I have a sprint ppc 6700
I flashed it to the new wm6.1
FANTASTIC
one problem. I can not send my contacts TO the ppc6700 from my sanyo phone any longer.
Stock rom was I searched on the sanyo picked the PPC send item contacts all ready set go. Done.
I do the same now and I get NOTHING on the PPC side and the sanyo says Connection Failed Device Not Found.
I can browse shared folders and stuff. I can Pair them I just can not send contacts.
I tried sending my contacts to my palm zodiac (success) and from the zodiac to the PPC wm6.1 NO joy same thing. No responce from PPC failure on the palm.
Suggestions? is there a way to fix this.? I flashed back to stock rom. Works fine. Flashed back to wm6.1 No joy again.
Thanks!
This worked for me
Someone suggested to go to
Menu > Settings > select "Connections" tab > Beam > Check "Receive all incoming beams" > Get a cold drink.
I hope this is the fix.
You sir rock! IT WORKS !!!
I have no idea why a "beam" (Infrared) setting would do this but I do not care it works
I can now receive contacts from other phones! Yippee !!
One new problem now. I can not "send" contacts. It now works. I can send a contact the other phone accepts the connection but then "rejects" the contact saying "invalid data"
I am assuming the "way" the PPC stores the data is incompatible with regular cell phones. I am guessing when I get an incoming one it "converts" as needed but its not back converting when it sends. I will test with my second PPC at home (I am guessing that will work fine)
is there a work around for this? ie a program I can install maybe to beam contacts one or all etc.. that will use the proper format the normal cell phones can accept?
Thanks SO MUCH for finding this utterly simple but never would have figured out in a million years fix for me
I really appreciate it especially that you found this thread from so long ago and replied with the fix for me.
Thank again!
where did you find the 6.1? I have looked all over the place for a ROM for the apache...
nerys71 said:
I have a sprint ppc 6700
I flashed it to the new wm6.1
FANTASTIC
one problem. I can not send my contacts TO the ppc6700 from my sanyo phone any longer.
Stock rom was I searched on the sanyo picked the PPC send item contacts all ready set go. Done.
I do the same now and I get NOTHING on the PPC side and the sanyo says Connection Failed Device Not Found.
I can browse shared folders and stuff. I can Pair them I just can not send contacts.
I tried sending my contacts to my palm zodiac (success) and from the zodiac to the PPC wm6.1 NO joy same thing. No responce from PPC failure on the palm.
Suggestions? is there a way to fix this.? I flashed back to stock rom. Works fine. Flashed back to wm6.1 No joy again.
Thanks!
Click to expand...
Click to collapse
I updated my radio from 1.29 to 1.43 and now my bluetooth and beam works perfect. Would not work at all before the update. THANKS xda developers!
nerys71 said:
I have a sprint ppc 6700
I flashed it to the new wm6.1
FANTASTIC
one problem. I can not send my contacts TO the ppc6700 from my sanyo phone any longer.
Stock rom was I searched on the sanyo picked the PPC send item contacts all ready set go. Done.
I do the same now and I get NOTHING on the PPC side and the sanyo says Connection Failed Device Not Found.
I can browse shared folders and stuff. I can Pair them I just can not send contacts.
I tried sending my contacts to my palm zodiac (success) and from the zodiac to the PPC wm6.1 NO joy same thing. No responce from PPC failure on the palm.
Suggestions? is there a way to fix this.? I flashed back to stock rom. Works fine. Flashed back to wm6.1 No joy again.
Thanks!
Click to expand...
Click to collapse
I updated my radio from 1.29 to 1.43 and now my bluetooth and beam works perfect. Would not work at all before the update. THANKS xda developers!
Here is a link to the radio update Version 1.43 http://drop.io/apache143
Related
Hi,
A bit new to PPC and the Magician, just got delivery of my i-mate JAM yesterday.
This might well be user error and a case of RTFM but I can't work out how I send contact information/ pictures/ mp3s or pretty much anything else to my JAM via bluetooth. I've tried sending files from my old P910 and also from a friends XDA IIi. I see no response on the JAM at all and the P910 just errors out saying it was not possible to send. The error message on the XDA was a little more meaningfull though I cant remember exactly what it was but something along the lines of the device not supporting the operation.
