Hello !
I have succed to create a wm6.1 rom on my MIO P550, but i have a little problem :
When i want to open the brightness , it open and close immediately !
It will be OK on wm6, but not with wm6.1 !!!
Have yo some idea ? problem with CPL file ??
Any other solution , can I use an other Brightness file ?
Or it is a driver problem ?
Great thanks !!
Nixeus said:
Hello !
I have succed to create a wm6.1 rom on my MIO P550, but i have a little problem :
When i want to open the brightness , it open and close immediately !
It will be OK on wm6, but not with wm6.1 !!!
Have yo some idea ? problem with CPL file ??
Any other solution , can I use an other Brightness file ?
Or it is a driver problem ?
Great thanks !!
Click to expand...
Click to collapse
Could be the following:
1) Driver issue. Make sure you have the correct device drivers!
2) *.mui issue. If the apps don't have the correct localistation, they won't load at all...
3) may be a direct incompatibility... Nothing you can do about that, other than get files from a WM6.1 ROM.
OK, thanks for your help !
I have try to replace the drivers with other.....
But no succes
Nixeus said:
OK, thanks for your help !
I have try to replace the drivers with other.....
But no succes
Click to expand...
Click to collapse
Are the *.cpl files from a WM6 ROM, or a WM6.1 ROM?
from a wm6.1 rom !
Nixeus said:
from a wm6.1 rom !
Click to expand...
Click to collapse
Did you also use the *.mui files from that ROM?
Humm no i just have recopy the folder in OEM\DRIVERS, and the BACKLIGHT.exe
But this backlight ( backlight which coms from MIo A701) open, but no changes when i slide !
are there any *.mui files there?
They may be in OEMLang...
So, i will try tomorow with the MUI files
Nixeus said:
So, i will try tomorow with the MUI files
Click to expand...
Click to collapse
Good luck with that!
YESSSSSS!
I have replace MUI files and backlight.exe from the MIO A701 ROM !!
So i need to search how to re-link the backlight.cpl to the new backlight.exe !
Or convert backlight.exe to backlight.cpl
Great thanks my friend
Using the control panel registry settings, you can link to an EXE...
great thanks to your help !!!!!
[HKEY_LOCAL_MACHINE\ControlPanel\BackLight]
"Redirect"="backlightAP.cpl"
replacing by :
[HKEY_LOCAL_MACHINE\ControlPanel\BackLight]
"Redirect"="backlight.exe"
You think that it will be OK ?
Should be fine.
i will test ! thank !!
Good luck... That should work fine, as it is like that for some other control panel items.
The redirection don't work, i continu to search !
Try entering it as the full path...
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\BackLight]
"Redirect"="\\Windows\\backlight.exe"
Related
Hi,
I'd like to change the default folder icon with Vista icon.
But i'm not sure about the correct procedure.
Someone can help me?
Thank's in advance...
BYE, Bobo
Hi,
anyone ???
BYE, Bobo
Change it on your PC or the PDA?
Have a quick look here, or search under my member id for icon for some tips:
http://forum.xda-developers.com/showthread.php?t=288461&highlight=icon
V
Hi,
obviously for PPC....
I looking for it under your Nick...
Many thank's
BYE, Bobo
vijay555 said:
Change it on your PC or the PDA?
Have a quick look here, or search under my member id for icon for some tips:
http://forum.xda-developers.com/showthread.php?t=288461&highlight=icon
V
Click to expand...
Click to collapse
Hi Mod,
I follow this procedure....
I made a .dll in wich i have been saved all my personal icons....
The tree had icon and icon group resources...
Next i've been written a txt file like this: "28#\windows\bobo.dll,-40" and saved it to icon.lnk. (-40 is the reference into dll icon group).
But i've a problem.... don't work... I'm not be able to see my icon....
I've tried to link at the original officeres.dll and a reference in this .dll but don't work too.
Where i'm wrong?
Thank's for your help....
BYE, Bobo
download from windows directory ..the name is iconress.dll use resource hacker to replace the icon..thats it
Hi noobieku,
In my Windows directory the "iconress.dll" don't exist.
BYE, Bobo
Try downloading this icon dll and using an icon editor like Microangelo librarian:
http://www.vijay555.com/vj/VJIcons.dll
V
Hi Mod,
now it works fine...
Thank's a lot....
BYE, Bobo
is there any way to change the icons of the installed programs? or the icons of adobe flash lite apps?
thanks
Hello,
I'm searching for the \Windows\Poweron.gif / Poweroff.gif nobrand files.
I have a branded IT_TIM Blackstone and I'd like to change those horrible startup/shutdown animations..
Can someone post the 2 files of a no-branded Blackstone?
Thanx in advance,
GianluK
gianluk said:
Hello,
I'm searching for the \Windows\Poweron.gif / Poweroff.gif nobrand files.
I have a branded IT_TIM Blackstone and I'd like to change those horrible startup/shutdown animations..
Can someone post the 2 files of a no-branded Blackstone?
Thanx in advance,
GianluK
Click to expand...
Click to collapse
Hmm ... seems there are no such files on a nonbranded device. Resco explorer configured to show everything, but they're simple not there.
Thanx for the reply.
I've used the Advanced Configuration Tool 3.3 to see the GIF Startup/Shutdown files:
http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
Perhaps in a nobrand device they're in another location..
