Has anyone who owns a titan been able to get sound when they play their gif during bootup. Shaps advanced config has a section for the startup animation options and in this section you can add a wav file during the gif bootup. It doesn't work for me. Anyone else have luck with this. I know the Kasier phone can.Not sure what a kaiser is.
Related
Hi,
I just got a GIF from a friends phone and it seems that it does not work on my MDA Vario...
Anyone knows a App which do work?
Thnx in advance
Anyone?
come on
same here... gifs not working at all... help....
come on, someone must know
WE need some help here!
I found viewing gif's from pictures and videos menu, didn't show the animation, but if you select one to send and play, the animation is shown.
can we change the boot screen to an animated gif somehow?
I've tried some of the cabs on this site and other sites with no luck. I've tried putting animated.gif into the windows folder with no luck.
am I missing something?
i was able to do it
but i forgot how
i think directly in the registry i'm guessing (search for welcomehead)
i'm talking about two secondary splash screens (like in advanced config)
to change the first two splashes i've used the bootsplash kitchen
http://wiki.xda-developers.com/index.php?pagename=TitanBootsplashTutorial
but the .nb image creator doesn't support .gif files as best i can tell
sweet!!! good link gonna try this next weekend!!
too bad it does a hard reset. Gif's are listed as working so they should work (as they are the only ones that 'move'.)
its not supposed to cause a hard reset...
i used the kitchen within the last week and the first time it worked
the last time caused a hard...
i also tried animated gif and it didn't work
only non-animated for the first two....at least using this tool...
never actually seen an animated gif on the first two before...so
(i think the successful bootsplash was by using the sd card instead of the ruu)
make sure you put your (both secondary) splash images in windows directory...
helps with load time...and delay settings...
still not 100% that entering the gif in the registry is working...but i think it will
been resetting my device for a couple hours straight trying to get all the settings right...
i'll post up what results i think i figure out...lol
I used the sd card and it works to change the picture on the first and second images of the boot sequence. But no animation thus far
I've looking ever since I tried one of Ryan's light 6.5 roms. He had an animated lightning strike a tree, and it looked pretty dope!!! I think I might track him down...........
There is a utility in the PPC Kitchen that allows us to add animation to one of the start up screens. I added the Windows Vista logo with a meter below it. Works fine for a couple of seconds till the meter freezes.
whoever is cooking the roms for you must tell it NOT to skip the animation. then you can change the animation.
GeLopez said:
whoever is cooking the roms for you must tell it NOT to skip the animation. then you can change the animation.
Click to expand...
Click to collapse
im not sure if this would help but i think that there was a change icon application, in the options menu i think it said bonus and when i taped it it let me change the boot screen i used the windows phone 7 gif and the windows phone png along with the vista boot sound
hope this helps if i can remember the app i will tell you but it would be better if you searched in the xda engine
Hey, I'm trying to make some bootscreens but I dunno which gif editor to use, both Ulead and Animation Shop Pro give me gif files that dont play properly, they come up as static :S Anyone gimme any pointers?
[I'm trying to make a bootscreen where it shows the HERO with the android boot.gif (and removing the "HTC" animation frames), then the nexus boot1.gif then looping nexus boot2.gif, if anyone can make a boot_animation.xml file, I'd greatly appreciate it]
Regards,
Shen
EDIT: SOLVED, GIMP works brilliantly.
Is it possible to get that boot animation for winmo?
example attached
Yes, you just make the gif and set it as your startup animation using advanced config.
did that. it booted then the screen went blank till it fully booted. does it need to be the exact same resoulution as my topaz? and is there a size limit for the animation. and does anyone know of a good freeware animation program?
wickedninjalo said:
did that. it booted then the screen went blank till it fully booted. does it need to be the exact same resoulution as my topaz? and is there a size limit for the animation. and does anyone know of a good freeware animation program?
Click to expand...
Click to collapse
It should be 480x800 to display properly.
Not sure about exact size perameters but if it is too long it will not play. Sometimes it takes several attemtps to get it right.
what length should i keep it around?
wickedninjalo said:
what length should i keep it around?
Click to expand...
Click to collapse
I don't know exactly but my animation plays about 15-20 slides.
Also, play with the timeouts in AC, I had an issue where mine didn't work after I flashed a new ROM, but I finally got it working again by messing around with the network screen timeout.
ok I got it to somewhat work. it loads my animation but for some reason it flickers like but still plays at a good speed.any ideas?
REQ: Nexus One boot animation
Does anyone have the GIF/video file to share here, I'm not sure where to find it to do my own conversion, ideally not a dodgy YouTube video, looking for quality here!
Many thanks in advance to whoever does share.
middlep1 said:
Does anyone have the GIF/video file to share here, I'm not sure where to find it to do my own conversion, ideally not a dodgy YouTube video, looking for quality here!
Many thanks in advance to whoever does share.
Click to expand...
Click to collapse
Your best bet would be to ask around in the android and nexus one threads
Heres a couple animations I edited into 480*800 a short one and a long one. No matter what I use the screen still flickers on my topaz but the animation looks fine on my computer.
Nexus One
here just rename if you must
Man if you perfect this that would be so tight. I will even donate.
Or like a windows logo breaking like a window and having the linux penguin piss on it. lol
i've searched around the forum and couldnt find anything.
Im using Bsb tweaks to remove the boot animation, but it wont remove that htc sound played when the phone boots. Anyone knows how to stop it from playing in each boot?
there will be a regedit so check the tips thread at the top if not montecristofs(prob spelt wrong lol) hd2 tweak will do what youre asking
Demon_man said:
there will be a regedit so check the tips thread at the top if not montecristofs(prob spelt wrong lol) hd2 tweak will do what youre asking
Click to expand...
Click to collapse
You can use JWMD Icon edit to change the boot sounds and screens, best way is to make a 44k 16bit silent wav file and put it on your phone and use either that proggy or a reg edit to select it ...
but I think the file is in /windows/BootupHTC.wav or something like that , replace it with a silent file, not sure if deleting it might work, but could cause your phone to hang ...
runningdap said:
i've searched around the forum and couldnt find anything.
Im using Bsb tweaks to remove the boot animation, but it wont remove that htc sound played when the phone boots. Anyone knows how to stop it from playing in each boot?
Click to expand...
Click to collapse
This is what I did. Went to HKLM->Software->HTC->HTCAnimation. On StartupWav, I changed values to \Windows\none.wav
thanks for the replies everyone
( i checked enyaj' way first and it worked btw. cheers)
try this post:
http://forum.xda-developers.com/showthread.php?t=625911
there is a cab at bottom of post