Okay, I've been doing a ton of reading, and finally after having issues updating from Open Touch 3.0 to 4.0, I decided to Hard Spl. Everything worked fine, and is running great, but I thought I'd post some things that might help out some noobs (like me) when they decide to mod their phones.
First off, there are two methods to flashing to new roms.
USPL and Hard SPL
Basically your phone has software to keep from being overwritten. In order to flash, you need to bypass this.
USPL, is a software that will temporarily disable this allowing you to flash then. This is the safest way to flash to different roms. Some roms require a hard spl, so it depends on what you are flashing to. Here is a link that has the USPL link to download and how to use it.
http://forum.xda-developers.com/showthread.php?t=377939r
Now, if you want to Hard SPL, you need to know this can brick your phone if not done properly. First, hard spl permanently writes over your phone basically unlocking it. This can be reversed, but there are other threads describing how to do that. You need to make sure your ipl is 4 or higher. If it isn't, you will brick your phone. Check this my holding the camera button down, and press the soft reset button (use the stylus and push it in the small hole on the left side of the phone.) Make sure you hold the camera button down until you get the 3 gradient colored screen. (I think it's red, blue and green). The top will say your ipl number.
First, download this file
http://www.sendspace.com/file/ot8zsn
It will contain 3 files you need to install first in a certain order. Unzip this to your desktop. It will make a folder called hardspl 6.
You need to make sure your phone has an option selected. Go to start\system\usb to pc. Check the box for advanced networking
Next, you want to put your phone in flight mode.
First install canonyang.cab.
(Install by copying that file to your pda through activesync and then just use file explorer to find the file on your pda and double tap that file).
Next install aserpolicy.cab
Finally install disablesecurity.cab.
Then do a soft reset (press the small hole with your stylus on the left side of your phone).
Now, go to the hardspl6 folder on your desktop, and run the romupdateutility.exe file.
It will walk you through the install. At one point, your screen will go white. Leave your phone alone until it reboots itself. Viola! You are hard spliced. Now, you can load whatever rom you wish to.
Hope this helps somebody out there...I was extremely confused at first.
Seems easy enough. I had a Wing, but returned it after I was told I wasn't getting it for the price I was told. There's a big difference in paying $150 for a Wing with a promotional code and paying over $350 or whatever it is. But now I got another one finally and I love it. I've wanted to make it look better since I had the first one, but I always thought it was risky. I didn't wanna risk messing up my phone. Plus I don't know much about it anyway and I never wanted to really bother people and ask. Not that i'm an idiot and I can't understand tutorials others have posted or anything. It's just that the phone is completely new to me and even some words i'm not familiar with. For example, what brick means.. hard spl.. etc. I still do wanna get my wing looking nice though. I definitely wanna get a black/grey theme going.
Bravo!
We commend you for creating this, as it SHOULD decreade the number of noob questions we get.
This should be stickied
I have a general idea of what I want my today screen to look like. These 2 today screens look great and I wouldn't mind having those for mine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dougstoner said:
First, download this file
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Click to expand...
Click to collapse
Doesn't work.
Thanx for the info! Your tutorial is a great help to me!
dougstoner said:
Now, go to the hardspl6 folder on your desktop, and run the romupdateutility.exe file.
It will walk you through the install.
Click to expand...
Click to collapse
Perhaps you can tell me what the romupdateutility.exe does ? Do you point this util to the rom you want to install ? And the util takes care of the installation of that rom ?
And perhaps you can tell me how to get back to the origional htc-rom ?
fzzyrn said:
Bravo!
We commend you for creating this, as it SHOULD decreade the number of noob questions we get.
This should be stickied
Click to expand...
Click to collapse
Just trying to help out some. I know when I started, I asked a lot of noob questions, but you guys were great in answering every one I had. It's just that a lot of the terminology can be confusing.
itslinx said:
For example, what brick means.. hard spl.. etc. I still do wanna get my wing looking nice though. I definitely wanna get a black/grey theme going.
Click to expand...
Click to collapse
Brick means to make your device useless. It's basically where you try to turn your phone on, and nothing happens. (Hence the term brick, because that's all you can use your phone as). This is usually done when you try to hard spl, and it fails. You have to do a lot of reading to make sure you can even hard spl depending on the IPL 4.xxx of your phone. You can find this out by holding the camera button and doing a soft reset (using the stylus and pushing the small hole on the left of the phone) Hold the camera button down till the phone come up in the 3 gradient colors blue, red, and green I think. It will say at the top what IPL number you have. If it's below 4, you can't hard spl or you will brick your phone. Hard spl is basically unlocking your phone so you can install any rom you wish to flash to. It overwrites the software that protects your phone from being written over. That is the dangerous part though. You can use the uspl method, which basically temporarily overwrites your phone, but most roms require the hard spl method. I got some weird errors using the uspl method though.
itslinx said:
I have a general idea of what I want my today screen to look like. These 2 today screens look great and I wouldn't mind having those for mine.
Click to expand...
Click to collapse
The bottom screen shot looks like Open Touch v. 3.0. I think the top one is touch it, but I could be wrong. I have never flashed with touch it yet.
Niwla said:
Thanx for the info! Your tutorial is a great help to me!
Perhaps you can tell me what the romupdateutility.exe does ? Do you point this util to the rom you want to install ? And the util takes care of the installation of that rom ?
And perhaps you can tell me how to get back to the origional htc-rom ?
Click to expand...
Click to collapse
The rom update utility (not trying to sound sarcastic) updates your rom. The rom, (basically the operating system you are trying to flash to). You have to place the .nbh file (the operating file you download) in the ruu folder and it knows you want to update to that rom. It will tell you what rom you have in that folder when you are flashing though so you know you have the correct rom in it.
itslinx said:
Doesn't work.
Click to expand...
Click to collapse
http://www.sendspace.com/file/ot8zsn
You can use this link.
freeze alot
afta i did this my fone alot now i have to restart it all the time but i give it 5 minz and it does it again hav e any ideas why?
any programs i can get to stop it from duin that
dougstoner said:
You need to make sure your ipl is 4 or higher. If it isn't, you will brick your phone.
Click to expand...
Click to collapse
What if my phone was IPL 4<?
Cheers.
the quick answer is a brick the long answer is that u will need to through a long vigourous process of debugging and replacing to get it to work lol
Related
Tom HTC Artemis Rom v2.00.01( Crossbow Style)
Tom Artemis Rom v2.00.01
Aku 3.0.1
Rom 2.00.01WWE ( Thanks pdamobiz.com on base 1.28.0.0 Rom)
Thanks to Maimach for his excellent romediting tools.