I searched the whole device, but nothing. Maybe another filename? Or is it to simply delete them which does the trick?
EDIT:
gave that tool a testrun, now its clear:
Startup GIF: animated.gif
Shutdown GIF: default
Great job! Thank you very very much!
GianluK & (i think) all italian users..
Hi all, first sorry my BAD english... I'm Alex from Brazil
I'm old user of Motorola A1200 and in this one I have a software called "security folder" ,, to lock some folders.
I didnt find anything in HTC TOUCH HD similiar.
I need a software whem I can put a password to protect some folders
Some one?
Thx all
alexbrasil said:
Hi all, first sorry my BAD english... I'm Alex from Brazil
I'm old user of Motorola A1200 and in this one I have a software called "security folder" ,, to lock some folders.
I didnt find anything in HTC TOUCH HD similiar.
I need a software whem I can put a password to protect some folders
Some one?
Thx all
Click to expand...
Click to collapse
Resco File Explorer can do this, it is commercial though.
Dave
Thx Dave , I'll try later ,,,
And I wanna know , with this one I can put password in messages folders too.
In A1200 I have a folder , that I created , and all new messages goes to this folder ,,,, and this folder is protected ...... is it possible?
Thx again
alexbrasil said:
Thx Dave , I'll try later ,,,
And I wanna know , with this one I can put password in messages folders too.
In A1200 I have a folder , that I created , and all new messages goes to this folder ,,,, and this folder is protected ...... is it possible?
Thx again
Click to expand...
Click to collapse
I think so, but that's not part of Resco.
I've never tried but a quick googling for SMS Encryption Pocket PC (or Windows Mobile). has some promising results
Ta
Dave
Thx Dave ,,,, but I have one question
I founded the "generic" Resco File Explorer 2008.
I wanna know about the instalation.I transfer the files to Toch HD and install , or install by (in) PC .How instalation works whem we have a program crack?
Thx Dave ,,,, but I have one question
I founded the "generic" Resco File Explorer 2008.
I wanna know about the instalation.I transfer the files to Toch HD and install , or install by (in) PC .How instalation works whem we have a program crack?
Click to expand...
Click to collapse
don't blame other users, cracked programs r illegal so forbidden in this forum
As stated above, this forum does not endorce cracked software.
If you paid for it there wouldn't be any problems
Thanks
Dave
Sorry Dave , I'm new in this forum.
If u preffer , close or delete this topic
Thx again
Hi all!
Can`t find Diamond Phone Canvas with VideoCall function Have tried some from Opal or Iolite - works great, but no videcall
Tried some HTC VideoTelephony packs, but no success too
Can anybody help with this? Is it possible to have video call on nike with HTC Phone Canvas?
I have done numerous tests, the problem is in phcanhtc.dll, replacing it with that of Diamon in iolite packages and add videocall package, it works, but it is not for our resolution...
salvy.c.83 said:
[...] it works, but it is not for our resolution...
Click to expand...
Click to collapse
You need to edit the coordinates inside of that DLL file to get ot working! Take a lok into the Topaz-Dialer-Thread in the Development and Hacking section!
animelover said:
You need to edit the coordinates inside of that DLL file to get ot working! Take a lok into the Topaz-Dialer-Thread in the Development and Hacking section!
Click to expand...
Click to collapse
I'm no able to edit it... somebody can help me?
can someone tell me which program to use to edit it? I have tested reshaker and exeditor but do n't work...
ResHacker dont work with your dll-file. How about to try Topaz PhoneCanvas with dll from here http://forum.xda-developers.com/showthread.php?t=504809 ? ResHacker works with this dll, but I cant find right values for coordinates...
this is back for manila2.5_all_lang.cab its 100% work arabe +all language http://www.4shared.com/file/14144476...?cau2=403tNull
thanks for Garimba
thx , but the link not working :S
the link is
http://www.4shared.com/file/141444764/54a8b786/valkyrie_manila25_all_lang.html?s=1
thanks , this 1 is working , hope also the cab works , i am going to try it , thx in advance
Has anybody tried this yet?
I will try if i know this works on Raphael.
Is it only for changing language with Sun_Y_Rom ?
I tried to install, but no manila.exe, so nothing works )
can anybody describe that what exactly it does , is it only to change the language ???????
Not working
hi all
i already have manila 2.1 on my rom
i installed this cab then soft reset then nothing new
i tried to find any activation for this 2.5 tf3d in today or settings but i couldnt find any thing ,,,
so any one plz help ,
thx in advance
Just tested on Sun_Y , it is working
You just need to edit HKCU/MUI/Curlang to your country code. (credits to [email protected] thanks for info)
For your code, search here
http://msdn.microsoft.com/fr-fr/goglobal/bb895996(en-us).aspx
ric69 said:
Just tested on Sun_Y , it is working
You just need to edit HKCU/MUI/Curlang to your country code. (credits to [email protected] thanks for info)
For your code, search here
http://msdn.microsoft.com/fr-fr/goglobal/bb895996(en-us).aspx
Click to expand...
Click to collapse
not working with me
Not working !
this is working properly... install the cab then soft reset, edit HKCU/MUI/Curlang to your country code another soft reset and bingo your manila 2.5 with your language
Yes Musezicos is right, but with a rom manila 2.5 of course
vga / wvga? does this work natively on the diamond? how are the albums showing?