Related
Anybody knows how to unlock the T-Mobile XDA with this radio stack. I have downgraded by ROM to 3.17 but the XDAUnlock still wouldn't work. I get Error Getting Unlock Code. Based on what I see it does not seem to be a good idea to downgrade the RSU. If I do downgrade I can't find how to upgrade the RSU back to the current version.
1. Any help?
2. Will the XDAUnlock be modified to support this radio stack?
I agree with you it's not safe to flash the RSU, but if it's the only way then you will have to do it ... or it's better to get the lock key from your operator.
I downgraded the RSU...
Worked!
I tried unlocking the phone...
Worked!
Now I see no signal.... Do I have to upgrade the RSU again?
If so how can I do that?
thanks in advance for your help!!!
Upgraded Radio from uspocketpcphone.com and it worked!!!!!
HI. if you are trying to upgrade the radio stack, make sure that the radio stack is built for what kind of WM OS. For example, if you downgrade or upgrade the radio stack that you with Tmoble, make sure that the radio stack must support you Tmobile OS. I have tried may times and found out that AT And T just suits for AT&T rom, Tmobile, just for Tmobile rom, O2 must for O2 Rom. There is no way that you can swap one radio stack to another rom.
Again, I don't have radio stack 6.25 but I have radio stack 6.24 for Tmoble. I will upload if you need it.
Again, if you don't mind, can upload the radio stack 3.17 for me. thanks.
Please download here:
You were right!!!
I wish I could have read your post earlier.
I upgraded the radio on my own phone (i was working on my friends phone yesterday). Then there was no signal.
I tried downgrading to 3.17 (on yorch.net) and it froze and now my phone is dead. it restarted but it shows no radio version and no signal.
any ideas???
Diki said:
You were right!!!
I wish I could have read your post earlier.
I upgraded the radio on my own phone (i was working on my friends phone yesterday). Then there was no signal.
I tried downgrading to 3.17 (on yorch.net) and it froze and now my phone is dead. it restarted but it shows no radio version and no signal.
any ideas???
Click to expand...
Click to collapse
nice try, you killed your phone!
R I P
Ok, so I've searched the forum and couldn't find anything one way or the other.
I'm probably gonna get flamed for this, but its not for lack of trying to search
2 things
1) I've upgraded to VP3G's WM6 ROM (3.0) and Hard SPL 2.10 Olipro what do I need to do to make sure I don't get my warranty voided
2) If I need to change the ROM (I'm not so concerned about the SPL, I work for att and my RAE said they just clear and repackage as a referb as the SPL is really only visible in bootloader i doubt they'd notice) can I just reflash the WM5 Att rom availible from HTC or are there extra steps. If there are extra steps (Mr.Vanx guide seems to be what I'm looking for, but there was some conflicting info) can I just do a straight flash using the "Official" ATT WM6 rom?
Basically I'm looking for the easiest way to get this thing ready for return
Can I just flash the WM5 ATT ROM or the ATT WM6 ROM, I would like to do the WM5 if I can just flash it straight across.
Also is there a way to check date of manufacture?
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
and
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
Ok as I thought, this is gonna be fun.
Also my radio version is 1.48, as per the guide, is this gonna give me problems?
There are 2 notes on the WM5 Downgrade guide, one that says this will not dwngrade the radio version then the other about 1.48, do I perform the WM5 downgrade as per the guide or are there extra steps?
also, which SPL should I downgrade to 1.04 or 1.06? Do I just match the stock Wm5 ROM's SPL?
Hello! I want to upgrade my Qtek 9100 with the latest ROM version. I have the official Qtek ROM 2.17.7.2 WWE, IPL/SPL 2.17, Radio 02.07.10 and AKU 2.0. Where can I find the latest official Qtek ROM?
How does the IPL/SPL influence 9100's performance or stability? I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version? Can I damage the Qtek?
And the most important thing: I want the latest official AKU installed on my Qtek. Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
One more question: Is the radio version a good one? Is there a better version? Can this be installed separately?
I think that is best for PDA that AKU, IPL/SPL and radio to be installed with ROM, not separately. Is that true?
Thank you very much!
Look at you men!!!
are you insane?
Jajajaj read men!
but as I am very good person I will tell you where you need to read ok?
