Hi all!
I 've tried to localize this device but without success.
I've found somewhere cab file with czech localization for WM6 tornado, but
I cannot it install.
Installer says: "Installation was unsuccessful. The program or settings ca not be installed because it does not have sufficient system permissions."
When I copied mui files to \Windows with total commander for wm and
added to registry
"HKLM\MUI\Available
parm name="0405" value="Czech" datatype="string"",
switched to Czech and restarted phone, nothing was changed.
I think that I have problem with certificates and privilege level of running application. For example I cannot edit all registry keys with Windows commander.
I've tried to use Security configuration manager form WM6 SDK but it didn't
change device's security mode.
I have these questions:
1) How can I install Czech localization to i616?
2) Is it possible to add my own certificate to provide my application running in privilege level?
3) Or is there way to switch security level of my device to allow applications run in privilege level?
Thanks you all.
ps: sorry for my poor english
Related
Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo
How does it differ from this CAB file I pulled off the HTC Apache?
I use this in my Extended ROM so that I can run unsigned applications, CAB files, and CPF files during the initialization procedure after a hard reset.
Hi BTT,
This is based on that exact cab. The only difference in enabling RAPI calls also, and doing it without needing user interaction, only needing a activesync connection.
Is a little utility I use for integration into batch files.
Bye,
Ricardo
Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx
Thanks Machinegod, this worked well. I used it on an XDA exec will it work with all WM5 devices?
Hi Machinagod
Is there a way i can call your routine from code?
I have developed software for WM5 but cannot access the database with the standard MS settings. I would like to give my users the option to unlock the rapi calls and install automatically.
Thanks in advance
Steve
ronaldovic said:
Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx
Click to expand...
Click to collapse
to ronaldovic: I believe this utility is for disabling signed applications so you can install apps that have not been signed. I have used BTT cert cab in my extended rom since he posted it (Thanks BTT, It has been very usefull)
If you are looking for disable cert check so you can activesync with MS exchange without a a SSL . Certificate connection, Micro$oft still offers a download to disable the cert sync check..
see http://www.microsoft.com/downloads/...b8-8b3a-4f1d-8e94-530a67614df1&displaylang=en
Miracle Registry
i checked many registry of "Security policies" in different device, and also SDK.
http://asukal.seesaa.net/article/12583144.html
You can understand how change it for your neccesity.
this was for your refference.
and also i got made one registry file which has many "Certificate Sotre"
from different setting devicees and CABs and SDK Emu.
This registry make your device to enable working many kinds of dll and exe or any other files without digital signed(not for all)
multi user interface files also can effect without digital signatures.
(shellress still can not, but worked with Smartphone signature)
The security revel will be same or lower than SDK emu.
but not completely finish to edit it.
so possibility of some side-effect or unkown problem.
Hope understand this point and use it as test.
But once you use this registry, you got understand why i said it miracle.
just import this registry and make soft reset.
"syntac error" displayed when you import this, but works.i will cheking the reason of this error.
lets test it.
Re: MachinaGod RAPI Unlocker - certificate disable on WM5 v0
I try to use it on my new Jamin but nothing happen.... Prog still not work.
Pls I'm a newbe, Can you help me ?
Thanks a l ot
Hi MachinaGod,
Could you tell me please what exactly this RAPI unclocker is doing? Is it possible to undo it? RAPI locker or something? Is there any security threat after you execute tis program?
Thank you!
cingular
please tell me what tool can unlock (simlock) my cingular 8525, Thank you very much!
hmmmmmmmmytfghvghdgfgfdtrsdr
unlocking spv m1500
hello,
i tried the RAPI unlocker but it did not work,
could it be because my Pocket pc is running 2003 CE?
hi
someone can send me the file i can download him pls
and one qwuestion this unlock mi simlock???
htc 8125 need help please
machinagod said:
Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo
Click to expand...
Click to collapse
i have a htc 8125 and tried your method and it never gave me a code but when i put my sim card in it says sim lock and unlock? explain how to unlock this d$$m phone.It is a cingular phone but i dont have that service.it is version 2.25
[email protected]
Hello all,
Attached is a simple CAB file that should have set the PIE user-agent stuff to be identifying the thing as IE6. I think there may be others around, I know I've seen it in a larger cab, so don't worry about this specific function. My question is regarding the fact that when I try to run it on my HTC Wizard (running WM5), I get "Installation of PIE_as_IE6.cab was unsuccessful".
I built the CAB off of the "CAB Template.cab" from http://forum.xda-developers.com/viewtopic.php?p=113615#113615 - just in case I'd run into that version issue with WM5.
Any thoughts out there on what's wrong with the CAB? Or is there a different reason it won't install?