Thanks PhamQuang ,Logout from www.pdaviet.net forum
-Add Icon System ( Crossbow)
-Removed PocketMSN
-Add Windows Live Meseger
-Add Windows Live Search
-Add Windows Media Player TodayPlugin (on imate Rom)
-Add BatteryStatusExt V1.04
-Add Sim Manager V5.30
-Add Microsoft Office OneNote Mobile Build 12.0.4518.1010
-Add WM5.0 NewMenu (new icon)
-Add Pocket Notepad v4.0.10 (new icon)
-Add Contacts Backup V 1.6.0.0
-Add Core Player V 1.0.4 build 716
-Add Hibernate V1.40
-Add spShutXP (new icon)
-Add PHM Traylaunch
-Add WM6.0 Remote Desktop
-Add Flash Format v2.68 build 157
-Add Sunnysoft Calling Card V1.0 Build 0701311
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download here :
www.micmeo.com/tom_codon/Artemis/Tom_ART_v2.00.01PDAVIET_CB.zip
Update Rom then install Tom_v2.00.01_ART_patch.cab .
i had been tested successful on my HTC P3300 Unlocked and Lock CID
Tested on 02 Orbit Unlocked,Dopod P800W unlocked cid
Note: Dont flash this rom for Orbit locked.
Great..!
memory left ?
Hi,
Nice job. Can you tell me what is the memory left after fresh install, Rom and Ram ?
Thanks
sdnvxda2 said:
Hi,
Nice job. Can you tell me what is the memory left after fresh install, Rom and Ram ?
Thanks
Click to expand...
Click to collapse
Storage : 34.576mb
Ram : 29.03 mb
Nice1, will give it a go tomorrow. Cheers.
i tried it on mine, everything went ok, but when it opened, the screen stayed white, tho i could hear the 1st sound from inside, ( the ones that make you tap the screen in order to start using your phone etc ). so i had to go back to my old one.
Any suggestions ?
sedde said:
i tried it on mine, everything went ok, but when it opened, the screen stayed white, tho i could hear the 1st sound from inside, ( the ones that make you tap the screen in order to start using your phone etc ). so i had to go back to my old one.
Any suggestions ?
Click to expand...
Click to collapse
I have same problem.
sedde said:
i tried it on mine, everything went ok, but when it opened, the screen stayed white, tho i could hear the 1st sound from inside, ( the ones that make you tap the screen in order to start using your phone etc ). so i had to go back to my old one.
Any suggestions ?
Click to expand...
Click to collapse
Sorry brother ..!I don't understand .What the proplem you had ?
Can you post the pic of this mistake that i can see then can understand what you were talking about. ok?
This file patch crossbow phone .
Screenshots:
Extract this file copy to windows by Resco.And reset.
i tried it
it's good Rom.Verry fast and beautiful
Thanks Mr.Tom
Am I right in guessing that this is not Windows Mobile 6?
I've currently got the MDA Compact 3 and in the wiki there isnt a Rom available for download for the TMobile version.
Does anyone know where I can get it just in case this goes wrong?
Also would I be able to uninstall Messenger Live and any of the other software which is installed in this update?
Thanks.
D.C.
can this rom be flashed to a CID locked Orbit,I did not see any information concerning this?
arvind09 said:
can this rom be flashed to a CID locked Orbit,I did not see any information concerning this?
Click to expand...
Click to collapse
I think this is not possible. For friends with CID-locked device, please be warned and prepared your device's original ROM in case the upgrade fails. Otherwise, you will brick your phone.
Khuanchai said:
I think this is not possible. For friends with CID-locked device, please be warned and prepared your device's original ROM in case the upgrade fails. Otherwise, you will brick your phone.
Click to expand...
Click to collapse
I had an unsucssesfull upgrade of my HTC P3300. I got hang up on start screen and had to put my device into a bootloader and flash test russian rom 1.14.411 back.
can someone tell me how to put this on my orbit please? im new to all this stuff.
Any chance of getting just the WM6 customisation without having to install the whole rom ?
I think that would simplify things for those of us with CID locked Phones.
Tried twice, both times stuck on splash screen. Had to go back to original T-Mobile rom. PLEASE HELP!!
tom_codon said:
Sorry brother ..!I don't understand .What the proplem you had ?
Can you post the pic of this mistake that i can see then can understand what you were talking about. ok?
This file patch crossbow phone .
Screenshots:
Extract this file copy to windows by Resco.And reset.
Click to expand...
Click to collapse
After the installation, i hard - reseted and when it did open up ( after the splash dopod screen ) it stays white but i can hear it working on the background. Got it now ? I cant post a picture since i cant really set my phone up, since i cant get through the starting settings ( eg. time and date etc ).
vo1968 said:
Tried twice, both times stuck on splash screen. Had to go back to original T-Mobile rom. PLEASE HELP!!
Click to expand...
Click to collapse
vo1968,
Can I ask you from where you got the original tmobile rom? I've checked in the wiki and there isnt one available.
Would really appreciate it.
Regards.
D.C
I finally done it. I have same problem, after flashing, there was only white screen and in background I heard introductory sonnet, but screen was still white. So I tried before flashing copy "phcanOverbmp.dll" to Windows folder and then I flash up ROM. After hard reset it works at last. And don't forget install "Tom_v2.00.01_ART_patch.cab" after hard reset.
--------------------------------------------------------------------------
One more thing tom_codon - really good work!
cosinusx said:
I finally done it. I have same problem, after flashing, there was only white screen and in background I heard introductory sonnet, but screen was still white. So I tried before flashing copy "phcanOverbmp.dll" to Windows folder and then I flash up ROM. After hard reset it works at last. And don't forget install "Tom_v2.00.01_ART_patch.cab" after hard reset.
--------------------------------------------------------------------------
One more thing tom_codon - really good work!
Click to expand...
Click to collapse
i did what you told, i replaced the file, i then hard reseted it, but the white screen still persists, can you describe it step by step ?
sedde said:
i did what you told, i replaced the file, i then hard reseted it, but the white screen still persists, can you describe it step by step ?
Click to expand...
Click to collapse
1) I had original HTC ROM 1.12.405.01 026790 WWE SHIP and I copied
"phcanOverbmp.dll" to Windows folder (replace existing file).
2) I deactivated radio module on Artemis, disabled internet connection and
firewall on notebook and started "UpgradeRom_Artemis.bat".
3) After aprox. 15 minutes it finished without errors.
4) I did hard reset, after bootsplash the boot logo went up, but freezed.
5) I did hard reset again and it worked perfect for me.
6) After succesful booting, I have installed "Tom_v2.00.01_ART_patch.cab" yet.
