Database Users

Broken screen Mda Compact

Hi there,
today I accidentally broke the touchscreen of my MDA Compact.
I am now doing an investigation for prices for Screen to repair the damn thing myself and prices for reparation.
It seems that it is very expensive.
Does someone know where to find cheap prices.
Maybe a cheap second handed screen could be found?
If it will be too expensive I will consider bying a S110 or 9090.
Do you agree?
Thanks!

Hello,
Welcome to the the club of people who need spare parts. In your case you might find somebody who sells you an new or used screen, but in all other cases in needing spare parts we are out of luck. It seems that HTC Europe and all most every repair service wount sell spare parts.
I have a friend in Asia who is looking for me if he can get some spare parts for me.
If not, than I have to buy somebodies dead magician and use it for spare parts. Maybe it's something for you in case you can get a new screen for an good price.
Well let me know if you want to sell your dead magician.
Good luck

lost both of my styluses. where can I buy them?

Hi all,
Can somebody tell me where to buy replacement syluses for my Kjam?
Thanks

Go to phone or electronics or computer shop to buy a new one!
Regards,
Arto.

zsizsi said:
Hi all,
Can somebody tell me where to buy replacement syluses for my Kjam?
Thanks
Click to expand...
Click to collapse
expansys sells stylus pack. and I have glue a small piece of sponge on the entry of the hole of the stylus using glue tape, and the stylus is very secure now.
water

thanks. i'll utilize the sponge idea

XDA Mini S > 8125 Conversion

Hey guys,
I really like the look of the Cingular 8125, more so than the Mini S (looks tighter). If i got the housing for it, would it be possible to do a conversion...Or would it be dangerous and potentially end up costing me more than aniticipated to get it right.
Thanks for your help.

Bizigi said:
Hey guys,
I really like the look of the Cingular 8125, more so than the Mini S (looks tighter). If i got the housing for it, would it be possible to do a conversion...Or would it be dangerous and potentially end up costing me more than aniticipated to get it right.
Thanks for your help.
Click to expand...
Click to collapse
It would not be too terribly difficult, but you would need the keypad, and buttons Top/bottom, in addition to the complete housing. Unless you have a great source for plastics, it would cost too much in my opinion...

google "wizard service manual"

buy a bricked 8125 on ebay

Also google "prodigy service manual", I had more lucky with that. You should find that is a 200 series manual. The 8125 has a 100 series body I believe, although I'm not sure about the m/board, etc. Can someone confirm this?
If possible I would compare disassembly pics between the Mini-S and 8125 to see how closely they match.
As moto said, you will have to buy a complete phone; buying a housing won't come with enough parts.

T-mobile Wing Housing ??

Anybody Know Were I Can Get The T-mobile Housing And How Hard Is It To Install The Front Part Any Info Would Be Really Appreciated

I saw a few on ebay that are for the top part and battery cover but none that included the buttons or slide assembly. Which parts do you need and I can see about ordering them from the HTC parts supplier I deal with.

I Need The Front Housing And The Battery Cover And If You Can Get The Slide Assembly Mine Is Kinda Off Let Me Know Prices

Wing housing complete!
odm420 said:
Anybody Know Were I Can Get The T-mobile Housing And How Hard Is It To Install The Front Part Any Info Would Be Really Appreciated
Click to expand...
Click to collapse
Here ya go: http://www.cellulardr.com/products.php?cat=299
Shep

Thanks for the link!

Replacement full casing/housing

I purchased one of these as the housing i had was getting very messy
http://cgi.ebay.ie/FULL-HOUSING-KEYBOARD-HTC-TyTN-II-2-P4550-P-KAISER-/180496072719?cmd=ViewItem&pt=PDA_Accessories&hash=item2a0667800f
DONT BUY THIS KIT !!!
The item was listed as new but clearly most of the parts were used.
The biggest problem I had was with the front face plate.
There is a few gold "connectors" that have to be melted in the plastic.
I had to break these out of my old case and used a soldering iron to put them into the new faceplate.
There was also the gold screw holes! these were a real pain.
Again they needed to be broken from the old case and then gently heated with the iron until they melted into their respective hole.
Maybe this is what I should have expected but it would have been nice if they said a little fiddling was required for fitting.
The keyboard was also not as the picture is. It was a chinese keyboard so I just used my own.
All in all it worked out well and my phone looks spanking new but its not really a worthwhile mod given the cost and hastle.

I was also planning to buy that housing but had a second thought about the keyboard. my original keyboard is all black and doesnt have the white numpad.
thanx for the advice ! ill try to inquire from other seller.
how about this one?
http://cgi.ebay.ph/FULL-HOUSING-KEY...ewItem&pt=PDA_Accessories&hash=item20b0bf01ef

A few days ago I received the same housing from the same vendor and is all ok. Mounting screw is settled and the exterior is not damaged.
Before ordering I contacted him and sent a picture of my phone. When he confirmed that everything (including keyboard) is identical, I ordered. I got the body and I get happy.
I think you had bad luck

Maybe its bad luck but eBay rules are pretty straight forward.
I was not sold what was listed in the pictured and it was not new (item had marks from use where case slides apart and also scratching.)
The keyboard was not the one in the picutes. I actually have a full black KB but wanted to go with the white panelled one in the pic.
What I got was a chinese all black KB. Useless to me.
Anyway, i got my phone rebuilt and its looks new and works great. It took a little more fiddling than I would have expected and the KB was wrong.
I left Neutral feedback for the vendor because I felt I got what I needed.

codejack:
sorry to say but it is really a bad luck. lets try to be careful with items like that and inquire every detail of the item we will buy. thanks for sharing pal
pozabi:
thanks for the tip. ill try to send a picture of my unit when i buy a full housing so that everything will be clear to the seller

Manual to disassemble housing
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!

New housing for my hardworking MDA T - Mobile
i buy from ebay seller xellmore_au, nice and comes with tools for the works.
Just follow a video at youtube search " HTC Kaiser (TyTN II) szétszedése "
And my MDA T-Mobile now HTC TyTN II
Cool huh

leonardvr said:
Dear colleagues,
Can you send to me a link or a manual about it?
I need change the housing and touch screen of my TYTN II and I don´t know how I can do that.
Please, if you can, help me!
Thanks!
Click to expand...
Click to collapse
http://www.htcdriver.com/uploads/service/tytniikaiser.pdf

i bough the full housing with keyboard from ebay and the keyboard isn't working. not sure why