Anybody Know Were I Can Get The T-mobile Housing And How Hard Is It To Install The Front Part Any Info Would Be Really Appreciated
I saw a few on ebay that are for the top part and battery cover but none that included the buttons or slide assembly. Which parts do you need and I can see about ordering them from the HTC parts supplier I deal with.
I Need The Front Housing And The Battery Cover And If You Can Get The Slide Assembly Mine Is Kinda Off Let Me Know Prices
Wing housing complete!
odm420 said:
Anybody Know Were I Can Get The T-mobile Housing And How Hard Is It To Install The Front Part Any Info Would Be Really Appreciated
Click to expand...
Click to collapse
Here ya go: http://www.cellulardr.com/products.php?cat=299
Shep
Thanks for the link!
Related
Hi Guys,
I need to get my hands on a FULL replacement housing for my O2 XDA EXEC. I've look all around with no luck.
Any help????????????????????????????
Thanks
Housing
Have seen them on Ebay, here and here
Thanks a lot!!!!!!!!
Unfortunately, no hinge. They do pop up occcasionally.
Try here
I have found somewhere at claims to have Genuine replacement housing in both Black (£42.95) and Silver (£39.95) go to http://www.mobilefun.co.uk.
Hinges and full replacement housing
Bully said:
Unfortunately, no hinge. They do pop up occcasionally.
Click to expand...
Click to collapse
Found some on Ebay, but not necessarily branded O2, search for Vodafone one, hinges are offered separately and can be purchased to match the main housing cover from the same sellers.
enigma1nz said:
Found some on Ebay, but not necessarily branded O2, search for Vodafone one, hinges are offered separately and can be purchased to match the main housing cover from the same sellers.
Click to expand...
Click to collapse
no hinges for a long time
Does anyone know where i can get a replacement fascia for the qtek 9100/xda mini s? Or if anyone has themselves done the job how difficult is it?
Any help appreciated
Fergus
I have one also that I want to get a new fascia or 'case' for.
This is what I found... http://www.apexlaptops.co.uk/HTCspares.htm
This is what they told me... "We can supply a brand new replacement Qtek 9100 case including, battery cover, aerial cover, keyboard housing, keyboard bezel, display housing, display bezel and slide frame at a total cost of £70 + £10 delivery."
Awfully expensive!
You may P.M. me, I have some XDA Mini S parts left.
The job ist not that difficult, with some basic skills and the wizard service manual it shouldn't cause trouble.
Best regards
gluecky
fergus said:
Does anyone know where i can get a replacement fascia for the qtek 9100/xda mini s? Or if anyone has themselves done the job how difficult is it?
Any help appreciated
Fergus
Click to expand...
Click to collapse
here: http://cnn.cn/shop/m3000-full-housing-p-703.html
The BlackDiamond 3.0 download link is broken i was wondering if anyone can put a link up for me?
Also im looking for some new housing and LCD screen for my Wizard anyone kno where i can find one
Joshv1288 said:
The BlackDiamond 3.0 download link is broken i was wondering if anyone can put a link up for me?
Also im looking for some new housing and LCD screen for my Wizard anyone kno where i can find one
Click to expand...
Click to collapse
----------------
E-Bay. Look for 8125 housing, or HTC wizard housing, or somethin' along those lines.
Of course if it's a G4, you'll need to get the T-Mobile XDA housing (I believe it's the XDA)
You'll see the differences.
LCD Screens and Digitizers are there too!
Cheers
I just got a new housing on ebay. 15 bucks and about 5 shipping, I think. It didn't include a battery cover, but it did have the D pad buttons. Looks new again!
so i thought about replacing the housing on my wing with black house like one found here (http://cnn.cn/shop/tmobile-wing-black-housing-p-4828.html) (ebay has it cheaper) and i was wondering if there is a good guide somewhere to use, or should i make one?