Ok, first off, I just want to let EVERYONE know that I'm VERY new to the WM6 platform, having purchased a T-Mobile Wing, just recently. The phone was locked when I got it, but I used a sim-unlock service to unlock it. I've been working on Motorola phones for years now, so I'm not a total stranger to flashing, too. I've already successfully changed my slider tones and added a NES emulator to my Wing(which was all pretty basic, really), but now I'd like to start flashing some ROMS, particularly Touch-IT. My question: By flashing a new ROM to the phone, will it RE-lock the phone?
http://forum.xda-developers.com/showthread.php?t=383536
not trying to be an a**hole but kinda look around or search b4 posting
For a matter a fact, I DID do some searching b4 posting, and didn't run across the post you have so graciously pointed me to until after I had already posted a new thread. Sorry to have inconvenienced you, but I'd rather not mess my phone up, as I'm VERY new to the platform, as stated before.
Newbe also
Hey guy here's a few threads i ran across yesterday that were very helpful. unlike you it was shaky at first during everything but i did it. and cant wait to do more and learn more, and hopefully start writing my own if someone wouldnt mind helping me please....ill donate a few bucks to what ever for the held but here's the info:
TylerC161 said:
EDITS: 10/18/07 ADDED Wing OS's. In FAQ's Pt.2
Newbies Guide to Herald
Disclaimer: Please read ALL instructions listed for any item BEFORE actually following them. Make sure you have a good idea of what you're doing, and what you're supposed to be looking for. Im not responsible for any harm you may cause to your device following my steps. Anything I post here HAS worked on my Tmobile Wing and been tested.
Also, I have released a zip of everything needed to install a Touch IT OS. Check this thread here
I want to install a program, but dont know how to use .cab's
Its really easy.
1. Connect your computer to your device via USB
2. Explore your phones memory, and copy a downloaded .cab from the internet to your phone
3. RUN the .cab from your phone through the File Explorer
4. Whatever setup it is, it should complete, and it will delete the .cab afterwards to save space.
I want to backup my device:
Active Sync will back up your contacts, calendar, emails, notes, files and program data.
In addition, you can use PIMBackup for your Call Logs, Messages, Speed Dials, etc. and either Spb Backup or Sprite Backup for a full system backup (i.e. you won't have to reinstall all your apps as long as you restore to the same ROM you backed up from).
What are the different reset functions?
Soft reset - hit small circular reset button by volume slider(on wing) or bottom of phone (on Herald)
Hard reset - Press and hold both softkeys and press the soft reset button, continue to hold the softkeys til a prompt is brought up asking if you're sure you want to format. Press the call button to comfirm.
Enter bootloader - Press and hold the camera key, then press the soft reset button. Hold the camera button until the bootloader menu shows it. You will see 3 different gradient colors.
How Do I Install With NBH Method
View this video here: http://www.gigasize.com/get.php?d=khbzp03s07f
I want to install touchflo, but I need more instructions:
Here are my steps I used to install touchflo:
1. Download which version of Touch IT you want. For the Last version made, here is the link: http://forum.xda-developers.com/showthread.php?t=340403
2. Backup any information you wouldn't want to lose. Either backup to memory card or PC; your choice
3. At this point, You need to install the official RUU for your device, if you're already running the official RUU, then you need to hard reset your device. (Press and hold both soft keys and press reset button, continue to hold softkeys til screen displays to hard reset. Press the call button to continue). If you need to install the official RUU, continue to step 3a4Here is a list of uploaded RUUs
3a. Enter bootloader on your phone (Hold camera button and press reset, continue holding camera until a screen with 3 gradient colors shows up
3b. Connect your computer via USB to your ppc (Pocket PC)
3c. Run the RUU .exe from your hard drive, follow its simple onscreen instructions and click check boxes necessary to continue with the installation. This should take a few minutes, and you will more then likely see your screen flash and change things, this is normal, let it work. After a few minutes it will boot up and go into "automatic customization of your device", I continued this (screen alignment, tips, auto setup), and waited for my device to be totally ready for me to use.
4. Connect your device via USB to the PC and wait for activesync. If it automatically pulls up a profile for your phones sync, delete that profile. If it asks again to setup device for syncing items, click cancel. You will still be able to explore your phone and install devices without setting up the sync profile for your phone.
5. Make sure your phone is connected as a guest, if it is not, make sure it is. The method I used to do this was this zip file I ran "guest only" registration entry. (Make sure and run allow partnership registration after completing installation), but it should display as guest after the hard reset.
6. Copy aserg policies.cab to your mobile device
7. Run aserg policies.cab from your device
8. Soft reset (use stylus for button on side of wing, or on bottom of herald)
9. Go into your comm manager on your phone, and disable "phone". Basically enter flight mode so nothing can be sent to your phone during this process.
10. Once booted, its time to give it a shot. Make sure you're still connected as guest, and run !Upgrade_rom.bat from Touch_it folder on your PC
11. This will bring up a command prompt waiting for you to hit a key to begin, press any key
12. During this time it is installing, NEVER touch your phone or play with it in any matter. It may look as though the command prompt has gotten hung up at times, but leave it run until it completes (or fails). your phone will pop up a message saying "unknown status" or the likes, but dont close that window, like I said just leave it alone.
13. If you have no error messages in the command dialogue box then you're ready to hard reset your phone. (press both softkeys, and press reset, continue holding softkeys til you see a dialogue asking if its okay to restore settings, hit the call button to finish it)
14. Your device SHOULD boot normally, go through setup, and you should be golden.
If at any time there is an error during install, but you still let it complete, you might have a chance at it working. Hard reset it after completion (even with errors) just to see if it works. If it wont go past your Tmobile or HTC picture screen on bootup, then you have bricked your device. To UNbrick it, run steps 3a through 3c and reinstall the RUU.
If you get any errors, try and try again. Its proven working on several devices.
How do you enable the cube?
Start > Programs > TouchFlo > TF Settings
Here you can change how it operates, or turn it off.
Here are the ways to activate it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This image is not from the TouchIT but tom codons Black&Blue for the Artemis
I want to sync my outlook contacts, but activesync doesnt work!
I have found a workaround for this.
1. set up a windows live account (if you havnt already)
2. at the windows live homepage, import your contacts from outlook to your Live account
3. set up email via your Wing, on step 4 it will allow you to sync with Hotmail and Live
4. contacts should sync
This is a "quick fix" to the real problem not being able to sync. Using this method will store them all on your SIM, and make it Lastname, Firstname (annoying to me)
Changing the HTC home plugin clock colors
select your color:
HTC Home Clock Aqua Glow Thread
HTC Home Clock Eblue Glow Thread
HTC Home Clock Matrix Glow Thread
HTC Home Clock Purple Glow Thread
HTC Home Clock Red Glow Thread
HTC Home Clock Yellow Glow
For me, all I did was copy and paste these files to my windows directory and soft reset. It worked after that! Matrix FTW!
I enjoyed this guide and it helped me solve my problem/questions I had. Is there a place to donate?