First!!!!
Where can I find the latest official Qtek ROM?
Click to expand...
Click to collapse
So i think you were found the 3.08 is good but is not recomended yet.... ok.
Second!!!!
How does the IPL/SPL influence 9100's performance or stability?
Click to expand...
Click to collapse
It don't influence in nothing my men! nothing... why... because AKU (Actualization Kit Update) was just for wm5 ok? its like you wanna see if XP SP3 works well with your new Windows Vista Ultimate edition...
But you need to read the tutorial first to know how to downgrade first to1.01 then unlock, then upgrade to 2.XX not 3.08 ok?, then to a new WM6.1 rom ok...
Third!!!!
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
Ok you found the 3.08... yes you can but is more important ask... what chipset do you have? G3 or G4? please provide us with this info first... i saw you have 2.12. bal bla bla so is a G3 but confirm cause some people said I have IPL SPL 2.17 and NOT they have 2.17.0001 (G4) and they has a bricked phone... so the only way to upgrade or change the IPL or SPL is flashing an Original ROM maded by your carrier and for your chipset ok? well... so the answer for this question is NO men!
Fourth!!!!
Can I damage the Qtek?
Click to expand...
Click to collapse
Yes the IPL and SPL changing system is the problem for all thats why people bricks their phones so please dont use it cause it wont lets you perform speed or something ok? AKU's was History Now! the world of WinMobile rules the 6.1 with .Net compact 3.5
Fifth!!!!
Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
Click to expand...
Click to collapse
No is not the most impoprtant question is the same but all in one hahahaha
No you cant upgrade separately... aku is history so dont try to upgrade stay in Aku 2.XX after your unlock process ofcourse and read a lot men you need to read a lot!
Oh sorry i forget something... you have the last the 3.08 AKU 3 (3.08)
The AKU2 comes with A2DP stereo sound bluetooth via Headsets
The AKU3 comes with A2DP and Direct Push tecnologies... so... they never works in WM6 or 6.1 why? cause it already have it by default....
Hope it answers all your question and please men I cant tell you where to go if goes to G3 tutorial for unlock or G4 hardSPL cause you dont have read to fill your signature with your info so...
Be cool men and Good luck we are here to support!!!!
No, I haven't found 3.08 ROM. It's only IPL/SPL 3.08. I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM? Thanks!
So...
So... what do you mean with this...
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
The IPL and SPL cant be found separately men!
where is the one you found post the link please...
I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM?
Click to expand...
Click to collapse
Men!!!
With the Original ROM T-mobile 2.26 you will have the 2.26 IPL and SPL...
And with the Original ROM T-mobile 3.08 you will have the 3.08 IPL and SPL...
This components arent separately.... Never!
It diffiers from Qtek in many things like... some apps... Splash screens.... Configurations... and many little things.
Here all recomends to Use the T-mobile Rom 2.26 to Upgrade after the unlock process cause is the best Original BASE rom ( is the same but is highly recomended that after unlocks the CID and SIM use the IPL and SPL 2.26)
I have found the 3.08 IPL/SPL in the unlocking thread...I'l give you the link latter because I am in a hurry.
If I want to flash the T-mobile 2.26 over Qtek's 2.17, I have to go back to 1.05 ROM and CID unlock, or I have to install the 2.26 over 2.17?
How about with battery life in T-Mobile 2.26 when using wireless and bluetooth? When using only GSM, the battery drains fast?
Thank you very much!
I think here...
Here is your link... so
http://forum.xda-developers.com/showthread.php?t=311027
Whatever...
You are on qteks original 2.17 is it truth?
So... first of all downgrade to 1.05 (you dont need to upgrade to SPL 2.26)and do the unlocking process, if everything is ok...
second... upgrade to 2.26... then your favorite Coocked Rom by whoever you want ok?
third... everytime you want to upgrade or change your rom is highly recomended to flash first an Original ROM qtek 2.17... Tmobile 2.26 or 3.08 then your new Rom coocked ok?
You can change for every Original to Custom and viceversa now, and you dont need to downgrade again to 1.XX again cause its unlocked forever.
