Bluetooth Issues - Mogul, XV6800 General

I recently purchased a PPC6800 for use on the US Cellular network. I like it a lot except that bluetooth does not seem to work as well as it did with my Q.
I use 3 headsets. One for in the car, one for in the office, and on for listening to music.
They are the Plantronics 520, Blueant Z9, and Plantronics 590.
I have the most problems with the 590 which is the one I use for listening to music as well as talking on the phone. I used to be able to just power on the headset and my Q would automatically link up with the device. With the 6800 it seems that I have to mess with it, including turning off bluetooth momentarily and then powering it back on.
Any ideas on how to fix this? It is sort of annoying. I was so used to my headsets just working.
Thanks for any help.

Anyone have any ideas?

Related

Logitech Bluetooth Headset & XDAII

I am not having much luck with my new headset.
First time I bond the headset it works fine, but once bluetooth tools shuts down the bluetooth after a call, the headset it never gets it back correct.
The headset will still link and the call button will take the call, but I can't communicate.
After you have taken a call on the headset, is there a way of getting the call back onto the xda?
I even tried leaving the bluetooth on all the time but that wasn't that successful either.
Anyone else using the logitech can they please advise me how they manage it's use.
Thanks.
I have been using logitech BT headphones love the unit. I dont have any problems except for the delay for it to connect to the phones. I have to wait for about 2 seconds before its connected to the phones when receiving calls. BTW I have been using it for the past 6 months. 8)
Do you use Bluetooth tools or just the stock standard bluetooth support?
Thanks.

Anyone experience with MDAII & Bluetooth headset?

Hi all,
I have an MDA II and a Plantronics M2500 BT headset. So far so good....
I managed to connect them together, and after some work (bonding, etc.), I was able to phone using my headset.
However, I have the following problem:
If I switch on my BT headset and enable BT on MDA II (so BT 'on', BT headset mode 'enabled'), the 2 devices do not automatically connect.
I have to 'play around' a bit, e.g. by disabling/enabling BT headset mode, turning BT settings on/off/discoverable, turning on/off the BT headset, and try calling some numbers for testing before it works.
After a short while (and if I'm lucky , I can call and receive calls using my headset.
This is of course not the ideal situation. I'd like to have the devices work automatically as soon as I turn them on.
I have the suspicion that this is a bug.... Did anybody else have similar problems and does anyone have an idea how to get this fixed?
Oh yeah: I am using a BT GPS mouse as well for TomTom 5 and this device is also bounded to the MDA II.
Thank you very much in advance!
BTW: the quality of the BT headset (once I get it working) is pretty good, so no problems there...
Yep, one of the problems with (some) BT sets...
Didn't have is with a Sony Errocson HBHxxx, did with a Jabra, didn't with a Supertooth2 etc....
Try the famous BTtools, it often helps...
Or get another headset

[Q] can I listen to SEX1 radio on another BT device?

Hello,
first a little explanation:
on my motorcycle I have a gps with bluetooth. The gps is wired to an (non BT) intercom. The phone is paired to the gps wit BT so I can call and receive calls through my gps (who is wired to my intercom => helmet spekers)
Now my question: can I play the radio on the sex1 and let it play by BT through my gps so I can hear it in my helmet?
Any ideas or suggestions?
I think so, at one point I could listen to music through my car speakerphone. Mine randomly stopped playing music and sounds besides calls though and I don't know how to get it back, if I ever find out, maybe it'll point you in the right direction.
ok, thanks.
At this moment I can't ty it myself because I'm working on the motor and everything has yet to be reinstalled, so I ask it already "in advance"

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?

[Q] Blueant T1 a2dp does not stream

Has anyone had problems with a2dp. Cannot get bluetooth playback with sprint tv, navigator etc. This headset worked with my Sprint Hero. Any suggestions?
Thanks
It turns out that after making a call with bluetooth and selecting the bluetooth option when dialing, media will connect with the headset. Works perfect.

Categories

Resources