Hi, what CSP are you using to change those settings and how are you deploying it to the device? Chances are access to that provider is restricted to a higher security role than what the cab file has permissions to do. RAPI still has access to most service providers by default but if you're downloading the cab over the air to the device it'll probably need to be signed with a suitable certificate before it's allowed to make setting changes. Mobile 5.0 security has been beefed up and its now a bit of a mission to do what was reasonable simple to do on 2003. All cpf files need to be signed if not deployed over RAPI as well, for even something trivial like adding a browser favourite.
editor is OCP Software's WinCe Cab Manager (version: 1.1)
deploy method is copy over USB cable by ActiveSync through Total Commander+WinCe Device access plugin. Execution of CAB is on the device itself through Total Commander CE or Explorer.
No CSP in use (err.. afaik).
You may be right that the part of the registry in question may simply be unavailable to access without special signing. I'll have to dig for those keywords a bit.
Yeah...the more I research Mobile 5.0 security the steeper it gets. It seems security permissions extend all the way to file IO access. Writing certain recognized system files (like theme files) without adequit permissions effectively renders those files as untrusted and they stop behaving in their expected manner. Its a pain.
I've recieved a QTEK9100 (HTC Wizard) from my employer. The ROM-version is 2.18.7.4 NOR.
This unit seems to be application locked in some way.
Among other things, I have tried to install two different sharewhare GPS-programs on this unit (PTGMAP and OZIExplorer). When installing or running the .exe files i get error messages like:
- "Cannot open the file PTGMAP. It either lacks a signed certificate or cannot find one of the components" (my translation).
- ".. can not be installed because it does not have a digitally signed certificate" (also my translation)
- or simply "cannot be installed"
I've searched this forum and quite a few others, but I have not been able to find a solution. I've found some .cab files, but these have been for other units that the QTEK 9100/HTC Wizard. I was even able to install this one, but it seems to have made no difference:
ftp://[email protected]/Universal/Extended_ROMs/Default_Signed_DisableSecurity.CAB
(I do realise this is for another unit)
I've also tried SignCode - It's says that the executable is certified, but I still get the same error message when I try to run the programe.
Finally, because my ROM has been configured (by an external supplier) with Pylon Anywhere for syncronization, I guess I can't install another ROM, as I will lose this software which I need.
Can anyone help me here? --- Please!?! ---
Try this reg tweak
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
Registry editor
but... I've tried to install the registry wizard:
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
But I get the same error-message "cannot install RegistryWizard_PPC_ARMV4.cab"..
Any ideas?
Copy this exe to your device via activesync and click on file through file explorer. It is a registry editor and go to those keys i described.
Still doesn't work
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Re: Still doesn't work
kloksa said:
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Click to expand...
Click to collapse
Try the above file in main memory - take your storage card out and soft reset. Then click on the file again - sometimes it is a corrupt storage card that causes that error. Otherwise its some software thats caused this security error and you will need to hard reset or update rom. Yes you would have to reinstall all your software.
If I install the Windows Update.xml from the XPlode package can I then problem-free my equipment update or can thereby are determined that I no legal WM6 use?
Sorry for my bad English.
tested this function but not new updates are available.
hello!
do i have to install those included XML-files in explode's cab pack as well?
how can i install XML files....?
pleas help!
thx,krz
The readme file xplode put into the archive has the instructions.
or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install
xplode said:
or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install
Click to expand...
Click to collapse
okay! lets see if i got that right! if i use the updated cabs from cabs2.rar, the XML files from the original cabs.rar become obsolete, right?!?
very cool, thx guys...
yes you understood me right
I have installed both cabs, but when I try to search for updates it says "connection to the update server was not available. Check your data connections and ensure the date and time are correct."
I have done this, but with no luck???
you did not install the WU enable cab, or the instalation was unsuccesfull try to install it again
hi guys, need your help to provide the Pocket Internet Explorer "default" registry as i had just screwed up mine after experimenting..
1. use PHM regeistry editor
2. HKEY_LOCAL_MACHINE
2. SOFTWARE
3. Microsoft
4. Windows
5. Current version
6. Internet Settings
7. 5.0
8. User agent
at down here, do you mind to provide me your data for:
1. Compatible
2. Default
3. Desc
4. Platform
5. UA-Language
6. Version
thx..
Intall Microsoft Device Emulator: http://www.microsoft.com/downloads/...a8-1dd7-426f-a913-4f370a65a582&DisplayLang=en
Windows Mobile 6 Professional Images (USA).msi is the file you need perhaps.
Start it ... install some registry editor and look at the default values.
When i screw things up ... that's what I do.
the problem is, i only need the original registry from the hp ipaq 6965 PIE on wm5..
Then download Device Emulator Images for Windows Mobile 5.
I don't think that there will be great differences in registry settings in Device Emulator Image and your device -- maybe just the homepage of the PIE.
P.S. I don't quite get it ... "Trying on PIE WM2006" and then you ask "original registry from the hp ipaq 6965 PIE on wm5" ... please be more specific.