Hope it respeonds your doubts... The issue on many ROMs for this kind of things dont be the same on Original ROMS (I didn see issues on originals, well maybe the speed and performance), and many chefs recomends Three steps to upgrade if you experiments this batt drain issue:
1.-Before the NEW rom, Downgrade to any original
2.-Be sure your Batt is FULL I mean (100%)
3.-Let your device synchronize fully when it starts after an upgrade ( I mean dont unplug at the end of upgrade procedure)
Ohhhhhhhhhhhhh
God damn ****!!!!!
Men wait a minute you are G4!!!!!!!!!!!!!
You dont need to do this unlocking proces ok?
it will be brick your device
Your device is G4!!!!!!!!!!
You need to go to G4 forum and perform the HardSPL Patch ask there....
Well my prays was listening hahahahaha
Because you write your info on your signature we avoid to brick your device
forget all this ****n thread and start again asking on G4 forum please god damn!!!!!!!!!!!!!!
I have a G3 device and I have CID unlocked my phone before, when I upgraded from Button 1.5.4.2 to Qtek 2.17 (I have followed the steps in the upgrading "manual" from here http://forum.xda-developers.com/showthread.php?t=285435). So, I think I don't need to go back to 1.05, unlock and then install 2.26. All I have to do is simply to upgrade T-Mobile 2.26 over Qtek 2.17 with RUU utility.
Now, I don't know how T-mobile 2.26 will influence my phone's settings regarding that I live in Romania and I am a Cosmote mobile network user, not T-Mobile. I have seen on a web site that you can not connect to Wi-Fi hot-spot if the hot-spot isn't from T-Mobile. Is T-Mobile ROM 2.26 restricting the phone's settings and the choice to freely connect to wireless hotspot or Cosmote GPRS and MMS, Orange EDGE and MMS. Can I add new SMS, MMS or GPRS/EDGE settings? Or they force you to use their settings and data connections?
Thank you very much!
So xtrange
The IPL and SPL you have on your signature are for a G4.
No it is recognized by the SIM Card... i mean the sms and cellphone conections but mms gprs and other things yes... you need the configurations separately...
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Andrei__1 said:
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Click to expand...
Click to collapse
IPL/SPL: 2.17.0000
These are G3 Bootloaders,if it was 2.17.0001,then it wud have been a G4,therefore,your device is a G3 phone.nothing to worry about.
Now,you can flash any official roms to it as all the officiall roms like Qtek,t-mobile Cingular or O2 are basically the same roms provided by the Microsoft,they have the same Base Roms,but just all the vendors add up their own stuff to it.Like Splash screens,programs/applications and network/gprs settings.Apart from these ,there is no major difference in any Official rom from all the vendors.
Yes! Bootloaders(IPL/SPL)/Radio Roms can be flashed separately or within by a Rom flash.
Downgrading to IPL/SPL 1.xx is only needed if you want to CID unlock the phone for upgrading to any wm6 or wm6.1 rom,as no official wm6 rom is provided by any vendor.So its only possible to upgrade to wm6 or 6.1 latest rom through custom build roms and for that its required to get the phone CID unlocked
After getting the phone CID unlocked,its prefered to upgrade to T-mobile 2.26 coz its a proven stable base rom,but you can also upgrade to IPL/SPL 2.xx,required for upgrading to wm6 by flashing any other official Aku (Adaptation Kit Update) 2.xx rom.
Upgrading to IPL/SPL 3.08 will just give you a slightly better boot up timings,which is hardly noticeable and nothing else,so if you are at 2.xx,its more preferred.IPL/SPL 3.08 sometimes creates problems afterwards if you have to downgrade.
Its also not necessary to reflash back to official ro each time before flashing a new rom,but only recommended,to clear the Extended_Rom corruption and have a clean base,I have never reflashed any official rom before flashing any new rom,but then thats me!
Thanks men!!!
Im getting worried but... why does the Bootloader Shows the four zeros... on my device it never shows the zeros.
In 2.17.0000
I think he use the WST isnt it? not seing the bootloaders...
I have finally installed T-Mobile 3.08. It has interesting features, but I don't like the dialing pad and that when I start Internet Explorer, the phone asks if I want to connect to T-Mobile GPRS. I'm 60% with the Qtek 2.27 and 40% with T-Mobile 3.08. I'll wait to see the battery life compared with Qtek ROM and the power consumption when using wireless. I'll make a decision in weekend.
