Related
Dears,
my first REAL contribution to the forum
Please find below the link for my new 4 sided custom made cube based on the iCube by musicman
V1
Cube Of Life @ Rapidshare
Cube Of Life @ zSHARE
Cube Of Life @ Uploading
V2
Cube Of Life [email protected] Rapidshare
Cube Of Life [email protected] zSHARE
Cube Of Life [email protected] Uploading
Installation instructions
----------------------
1-un-install any custom cube you have ( soft-reset so that the cube you have is the default one)
2- copy the registry and cab files onto your phone
3-run the registry file and import the settings
4-install the cube by running the CAB file
5-after the soft reset you'll get the 4 sided cube of life
6-enjoy
will upload a you tube video later today showing the animation of the cube
hope you like it
*tested on the HTC NiKi
-------------------------------
It's not what you say that defines you, it's what you do
hum gonna check it
Please post the download somewhere else. Rapidshare is screwed up, I just spent 30 minutes trying to get this file.
PS: Cube of life?
My bookiluki,my beautiful bookiluki.....
Vukile said:
Please post the download somewhere else. Rapidshare is screwed up, I just spent 30 minutes trying to get this file.
PS: Cube of life?
My bookiluki,my beautiful bookiluki.....
Click to expand...
Click to collapse
Done! also added somescreen shots of the 4 side of the cube
they look much better in animation though
looks nice.... after i saw your cube, i had this idea: an UI like a Rubik cube as a menu where you could scroll every column and every row so u will have a real custom menu
at10ti0n said:
looks nice.... after i saw your cube, i had this idea: an UI like a Rubik cube as a menu where you could scroll every column and every row so u will have a real custom menu
Click to expand...
Click to collapse
that's what i had in mind but that needs siome development to state which part of the screen you're scrolling at
i'd be able to create the visuals if a developer hops in
Support VGA &WM5.0 ?
Can not find the executive file - I have only a _setup.lnk that run my Opera and that all. Could you please give some instructions
Doesnt seem to work on WM5. Still,20MB required to install seems a bit steep....
Installed on my Artemis but still only showing 3 sides and the app launcher stayed the same (black) Thanks anyway. Ad
adwin said:
Installed on my Artemis but still only showing 3 sides and the app launcher stayed the same (black) Thanks anyway. Ad
Click to expand...
Click to collapse
you'll need to have the custom application launcher to launch this
will post hopefully tom a video showing the user interface
ahmad.yousry said:
you'll need to have the custom application launcher to launch this
will post hopefully tom a video showing the user interface
Click to expand...
Click to collapse
added a registry file tweak to overcome this and other problems
I installed and for some reason after a while it shuts down my bluetooth on my Touch, and my Jawbone disconnected.
Hmm...I-cube clone?
Ahmad,
Visually this is virtually identical to Musicman's 4 sided I-cube. Is yours a clone with a few cosmetic alterations or something else?
WB
wacky.banana said:
Ahmad,
Visually this is virtually identical to Musicman's 4 sided I-cube. Is yours a clone with a few cosmetic alterations or something else?
WB
Click to expand...
Click to collapse
basically using the same icons yet modifying the transitions to incorporate a cool 3d effect while creating a totally new animaiton between 2 application sides of the cube
so i installed it, where do i open the config?
installed it and don't know how to start it. any steps or guide to use it?
mrjay said:
installed it and don't know how to start it. any steps or guide to use it?
Click to expand...
Click to collapse
what is your phone ?
all you have to do is scroll your finger from the bottom of the screen upwards
ahmad.yousry said:
what is your phone ?
all you have to do is scroll your finger from the bottom of the screen upwards
Click to expand...
Click to collapse
i have a trinity and it doesn't work that way
i need to edit ftouchlfo config file but i don't know what to put there.
at10ti0n said:
looks nice.... after i saw your cube, i had this idea: an UI like a Rubik cube as a menu where you could scroll every column and every row so u will have a real custom menu
Click to expand...
Click to collapse
Cool idea. Not sure how well it would work in real life though.
