hi, i'm a new owner and there are a few things that are bugging me and i'm not sure if it's normal or if it's problematic.
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-keys are mixed up (i supposed because of the Japanese keyboard layout, and i think i saw a fix for this)
when sliding out the keyboard, it takes about 6-8 seconds to adjust from portrait to landscape(with the start menu popping up when going to landscape).
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
sorry for my noobishness and thanks in advance.
ok i've managed to solve the keyboard layout problem and i guess the delay is typical,. but the following problems/issues still exist:
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
thanks in advance.
anyone? any kinda help would be great
ji1386 said:
ok i've managed to solve the keyboard layout problem and i guess the delay is typical,. but the following problems/issues still exist:
-the start menu pops up sometimes when i slide out the keyboard. is this normal?
-the device can only be charged when the usb is connected to my computer, but not when the usb is connected to an ac adapter.
-is it normal for the touchscreen to be completely unresponsive when the keyboard is slid out?
-the touchscreen is completely unresponsive sometimes while the keyboard is hidden and i have to either press random buttons or slide the keyboard in and out to get response back.
thanks in advance.
Click to expand...
Click to collapse
Hi ji1386
I'm afraid that does not sound good. I have seen at least two other cases where the keyboard being slid out causes the start menu to pop up. It was concluded that pressure is being put on the touch sensitive screen by the mechanism. This is a hardware issue and can also show as programmes suddenly closing for no ovvious reason and I think this may also be responsible for the touch screen not responding when keyboard open. In summary pressure on the touch sensitive screen somewhere when there should not be.
If the device is under warranty I'd go for an immediate replacement. Perhaps just before doing so I would try a HARD reset just to be sure.
Mike
mikechannon said:
Hi ji1386
I'm afraid that does not sound good. I have seen at least two other cases where the keyboard being slid out causes the start menu to pop up. It was concluded that pressure is being put on the touch sensitive screen by the mechanism. This is a hardware issue and can also show as programmes suddenly closing for no ovvious reason and I think this may also be responsible for the touch screen not responding when keyboard open. In summary pressure on the touch sensitive screen somewhere when there should not be.
If the device is under warranty I'd go for an immediate replacement. Perhaps just before doing so I would try a HARD reset just to be sure.
Mike
Click to expand...
Click to collapse
hi, thanks a lot for the response. it really helps. now for the other problems
-is it normal for the the touchscreen to stop responding to taps when the keyboard is slid out?
ji1386 said:
hi, thanks a lot for the response. it really helps. now for the other problems
-is it normal for the the touchscreen to stop responding to taps when the keyboard is slid out?
Click to expand...
Click to collapse
No it's not normal. The screen should respond as normal. For example when using word, even with the keyboard ou you should still be able to tap for the soft keyboard, tap on bold, centre, tap in text to inser a word etc etc.
If you can't I think it's because the keyboard mechanism is somehow putting pressure at some point on the screen i.e the same issue as the start menu popping up. If a hard reset does not cure this then it's a repair job or replacement under warranty I'd say.
Mike
mikechannon said:
No it's not normal. The screen should respond as normal. For example when using word, even with the keyboard ou you should still be able to tap for the soft keyboard, tap on bold, centre, tap in text to inser a word etc etc.
If you can't I think it's because the keyboard mechanism is somehow putting pressure at some point on the screen i.e the same issue as the start menu popping up. If a hard reset does not cure this then it's a repair job or replacement under warranty I'd say.
Mike
Click to expand...
Click to collapse
thanks mike for all your help.
More bad news...since yesterday, the touch-screen no longer responds at all...completely unresponsive to tap or touch. I've tried hard/soft reseting and still got nothing...
I have however managed to get it to charge through a wall outlet. but it's a bit buggy...
Unfortunately, I bought this phone used locally and the guy isn't responding to any of my phone calls/emails, but whatever karma will come back to haunt him...I was thinking about taking this to a small claims court, but i dunno how to go about doing so and if my case will hold up...
anyway, I've had to take it to a repair shop. They said they'd order in a screen and replace it for $150 cad and it should fix it, if not a diagnosis charge of 20 bucks...
this should bring the total cost of this phone to $725cad...great...
Hopefully it solves all my problems. I'm guessing the start menu problem and the touch responsiveness problems get solved after this.
ji1386 said:
thanks mike for all your help.
More bad news...since yesterday, the touch-screen no longer responds at all...completely unresponsive to tap or touch. I've tried hard/soft reseting and still got nothing...
I have however managed to get it to charge through a wall outlet. but it's a bit buggy...
