Hi -- I can't seem to get Card Export II working on my P6500. Does anyone have any suggestions or ideas?
Thanks!
Alan
Might it be because you have more than 1 card on the PPC?
Try running the app without any SD cards and see if it recognises your internal nand flash .
Problem with SD driver
Thanks for the response. The folks at Softick have done some debugging with me and managed to make a version of Card Export that _basically_ works on the Sedna. I'm still testing it, but it seems to work best with the Hermes workaround activated.
There are still occasional problems, which seem to be the result of a problem with the Sedna SD card driver. This is what the Softick engineers reported:
"From the files I see that problem with Storage Card1 in not the problem of data transmisson between your P6500 and the host computer, but merely write to/read from the card problem. Card Export calls system function to perform card read/write, and sometimes the call hangs. This could be due to the malfunction of the card controller or of the card itself."
The card is fine -- I've used it with no problems in other PDAs and card readers, and I've reformatted it and run Chkdsk. I've noticed other problems with the card in the Sedna, however, so it seems to be an issue with the device. I'll do some more testing make a separate post about this if the problems seem consistent to the phone.
Related
Hi all,
I have searched hi and low for the resolution to my problem. I have owned a Magician (sold as Xda II Mini) for just under a year and have a 1Gb SD card (eagletec turbo 66x speed) which has worked beautifully until two days ago
File explorer does not recognise the SD card. I have tried the SD card in other devices (e.g. PC - using a card reader, digital camera, dvd player, my friend's pda etc...) and it works fine.
I have tried inserting different SD cards into the Magician and they all get recognised ok.
I have tried soft reset and hard reset to no avail.
I have formatted the SD card using a card reader on the PC (tried both FAT and FAT32) and also tried formatting it in my digital camera.
When I insert the card into the Magician (from power off state), the Magician does light up indicating to me that there is no problem with the spring load mechanism of the expansion slot. What is strange is that when I go to Settings->System->About, I get 'Expansion Slot: Not in use'
I also tried (after a suggestion in another post) to add a "shim" of plastic of paper on the contact side of the SD card. No use.
I am reluctant to flash the ROM as I have not had any other problems with the Magician to warrant it.
Any ideas?
Have you tried cleaning the contacts of the SD card? Try soft resetting with the SD card in it.
Hi thanks for replying.
Yes I have cleaned the contacts of the SD card and also tried many soft resets with the card in and also with the card out.
????
Hello,
Try formatting your card with a different reader or from a Nikia phone.
Regards
Carty..
I have tried formating the card in several card readers. Still not being recognised is file explorer. Again, the card does work in any other device I put it in - just not my mini
Anyhow, I'll just use a different card for now. Just wondered if any other people had the same issue as I do.
Thanks all.
for me the same **** happened with my new, exchanged, mdac. using the sd card with the previous machine was no problem, now the card is not being recognized at all. using it in notebook, camera ... no problem.
any ideas?
i dont want to start another thread but im having the exact same problem with my MDA Compact II. I have a 1gb Toshiba SD card that wont even work in the MDA but it works fine on my camera and PC. So I would like ot know if there is a solution to this
Thanks
Hi all
I am a newbie and am experiencing the same issue, external sd card not showing up in file explorer.
Sniffer can find it and I can play media files from there. Is this the norm or do I need to change something?
I am using C&C 1.5ghz Froyo Combo VERSION 8 final.
The 16GB card is seen by all other card readers I have tried.
After using my vario 2 for a while the mem card becomes unusable.
It's shows no free space at all. I have a 1 gb memory that came with my t-mob vario 2.
My mp3 ring tone doesn't work anymore. I have to remove and reinsert the memory card or soft reset the device.
Radio 1.20.31.10
Rom: 1.21.114.3
Any idea's what could be the problem?
