Hi ;
I'm looking for Bluetooth Manager for BA with Windows Mobile 6.1.
I found a version named Broadcomm ,When I installed it ,my bluetooth stack never run ,Then I had to make hard reset.
Regards
What is wrong with the one (Microsoft) that is built-in in your ROM?
Related
If I install the WIDCOM stack, will I get a new BT Manager as well? I need Service Discovery Protocol . . . any help?
C.
Yeah. Your current remains and you get a second BT manager from WidCom.
Regards,
Mark
Can somebody be fair to say in which condition they succeed to make it work with XDA II / QTEK 2020. I have tried to install widcomm stack as explained in other thread http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
But with 2.2 or 2.06 rom I only get not enough memory when I try to start it.
So which version of Rom, Radio and Extend can be used with widcomm BT stack. and does it really work with HD ipaq BT Headhones ?
Thank you
i dont believe that any of the bluetooth stacks support a2dp which is as far as i know required to get stereo sound to such a headset
Ipaq Bluetooth headphones does work with XDAII
I have made it worked with XDAII, but you have to use either Widcomm stack version 1.0.0.3500 or 1.5.0.2000.
My ROM version is 1.72, Radio 1.17 and my own Customized Ext. ROM. I did try it with 2.2 ROM but the BT stack is a bit unstable (every now and then it reported not enough memory, especially when you have lots of thing loaded on Today screen) so I downgraded back to 1.72.
I also had this headphone worked with PC using IVT Bluesoleil stack.
Thank you I will try to downgrade again to 1.72. rom.
Is it possible to post me the complete reg modification I am not sure that in the thread wher I got the widcomm stack http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=0
it is a complete and I expect to be the reason of the memory trouble ?
Another fact is that I am using a french version of 1.72 ??
Thanks for any help
The complete reg modification is on this page:
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
Cheers,
I finally succeed to install the widcomm stack with Stero Profile . The way I used is :
1) Remove [HKEY_LOCAL_MACHINE\Services\BTIcon]
2) Remove [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
3) Reset
4) install "Broadcom Widcomm 1.5.0.0801 PPC.cab" which is somewhere in the forum
5) copy all the files of Widcomm 1.5.0.200 in windows directory
6) Install Platformxxx.reg
7) reset
8) Install "Broadcom Corporation BT-PPC AV.cab" included in the file I found in the forum in "Broadcom Corporation BT-PPC AV.zip"
And now I can pair and use HP BT stereo Headphones whitout anyproblem on any version of the Rom.....
Just buttons of the headphones are not working is it the same for all ?
and Headset profile doesn't work anymore whith my BT Headset.
I will try with my BT GPS and BT Stowaway Keyoard and Mouse.
I want to use my Magician as a wireless modem over bluetooth with my laptop, but it isn't working... Now I use both windows and bluesoleil stack on my device.
With windows stack I try to use Wireless Modem utility, but without success (I can't see DUN profile on my device with laptop)... In a bluesoleil stack I was trying to select different COM ports in DUN preferences but without success too...
What can I do with this trouble?
P.S. Sorry for my bad english.
Did you use the A2DP extension patch for your MS Stack? If so, the Modem isn't available there. You need the original stack for the modem to work.
Yes. I'm using it.
I'll try to restore original state (but I feel it's a bit problematic...)
Yes. The only one solution to restore original stack was a hard reset. For now DUN is working correctly. Many thanx.
Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?
Anyone has some idea?
For a running project we moved from old HP PDAs to new HTC "Touch 2" smartphones. But unfortunately the bluetooth stack preinstalled on these devices isn't accepted by Labview Mobile applications, and the Widcomm stack in Labview is not compatible with this phone.
I did the following procedure to try and get the program working:
Labview BT stack
Hard reset of device
Turn on bluetooth, set to discoverable
Via LabView/Project Manager/ Windows Mobile 6 Device/ Install / "Support for Widcomm Bluetooth" install BT support on PDA, accept install on PDA.
Soft reset PDA, after reset the message "'BTTrayCE' is not a valid Pocket PC Application" is shown, and it's not possible to turn on BT.
By removing "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir on the PDA, and soft reset, BT will turn on again.
Start Labview application (StimCom CRE_PDA.exe)
Select 'Search for BT devices'
StimCom CRE_PDA.exe will crash, and WM asks for error reporting
notes: method above installs Widcomm stack for Windows mobile version 3. The program is listed on the PDA as "NI Labview Pocket PC Bluetooth support 7.1". Uninstalling this program from the 'remove programs' will fail.
On the clean HTC image "BtSdkCE50.dll" and "BtSdkCE30.dll" are present in the Windows directory, so I assume that both v3 and v5 of the Widcomm stack are allready installed.
This leads to the conclusion that Widcomm v3 stack is needed, but the one provided with Labview is not compatible to this system, and the version present on the device is not compatible with Labview.
(v4 doesn't exist)
Step 1 till 3 are enough to get the Labview program running on a Sony Erricson Eperia with "Jack v5.0" WM6.5 firmware (the same BT hardware?) and on a HTC Touch with a Dutch WM 6.0.
According to http://zone.ni.com/reference/en-XX/help/372508B-01/lvpdagsm/pda_install_widcomm/ when both the "BtSdkCE30.dll" and "BtSdkCE50.dll" are already present, you must only copy LVBtw.dll into the Windows folder of the device. I tried that as well, but the program still crashed as soon as you try the bluetooth connection.
I also tried to copy "BtCoreIf.dll" & "BtSdkCE30.dll" from the /Windows dir of a Xperia WM6.5 (Custom firmware "Jack v5.0" (International English) because that device also had WM6.5 and the program worked fine on that device. But on the HTC Touch 2 it gave the "'BTTrayCE' is not a valid Pocket PC Application" error.
The same error is given when I try to install the Widcomm stack for x51v ( http://www.mobilitysite.com/boards/...widcomm-axim-x50v-x51v-state-development.html ), and the same error is given if I copy these files from the Broadcomm SDK (BTWCE-1_7_1_5201-SDK.zip)
Firmware of the HTC Touch2 NLD:
R 3.48.25.27
G 61.41t.25.31H
D 1.28.66092
Any suggestions on how to fix the problems with the BT stack?
(install custom firmware is not an option, due to legal issues)
Thanks in advance.
(the question is also asked in the NI developers zone: http://forums.ni.com/t5/LabVIEW/Err...ocket-PC-Application-quot/m-p/1272414#M531155 upto now no answers have been given)