I would be happy to accept donations
All donations can be sent via paypal to: [email protected]
Click to expand...
Click to collapse
So, you were COMPLETELY stock and went straight to TouchFlo? BTW, thank you for the info!
Goodmorning...
yes i was stock, now i have the touchflo 2.3 with 6mb pool and over clocked 250 mhz and a few registry edits. i want to upgrade to the 4.4 version that they have out but not in no rush.....
Ok. Now I'm kind of confused. I've gotten to step 6, but when I unRAR the ASerg Policies, there are 2 files found within: _setup.xml and POLICIES.000. I move those files onto my Wing and them view them via my file explorer, within the phone. They look exactly like that, 2 files, not a .cab. So, I'm not sure WHAT I'm doing wrong here, but I'm doing something. Anyone?
are you sure theyre not a cab?
the .000 files are usually in cbs oh and the _setup.xml too.
you might want to save instead of opening when you download it
The ASerg Policies were in the TouchIT v2.3 folder, RAR'd. When I UnRAR them, all they are is the 2 files. Like I said, I know I'm doing something noobishly wrong, I'm just not sure what it is, LOL!!!
Monday bump!!!
Stop using tyler's kit ... its almost a year old... and outdated, as well as an outdated method of flashing.
HAHAHA!!! Holy noob!!! Soooooooo, Instead of UnRARing the ASerg Policies Archive, I just drug it onto the phone and the .cab worked! LOL! Brilliant. I'm going through the process, right now, to see if I can get TF to install, without bricking my Wing. Thanks for all of the help!!!
So far, so good! TF is up and running!!! For some reason, the cube feature doesn't seem to work, though. Any reason for this?
Anyone have problems using activesync? This is my third ROM install, each ROM being from a different developer... and activesync is still doing the same exact things to every single one.
To put a new ROM on I have to put the original T-mobile ROM back on, where activesync does work, then I repeat the new ROM install process. Still activesync refuses to work.
The grey circle turns green and when I click on activesync... It says connecting but eventually it will come up with the error and I can either press ok or troubleshoot. Basically the short error says no mobile device found.
Any help is appreciated thanks.
The420Dank said:
Anyone have problems using activesync? This is my third ROM install, each ROM being from a different developer... and activesync is still doing the same exact things to every single one.
To put a new ROM on I have to put the original T-mobile ROM back on, where activesync does work, then I repeat the new ROM install process. Still activesync refuses to work.
The grey circle turns green and when I click on activesync... It says connecting but eventually it will come up with the error and I can either press ok or troubleshoot. Basically the short error says no mobile device found.
Any help is appreciated thanks.
Click to expand...
Click to collapse
Reinstalling AS4.5 took care of my problems. It didn't work to repair the program. I uninstalled and did a clean reinstall....no problem now.
INTRO
Click to expand...
Click to collapse
Welcome to my LEON Kitchen...
This Thread is meant for Kitchen discussion only! (ex.: Problems with cooking, Possible fixes and/or Updates for the kitchen, etc.)
You are tired of not finding a ROM that meets your needs (graphics, applications, mod, etc ...) Well this is the thread for you.
Now possible you developer your customization ROM, I'll give you the tools and much more...You can also add other packages to your liking.
To download the Kitchen just making a small donation for my work and the time I dedicated...MOD EDIT : Link Removed
After the donation you will be redirect to a site web where you can download the LEON Kitchen, after the download send me a PM with the number of donation, and I'll send you the password to unzip the file .rar
INFO
Click to expand...
Click to collapse
The Kitchen is based on the latest LEON v2.0 WWE with more Graphics, Applications, Tools and other...
O.S.: WM 6.5 From last OFFICIAL TMOUS v2.13
XIP: 21892 From last OFFICIAL TMOUS v2.13
SYS: 21892 From last OFFICIAL TMOUS v2.13
OEMDRIVERS: From last OFFICIAL TMOUS v2.13
Language Base: WWE (0409)
2 Radio Included: v2.10.50.08.2 and v2.10.50.26 (it's support 576MB RAM)
Example How to Cook a ROM
Click to expand...
Click to collapse
Step 1: Extract the Kitchen
Extract file "[KITCHEN] - LEON_WWE_2.1.rar" in "c:\"
Step 2: Starting up
Once you've extracted the file, you can start the kitchen by launching "osKitchen.exe"
Click on the button "Open Project" and select the type of ROM you want to use as a Base. You can choose between LEON WWE and LEON LITE WWE Once you have loaded up your kitchen, you have the same setup I used for the release of my LEON ROMS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 3: Customization
Once you've loaded a stock ROM, you can customize it to your own needs. You can exclude packages, add new packages, or edit some of the app.reg files to tweak it even more.
Keep in mind however that some packages are required for some core functions of the ROM and/or HTC Sense. (Ex: OEMBASE)
Step 4: Build the ROM and Flash
Once you're ready, just go ahead and press the "Start Cooking" button, this will take a while so go take a walk or something...
When the process is finish you will get a file called "ruu_signed_0409.nbh" in the folder "Flash"
This file is your ROM, it's built and now ready to be flash, this can be done in 2 ways:
- via PC: you can flash it by running "ROMUpdateUtility.exe"
- via Storage Card: rename the file from "ruu_signed_0409.nbh" to "LEOIMG.nbh" and copy it to your device to flash it from the Bootloader.
reserved2...
reserved3...
reserved4...
Hi at All,
The Thread is started
Hi shark, greats kitchen
this is my confirmation number: 6WU75087XU915601R
hi have 2 little question
1. how i can cook inside the nbh file, radio rom?
2. can you create kitchen in italian version?
thanks
snake650 said:
Hi shark, greats kitchen
this is my confirmation number: 6WU75087XU915601R
hi have 2 little question
1. how i can cook inside the nbh file, radio rom?
2. can you create kitchen in italian version?
thanks
Click to expand...
Click to collapse
Hi Man and Thanks for your Support.
In TAB Tweaks on the Kitchen, press button "Selection" in "Radio cook-in" and then browse to "C:\[KITCHEN] - LEON_WWE_2.1\Sources\Other\Radio" and choose one of the RADIO ROM included...
If you want save the project.
I don't know if i will release Italian Kitchen....
shark147 said:
Hi Man and Thanks for your Support.
In TAB Tweaks on the Kitchen, press button "Selection" in "Radio cook-in" and then browse to "C:\[KITCHEN] - LEON_WWE_2.1\Sources\Other\Radio" and choose one of the RADIO ROM included...
If you want save the project.
I don't know if i will release Italian Kitchen....
Click to expand...
Click to collapse
Thanks for your answer
another question, i have try cook a rom with HDWall patch, but don't work
can you help me?
snake650 said:
Thanks for your answer
another question, i have try cook a rom with HDWall patch, but don't work
can you help me?
