If I install the Windows Update.xml from the XPlode package can I then problem-free my equipment update or can thereby are determined that I no legal WM6 use?
Sorry for my bad English.
tested this function but not new updates are available.
hello!
do i have to install those included XML-files in explode's cab pack as well?
how can i install XML files....?
pleas help!
thx,krz
The readme file xplode put into the archive has the instructions.
or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install
xplode said:
or everyone can use cabs2.rar
so if you have both cabs.rar and cabs2.rar you will have in one place a cab for installing mms and a cab for enable it in messaging app, a cab for installing windows update and a cab for import server settings for update (enable the capability of update), and a cab for windows mobile device center under windows vista (some settings about manifacturer - t-mobile and model mdaiii, support link, high res BA icon). So you have no more xml files, i created cabs from them for easy install
Click to expand...
Click to collapse
okay! lets see if i got that right! if i use the updated cabs from cabs2.rar, the XML files from the original cabs.rar become obsolete, right?!?
very cool, thx guys...
yes you understood me right
I have installed both cabs, but when I try to search for updates it says "connection to the update server was not available. Check your data connections and ensure the date and time are correct."
I have done this, but with no luck???
you did not install the WU enable cab, or the instalation was unsuccesfull try to install it again
There is a 100% legal way to test how will perform a given application created for WM5 or previous releases into WM6 without the need of upgrading the Athena ROM.
I needed this to test a push-mail application developed for WM5. My idea is changing my X7500 to WM6 if and only if the push-mail application I'm considering works on WM6. Since taking the X7500 back to WM5 once you changed it to WM6 looks impossible I look for a solution to test before take the decision.
So... I found that WM6 emulator from Microsoft is free and freely available and emulator images are free too and freely available at microsoft.com
You will need:
Microsoft Device Emulator 2.0, which is the emulator itself. This program does nothing without the emulator images but you need the program, off course. Here is the link:
http://www.microsoft.com/downloads/...53-f231-4a64-a648-fea5e7061303&DisplayLang=en
Then you need the emulator images... let's call them ROMs if you want... but they call'em emulator images.
Windows Mobile 6 Localized Emulator Images, just donwload the ones in your language. I suggest using the profesional ones since in that set there is one called VGA Professional that match the features of our X7500. Here is the link to all languages:
http://www.microsoft.com/downloads/...a8-1dd7-426f-a913-4f370a65a582&DisplayLang=en
Just donwload and install the Device Emulator 2.0 (the first link I mention) and once installed donwload and install the profesional emulator images in your language.
Find the entry VGA Profesional in your Start menu in Windows XP and just install the application you want to test in your emulator.
Simple.
Best Regards,
mahjong
Hi all!
I 've tried to localize this device but without success.
I've found somewhere cab file with czech localization for WM6 tornado, but
I cannot it install.
Installer says: "Installation was unsuccessful. The program or settings ca not be installed because it does not have sufficient system permissions."
When I copied mui files to \Windows with total commander for wm and
added to registry
"HKLM\MUI\Available
parm name="0405" value="Czech" datatype="string"",
switched to Czech and restarted phone, nothing was changed.
I think that I have problem with certificates and privilege level of running application. For example I cannot edit all registry keys with Windows commander.
I've tried to use Security configuration manager form WM6 SDK but it didn't
change device's security mode.
I have these questions:
1) How can I install Czech localization to i616?
2) Is it possible to add my own certificate to provide my application running in privilege level?
3) Or is there way to switch security level of my device to allow applications run in privilege level?
Thanks you all.
ps: sorry for my poor english
I was reading and searching, when i saw this:
Some Windows Mobile smartphones have a safety lock that prevents the installation of "non-certified" (eg MIGSoft SmartTweaks) or editing the content of the record. But beware: this block has nothing to do with those that prevent the use of a device outside of a particular operator.
To perform the unlock, just change two registry keys using a registry editor (but read the specific topic on hacks and the care you must have):
1. Go to: hkey_local_machine \ security \ policies \ policies
2. Change the value of key "00001005" to "40" (without quotes);
3. Change the value of key "00001001" to "1" (without quotes);
In my first Motorola MotoQ CDMA Windows Mobile 5.0 could make this change without any major problems. However, after returning from service, which has changed the board and the ROM version of the device, this key Windows Mobile could not be changed. After some research, I found the procedure that allows the release of ROMs where the editing of this registry key can not be changed - by remembering that this is a hack I'm not responsible for any damage that might do to the system. Test at your own risk:
1. Download and install Device Security Manager Powertoy for Windows Mobile 5.0 from Microsoft. http://www.microsoft.com/downloads/...8c-d587-47e0-908b-09fee6ea517a&displaylang=en
This application shows the type of security policy in the existing Windows Mobile device connected to the PC. Warning:
this software crashes on Vista, but you can use it according to the desired result;
2. Connect the Q to the PC, wait for sync and run the program. You will see "two tier" in the "security policy" if the device has the protection of editing the registry;
3. Download the file secpolicies.cab http://sems.org/content/download/secpolicies.cab amending the security policy. This file is from Telus States
United States;
4. Install the file, moving it into the device and using the file manager of Windows Mobile, click it (run it);
5. Run the application again Device Security Manager Powertoy for Windows Mobile that should now show the value "tier one".
It is done.
Original Post from http://www.seidimobile.com.br/2008/06/05/desbloqueio-do-windows-mobile/
Finally after several attempts i managed to set the full web experience also on IE mobile version.
After these small changes you can navigate in the same way as a traditional PC:full web experience on flash player(also Youtube\editor),macromedia active-x and i think applet java(?).
Go to on the folder:
HKLM\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent
and set the following keys:
(Default) ->Mozilla/4.0
Compatible ->compatible
Desc ->Default(Windows CE)
Platform ->Windows NT 6.1 [set to Windows NT 6.0 for OS Vista]
UA-Language ->JavaScript
Version ->MSIE 8.0 [set to MSIE 7.0b for InternetExplorer 7]
Template ->Same as Windows 7
See the key Templates for restore the original values if necessary.
No softreset required,you just check the proper operation over http://www.useragentstring.com/
-tips- For a better navigation in this mode is recommended temporarily disable htc sense (more ram).
Tested on my HTC T5353 Stock rom WM6.5 build 21889
Enjoy!
[HOW TO]Set Opera useragent like IE8 desktop on Win7(or IE7 based Win Vista)
Ok the same can be done on the Opera browser.
For now only tested on stock version 9.7 Build 35627
It goes this time to the key and change to:
HKLM\Software\Opera\Prefs\User Prefs
String value:
Custom User-Agent ->Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1)
Even here you can change the Platform/Version value for the switch Browser/OS system (see the first post).
-tips- Please backup the entire folder if you need to go back Simply use any registry editor for this.
For Opera 10 users,this string is written usually on opera.ini (ini file) localized in %InstallDir%\profile or simply you can access this information with the command without "http://"-> opera:config from the browser.
Feedback appreciated!
Excellent Information. Thanks for Sharing.