uk Vodafone, O2, Orange and T mobile settings for xda II and Xda IIs. copy these files in ur XDAxxx and run it.
Is there one for Virgin UK by any chance?
Thanks
Regards
Twojags
was gonna ask the same thing too
RE: GPRS and MMS settings
Hi,
Follow this link, Ihave uploaded all the available cab installs for UK carriers, contract and PAYG.
http://forum.xda-developers.com/viewtopic.php?t=26463
These are the latest version 2.0, as I have seen some earlier versions elsewhere on forum. :twisted:
where in the registry is this information located?? it works fine on the qtek 9100 wm5 but it will only show one of the connections in the connections listing. i istalled gprs monitor and it offers to monitor about 5 different connections that the cab file created. I can only see one of these. Where in the registry would I go to delete the ones not being used???
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
RE: MMS Settings for JasJar / Exec
ta_ said:
hi,
I just go my exec and i managed to set up (manualy) the gprs /3g connection so that i can surf the net.
what i cannot do is set up my mms. i also tries the cub files that you uploaded here but...no good.
i have a pay as you go Vodafone UK and i NEED HEPL!!! i have already lost 3 mms.
thanx to all
Click to expand...
Click to collapse
Good point, I obtained these files in my earlier link from the I-mate website, I know they work upto Alpine version on WM2003SE.
I don't have access to the I-Mate JasJar section, the cab files were designed for WM2003 & SE, I think that WM2005 probably has a different registry configuration. maybe if somebody has a JasJar, they can get can get the correct files for JasJar Mobile Carriers in I-mate JasJar section. Also Checkout the Unversal section on this Forum, somebody maybe able to help you there.
Settings for 'THREE' Network plz
hello
does anyone have the settings for '3' network?? thanks
I have an XDA an O2 Genie SIM.
I have managed to connect tonight to some sort of O2 portal but the text there is out-of-date. How do I get proper HTML pages?
I have the correct settings from O2. Does something need to be done to the XDA?
Thanks.
It seems that only wap is now available on the O2 pay and go system.
I have upgrade my o2 xda exec to the latest qtek rom.
However i do not how to setup the various o2 services.
Anyone know what they are and where they go?
thanks.
The simple answer to your question is yes I do.
If you want the settings there is a thread somewhere with a cab file that you simply run and it will put all the settings in for you.
I can not remember where the thread is but once you find it put the file somewhere safe for next time.
I could send it you if you PM me your email address.
these ones work fine on my exec i also used these ones fine on my old spv m2000
do all the ones that quqi sat says
http://forum.xda-developers.com/viewtopic.php?t=13861&highlight=
thanks alot!
i did search but to no avail.
however i killed my less than 24hours old xda exec. trying to fix it in the upgrading thread.
im gutted...
MMS on o2 xda exec (contract)
still no luck with MMS on o2 xda exec (contract)...
anyone out there have one?
check this site
http://www.modaco.com/lofiversion/index.php/t233876.html#
i sort of asked the same question last week and someone kindly posted a cab file for the settings in the thread
http://forum.xda-developers.com/viewtopic.php?t=46540
thanks.
it appears my problem is setting up Push Email and MMS.
they want to use different gprs settings...
Hi,
First I have to tell you that I've got the HTC Uni/MDA Pro from T-Mobile. It's a fantastic pocket pc and it's also great as a mobile phone but I've got one problem.
Till the end of august I've got the "Mobile-TV" option for free but I think I can't use it at the moment. The instructions from T-Mobile are: "select t-zones and then TV&Video > MobileTV". But just after I've bought the MDA I installed the Qtek Rom so I can't find the "t-zones" anywhere. Is there any possibility how I can watch/use this "MobileTV" option? Maybe after installing a CAB or something like that?
Thanks a lot
TCK
TCK said:
Hi,
First I have to tell you that I've got the HTC Uni/MDA Pro from T-Mobile. It's a fantastic pocket pc and it's also great as a mobile phone but I've got one problem.
Till the end of august I've got the "Mobile-TV" option for free but I think I can't use it at the moment. The instructions from T-Mobile are: "select t-zones and then TV&Video > MobileTV". But just after I've bought the MDA I installed the Qtek Rom so I can't find the "t-zones" anywhere. Is there any possibility how I can watch/use this "MobileTV" option? Maybe after installing a CAB or something like that?
Thanks a lot
TCK
Click to expand...
Click to collapse
first: configure the web-access - I think you've already done that.
2nd: configure WAP access over the net access: I've reached that configured the WAP proxy in the settings/connections menu editing the net-connection.
now you have to find out the wap portal's address.
use wsp:// tag before the address.
The only problem is to make sure that this download through the wap proxy doesn't use your monthly data amount included..
The wap page is wap.t-mobile.co.uk or www.t-zones.co.uk
Hi folks,
I just received my HTC TyTn today and thought I would post to say that it is AWESOME! So much smaller and pocketable than the Exec, 802.11G and a very slick keyboard.