Click to expand...
Click to collapse
Hi Sir,
If you want use HDWall Patch, you Uncheck Package "HTCSense BG4AllTab" because both package select is incompatible...
Hello shark147
are you still providing this application ?
thank you
Hi,
Thank you for the kitchen. I am downloading the same now. I have been using your ROM for about a week now and very much satisifed. Just when thought of donation, this occasion came thru. Please find the confirmation number below and send me the password. I have also mailed you regarding the same.
Confirmation No.: 8VK63983RF7945705
dheerajk27 said:
Hi,
Thank you for the kitchen. I am downloading the same now. I have been using your ROM for about a week now and very much satisifed. Just when thought of donation, this occasion came thru. Please find the confirmation number below and send me the password. I have also mailed you regarding the same.
Confirmation No.: 8VK63983RF7945705
Click to expand...
Click to collapse
Hi Sir,
I have send you PM and e-mail
Mahirsoft said:
Hello shark147
are you still providing this application ?
thank you
Click to expand...
Click to collapse
Sorry Sir,
I don't understand, my english is no good
shark147 said:
Hi Sir,
If you want use HDWall Patch, you Uncheck Package "HTCSense BG4AllTab" because both package select is incompatible...
Click to expand...
Click to collapse
THANKS SHARK
it's now perfect my personal rom...
sense language files
Thanks for your kitchen. The only thing I am missing are the sense language files. Could you include them in your next kitchen so that I can change my sense interface in dutch.
Hi,
I gave multiple tries to cook a rom, but no avail. Though, this is the first time I am trying to cook a rom for HD2, I had cooked many times for my previous devices. Cooking gets completed smoothly and even the flashing is successful, but after flashing when the device gets booted, the home screen would just not load. I can do everything else like invoking start menu or dial or whatever, but when I click on Home, the last application screen remains, and home will not load. Looks like a problem with HTC Sense? I will detail what I actully did below.
What I was trying to do was, removing three of the packages from the kitchen. So, after loading LEON_WWE.fe project, I unchecked the following EXT packages:-
1) YouTube_2_6.....
2) Opera_Browser_9_70...
3) GoogleMaps_4_1_0_....
That's it. Now when I go ahead with cooking, everything goes smooth and the process gets completed. Now, after that, I do a Task29 and flash the new cooked rom. Everything is smooth till that point except that, as I mentioned above, the home screen would not load. Please note that other than the above 3 changes, I didn't do anything else, before clicking the button "Start cooking". I tried multiple times, but couldn't solve the issue. After flashing, even I tried a hardreset, but that didn't help either.
Kindly advise. Sorry, if the post is a bit lengthy. I thought, I would explain everything.
Regards,
dheerajk27 said:
Hi,
I gave multiple tries to cook a rom, but no avail. Though, this is the first time I am trying to cook a rom for HD2, I had cooked many times for my previous devices. Cooking gets completed smoothly and even the flashing is successful, but after flashing when the device gets booted, the home screen would just not load. I can do everything else like invoking start menu or dial or whatever, but when I click on Home, the last application screen remains, and home will not load. Looks like a problem with HTC Sense? I will detail what I actully did below.
What I was trying to do was, removing three of the packages from the kitchen. So, after loading LEON_WWE.fe project, I unchecked the following EXT packages:-
1) YouTube_2_6.....
2) Opera_Browser_9_70...
3) GoogleMaps_4_1_0_....
That's it. Now when I go ahead with cooking, everything goes smooth and the process gets completed. Now, after that, I do a Task29 and flash the new cooked rom. Everything is smooth till that point except that, as I mentioned above, the home screen would not load. Please note that other than the above 3 changes, I didn't do anything else, before clicking the button "Start cooking". I tried multiple times, but couldn't solve the issue. After flashing, even I tried a hardreset, but that didn't help either.
Kindly advise. Sorry, if the post is a bit lengthy. I thought, I would explain everything.
Regards,
Click to expand...
Click to collapse
Hi Sir,
Can you tell me in "05 - HTCSense_2_5_20121412_1_ENGINE" package you have select and in "07 - HTCSense_2_5_X_TWEAKS"
else you check in "Start"==>"Settings"==>"Today" if HTCSense is select...
the 3 package you have removed don't affect the initiation of HTCSense...
herlek said:
Thanks for your kitchen. The only thing I am missing are the sense language files. Could you include them in your next kitchen so that I can change my sense interface in dutch.
Click to expand...
Click to collapse
Hi Sir,
I will try include language DE for next version
shark147 said:
Hi Sir,
Can you tell me in "05 - HTCSense_2_5_20121412_1_ENGINE" package you have select and in "07 - HTCSense_2_5_X_TWEAKS"
else you check in "Start"==>"Settings"==>"Today" if HTCSense is select...
the 3 package you have removed don't affect the initiation of HTCSense...
Click to expand...
Click to collapse
Yes, it's all selected. Though, under "05 - HTCSense_2_5_20121412_1_ENGINE", four eReader related options are unchecked (which was by default). And in "07 - HTCSense_2_5_X_TWEAKS", everything is selected except "HTCSense_Remove_eReader_Stock" and "HTCSense_Change_LSK_CallHistory".
And HTCSense is selected under "Start"==>"Settings"==>"Today".
It's not that Homescreen showing empty, like when we try to uncheck the option under Today settings ("Start"==>"Settings"==>"Today"). Even the homescreen backgroud is not visible there and the screen stays with whichever last application I had opened. For example, after flashing normally the "Connection Setup" screen comes. So, when I click on the Done button there, the "Connection Setup" doesn't go away, it just stays there. After that when I click on Start, the start menu comes without any failure. But, now when I click on Home button, nothing happens, and start menu stays there. It's as if it is stuck at there, but all the applications runs, after that.
dheerajk27 said:
Yes, it's all selected. Though, under "05 - HTCSense_2_5_20121412_1_ENGINE", four eReader related options are unchecked (which was by default). And in "07 - HTCSense_2_5_X_TWEAKS", everything is selected except "HTCSense_Remove_eReader_Stock" and "HTCSense_Change_LSK_CallHistory".
And HTCSense is selected under "Start"==>"Settings"==>"Today".
It's not that Homescreen showing empty, like when we try to uncheck the option under Today settings ("Start"==>"Settings"==>"Today"). Even the homescreen backgroud is not visible there and the screen stays with whichever last application I had opened. For example, after flashing normally the "Connection Setup" screen comes. So, when I click on the Done button there, the "Connection Setup" doesn't go away, it just stays there. After that when I click on Start, the start menu comes without any failure. But, now when I click on Home button, nothing happens, and start menu stays there. It's as if it is stuck at there, but all the applications runs, after that.
Click to expand...
Click to collapse
The Options set it's ok...