I've been searching for awhile for the registry entry that controls the color of the selection highlight when you scroll thru different selections. An example would be when you scroll you start menu or contact and such.
Any help would be greatly appreciated!!
EDIT: Here is a link to most (all) of the registry entries for theme colors
http://wiki.xda-developers.com/index.php?pagename=WindowsMobile5Colors
Scroll down for Custom Manila cab file
I did this a long time ago with SKTools, but im sorry because dont know the registry key for this.
Thanks for the reply. I've since then managed to find it and was actually looking at the right key all along but for some odd reason my phone would not respond to that particular key change. Finally I decided to cab up the theme and install it with my registry edits and it worked great Now I have a Manila theme without the ugly green highlight. It's grey instead
Bump due to updated info...
lllboredlll said:
Thanks for the reply. I've since then managed to find it and was actually looking at the right key all along but for some odd reason my phone would not respond to that particular key change. Finally I decided to cab up the theme and install it with my registry edits and it worked great Now I have a Manila theme without the ugly green highlight. It's grey instead
Click to expand...
Click to collapse
did the HTC home icons you are using come with your theme? Where can I get just the icons? thanks!
nursemm05 said:
did the HTC home icons you are using come with your theme? Where can I get just the icons? thanks!
Click to expand...
Click to collapse
You can get those from the HTC Home Customizer app but I will zip them up for you and attach them to this post.
lllboredlll said:
You can get those from the HTC Home Customizer app but I will zip them up for you and attach them to this post.
Click to expand...
Click to collapse
thanks! I don't think they came with the version of HHC I have.
lllboredlll: may i ask what font you are using, and more importantly, how you were able to make the start menu font non-bold?
nursemm05 said:
thanks! I don't think they came with the version of HHC I have.
Click to expand...
Click to collapse
I'm pretty sure you download it within HHC. That's how I get it now even though I have the file on my PC. Are you running HHCv10final?
m.carroll said:
lllboredlll: may i ask what font you are using, and more importantly, how you were able to make the start menu font non-bold?
Click to expand...
Click to collapse
I extracted an OEM from PPCGeeks OEM package and tweaked it. The font setup is the same as it was in the manila theme pack but I changed the color.
Other than that, here's a link to the thread that explains some font changes.
http://forum.xda-developers.com/showthread.php?t=334781
lllboredlll said:
I'm pretty sure you download it within HHC. That's how I get it now even though I have the file on my PC. Are you running HHCv10final?
Click to expand...
Click to collapse
Not sure what I have. I'm almost positive it's final though since it's in the PPCGeeks kitchen. But thanks for posting it! It wasn't there.
nursemm05 said:
Not sure what I have. I'm almost positive it's final though since it's in the PPCGeeks kitchen. But thanks for posting it! It wasn't there.
Click to expand...
Click to collapse
That one is the final version. If you goto the download tab, click connect to download server. Once connected select Icons from the drop down menu then scroll down. It's right under all of the baseball sets.
TF3D Neon Tabs Theme
Still development in progress but so far I have managed to get the actual TF3D tabs to be in a type of "Neon" scheme.
I will be working heavily on this trying to go through all icons in TF3D making them Neon so there will be many updates to follow making this simply perfect.
Feedback more than welcome and opinions probably will be worked in.
Please note, people have confirmed this works on....
-- Touch Pro 2
-- Touch Diamond 2
-- Touch HD
If you do try this on any other phone, please let me know the outcome, I should be able to adapt the files to work on any phone in theory
The Cab file is fully un-installable so if you don't like them, just remove the program in Remove Programs and you're back to normal.
Screen Shots
Updates
Version 1.2a - 10-06-2009
- Changed some colours around to make it view better
- Added different options for different people, plain, transparent curtain, transparent slider, transparent curtain & slider (can't please everyone)
Version 1.2 - 10-06-2009
- Created the 4 icons in the people secions
All People - Favourites - Updates - Call History
- Also added Transparent bottom curtains and transparent slider so no need for extra installations.
Version 1.1 - 09-06-2009
- Created tab icons when icon is not selected
Version 1.0 - 09-06-2009
- Created Tabs for following Tabs when selected...
