Once I use the enterbootloader.exe to go to bootloader and exit with the uniexitbootloader.exe tool, my 6945 freezes at the hp screen with the os and radio no. and with green indicator light on.
I try hardreset, it freezes at that point again. ALthough I want to flash it via bootloader, I cannot go to the bootloader mode. the power+action+reset does not work on my 6945.
Could you please show me the way to bring it back to life? Thank you.
Related
Hello,
i tried to update my BA with wm6.
after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...
even hard or softreset do nothing.
what can i do?
ok i even try the Stuck at startup method.
that's the output of Multiport TTY Version:
set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
it always stuck in blue,green,red,white screen after run multiport tool. what can i do?
------------
i have this problem because of this flashing method:
i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...
how did you hard reset?
hello,
i hold down the power-button and at same time put stylis in reset.
hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
good luck!
ok thanks, i have tried this:
i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.
i dont knwo what to do.
the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.
they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).
the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!
ok now all is happen...
the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.
can i do anything?
1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
jakubd said:
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
Click to expand...
Click to collapse
it was not unlocked befor i flashed with bootloader-method.
i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.
no action on devide, no feedback, nothing. it wont turn on but led is still working.!?
jakubd said:
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
Click to expand...
Click to collapse
ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??
This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.
ok big tanks to the forum. i finally get it. wm6 german on blue-angel!
Same thing here... but worst..
My 9090 is stuck at bootlader...
When i try to update, (i press the power, record and reset), it says:
SERIAL (or USB)
DOC VERSION IS ERROR!
v2.08
Any idea???
that's normal...
try to flash/update your BA in that screen.
the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )
Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also
SilverSamurai said:
that's normal...
try to flash/update your BA in that screen.
Click to expand...
Click to collapse
I there...
I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...
Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...
any idea??
Sorry for my bad english by the way...
alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone
Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!
Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...
hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards
That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...
I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.
dear all experts ...
I tried to update my Shadow by the new wm6.1 rom.. the first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many) :
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
try to install this on your phone
http://forum.xda-developers.com/showthread.php?t=394478
after that try installing a cooked ROM
Dear sir;
thanks a lot for attention to my problem and ur kind reply.
I already tried to do this but...
* How can I upload sspl/uspl to my phone from bootloader because it's the only mode I can work my phone?
* when I tried to do USPL + RUU it go to 100% and then the phone restart and the RUU program says corrupted image...
then the phone stays in it's state (only can go to bootloader mode).
can I use MTTY program to flash sspl/uspl and USPL and then the new rom? if yes .. how I can do it?
Or what may I do my friend..
thnx a lot again
if you can only get to the bootloader then try flashing to the t mobile rom, then start over
Mee toooooo
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
isfected said:
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
Click to expand...
Click to collapse
Power off the phone
Press and hold the camera and voice keys
Insert the USB cable, Keep holding the camera and voice keys until you get the bootloader screen
Then flash an original ROM.
Hi Guys...
I'm trying to cook a rom... but now I'm ...
MY PHONE is BOOTING and BOOTING and BOOTING, I connect the USB CABLE and then the phones turns ON and HTC screen apears then He reboot Again... and again and again...
I already try to flash the Stock Rom and Had the same problem...
Did you Hard SPL it? Also if you from turned off, Hold Volume Down and Power, does it boot into the tri color mode? If so you can get the image file and follow these steps here
http://forum.xda-developers.com/showthread.php?t=691779
To bring you back to square one, then hard spl it correctly and load your rom, I prefer energy, see my sig for that link.
Maybe you should enter the bootloader? try and flash a cooked rom or stock rom to see if it still works
I Already do that... but still the same...
I thinking that is batery down... when I unplugged the USB cable the phone deads...
I had another battery in work, tomorrow I will see,,, because e don't charge...
He Won't Pass HTC blank screen when and turn ON... e reboot and reboot and reboot...
EDIT: Already Find The Problem ... A Pin in Batery connecte was wrong...
hi, i just recently flashed my rom using a reliable source but now my device wont turn on. everytime i push the power button, it shows the htc screen but then shuts off. it dosent get to the windows mobile screen. any ideas on how to unbrick it?
The fact that it will turn on means it is not bricked, a truly bricked pbond will not turn on. While the phone is off hold the camera and the power button down until you see the bootloader come up and connect your phone to your computer via USB cable and wait until you see USB on the screen then flash the rom, if you have HSPL already on your phone you can flash a custom ROM. But make sure it is copatible with hour phone.
Thanks for the advice!!!
Hi i didwhaat you said and used rom update utility.exe to upgrade and flash the rom but im in the samespot as i was before. i have charged the phone. my SPL is 1.11.0000 and IPL is 2.21.0002.
and ideas? my phone still wontt go past the htc screen
Hi
I'm sure you'll find answers in the right forum http://forum.xda-developers.com/forumdisplay.php?f=374