I have create for you a Template LEON_WWE without
GoogleMaps
Youtube
Opera 9.70
overwrite project file, try to cook without touching anything...
i'm wait for your feedback
@EDIT:
I try now to cook the same rom wich you want, and i see on my HD2 if work...
@EDIT1:
Hi Sir,
I have try now to cook the rom with the same template i have post you, and after Connection Setup settings, HTCSense interface start well....
ok so i have had the hd2 for a week or 2 now..been kinda bad tbh...allot of random reboots on streaming, msn wont sign in, sometimes it just freezes and have to soft reboot it..so now ive hard resetted it and i would like to have a small and helpful explanation on what rom i should get (your opinion) and why, I only want to use msn and internet most of the time and music...so i dont need something where i can uber mod my phone..my current phone looked like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i read that roms are kinda like the OS of a pc, the thing that makes it all work and run...i dont see what could be so different but there are wayy to many roms to choose from that i kinda lost sight in whats good and whats not for me... so if any1 could help me on my way id be very thankfull!
Personally i would do the following:
1) Get the latest stock rom for your provider from htc.
2) flash it.
3) Hit the tips and tweaks thread and the performance tweaks thread.
3a) Install all applicable tweaks (note: there are some that must not be applied to 1.66 and above roms. You'll also need a copy of phm's registry editor)
4) Install the new MS marketplace app, then update the facebook appliction and then install office 2010 (would be an idea to use wifi for this).
5) Install chainfire's 3D driver and configure (set the fastest settings)
6) Install netripper's LCS. Disable autoscalling, enable 998mhz clock and set to change at startup. This is not overclocking the phone just forcing it to run at the fastest defualt clock even when it is not under heavy load
7) Install hspl, hspl2 or hspl1024 (which ever is applicable)
8) Install radio version 2.10.50.19_2 to improve wifi and battery life
9) Turn of your phone, pull the SD card, stick it in a card reader and back it up. Then format it into fat32 with 16KB or 32KB allocation unit size. Copy all the data back and put it in your phone
Oh one last thing. Find a backup util that will take a backup of the registry, text messages, contacts etc and run it. I use PHM to back up my registry and Pimbackup to do everything else
i totally do not know what all that stuff is LOL i dont know ho o edit registery..i tried to understand but its pretty hard >_> i dont use facebook nor word so dont need those rly
''Install all applicable tweaks '' (where what who)
sorry for being a dumbass but its kinda hard when you go from a samsung e900 to a fully configurable phone haha
lunaticz0r said:
i totally do not know what all that stuff is LOL i dont know ho o edit registery..i tried to understand but its pretty hard >_> i dont use facebook nor word so dont need those rly
''Install all applicable tweaks '' (where what who)
sorry for being a dumbass but its kinda hard when you go from a samsung e900 to a fully configurable phone haha
Click to expand...
Click to collapse
ehm, you're the epitome of what is usually called "n00b"
Here you have a forum literally filled with information, there are tons of sticky threads with tutorials and guides, so you may want to go here first:
http://forum.xda-developers.com/forumdisplay.php?f=534
and read the first threads.
You will have to read anyway, either our replies or those tutorials, so better read the tutorials
lunaticz0r said:
i totally do not know what all that stuff is LOL i dont know ho o edit registery..i tried to understand but its pretty hard >_> i dont use facebook nor word so dont need those rly
''Install all applicable tweaks '' (where what who)
sorry for being a dumbass but its kinda hard when you go from a samsung e900 to a fully configurable phone haha
Click to expand...
Click to collapse
I'm a patient guy, really i am, but i honestly thought that i made it clear that that proceedure is what i would do if it was my phone. I posted it because it has made my phone quicker, easier to use and more stable in all areas.
The tweaks threads are http://forum.xda-developers.com/showthread.php?t=583638 and http://forum.xda-developers.com/showthread.php?t=629388. Sit and read them from post 1 to the very last. Any issues, ask there but tbh it's not difficult. Getting out of bed in the morning is harder. Just approach it after a coffee of two and "switched on"
Chainfire's 3d driver is available here --> http://forum.xda-developers.com/showthread.php?t=592663 (don't download the benchmark package)
Netripper's LCS is here --> http://forum.xda-developers.com/showthread.php?t=682663
PHM can be found here --> http://www.freewareppc.com/utilities/phmregistryeditor.shtml
Pimbackup --> http://www.dotfred.net/
HSPL info here --> http://forum.xda-developers.com/showthread.php?t=611433
Right, if you are a smart guy you'll already know that google is your best friend in forum land and if you want to learn you have to want to do things for yourself. So i'm not going to baby you but instead leave you to it unless you really are stuck. I've posted quite alot of information in those links on various things. Most of them are sticky threads.
I had a string of nokia's before i got my first XDA orbit (HTC Artemis) and tbh i found it alot like using my pc and that's how i treat all the WM devices that i've had. It's not really a phone more a PDA with a phone module. Thinking of your HD2 like this may help you
thx imma read the stuff
already found the driver thing and put it too 8ms or something so thats done, i flashed my phone(got the msg ''we hacked it '') and ill instal that ''radio'' later when i have everything on my phone on my pc so i wont lose it all =) ill go and download that netstripper and nhm things and see what they do thx
if you flash the radio with customruu there is a version that will not wipe your phone when it's complete
but i dont know what versions of radios etc to get lol im still checking out on how to do this reg stuff...lol
i installed that hspl thingy a long time ago(well..3days or so) but never installed a ''radio'' so if i flash something...does this change the rom too? like if i have lets say the standard everything HTC phone has of my provider and i flash it..will this change anything to the updates etc of the rom or is flashing simply put ''cracking the key to be able to mod everything'' ?
offtopic : does any1 know if there is a mediaplayer for the htc that supports .VOB? i downloaded the pacific but its all vob files..and croeplayer i think doesnt work for vob
edit 2: ok installed the cpu thing overlcoked it to the 1st green one and the edit reg thing i think is not needed because i already have bsb and cht and i read that most of the regedit is IN bsb yay! im starting to understand now haha only the radio is remaining but i think i will pass on that one
If you flash the radio using customruu it will flash just the radio rom. I did post the best radio version so far a little earlier (there are two newer versions but they seem to suck the battery and by all acounts the wifi signal is worse). I find 2.10.50.19 is the best, as do many others.
If you flash the latest stock from your provider it may or may not include an updated radio. One thing it probably will do is update the boot loader with a locked one. So you will probably need to reinstall hspl. You need hspl to install custom radio and WM roms
M3PH said:
If you flash the radio using customruu it will flash just the radio rom. I did post the best radio version so far a little earlier (there are two newer versions but they seem to suck the battery and by all acounts the wifi signal is worse). I find 2.10.50.19 is the best, as do many others.