Home - People - Messages - Email - Calendar - Internet - Stock - Camera - Music - Weather - Programs - Settings
Nice work. Thanks.
Just updated with Version 1.1 which has all tabs coloured now even when not selected
cab
hi everyboby, sorry maybie i make a mistake by posting here, but i got a little problem, when i extract the file i didint see any cab file, even when i put it on my storage card ,i can only see a setup, then double clic, and going straight to open a web page and nothing else, i did some reseach to know how to install the cab, can soemeone please help me about that i am totaly knew in wm, i got the tp2 answsome mobile, and i really like this forum, sorry mod maybie this is the wrong place to post , but really need advise pls .
thaivid said:
hi everyboby, sorry maybie i make a mistake by posting here, but i got a little problem, when i extract the file i didint see any cab file, even when i put it on my storage card ,i can only see a setup, then double clic, and going straight to open a web page and nothing else, i did some reseach to know how to install the cab, can soemeone please help me about that i am totaly knew in wm, i got the tp2 answsome mobile, and i really like this forum, sorry mod maybie this is the wrong place to post , but really need advise pls .
Click to expand...
Click to collapse
There is no need to extract the file, it's a cab anyway.
Just copy the file to your phone and open it -it installs itself.
Beautiful!
Thankz!
H.
h.vanleeuwen said:
Beautiful!
Thankz!
H.
Click to expand...
Click to collapse
Hope you all like them.
I'm going to be working on the lot in 'All People' tonight, so hopefully should have an update later.
Also going to be working on the actual button on the base, any ideas from anyone how you'd want it to look?
nicelad_uk said:
Also going to be working on the actual button on the base, any ideas from anyone how you'd want it to look?
Click to expand...
Click to collapse
What do you mean by this?
h.vanleeuwen said:
What do you mean by this?
Click to expand...
Click to collapse
The slide part, the button that you hold to move and slide, the "block". Can't think what its called but its the rectangle block that you slide from left to right.
Ahh ok, you mean the slider .
I'm already using Lucarp's transparent slider.
I've attached it, so you can have a look for yourself what it does.
H.
Here's a screenshot of the slider if you don't want to install it
h.vanleeuwen said:
Here's a screenshot of the slider if you don't want to install it
Click to expand...
Click to collapse
Looks good, I want it to be a bit narrower though I think, not 100% sure yet, haven't made my mind up. Think I'll have a play around and might incorporate it in my icon set.
Update
Updated icons to include people section and also added transparent slider and transparent bottom curtains in so no need for extra installs.
Nice Icon's
Very nice work!...Would love to use these with my Touch HD!!
Jim Becker said:
Very nice work!...Would love to use these with my Touch HD!!
Click to expand...
Click to collapse
I can do them for the Touch HD too if needed. I just need the manila files uploading somewhere if someones prepared to do it?
Have you tried it on the HD? It might just work...?
I will try them out tomorrow and give you an update! Again, they look great! Cheers to your fine work!
Hi there, just want to say it works on my Touch HD Unfortunately I am using a chinese rom (Devilstone v3.7 with TouchFLO 34 2.1.38158.2), so I am not too sure if it will work with other cooked romr, just give it a try I guess~
Here are the screenshots:
This is just the theme itself (with Lucarp78TS.cab)
And this is the transparent both cab (I uninstall Lucarp78TS.cab)
Looks awesome on my TP2. Thanks dude, good job.
all i want is to have the same background on all tabs and to have a transparent slider.
I've been looking for this like a crazy person and tried at least 5 different cabs and none work.
Any one can help me out
Hello
I think i can help you.I was searching for background on all tabs by yesterday
Try hd wall.You will get a result better than you want.
1-Just drag and drop your desired wallpaper for portrait mode
2-Then press landscape on the ta-op then drag and drop a wallpaper fits your landscape mode.
3-Click config and choose your appropriate Manila version then come back
4-Click create cab then choose both "include portrait wallpaper" and "include landscape wallpaper" then press convert button.That conversion porcess will take approximately 2 minutes.
5-Don't forget to consider where you want your cab file to be created checking the option on the top right.