Oh, forgot to ask about WM6. Will the phone be faster or slower? What are the main differences from WM5? Is there an official WM6 ROM?
Thank you very much!
It seems that qtek's wi-fi is connecting continously, without establishing a connection. It show "connecting" all the time.
Today I have installed Qtek 2.17 ROM. I like it more than T-Mobile 3.08.
1.33.2010 vs 1.76.2007
3.22.20.17 vs 6.35.x.x
Ok, so what is the difference, other than they are required for certain ROMs?
What phones actually came with these 'new' versions; I have a new device, wouldn't it make sense that it had the new radio, it didn't?
Why would I want to upgrade and are there incompatibilities with providers (mine is 850/1900 freq)
Didn't see this described anywhere or in the wiki.
I'd be glad to tack it in for others information if we get some good information...
Thx!
Correct me if I am wrong. I believe the new SPL and Radio came into being when the new 1.5 Rom with Sense was released for the 32A Rogers phones. It does not use the "normal" 32A recovery but a version of the Hero recovery.
Will newer official Roms use this SPL and Radio combination? I have a sneaky feeling that it will be used again when the Rogers phones are upgraded to 2.1.
In the meantime, some chefs of the custom 32A Roms have decided to create a version of their Roms using these newer SPL and Radio. Some have not (it seems Amon RA won't for his Donut Rom). Hence, if you want to switch Roms you may have to follow CurseDroid's instructions to change SPL, Radio, and recovery.
Note: Some Rogers users believe that it is the new Radio that tells Rogers whether they have updated their phone to fix the E911 bug.
Hmmmm, I have a new Rogers Magic and it didn't come with the sense UI.
I also thought the Rogers update (maybe it was the OTA one) was still the old SPL, although a perfected version.
I also read a comment that said something to the likes of:
The new radio and SPL makes the 32A a Hero (or like)...
Does that mean it can run a Hero ROM?
Any clarification would be appreciated, will add all this to a summary...
Radio comparison
Hmmm are there any speed improvements or differences and reception differences between the 6.35x and 3.22x radios? If no, then what are the differences?
Will someone plz respond to this thread?!??
My phone came with new radio and spl when I bought it.
I switched to the old one to use Yoshi rom some time ago but now I'm back to the new one.
I didn't notice any difference between old and new in the phone speed or battery life, but the reception seems a little better on the new one.
Sent from my Dream/Sapphire using XDA App
Ever since the phone was new, no one can give an answere for what radio is better.
The only thing I have ever had is slightly better reception.
I rooted. My phone Mar 2010. The main reason people went to the old radio is because. Back then it had a more stable kernal / camera / wifi / Bluetooth. And more rom's were being cooked for it
Now if you have a 32a it does not really matter
svpb.ca
There are more custom rom for the new radio.
ad86 said:
There are more custom rom for the new radio.
Click to expand...
Click to collapse
I am not sure about that - I am aware of CM7, DietGB and Ginger Yoshi. But they all use the same kernels by carz12
I was just wondering if anyone in Australia has tested this new ROM on their HD2 device as I'm interested in experiences people are having with it. I got a response back from HTC that says the included versions are as follows:-
OS Version:
5.2.21869
Manila Version:
2.5.20121431.1
ROM Version:
1.72.841.0
Radio Version:
2.07.51.22.2
Protocol Version:
15.32.50.070
HTC claim that it improves SMS messenging and improves the overall touch responsiveness and software lag on the device. Can anyone confirm as I'd like to know before I make the effort to upgrade/reinstall everything. I'm also hoping phone reception and bluetooth audio has been improved in the Radio version upgrade included in this ROM.
Non related advice
brado23 said:
I was just wondering if anyone in Australia has tested this new ROM on their HD2 device as I'm interested in experiences people are having with it. I got a response back from HTC that says the included versions are as follows:-
OS Version:
5.2.21869
Manila Version:
2.5.20121431.1
ROM Version:
1.72.841.0
Radio Version:
2.07.51.22.2
Protocol Version:
15.32.50.070
HTC claim that it improves SMS messenging and improves the overall touch responsiveness and software lag on the device. Can anyone confirm as I'd like to know before I make the effort to upgrade/reinstall everything. I'm also hoping phone reception and bluetooth audio has been improved in the Radio version upgrade included in this ROM.