If you flash the latest stock from your provider it may or may not include an updated radio. One thing it probably will do is update the boot loader with a locked one. So you will probably need to reinstall hspl. You need hspl to install custom radio and WM roms
Click to expand...
Click to collapse
hmm ok..well i have the stock rom i think..but i have yet to hard reset it all together, so i still have hspl and rom version : 1.66.404.1 (76641) NLD
thats what my phone says so i guess i have a old ro
radio version : 2.06.51.07 i guess i have a old one..ill download the rom you linked and instal that..hope it will not delete my phone stuff...
downloading from http://forum.xda-developers.com/showthread.php?t=669042
when i open that the program says all information on my phone will be lost
....:S argg my head hurts >_> school+sport+this is not working lol
this is where you need to get customruu from. http://forum.xda-developers.com/showthread.php?t=575524&highlight=customruu+task+32 the only thing that has changed in it is the command that is run at the end of the flash process. it's otherwise exactly the same as the "normal" version. Therefore you get all the warnings that it's going to wipe your phone.
Also please edit your last post and sort out that image. it's a bit of a mess.
LOL my phone just crashed and had to hard reset
sometimes i hate wm so much lol
me too. WM is crap!
indeed...errors keep comming up everywherree ffs
again..wow...im rly regretting this item wtf..it randomly resetted TWICE and the HTC screen stays on for about a min wwttfff
FCK FCK FCVK FCKKK MIXROCRAP AND THEIR CRAPPY WM WTFF
i just fcking installed coreplayer and i had to softreset..did that and BOOM phones dead wont start up .get the battary out put it in...it asks me to re-instal everything WTF
M3PH said:
Personally i would do the following:
1) Get the latest stock rom for your provider from htc.
2) flash it.
3) Hit the tips and tweaks thread and the performance tweaks thread.
3a) Install all applicable tweaks (note: there are some that must not be applied to 1.66 and above roms. You'll also need a copy of phm's registry editor)
4) Install the new MS marketplace app, then update the facebook appliction and then install office 2010 (would be an idea to use wifi for this).
5) Install chainfire's 3D driver and configure (set the fastest settings)
6) Install netripper's LCS. Disable autoscalling, enable 998mhz clock and set to change at startup. This is not overclocking the phone just forcing it to run at the fastest defualt clock even when it is not under heavy load
7) Install hspl, hspl2 or hspl1024 (which ever is applicable)
8) Install radio version 2.10.50.19_2 to improve wifi and battery life
9) Turn of your phone, pull the SD card, stick it in a card reader and back it up. Then format it into fat32 with 16KB or 32KB allocation unit size. Copy all the data back and put it in your phone
Oh one last thing. Find a backup util that will take a backup of the registry, text messages, contacts etc and run it. I use PHM to back up my registry and Pimbackup to do everything else
Click to expand...
Click to collapse
thanks dude..i installed the radio version you said and now i cannot open or instal anything -.-
It was a recommendation not an instruction. I'm not responsible in anyway for any damage a particular piece of software may have done to your device but i am surprised by this. The radio rom should have no impact on your ability to install or run programs so i'm guessing you did something wrong but if the radio is the cuase you can obtain an older version radio and flash that instead.
sorry im a bit annoyed not want to make you responsible i know..just i have been trying to get my hd2 to work for 3days now and it KEEPS just randomly re-installing/crashing :/
[TMOUS][KITCHEN+ROMs][WWE]WM6.5 21892 & 24634 "Just Another T-Mobile HD2 ROMs"
"Just Another T-Mobile HD2 ROM v1"
Works with T-Mobile USA HD2's but T-Mobile junk removed.
Includes Kitchen
I used osKitchen Zero v1.32Alpha7 and dumped the 2.13 OEM ROM myself so I got exactly what I wanted to start with.
I've created a Bunch of Packages myself, again, to get what I wanted. A few of the packages I've only modified to get them to work the way I want. The Folder Icon's are my work.
I tried to keep it similar to OEM, but changed a few things to make it mine.
I am ill, so I will not always be available to answer questions, but I will do my best. I do this to keep my mind on other things while I deal with my illness, be patient with me if you can. I am doing this in my spare time, so don't expect miracles.
Before Flashing, PLEASE backup your Data, and make sure you have Hard SPL 3 on your Phone.
Use This Tool from 'doloop' to complete a Task 29 on your phone. This will Format the ROM Space and clear any previous ROM code from your phone so you get a Clean Flash and less chance of errors on the new ROM. Simply connect your phone to your PC with the USB. Unzip the attachment and run the Exe file inside. When the Flashing reaches 95%, PRESS and HOLD the Volume Down button until it reboots and enters bootloader mode. Now you are ready to flash this ROM.
I will post the Self Extracting Kitchen, an RUU_Signed_0409.nbh, and an AutoFlash file.
What is AutoFlash you ask? I've taken the RUU file, added the Flashing Program, and Packaged it all up into an Auto Executing Auto Flashing Program, and, it's a smaller download than the RUU alone. Pretty cool huh? Yes, others have already done this, but I'm going to make it a standard practice from now on.
"AutoFlash (tm), Making Flashing Socially Acceptable, One Package at a Time!"
Run the AutoFlash file, or Flash using the Standard Flashing Program included in the Kitchen.
ROM Descriptions:
6.5 21892 with Start Menu at TOP
6.5 24634 with Start Menu at Bottom
(Similar to Description Below except for the following changes. RAM FREE 290MB ish, STORAGE FREE 630MB ish. Compressed with LZX. Also, instead of Task Manager, it has Ameba. I modified it to work as follows: Tap Bottom Right to Close programs. Tap/Hold bottom Right for Task Manager. Tap Bottom Left for Start Menu. Tap/Hold bottom Left for Memory Screen.)