6-And give a name in application title
7-You are ready to go.Press create cab and your cab will be created to the folder you chose so transfer it to your ppc and install then restart.This solved my problem.
And here is the cab to give your slider glass look
http://rapidshare.com/files/347627048/Manila_2.1_Sense_GlassMetal_Slider.cab.html
Hope these two will solve your encountered issues.
gorgeousyousuf said:
Hello
I think i can help you.I was searching for background on all tabs by yesterday
Try hd wall.You will get a result better than you want.
1-Just drag and drop your desired wallpaper for portrait mode
2-Then press landscape on the ta-op then drag and drop a wallpaper fits your landscape mode.
3-Click config and choose your appropriate Manila version then come back
4-Click create cab then choose both "include portrait wallpaper" and "include landscape wallpaper" then press convert button.That conversion porcess will take approximately 2 minutes.
5-Don't forget to consider where you want your cab file to be created checking the option on the top right.
6-And give a name in application title
7-You are ready to go.Press create cab and your cab will be created to the folder you chose so transfer it to your ppc and install then restart.This solved my problem.
And here is the cab to give your slider glass look
http://rapidshare.com/files/347627048/Manila_2.1_Sense_GlassMetal_Slider.cab.html
Hope these two will solve your encountered issues.
Click to expand...
Click to collapse
Hey man, do you happen to have that glass slider cab that you could just post here? Rapidshare is a pain, and I want to see how this one compares to a couple of others I have that are intended to do the same thing. Thanks!
gorgeousyousuf said:
Hello
I think i can help you.I was searching for background on all tabs by yesterday
Try hd wall.You will get a result better than you want.
1-Just drag and drop your desired wallpaper for portrait mode
2-Then press landscape on the ta-op then drag and drop a wallpaper fits your landscape mode.
3-Click config and choose your appropriate Manila version then come back
4-Click create cab then choose both "include portrait wallpaper" and "include landscape wallpaper" then press convert button.That conversion porcess will take approximately 2 minutes.
5-Don't forget to consider where you want your cab file to be created checking the option on the top right.
6-And give a name in application title
7-You are ready to go.Press create cab and your cab will be created to the folder you chose so transfer it to your ppc and install then restart.This solved my problem.
And here is the cab to give your slider glass look
http://rapidshare.com/files/347627048/Manila_2.1_Sense_GlassMetal_Slider.cab.html
Hope these two will solve your encountered issues.
Click to expand...
Click to collapse
Thanks for your help. i already tried but i cant seem to figure out how to get the Home Wall paper
daguila said:
Thanks for your help. i already tried but i cant seem to figure out how to get the Home Wall paper
Click to expand...
Click to collapse
1) Is the cab I attached below one of the ones you've already tried?
2) If you've followed the steps above to install one of the HDWalls wallpapers, and it appears everywhere but your home tab, then you need to just follow the instructions HERE (it's a common thing for people to have to apply those steps when using HDWalls wallpapers)
whenever i've tried to install that BG for all pages wvga.cab file, it messes up my clock display. the clock get's huge & i can even read it. am i doing something wrong? i'm on Verizon & running Windows Mobile 6.5.
sirphunkee said:
1) Is the cab I attached below one of the ones you've already tried?
2) If you've followed the steps above to install one of the HDWalls wallpapers, and it appears everywhere but your home tab, then you need to just follow the instructions HERE (it's a common thing for people to have to apply those steps when using HDWalls wallpapers)
Click to expand...
Click to collapse
hi
i was using the BG for all pages cap greatly on my tp2 when it was 6.1 WM but when i upgraded to 6.5 with the new clock with weather in it , it work but after it destroy the clock and make the weather disapear !!!!
what can i do ?????
try here
http://forum.xda-developers.com/showthread.php?t=635523
I use this cab to make my slider clear.
jmelvin said:
I use this cab to make my slider clear.
Click to expand...
Click to collapse
Thanks man...I'm not running 2.5 yet though, that's why I'm trying every clear slider I can find 'till I get one looking and working the way I want (no luck so far...)
here u go... do you need weather animation??
because i have the tmobile rom also
junior8007 said:
here u go... do you need weather animation??
because i have the tmobile rom also
Click to expand...