Also, and more importantly, I found that the O2 Settings CAB from my old XDA EXEC works 100% perfectly on this device for setting up MMS / 3G GPRS / WAP etc. Its a single cab which simply installs those settings and no other O2 Active junk etc. Bear in mind this is for O2 UK only and will probably screw-up your device if you are using it in another territory.
I fully tested this with email / terminal services / mms messages and all worked perfectly. I have attached the CAB in a Zip archive (don't forget to log in to see it).
I hope someone finds this useful.
All the best,
Codeus
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Yes, the Exec which I got the .cab from is also a GPRS 3G phone. so it works perfectly.
I tend to copy useful little cabs like this to my flash card and make them read-only so I can reinstall should I ever have to hard-reset on the road.
Codeus
mrvanx said:
lol wish i had this when i got mine, i had to manually enter the settings which was a right pain....does the cab install the settings for the http AP over GPRS/3G rather than the standard wap one??
Click to expand...
Click to collapse
After about an hour of stumbling about trying to find O2 settings for my TyTN I found your post .... cab is absolutely fantastic, thanks!
GPRS
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
O2 settings
Jackjack said:
A bit new to this but hoew do you use the cab codes you have given us.
And do you no if it will work with the o2 pay and go sim
Regards Jack
Click to expand...
Click to collapse
This is a very handy Cab file. It is likely to be for those who have a data tarriff i.e subscribed to mobile.O2.co.uk and not payandgo.o2.uk. However all is not lost because you can still install the cab file and then through connections menus you can tweak them for payand go. The following reference shows the different entries between payg and contract:
http://www.mphone.co.uk/mms_wap_settings_o2.html
Installing the cab file. Just download it either directly to your device or to PC. Do not extract or expand the file if it's on your PC just open active sync, use the explore button to open your device files and put it where you want (storage card for preference). Go to your device and tap/double tap the Cab and it will run.
Mike
O2 Cab file
JackJack
I've just noticed your in the US. This cab file is for UK so I guess not much use for you. What I said about Cab files still applies in general though. You'll often find a choice as to whether you want to download a Cab file or an EXE file. Generally (not always) you run Exe files on your computer and they install to your device (while your conected with activesync). Cab files you copy onto your device and just tap them to run them. I like these cos I can store all the good ones on my SDcard and if I ever have to hard reset I have them all ready to tap and install again without resorting to the PC to reinstall everything.
Mike
mda cab file o2 settings
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
lady_tweetie said:
i have a mda compact phn which is a t.mobile company.. its been open 2 o2.. i wld like 2 use internet but i wld like d settings
Click to expand...
Click to collapse
plse help am nw at dis
Brillant, thank you
Thanks for that CAB, just used it to get my Kaiser working.
Just had to change the username and password in the settings and works perfectly.
Many thanks for sharing it.
I tried using this cab, and so far it seems to be all good, but I still can't get my MMS working. They haven't worked since I moved to 02 last year and still using my Vario II.
I've just flashed the Faria32 rom and I'm loving everything so far. I was hoping that this would now start working. Does anyone have any suggestions? Or is it just part of the deal with using a non O2 handset? Internet seems to be working fine... just no mms.
Incoming MMS problems on o2 PAYG fixed
I've had a problem with O2 PAYG, after installing the CAB and changing settings from contract to PAYG everything worked except incoming MMS (outgoing was ok). Eventuially I set O2 Active as my work connection, altered the O2 Active access point to payandgo.o2.co.uk, username=payandgo and password=password. The only proxy set was WAP=193.113.200.195:9201 In the MMS settings, the everything was left as default (connect using O2 Active, gateway 193.113.200.195, port 8080, server http://mmsc.mms.o2.co.uk:8002)
Not sure why I had to use O2 Active instead of my internet connection with WAP proxy set, but it works now. Happy Bunny
Incidentaially, O2 refused to help me because the Hermes (O2 Trion) is only supported on contract. I guess if you are on PAYG, you could move to a simplicity plan for a month, get O2 to help, then go back to PAYG and change the settings back to the payandgo ones.
One of the reasons I went back to O2 is cos I've always had good customer service... I'm beginning to rethink that with their "computer says no!" help...
Thanks for the help i'm going to see if the O2 Active settings help me at all.
Anno 2009 still working, thank you.
tytn 2 gprs probs on o2 pay and go
hey all
if u are a pay and go customer (im on o2) when ur setting up ur connections simply enter the contract APN in the access point area..not the pay and go one as its restricted. I did this and boom the tytn was on the net! I suspect this could be the same for other pay and go sims. Hope this helps those of u who were bangin their head against the gprs wall of pay and go smartfone world.
Here's the cab file for setting up gprs and mms for PAYG.
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
keenan316 said:
Sorry for being such a noob, but what do I do with the cab files after downloading them..?
Where do I copy them to..?
Do I extract them..?
Click to expand...
Click to collapse
Download, copy to device (anywhere, even storage card), run on the device and let it install. That's it.
thanks this worked great on my pay and go O2 HTC Touch Diamond P3700