Uncompressed
RAM FREE 302MB
STORAGE FREE 436.41MB
Added:
Facebook Tab (Must Enable in Tools Menu, Tap Twice) - By: meltwater
----http://forum.xda-developers.com/showthread.php?t=651007
HTC Wi-Fi Sharing - Hot spot
TripYzee Game
Skyfire
Connection Setup 3_1_20111826_00 With updated DB
HD2 Task Manager (Top Right X to Close)
PHM Regedit
PIM Backup 2.8
Soft Reset with My Red Icon
Total Commander 2.51
Enabled Solitare
Enabled Bubble Breaker
Removed:
Block Buster
Barns and Noble
Ferrari GT
Guitar Hero
Millionaire
Mobi TV
T-Mobile My Account
Mobile Backup
Prince of Persia
Slacker Radio
Teeter
Tetris
Tele Nav
Visual Voicemail
Old YouTube
Old Google Maps
Tweaked:
Keyboard Enhancement (Accuracy and Touch Response) - By: boogiecornejo
----http://forum.xda-developers.com/showthread.php?t=742445
Two Way Call Recording - By: 4pda.ru member RekGRpth
----http://forum.xda-developers.com/showthread.php?t=765555
Start Camera from Call Button (WP7'ish, Tap Green Call button Twice to start Camere, even if phone is OFF) - By: MilaCzeque
----http://forum.xda-developers.com/showthread.php?t=772961
Camera/Video Quality Tweaks
Personal Start Menu and Folder Icons
Personalized Home Tabs
Brought back Original Control Panel & Personal Settings
Stopped Deb Logger
Updated:
Latest Google Maps (Voice Searching)
Latest Bing (Voice Searching / FREE Voice Navigation)
Latest YouTube
I kept Opera 9.7 instead of updating to 10 for its Awesome Zooming, and Image Icon Tabs
Download Below: Files are in multiple parts to fit within MediaFire's Guidelines.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
21892
Self Extracting RUU File Download all three parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Kitchen Download all Five parts and then Run the EXE to extract Kitchen. When you run the program, you can open the saved ROM in this Forum. It's called 'SuperSport Perfect'. BTW, that name was for my own knowledge as it was the one that worked perfectly. I know it's not really perfect.
24634 Possible Dialer Issue I will TRY to fix soon
Self Extracting RUU File Download two parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Kitchen Download all Five parts and then Run the EXE to extract Kitchen. When you run the program, you can open the saved ROM in this Forum. It's called '24634 Test'.
23569 Possible Dialer Issue I will TRY to fix soon This has Threaded Email (Conversation View)
Self Extracting RUU File Download two parts. Run the EXE file to extract the RUU.
AutoFlash File Download Two Parts and Run the EXE File to Automatically Flash the ROM. (This is the EASIEST way to Flash!)
Saved for Future Use
Saved for Future Use
is this rom working? i used HSPL and i got it to 2.80 or something HSPL .... i installed rom and everything got stuck on Stick together screen :/ then had to get it back to stock rom.... what should i do?
Dantia said:
is this rom working? i used HSPL and i got it to 2.80 or something HSPL .... i installed rom and everything got stuck on Stick together screen :/ then had to get it back to stock rom.... what should i do?
Click to expand...
Click to collapse
I've flashed it around 30 times now during testing, and so far, it's fine for me.
You should see 'SPL-2.08.HSPL' on the Boot Loader Screen. Also, keep in mind this ROM is for the T-Mobile USA HD2. I am not sure if it runs on the International versions.
If you have that, then you should use the Task29 file in the first post. Remember to hold down the Volume Down button around 95% and keep holding it till the phone reboots into bootloader again. Then flash the ROM.
I have not flashed from the uploaded files yet as I'm still trying to get them all uploaded. MediaFire was having trouble last night, so possibly a file got corrupted? I'll be testing them shortly. Files are now Confirmed Working.
95%? you mean when screen Shows the Big HTC and then percentage below it? then i should use those buttons?
Dantia said:
95%? you mean when screen Shows the Big HTC and then percentage below it? then i should use those buttons?
Click to expand...
Click to collapse
When you are flashing the TASK29 file. When it reaches 95% Completion, hold the Volume Down button until it Reboots into BootLoader Screen. (Red, Green, Blue Screen) When flashing Task29, NOT when flashing the ROM.
After rebooting into BootLoader, it should be ready to flash the ROM.
Has anybody else flashed this yet? Any additonal input so I know if I have a corrupt upload?
EDIT: I'm downloading it now and test flashing it to verify.
EDIT: See post #8 below
No i mean cause i got a big Black Screen and in middle of it says HTC Big Fonts... below it loading crap... 95% and then i press them on that screen till i get 3 color one? hmm think i got it tell me if it works ... doing a raid in World of Warcraft atm
Confirmed Working
I just downloaded the Self Extracting RUU file and flashed it. It worked fine. Keep in mind that the First Boot took 1 1/2 minutes to finish. Be patient...
I just downloaded the AutoFlash file and flashed it. It worked fine.
I just downloaded the Kitchen, and it extracted fine.
All seem to be working fine. Please let me know if you get different results.
you know the first time u use the tool u have a put a link in here? it goes to 95% almost instantly i use Volume down and Red buton.... nothing happens and now i am again stuck on Stick together
Dantia said:
you know the first time u use the tool u have a put a link in here? it goes to 95% almost instantly i use Volume down and Red buton.... nothing happens and now i am again stuck on Stick together
Click to expand...
Click to collapse
When using the Task29 tool, it will go to 95% almost instantly. That is normal. ONLY hold the VOLUME DOWN button at 95% and continue to hold it until the phone reboots into BootLoader. THEN flash the actual ROM.
It sounds like you sucessfully flashed Task29. If you are still on the Stick Together screen, open the back of your phone and hold down the Volume Down Button while pressing the Reset Button. This will put you into BootLoader mode so you can flash the ROM.
When you flash the actual ROM, it will take a few minutes, like other ROMs.
do i have to do that aswell with Autoflesh?
Dantia said:
do i have to do that aswell with Autoflesh?
Click to expand...
Click to collapse
No. Holding down the Volume Down button is only for the Task29 step. Flashing the ROM is like normally done with other ROMs.
If you want to try the AutoFlash version, just download the files. Connect your phone to your PC via USB. Run the AutoFlash file and follow the directions.
Ok,i got it working yeeeeeeeeeh! but aswell Windows Live not working aswell youtube program since i dont have my country but i will remove it somehow and replace with older or newer version.... other works very good thanks.... Cheers had some problems during installin first few times but now it's just great cheers!... if u have solutions for this youtube and windows live since i cant set up my mail and i am a bussinesman )) woulkd be good
Dantia said:
Ok,i got it working yeeeeeeeeeh! but aswell Windows Live not working aswell youtube program since i dont have my country but i will remove it somehow and replace with older or newer version.... other works very good thanks.... Cheers had some problems during installin first few times but now it's just great cheers!... if u have solutions for this youtube and windows live since i cant set up my mail and i am a bussinesman )) woulkd be good
Click to expand...
Click to collapse
Good to hear it's working.
Are you able to run those programs on Other ROMs?
ah well i didnt have this version of yoitube either windows live.... but ye worked fine back there....both of them.... it could be just the program it self...not rom... tell me if u find solution... sorry for mistakes atm from phone
aswell its ur rom that is first.i fleshed..... so i dont know about.other.roms
Polish language exist in this rom?
downloading now
You gonna make a 23x version?
So do you maybe got a link to download the Youtube and Windows Live Application from T-Mobile Stock Rom? Cause that's the two of apps i most use,other then that everything works fine...
Here they are. (Live is attached below)
You Tube v2.6 - http://www.megaupload.com/?d=4CFRB1QC