Click to expand...
Click to collapse
Can't really comment on this as it did not stay on my HD2 long enough for me to find out. I can however tell you that you cannot flash HSPL from this rom. It sets your SPL to 1.66 which HSPL2 cannot seem to deal with. I had to downgrade to the older rom version and then run HSPL1.
Why do want all that terrible telstra bloat? I can tell you your phone will run much faster without it.
I don't want all the Telstra bloat, I hate it. I was encouraged when I saw the message from HTC that all carrier customisations would be removed after upgrading the ROM
If I don't go with this HTC ROM, what custom ROM do you recommend? I assume Energy?
BlueAnt1958 said:
It sets your SPL to 1.66 which HSPL2 cannot seem to deal with. I had to downgrade to the older rom version and then run HSPL1.
Click to expand...
Click to collapse
just to correct you slightly, HSPL2 wont work on any telstra, nothing to do with the spl version, it is the telstra model ID that fails hspl2.
You are correct about HSPL needing 1.42.0000 to install though.
Personal Choice
brado23 said:
I don't want all the Telstra bloat, I hate it. I was encouraged when I saw the message from HTC that all carrier customisations would be removed after upgrading the ROM
If I don't go with this HTC ROM, what custom ROM do you recommend? I assume Energy?
Click to expand...
Click to collapse
I like Energy but there are quite a few other roms out there. ROMs are such a personal choice. What works best for me may not be to your taste. Try a few and see how you go, Most of the chefs in here have been around for quite a while and are very experienced in cooking so you really can't go wrong. Just don't forget to HSPL your phone first and read the ROM threads regarding which radio rom will work best with their ROM.
samsamuel said:
just to correct you slightly, HSPL2 wont work on any telstra, nothing to do with the spl version, it is the telstra model ID that fails hspl2.
You are correct about HSPL needing 1.42.0000 to install though.
Click to expand...
Click to collapse
Ahhhh, thanks for the correction and enlightenment. I had a feeling it had something to do with the model ID as that is the error message I got when trying HSPL2. Sneaky Telstra bastards....
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
BillTheCat said:
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
Click to expand...
Click to collapse
if you plan on flashing cooked roms, but want to try the 1.66 update before hand, you can install HSPL first, and then when you run the .exe shipped rom (over USB), it will only change the rom and the radio, leaving HSPL installed.
BillTheCat said:
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
Click to expand...
Click to collapse
Thank you very much for the info! I got the telstra model. Unfortunately, I had upgraded the ROM officially to SPL1.66. And now I cannot use either HSPL or HSPL2 to flash the device!
Can you please tell me how to revert the SPL to a older version that I can use HSPL?? Thank you very much!!!!
samsamuel said:
if you plan on flashing cooked roms, but want to try the 1.66 update before hand, you can install HSPL first, and then when you run the .exe shipped rom (over USB), it will only change the rom and the radio, leaving HSPL installed.
Click to expand...
Click to collapse
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
-----------------------------------------------------------------------------------
I just realized that I could use the SPL revert procedure to revert the SPL
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
All I need now its theolder Telstra ship ROM with SPL 1.42. I went to htc/australia wedsite, And they only have the new ROM available for download. Is there a place to download the older ship ROM?? Thank a lot!
Fallback to older rom
yiqing said:
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
Click to expand...
Click to collapse
This is easy, you just need to flash the older Telstra rom version that uses SPL 1.42.0000. The rom you are looking for is 1.49.841.1 and I think you can download it from HTCPedia. Just ensure it is the Telstra version. Flashing this will ovewrite your current 1.66 SPL back to the correct 1.42 SPL. When you have done this you can use HSPL version 1 and it will work. I know because I did it myself a few days ago
Correct. There is a telstra 1.49 (1.48?) rom floating about, several people have used it to downgrade. Start searching!
Feeling kind
yiqing said:
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
-----------------------------------------------------------------------------------
I just realized that I could use the SPL revert procedure to revert the SPL
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
All I need now its theolder Telstra ship ROM with SPL 1.42. I went to htc/australia wedsite, And they only have the new ROM available for download. Is there a place to download the older ship ROM?? Thank a lot!