I've searched through all the posts on this forum and googled for an answer but not come up with anything yet
Its a brand new i-mate JAM with nothing extra on it running 1.11.0 WWE ROM, 1.11.0 radio version, 1.11.179 WWE ExtROM
THanks in advance for any help
You can use your File explorer and the send-to option to send files via bluetooth.
here is a challenge for all the pros in here :lol:
How to make this work(file explorer/resco explorer) with the Bluesoleil stack ?
How do you receive files/pictures/contacts via bluetooth
Have you tried this cab file " SwitchIT.CAB " ?
I had the same problem , i could send to another machin but not recieve anything. Install the SwitchIT.CAB onto your machine and enable Obex On this should solve the problem . Cheers
Re: How do you receive files/pictures/contacts via bluetooth
Sean_Dillon said:
Have you tried this cab file " SwitchIT.CAB " ?
I had the same problem , i could send to another machin but not recieve anything. Install the SwitchIT.CAB onto your machine and enable Obex On this should solve the problem . Cheers
Click to expand...
Click to collapse
... or simply go into Settings>Connections>Beam>Receive incoming beams (checkbox).. After that, you should be able to receive both IR and BT incoming files.
Re: How do you receive files/pictures/contacts via bluetooth
heretic said:
... or simply go into Settings>Connections>Beam>Receive incoming beams (checkbox).. After that, you should be able to receive both IR and BT incoming files.
Click to expand...
Click to collapse
Yes, that's all you need to do. My wife is constantly beaming appointments to my O2 Xda II mini from her Palm Treo 650 at home. When I next pick it up there are multiple items waiting to be saved. Works a treat.
The MS Stack the Magician uses only lets you choose whether to accept a file after it has already been accepted. If you recieve a 5 meg file, you'll get no confirmation until the transfer is complete, then it will ask if you want to accept.
U can beam files via infrared only to windows and windows mobile devices!!!! I noticed this yesterday...U cant transfer files through infrared to other phones like nokia and sony ericsson...and microsoft themselves are accepting this fact...take a look at this link........
http://support.microsoft.com/kb/830713
If anybody knows to sove this problem please let me know........
roshanjain2 said:
U can beam files via infrared only to windows and windows mobile devices!!!! I noticed this yesterday...U cant transfer files through infrared to other phones like nokia and sony ericsson...and microsoft themselves are accepting this fact...take a look at this link........
http://support.microsoft.com/kb/830713
If anybody knows to sove this problem please let me know........
Click to expand...
Click to collapse
Me thinks you need to read a bit more carefully.
The issue in question affects WinCE v4.2, not WM5.
And if you test sending files back and forth between a Wizard and another device, you'll see it works just fine. I've done it with a SE T616 no problem.
So no, it's not a major bug in the Wizard.
Hi Roshan...
U need to read more here...but just for yr information get hold of a 3rd party software called as Resco Explorer and u can very well send files from IR/BT as well to any of the phones...
Pls note that some of the Nokia/Samsung/SE phones hv IR only to be used as a Modem on IR and not FTP is allowed..so in that case they won't accept the file from IR..
I hope this solves yr prob.
roshanjain2 said:
U can beam files via infrared only to windows and windows mobile devices!!!! I noticed this yesterday...U cant transfer files through infrared to other phones like nokia and sony ericsson...and microsoft themselves are accepting this fact...take a look at this link........
http://support.microsoft.com/kb/830713
If anybody knows to sove this problem please let me know........
Click to expand...
Click to collapse
Nope, I sent all my contacts from an SE610 to the 8125 via IR, so it is not only windows. Reason I did this? Couldn't get BT to send more than 1 contact.... Go figure.
- Tim
I don't think it's been relevant for years, but there's also PeaceMaker:
http://www.pocketgear.com/software_detail.asp?id=402&associateid=17
V
You can send all contacts through BT. Install the attached cab file on your device. In contacts, tap and hold on a contact. In the pop-up menu there is now an option to select all contacts. After all contacts are selected, tap and hold again and choose send contact. It should then beam all contacts by BT to another device. Mind you, the cab only works once, you'll have to soft reset to get the "select all contacts" option working again.
hmmm...
Has anyone tried to send a jpg file from HTC wizard to a symbian operated phone...like nokia 6260,3230.....or nokia6111 , sony ericsson t610....i tried all these phones but not possible...infact i tried with my friends htc wizard and faced the same problem....