I did the same thing with my wing. I have the black housing with the HTC logo instead of the t-mobile blue. The guides I used to take everything apart are below. One pictorial and one video made for replacing the LCD digitizer but every step is needed to replace the housing. I am not sure if there is a step by step process here on XDA so feel free to start a guide if you wish. Here are the links:
http://www.modd3d.com/articles/item/how-to-replace-the-screen-in-your-t-mobile-wing
http://www.youtube.com/watch?v=aN6cKRM2F1M
-Dan
thanks man, if/ when i do it ill be sure to make a guide. where did you get your housing from?
Your welcome,
I purchased my housing from eBay. The cost was about $20 US cheaper than that link, just as you suspected. Same housing, same rubberized feel you have with the OEM blue housing; it looks very sharp when you have it all put together. Good luck with the guide. Make sure you post up a link when you put it all together.
depending on my pay check i may order the housing this week. i need to get my digital camera back before i can make my guide. you can check out the one i made for the tmobie dash to know what kind of work to expect.
already got one on watch on my ebay
ive been looking into this almost since i bought my wing. had the thing apart several times already, but i cant find a site that sells it with the black face buttons. might look sinda dumb all black w/ blue buttons.
anybody know who's got em?
I purchased one of these as the housing i had was getting very messy
http://cgi.ebay.ie/FULL-HOUSING-KEYBOARD-HTC-TyTN-II-2-P4550-P-KAISER-/180496072719?cmd=ViewItem&pt=PDA_Accessories&hash=item2a0667800f
DONT BUY THIS KIT !!!
The item was listed as new but clearly most of the parts were used.
The biggest problem I had was with the front face plate.
There is a few gold "connectors" that have to be melted in the plastic.
I had to break these out of my old case and used a soldering iron to put them into the new faceplate.
There was also the gold screw holes! these were a real pain.
Again they needed to be broken from the old case and then gently heated with the iron until they melted into their respective hole.
Maybe this is what I should have expected but it would have been nice if they said a little fiddling was required for fitting.
The keyboard was also not as the picture is. It was a chinese keyboard so I just used my own.
All in all it worked out well and my phone looks spanking new but its not really a worthwhile mod given the cost and hastle.
I was also planning to buy that housing but had a second thought about the keyboard. my original keyboard is all black and doesnt have the white numpad.
thanx for the advice ! ill try to inquire from other seller.
how about this one?
http://cgi.ebay.ph/FULL-HOUSING-KEY...ewItem&pt=PDA_Accessories&hash=item20b0bf01ef
A few days ago I received the same housing from the same vendor and is all ok. Mounting screw is settled and the exterior is not damaged.
Before ordering I contacted him and sent a picture of my phone. When he confirmed that everything (including keyboard) is identical, I ordered. I got the body and I get happy.
I think you had bad luck
Maybe its bad luck but eBay rules are pretty straight forward.
I was not sold what was listed in the pictured and it was not new (item had marks from use where case slides apart and also scratching.)
The keyboard was not the one in the picutes. I actually have a full black KB but wanted to go with the white panelled one in the pic.
What I got was a chinese all black KB. Useless to me.
Anyway, i got my phone rebuilt and its looks new and works great. It took a little more fiddling than I would have expected and the KB was wrong.
I left Neutral feedback for the vendor because I felt I got what I needed.
codejack:
sorry to say but it is really a bad luck. lets try to be careful with items like that and inquire every detail of the item we will buy. thanks for sharing pal
pozabi:
thanks for the tip. ill try to send a picture of my unit when i buy a full housing so that everything will be clear to the seller
Manual to disassemble housing
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!
New housing for my hardworking MDA T - Mobile
i buy from ebay seller xellmore_au, nice and comes with tools for the works.
Just follow a video at youtube search " HTC Kaiser (TyTN II) szétszedése "
And my MDA T-Mobile now HTC TyTN II
Cool huh
leonardvr said:
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!
Click to expand...
Click to collapse
http://www.htcdriver.com/uploads/service/tytniikaiser.pdf
i bough the full housing with keyboard from ebay and the keyboard isn't working. not sure why