Click to collapse
Thanks man, I don't know if I've tried this one before so I'll give it a shot when I get home today.
You can skip the weather animation, but thank you...I don't think it will work with my 6.1 ROM (or am I wrong..?)
hi again
although i still can't have a backround on all tabs on my 6.5 WM, but i have another question since u got to the weather issue.
can i have weather animation on other backround other than the defult ?
casue when i change the black defult one the animations dose not work
junior8007 said:
here u go... do you need weather animation??
because i have the tmobile rom also
Click to expand...
Click to collapse
is this for the 6.5 stock rom?
jmelvin said:
I use this cab to make my slider clear.
Click to expand...
Click to collapse
I finally tried that one, and it works perfectly!! It's the first one I found that works exactly the way I want on my stock ROM.
Thanks again!!
jmelvin said:
I use this cab to make my slider clear.
Click to expand...
Click to collapse
Thanks for the post jmelvin,
Works perfectly.
Many thanks.
Since we don't have a hints n tips thread yet, here's one. Just a few odd things I found...
1. I think it's a WM6.5.3 feature, but for some reason, if you install either Dutty's task manager, or the HTC Task Manager linked below, tapping on the taskbar brings up a larger version of the bar, with a magnifying glass icon that will allow you to enlarge the screen and pick out small buttons more easily. Not sure why this isn't enabled out of the box, or why doing this enables it. S:
http://www.freewarepocketpc.net/ppc-download-htc-task-manager-v2-0.html
2. A far better task manager (and the only one I could find that works) than the installed MS version...
http://www.freewarepocketpc.net/ppc-download-arkswitch.html
3. The same CAB that can be used to add a "Mark all as read" item into the Outlook menu on the HD2 (item 47in link below) works on the Mini as well.
http://forum.xda-developers.com/showthread.php?t=583638
4. Manual rotation of the screen using a long press of the "call" can be done the same way described in the above HD2 hints and tips thread, mentioned in post 5, by downloading rotate.exe and putting a long_send shortcut into \Windows.
ianjd said:
2. A far better task manager (and the only one I could find that works) than the installed MS version...
http://www.freewarepocketpc.net/ppc-download-arkswitch.html
Click to expand...
Click to collapse
Why do you think this is better? I've been using the default one and it seems working fine.
ianjd said:
4. Manual rotation of the screen using a long press of the "call" can be done the same way described in the above HD2 hints and tips thread, mentioned in post 5, by downloading rotate.exe and putting a long_send shortcut into \Windows.
Click to expand...
Click to collapse
I had a quickly look but i cannot find the right rotate.exe file. Can you post it,plz?
BTW: thanks for the hints!
rigo007 said:
Why do you think this is better? I've been using the default one and it seems working fine.
Click to expand...
Click to collapse
Its user interface is better designed. It uses the screen space better, with larger, clearer text and a built-in close button for each task, rather than the select-endtask approach required by the standard task manager. Switching is done with a single tap rather than a double-tap, and it is activated by tapping on the left of the taskbar rather than by using up a program launcher space. I haven't installed a screen-grabber yet, but the attached image should clarify, have a look and compare.
I had a quickly look but i cannot find the right rotate.exe file. Can you post it,plz?
Click to expand...
Click to collapse
Should be attached.
BTW: thanks for the hints!
Click to expand...
Click to collapse
You're welcome!
@ ianjd
How did you change the battery meter on the taskbar?
zalaros said:
@ ianjd
How did you change the battery meter on the taskbar?
Click to expand...
Click to collapse
I'm afraid I didn't, that's a stock image of the task manager, not my device.
THX a bunch man.
Here a explanation for the "rotate screen" program, so you dont have to search through the HD2 thread.
Make a shortcut of the "rotate screen" program, rename it to long_send.lnk and copy it to \windows, then long press call button and this program will be executed, rotating the screen.
Try MMTaskManager. It's a better task manager. App thread found in the Windows Mobile Apps & Games forum of this site.
what's rotate screen program..?