My device configuration is like this
Model:O2 xda mini s
Rom version:2.21.4.1WWE
rom date:3/9/06
radio version:02.07.10
protocol versio:413.1.03
Extended rom:2.21.4.101
JPEG file via IR...to a symbian...better send via BT...but...I can't tell u bcos I can't recall as how many times I hv done that....I had used Nokia 3650 and iPAQ 1940 for a years time
U need to check the way u r doing
I tried to send from a wizard to and from a SPV C500 with no joy - but it seems to be the C500 lacks the software to beam or send it by bluetooth.
I have received pics from a Sagem MYX6 and MYX7 and a Sanyo S750 (which has wonderfully set out menus controlling a phone that does not work!)
Do you have ative the transfer option in connection tab?
This is necessary if you want transfer any file trow IR or BT.
checked everything...
my settings are all proper........enabled accept all incoming beams...now i am seeing that sending a file(jpg) to se610 through bluetooth is also not possible :-( file progress bar in se610 hangs in the middle of transfer....
I know that bluetooth is always there...but when we have paid so much then everything should work right...
the only problem is with sending it from htc wizard to any other device....receiving is not a problem!!!
have had a few problems with sending mp3s via BT to new nokia phones..IR works without any problems but is very slow
Hello guys,
Know you've been waiting for this and its been a long time as we were busy on working with our new site.
We are proud to release Flash Messenger v1.5 with contacts support. Feel free to comment here or there in our forums.
http://www.PocketPC-Live.com/flash-messenger.html
CartyStudios, Inc.
Flash Messenger v1.5 for POCKET PC
This is a small software for your POCKET PC, that helps you in sending Class0 sms, where the message on delivery, will directly Flash on the recipient’s screen. The message will not get into inbox and hence cannot be saved. However, some devices can save the message.
Whereas in some devices (Recipient’s device) like O2 Atom, Sony Ericson.., the sender’s number is also withheld.
sounds great, but what does the above mean, can i send to any phone or just pocket pc's ...
Not working with WM5 or something is missing. Installed 3 times but no luck
great thing to add contacts working just fine in wm2003 on my magiciam.. the sms can be sent to any sms capable receiver, inly thing is that sms will look a little bit stranger
yeah this does seem a bit pointless considering you wont always know what type of phone the person on the other end will have and how the sms will be recived.
Guys, did you try installing to the default folder? Program files\flash messenger? Still getting the security error?
I've installed it in program files and moved to storage, works really well
is it support Hermes?
Carty said:
Guys, did you try installing to the default folder? Program files\flash messenger? Still getting the security error?
Click to expand...
Click to collapse
yep. QTEK 9100 (Wizard) here. WM5.
SecurityException Access Denied.
Marshal2::ThrowExceptionForHR+Ox26d
etc...
it's gone?
The Palm Messaging app from the Treo 750v is cool.
It's even cooler on the TyTN.
EDIT: This file has been removed from the FTP site, Please do not upload it again.
Palm claims this is in conflict with their Intellectual Property rights.
Thanks,
Flar (the admin)
Is this the threaded SMS app? That'll be cool if it is. Any screenshots yet? Thanks again
*edit*
HAHAHA it is the threaded sms app!!! Awesome find
very nice... it would be even better if we could maintain the messaging app's hard button functionality (i.e. be able to push it repeatably to toggle between this app and the standard inbox app).
thanks for sharing!!
Does this play well with Push Email feature? Second the motion for PICS
Thanks!
Thanks for the APP..
Ok...yes I am a loser....!
Any chance the cab can incorporate the registry changes, (MMS1 to MMS1old)...or was it left out b/c people may wish to leave the message there as well?
I get nervous on the regedit side...
Thanks, and if not...no problem.
All the changes are already in the cab as far as I can tell. I'm not in front of a PDA...
V
Wow! Is this done independently of hannip's ROM dump? Cool! Thanx theloanranger!
I'm looking forward to use this on my Pocket Loox T830 (when I get it).
Screenshots from those who already installed it please?
Wow, I look away for 2 seconds and someone already did it!
Awesome!
ahhhh! thank you! I knew it would only be a matter of time til someone got this...I'm using it on my 700wx and it is the shiz-nit!
pretty friggin' awesome! Works great!
i tried it on Windows Mobile 5.0 Smartphone, and not surprisingly, it doesn't work too well. it installs fine, but when running keeps generating exceptions in device.exe and gwes.exe. also, the UI does not work well because it's designed for Pocket PC. again, no surprise, but in case any smartphone users are tempted to try it, consider yourself warned.
kudos to whoever got it to work on a Pocket PC though!
