Hello
I have a problem with my 8525 hardware keyboard.
I have the backlight auto sensor enabled and the light doesnt turn on when i slide my phone open.
But... when its on the charger it works
Whats the problem??
Im using joshes m2d light 3g rom
Thanks in advance!
Does it turn on after you start typing or does it stay dark?
it does turn on after i start typing,
but i would like to get the sensor to start working
so it will turn on when i slide the phone open
Backlight issue
I've discovered from just using my 8525 that the backlight to the keyboard goes on when I first press a key on the keyboard but only if the light in the room is very low. Sometimes it seems like the light level in the room is low enough but the backlight still doesn't go on. Too bad there isn't a low-light level adjustment for the backlight feature.
Just so folk know - it is possible to set it up so when you open the keyboard it lights up regardless of the light level and key presses. Right now I can't remember how!! but I set mine up that way ages ago. Does use more battery power however so it is not necessarily a good thing - but looks pretty.
Mike
It's really annoying when you're in someplace and just after you press the record button and suddenly the screen turns full blast bright! People around starts to turn their heads in your direction... Does your ipaq 612/614 pda's spits unwanted light rays in your face as well?
Do you know how to disable this, perhaps a registry tweak we can do?
Thank you so much
i believe my backlight fix (reg fix) will fix that, check the post in the backlight controller thread
thanx keyx,
you never fail to be helpful
Hi keyx,
I think you should try pressing the record button using the memo program.
I'm sure it still turns bright even after you follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=4527543&postcount=94
Which line specifically prevents the screen to bright?
TIA
sabertooth said:
Hi keyx,
I think you should try pressing the record button using the memo program.
I'm sure it still turns bright even after you follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=4527543&postcount=94
Which line specifically prevents the screen to bright?
TIA
Click to expand...
Click to collapse
i think the note app is designed to force backlight on while recording (like gps app that keep backlight on)...you may want to look for other app that does not do that or try disable backlight globally...
if you use my rom you can use the voice commander button on the side of the unit to turn screen off, it should keep the app going
I've tried other recording programs, also still forces the backlight to turn on to high gear.
I'm currently using backlight controller to turn it off while recording, but sometimes you just need to leave the screen on.
There is a Hardware bug in the iPaq 600 phones.
This bug causes "static" to be heard in all recordings if the screen goes dim.
HP was aware of it and so sent out a "fix" except they did not fix anything all they did was force full screen brighness for the duration of the recording so that you never encounter the bug.
If you disable the screen brightness via a reg key chances are you will here the static in your recordings.
Btw i have not tested keyx's reg fix
little more info here
http://forum.xda-developers.com/showthread.php?t=481905
thanks branded,
I'd rather have it bright than clicking noise
Hi everyone!
I got a new Atrix today and I've noticed something. Its not a huge problem & maybe some others have the same "problem" too.
The Settings and Home soft touch buttons aren't as bright as the back and Search button. Is this just in my case or does others noticed the same? (or maybe im too fussy)
I mean its not a problem everything works perfect but yeah the 2 soft keys left arent as bright as they should i think..
This is how it looks like:
abload.de/img/picture0004fh01.jpg
Mine are all uniform brightness, but they do adjust based on ambient light