Unfortunately, I bought this phone used locally and the guy isn't responding to any of my phone calls/emails, but whatever karma will come back to haunt him...I was thinking about taking this to a small claims court, but i dunno how to go about doing so and if my case will hold up...
anyway, I've had to take it to a repair shop. They said they'd order in a screen and replace it for $150 cad and it should fix it, if not a diagnosis charge of 20 bucks...
this should bring the total cost of this phone to $725cad...great...
Hopefully it solves all my problems. I'm guessing the start menu problem and the touch responsiveness problems get solved after this.
Click to expand...
Click to collapse
I certainly hope it works out ok. Changing the screen assumes (possibly correctly) that the screen is at fault. If the screen is fine just getting pressure put on it somewhere then it will be a bit of luck whether it solves problem or not. A key problem here is that the screen is sensitive to touch, even on the area under the bezel - which of course is absolutely daft. Combine this with the fact that there is not a lot of room for heat expansion and the slide out keyboard can cause minor distortions in the casing and you have potential for a certain percentage of devices to have problems. Thankfully now far less than early models but still being reported.
Good Luck
Mike
Took it to a repair shop this week. Opened it up and looks like a damaged flex ribbon cable (possibly from sliding out the keyboard or just a faulty cable) is the culprit behind the unresponsive touchscreen.
Apparently those are impossible to find (if not very hard). i live in Canada where parts for these phones are quite scarce, so I'm not too sure what i should do. The guy said he could try to find a replacement part, but it'd take almost a month.
Anyway, just thought I'd mention it to let anyone with unresponsive touch screens know. I guess just add this to the list of possible causes.
how did you fix keyboard layout problem
Ji1836,
Can you please let me know how you solved the keyboard layout problem.
I also have a softbank X01HT with a japanese keyboard layout. I have upgraded to WM6 BLACK 2.5. But some keys are mixed up like the dot and comma and others as well. I tried the fixes in the wiki but nothing worked.
Aprreciate your help.
I have two HTC 8525's with Windows Mobile 6.1. They both are having the same funky keyboard problems... sometimes they work perfect - sometimes they don't. Sometimes when I push any key on the slide-out keyboard it will only activate the start menu. My only option out of this is to use the screen keyboard. The screen keyboards malfunction often as well... the delete button will stop working and my only way around this I've found is to change screen keyboards (from keyboard to letter recognizer or vice versa). Honestly, I know just enough about HardSPL's and upgrading ROMs to be dangerous. Maybe I fried it... but, any suggestions would be appreciated. Thanks!
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
I've had about 4 Hermes and never had a problem with the keyboard. I presume yours is a hardware problem but out of interest exactly which ROM are you using?
Need help, please. Got a problem with hw keybord. It doesn work. When I sliding it out, screen is rotate but keyboard doesn't switch on either no work any letter. What can be done? please help
jetriemen said:
Need help, please. Got a problem with hw keybord. It doesn work. When I sliding it out, screen is rotate but keyboard doesn't switch on either no work any letter. What can be done? please help
Click to expand...
Click to collapse
is your ribbon cable ok? also maybe it is time to get a new wizard or one with a broken screen.
I thing so, but I am not very sure of it. Of course,
I was in need to open my wizard and unpluged ribbon of keyboard, but I control it. All seems to be ok. Oh MY, what can be done??
There were two ribbons, one small, and the seccond is a bit wider. Think , both was connect well.
But now keyboard not work. Any suggestions, please?
today keybord which looks dead respond by key Z, all others are still dead. What does it mean?
Guys, I changed the housing of my old P4350.
Everything works perfectly. Screen, buttons, keyboard, etc.
Tha only issue is that the screen is not rotating when I slide the keyboard.
What did I miss?
anyone please?
no one? please help
Probably is only a frosen image If you leave the keyboard out for a while at one point the image should rotate if this is not the case you should try to soft-reset the phone or change to a more stable rom that may help and u will see a difference.
Worse case you may need to dismantle it again, there is a sensor between the screen an the keyboard that rotates the screen as it slides, I know is a pain to take it apart again. I also did replace my HTC 4350 with a black housing but did not encounter that problem.
good luck.
hi,
Recently i changed housing case of my htc p4350 herald.. all works great.. all keys works nicely.. only problem i have is when i pull out my qwerty keyboard, usually it should align screen so i can typ.. but its not aligning the screen it stays in portrait itself.. but keyboard is working fine.. very confused.. i checked all cables etc.. all r in their position can anyone pls suggest me something?