MMS gateway and such for verizon
Any one have the settings to get mms working for verizon on this? Thanks in advance
Mmmmm, the lovely Treo 650 messaging is back.
Everything works fine on my TyTN. There is only two minor issues. First one is about desconnecting after sending a MMS. I have to do it manually. Any idea?
The other one has been posted before: I cannot set the Palm messaging to the hard button... although I've sourrounded this using SBSH iLauncher. I've assigned PalmMSG to one of the iLauncher's QuickLaunch icons and this one to the hard button.
Sprint PCS MMS settings also..
I tried putting in the settings I did to originally get the MMS working on my sprint ppc6700, but the settings are not working here. Any ideas?
Some help please..
I tried to look for the following using resco and phm and i can't seem to find the following that was included with the instructions
- Now you've done that, navigate using the registry editor to HKLM\Software\Microsoft\Inbox\Svc and rename the MMS1 key to MMS1.old, and the SMS key to SMS.old. This will prevent the standard app displaying SMS and MMS.
Any help is appreciated! and btw this on a treo 700wx
lol I don't have anyone who can send me a MMS So I don't know if it works or not, lol. But I love this app
this app works beautifully on my MDA! I love it! I have been waiting for this app. I used a program similar to this on the RAZR. I loved it.
Screenshots are found here:
http://discussion.treocentral.com/showpost.php?p=1106882&postcount=15
NOTE: Some of us are having issues. We CANNOT send an SMS to an email address. We get an error message:
"Could not send message. The message center number or the email center number is invalid. Please contact the wireless operator."
Now, in the SMS app, if you go to Menu --> Options --> Advanced tab
Network Configuration/Manual/Edit...
You'll see spots for "message center number" and "email center number" and both are blank. When you put in a number (such as found here: http://www.smsfre.com/SMS-Mesaging-Centers.htm ) they do not stick after hitting "OK".
Any help/ideas?
Guys, I've written a new app, VJSlippyPalm, to toggle between the Palm Messaging App and the normal Inbox.
http://forum.xda-developers.com/showthread.php?t=280282
V
malatesta said:
Screenshots are found here:
http://discussion.treocentral.com/showpost.php?p=1106882&postcount=15
NOTE: Some of us are having issues. We CANNOT send an SMS to an email address. We get an error message:
"Could not send message. The message center number or the email center number is invalid. Please contact the wireless operator."
Now, in the SMS app, if you go to Menu --> Options --> Advanced tab
Network Configuration/Manual/Edit...
You'll see spots for "message center number" and "email center number" and both are blank. When you put in a number (such as found here: http://www.smsfre.com/SMS-Mesaging-Centers.htm ) they do not stick after hitting "OK".
Any help/ideas?
Click to expand...
Click to collapse
Have you tried entering this mcn / ecn at the registry?
MDA Touch Plus..recently just had it back from repair, but they have also done a software upgrade.
Unfortunately now my text messages are threaded and showing "Conversation with" and just the mobile number. Therefore I have to look up my contacts for who is sending me a text message.
Been through all the settings and I have deleted all sim contacts from my contacts list.
Racking my brains here, any help guys how to get it back so i can see contact names again in my messages? I dont mind if they are still threaded so long as I can see who it is.
thanks in advance.
My wife's got the same issue. Just been back to T-Mobile for repair, got the latest firmware installed and now contacts aren't being recognised in the threaded messages.
A temporary fix seems to be to amend the contact mobile number to start +447xxx rather than 07xxx and this seems to work, but as she's got a couple of hundred contacts (uses her phone for work as well as personal use) it's gonna take some time to update them all.
Don't have this issue with either my Diamond or my Trinity (both also running WM6.1).
Any further help appreciated!
One option might be to disable threaded SMS - install this cab and all should be well again.
Hope that works for you!
Message thread resolved.
It works! Many thanks Khrushy
martins40 said:
My wife's got the same issue. Just been back to T-Mobile for repair, got the latest firmware installed and now contacts aren't being recognised in the threaded messages.
A temporary fix seems to be to amend the contact mobile number to start +447xxx rather than 07xxx and this seems to work, but as she's got a couple of hundred contacts (uses her phone for work as well as personal use) it's gonna take some time to update them all.
Don't have this issue with either my Diamond or my Trinity (both also running WM6.1).
Any further help appreciated!
Click to expand...
Click to collapse
*********
Youre right, been onto tech guys, this is the only cure at this moment in time. Took me half an hour to change all the contacts to +44 but its workable now. Thanks for your suggestion Martins40