Click to expand...
Click to collapse
To save you searching here is the link. You will need an account to download it. easy to do and free.
http://htcpedia.com/forum/showthread.php?t=1474
BlueAnt1958 said:
This is easy, you just need to flash the older Telstra rom version that uses SPL 1.42.0000. The rom you are looking for is 1.49.841.1 and I think you can download it from HTCPedia. Just ensure it is the Telstra version. Flashing this will ovewrite your current 1.66 SPL back to the correct 1.42 SPL. When you have done this you can use HSPL version 1 and it will work. I know because I did it myself a few days ago
Click to expand...
Click to collapse
Thanks a lot Buddy!!
Appreciape your (Blueant and Samsamuel) help! ^_^ I had downloaded this ROM and installed back to my device. Its pretty straight forward, just like a normal ROM upgrade! Thanks for your help again and I am start "Flashing EVerything" now!
I am also from Australia and I am having the exact same problem. My phone was purchased through Telstra and is locked to Telstra.
I have the 1.49.841.1 ROM installed and I cant flash to a HSPL/HSPL2 because I cant put any of the required ROMS on my phone:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Click to expand...
Click to collapse
I cant unlock my phone with MaUpgradeUt_noID.exe or anything else.
I am running out of ideas. If i try and install:
RUU_Leo_TMO_UK_1.43.110.0_Radio_Signed_15.25.50.07U_2.04.50.20_3_Ship
I get an error "Error 294 - Invalid Vender ID". So i google for some answers and i get:
pocketnow.com/tweaks-hacks/htc-hd2-custom-roms-waiting-hardspl
and
forum.xda-developers.com/showthread.php?t=252704
Some how I can't get a correct software to unlock my phone so i can install a compatible ROM.
Anyone got any ideas?
thanks.. HEAPPSSS BLUE ANT..
THANKS.. I GOOGED THE ROM BUT I COULD NOT FIND IT.. UNTIL I FOUND THIS POST OF YOURS WITHT HE htc pedia link..
cheers
I am having the same problem. Telstra branded device, downgraded to SPL 1.42 and still cannot HSPL. Critical Error, Bad Model ID. ARGGGGG!!
bretto69 said:
I am having the same problem. Telstra branded device, downgraded to SPL 1.42 and still cannot HSPL. Critical Error, Bad Model ID. ARGGGGG!!
Click to expand...
Click to collapse
hspl or hspl2? hspl2 doesnt work no matter what version spl you have. Use the first hspl.
try flashing RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe and then the original HSPL and then a new ROM...
linky - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html under the 1.48 folder
Telstra HD 2 not locked
Wilo300zx said:
I am also from Australia and I am having the exact same problem. My phone was purchased through Telstra and is locked to Telstra.
I have the 1.49.841.1 ROM installed and I cant flash to a HSPL/HSPL2 because I cant put any of the required ROMS on my phone:
I cant unlock my phone with MaUpgradeUt_noID.exe or anything else.
I am running out of ideas. If i try and install:
RUU_Leo_TMO_UK_1.43.110.0_Radio_Signed_15.25.50.07U_2.04.50.20_3_Ship
I get an error "Error 294 - Invalid Vender ID". So i google for some answers and i get:
pocketnow.com/tweaks-hacks/htc-hd2-custom-roms-waiting-hardspl
and
forum.xda-developers.com/showthread.php?t=252704
Some how I can't get a correct software to unlock my phone so i can install a compatible ROM.
Anyone got any ideas?
Click to expand...
Click to collapse
I was also told my HD2 was locked to Telstra but it was not, (I don't believe any of them are now) I can send you the rom I used if you like? HSPL2 won't work as has been said before but HSPL does.
Another option I used while trying to get the right rom/HSPL working was to use SSPL, this worked great but does not allow you to change the radio, and until you can do that there are a few roms you cant use as they don't get on with the Telstra radio.
ps. I had a lot of similar error messages along the way...
I Got it, works perfect, I used the latest T-Mobile Rom from the U.S. on my T9193 Telstra, and its beautiful..thanks everyone for all the very helpful info, I could'nt have done it without you guys and keep up the good work..