I got what seems to be an dopod 828+ from my brothers girlfriends sister who made a trip around the world. So she bought this phone in Honkong and it worked for some days. On day it just stoped working.
If you plug it on the power supply an press the power button there is an telstra splash screen and than at first:
D 1.12.00 WWE
than it changes to:
R 1.12.00
G 1337.43
D 1.12.00 WWE
than the green and red phone buttons light up for a short time and after that device turns off and you can start again.
One more thing: If i connect the phone to an computer via usb the only thing happens is the red LED at the speaker blinking.
Any ideas what could be the problem. Is there any hope
Related
Hello, please if anyone knows the solution to my problem:
I bought a Tmobile MDA from a person who just flashed it with a Tmobile demo rom v4.21
MDA works normally when on craddle (charger) but when on battery it goes dead after i press power button... So, when I take it off the craddle it works normally on battery (battery is supposed to be brand new) but once turned off, the screen blinks once and MDA is dead.
When I just put it on craddle for a second i can turn it on and it works normally again...even on battery...
He is out of town and will be back on friday. He sais that this is a software problem and will be solved by flashing with XDA developer ROM.
Could that be true? The battery seems to bi OK until I press the power button...
I tried flashing ROM via USB but I get error 011 - execute remote communication program error....
Please help...
Thx in advance
valsimoT
hi. this is very strange to me. The software doesn't cause this problem. my be you look around the connector if the one of the bin is bent or broken. I am not sure but if you think the software problem, go ahead and upgrade the rom.
Thanxs for reply.
but MDA works on battery until it turns off automatically (power save) or if I press power button... When on craddle, power button works normally...
I can make calls and everything on battery but when I turn it off - id goes dead ((
Hello everyone i'm a newbie here
just wanna ask a simple yet disturbing question.
i have a cingular 8125 with ipl 3.08 and spl 3.08 running AMP WM6.1
every time my battery level dropped below 30% my screen started to flicker....but after i charged it to above 45% the flicker disappeared.
anyone had the same prob?
what with external power?
if its ok then get a new battery.
update
updated
nope...after unplugging the cord my screen starts to flicker again although not as much as it was before (on full powered battery)
but the thing is that the screen now has vertical lines all over it. and the phone starts to lag badly.
but everytime i tried to open the keyboard to landscape mode, the screen suddenly fixed and the vertical lines disappeared (maybe the flex is faulty)
tried to soft reset (doesnt work), refasten the flex (nothing happened). even hard reset and still no hope.
i wonder if this is hardware or software issue
anyway my rom is 19.83.2.22 WWE
radio 02.25.11
does uprgrading/downgrading the rom solves this prob?
and yes...even on external power the screen still flicker andhas vertical lines....
hmmm i wonder if its time to move to another device?
rite now i've upgrade to BD 3.1 with IPL 3.08
ROM 11.0.0.1 WWE
but still on today screen the lines and flickers stays.
funny on pgrograms or settings (with bright background) the problem just vanished.
now im confused....is this a hardware prob or ROM?
update again...
after the screen off than on again (using on/off button) the problem continues to haunt me again (
help anyone???
its been flickering and lines all over
sometimes it do and sometimes it dont
help anyone???
its been flickering and lines all over
sometimes it do and sometimes it dont
triple post...sorry
it might not be the battery thats causing your problem.
check the connection of the flat cable connecting to the motherboard of your phone.
mine was flickering with vertical lines across the screen. I checked if it was the cable and it was a little loose.
Let me know if that works out for you
I have a wizard 200, and some days ago, I had some troubles with screen, looked like it was shaking when turning on, then it did not turn on, and the buttons (answer, hang up) got hot.
turn it off a couple of days, and then turned it on again and it started to shut down after 30 secs. so If I keep pressing the power button (in the top of the phone), it can go until windows but if I let the screen on for more than 30 secs it shuts down.
when I charge the phone, the led (suppose to be orange while charging and green charged) gets red, then turns off, then turns orange, then green...and keeps the cycle.
I already tried to pump the battery up (connecting the cables directly from usb). did not work, I tried updating rom with ruu_prodigy_226102_22610105_022511_tmous_wwe_ship and the same keeps happening.
the battery shows full charge, and have tested it with batt tester and looks ok.
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.26.10.2
thanks a lot for your help.
Hello everyone,
Yesterday, I got an Orange SPV M3100 from a friend but I cannot get it to switch on. I can get into the bootloader mode and the information the bootloader gives is:
Code:
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
I have tried a hard reset, it says that the phone has been restored and press SPACE to boot but when pressing space nothing happens - no Orange Logo, no splash screen - absolutely nothing - it doesnt even attempt to boot. The same happens with the power button - no attempt to boot. However in both cases (when I hold the power button down and after a hard reset, the green LED lights up)
At first I thought the battery was dry (since the phone hadnt been used for a few months) but even after charging it for a few hours, no difference. However, I am not sure whether there is a problem when charging it (no LEDs light up when charging - is this normal - i thought an Amber light should come on). However, the phone does have enough charge to stay in the bootloader screen for hours so I think it is charging.
Ive tried searching the board and the wiki but I cannot find anything similar to this (most people have at least the operator logo or windows logo coming on)
I would appreciate any advice as to what is wrong with the phone and whether I can go about fixing it.
Thanks in advance for your help and if you need any more info please do ask.
Chada
About 3 months ago my imates battery died so i bought a new one which worked fine for about 2 weeks. I stopped using it for 2 months after that and ever since i cant get it to charge or open. The red light whist on the charger hardly never comes on and if it does the phone wont even open it just shows the imate blue screen and switches off again.
Reading some other peoples thread with the same problem their solution was trying to charge the battery through its pins without using the phone which i tried doing unsuccessfully.
Today somehow on the charger with no light it switched on and i was able to go to the settings and do a reset which then again turned the phone off and now its back to sometimes switching on the blue screen and then turning off.
If someone could help I would be very grateful
(on the blue screen it says:
IPL 1.00
SPL 2.13.000
GSM 02.20.21
OS 2.13.9.23)
i think ur device is short dude...check with Power supply