Thanks
The smilar problem occured with one of my XDA-II (Himaliya), Even though I have hard reseted the device. Finnaly I have backuped the card through the pc and format the card (on PC) and it wasn't working, even though I have tried 3 other cards and they were working absolutely fine with the device. What I did was to leave the card inside the device for overnight and it was recognisable in the morning, then I took out the card from the device to put the data back from the PC and once I have put the card back in the device the card wasn't recognisable again, So finaly I left the card again in the device overnight and it was recognisable again, then I left the card in the device and put the data back through the syncronisation.
I haven't taken out the card since then because I know there is some recognising problem between the device & the card, its working since then.
My Advice is : To check another card and if that would work then try to sell your current card and buy another.
My advice 02: Try to backup your device, leave the card inside the device and HARD Reset the device & once the device will install newly it should configure the card as well.
I have got very usefull software "storagetools" (trial) by which you can scan, format & defrag the card, you can try it.
GoodLuck
Sidd
Use chkdsk on the PC to check your storage card (instead of any PPC-based software, including Storage Tools). I also recommend the thread at http://www.pocketpcthoughts.com/forums/viewtopic.php?t=39583 on all these q's.
On a related issue concerning problems with microSD cards and the TyTn, I have a problem which I hope you can help me with:
I have a new TyTn (ROM Ver. 1.18.255.3) with a 512mb miniSD card. In the course of my usual usage, the device hanged and after a few minutes of unresponsiveness, I reset the device using the reset button. When it rebooted, the card is no longer recognized by the phone. I used a card reader and WinXP and Mac OSX cannot also recognize it. If I try to format it (XP), XP says that the card cannot be formatted. I tried using it in my Samsung D820 and it cannot also be formatted. I then concluded that the card was defective and bought a new one (512mb).
After using the new card for a week, my TyTn hanged while accessing a program installed in the card. Again after a few minutes of unresponsiveness, I rebooted the phone using the reboot button. When the device booted-- Bam!!! the card can no longer be recognized by my phone! Windows and Mac OSX cannot mount it. I tried the unrecognized card in my Samsung D820 and it is recognized! I inserted the miniSD card (128mb) originally in my D820 in my TyTn and it is recognized/read by the TyTn. I formatted the defective card in the D820 and copied a few files in it and the D820 can read those files but my TyTn can't! I tried the other 128mb card on my TyTn, formatted it and copied files into it and everything's fine.
How come then that the 512mb card can be read by my Samsung phone and not by the TyTn? My TyTn is certainly not defective because It can access the 128mb card that was originally in my D820. As I stated earlier, I have already formatted the 512mb card in my Samsung phone and have transferred files into it (The Samsung phone can read the files written on it).
I have re-inserted the 512mb card numerous times in my TyTn to no avail. I have also rebooted my TyTn several times and still it cannot recognize/read the 512mb card. I am now using the 128mb card that I originally use in my Samsung D820.
If it can help, I have enabled and unlocked my TyTn's extended ROM. I have a few programs that are installed in my Ext ROM.
Thanks!
Similar card problem
I recently purchased the T Mobile MDA Vario2 with the CoPilot 6 software. worked fine for about a week and then the CoPilot software which was running from the memory card started to hang intermittently. The first couple of times a soft reset cured it. Then after about the third soft reset, the memory card was no longer recognised. Tried reading the card via my pc and that couldn't recognise it either.
Took both the phone and card back to T Mobile where a new card was tried, this was recognised immediately so I now have to take the whole CoPilot package back to be replaced.
I have also just orderd a new 1GB sandisk card from Amazon and am now concerned that this is going to be a repeating issue. I wonder how many other owners have had this problem and if it is actually a fault with the Vario2 or wether I have just been unlucky with a dodgy memory card.
Would appreciate other thoughts on this.
Cheers
Matt
I think that enabling the "Advance network functionality" causes the corruption of memory cards.
amf said:
I think that enabling the "Advance network functionality" causes the corruption of memory cards.
Click to expand...
Click to collapse
How did you work that one out?
Elwyn M3100 said:
How did you work that one out?
Click to expand...
Click to collapse
Because when I enabled it, the corruption started.
amf said:
Because when I enabled it, the corruption started.
Click to expand...
Click to collapse
Hmm, yes, I can see where you worked that one out
Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.
If i want to paste a file in my hd 2 memory card a massege sys : The device has either stopped rsponding or has been disconnected, but if i conncet the memory card to my laptop directly it works normaly. Is there any help please?
weird, my digital camera gave me the same exact problem yesterday while trying to create a folder inside the internal sd card.
Try and connect the device in usb disk mode instead of activesync
I tried it on both but it's the same problem, I formated the memory card and I inserted a new sd card and the problem still, any help please?
Hard Reset
I made hard reset but the problem is still, any help please?
I've had this same problem with different MicroSD HC cards (2x16gb, 1x32gb). I posted a question about it a while ago, and the general consensus was that they were probably fake cards (which is a possibility seeing as I got them off eBay).
I tried soft/hard resets, different ROMs, Active Sync/File Transfer connection modes and nothing worked... it mainly happened when I was trying to copy music. In the end, one of 16gb cards accepted enough of my files for me to get by, so I'm just gonna save up and go fork out for a legit MicroSD card from an electronics store somewhere. Might be the only option.
Google h2testw, that will help figure out if it's a real or a fake card. Good luck.
I could solve the problem by installing another browser and re-download the cabs, and it works perfectly thanks.
Hi
I'm having such problem. Tried different types of SD cards, first one was Trancend 16GB class 10 (high speed). Second one Trancend 8GB class 6 (medium speed). Third one some noname 4GB... So, I've got the same reading problem with all of them; intermittent reading and even card recognizing issue which is rendering SD card reader useless on device. I should highlight the thing that all cards perfectly being read in all other devices when pulled out of Shift and inserted in any of another devices. Tried to do different things, reinstalled drivers few times and so far... Seems this is strange hardware issue (compatibility issue?) arises in windows 7 enviroment. It's so upsetting, I don't want to come back to slugish Vista but I really need SD card reader!
I did not see many posts about it, so is anyone else having similar problem? Can you please share ideas and solutions of the problem if you overcame it.
i was having the same problem but after i did a windows update it was working fine, i have a A-DATA SDHC 16GB card.
lovray21 said:
i was having the same problem but after i did a windows update it was working fine, i have a A-DATA SDHC 16GB card.
Click to expand...
Click to collapse
But my windows always up to date, including hardware and optional updates.
Maybe you remember what was that update which resolved card reader issue?
similar issue
i not that i can't acces on MicroSD card and Win7 ask to formatting it
i put in on XP Desktop
earase copy somes files
put it again in the shift
and i can access it
don't know what is the problem ?
Apply the BIOS update from the HTC website and all will be fixed!
Well !
first i was sceptique
On the HTC site
the Bios rev number
it is write v1.0.0.8
and my installed bios was v1.0.0.18
When i open the bios Flash utility
i see that the new version is 1.1.0.xx
i've install the non-UK file as indicated for non-uk shift
Installation was a success and very easy
but i still have the same problem with MicroSD card in internal SD card reader slot
I will check for EC driver i see somme where and tell you for result
still have SD PB
ok,
know i can acces to my microSD card in the SD card reader slot
with MicroSD to SD adapter
but when i use my other adapter that is
MicroSD to MiniSD to SD card adapter
the Shif ask me to format the MicroSD card
even if i use my USB Transcend SD card reader directly on USB
with the MicroSD to MiniSD to SD card adapter
In my XP PC no problem with this Dual Adapter !
Sniffff, i'm sad
SD card
Hello, so I use an SD card Transcend 32GB Class 10 and when inserted into the slot, but not log in to read it, but when you connect to the Internet and runs a minute and we can enjoy. When the shift to fall asleep again I have to pull the card and the data again and goes, but I'd wanted to tread do not normally have someone an idea or gimmick? Thank you for your reply, Mirek
someone solved?
I have the same problem