ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?
itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`
lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer
Click to expand...
Click to collapse
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer
exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Tell the people around you：Taiwan is a province of China！！！
cheer for you
yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right
Hi,
I got an error when trying to install a new ROM. Now, when I bind my telephone, I see a screen with 3 colors (RGB) written: " RUU IPL 2.20.0002 SPL 2.20.0000" How I can proceed?
My phone is:
ELF0100 - p3452
I toooo
I try with many recomendations....
Please HELP!!
Most important part is.
What have you tried from this Page:
http://forum.xda-developers.com/showthread.php?t=347700
Hope this helps.
Noonski said:
Most important part is.
What have you tried from this Page:
http://forum.xda-developers.com/showthread.php?t=347700
Hope this helps.
Click to expand...
Click to collapse
aaaaaaaaah good to see Noonski boy back in ELF forum
Hi
I killed my Touch Elf. Stuck on logo and power off automatically...
Ipl 2.24.0002
Spl 1.17.0000
I used ELF_USPL_1.17.0000 and flashed with Onyx_3.1.2_16MB_4MB_upload2.zip
Recently i tried to flash with ELF010050_BSTAR502_DUMPED.rar but stay the same...
I would apreciate if any genius can help me out...
Thanks
rushwhq said:
Hi
I killed my Touch Elf. Stuck on logo and power off automatically...
Ipl 2.24.0002
Spl 1.17.0000
I used ELF_USPL_1.17.0000 and flashed with Onyx_3.1.2_16MB_4MB_upload2.zip
Recently i tried to flash with ELF010050_BSTAR502_DUMPED.rar but stay the same...
I would apreciate if any genius can help me out...
Thanks
Click to expand...
Click to collapse
u dint kill ur ELF...u jus have a non-bootable combination of IPL and USPL
so just flash USPL 2.26 and you are good to go...
follow the steps carefully to ensure you are flashing USPL 2.26 ONLY
http://forum.xda-developers.com/showpost.php?p=2415645&postcount=3
and flash any CUSTOM rom again
Hi Thanks for replying me
Where do i sstart?
Here
For users that already have IPL 2.2X series
or here:
For users that have IPL 1.1X series
Thanks
()'s
Edited:
Its working again, just flashed using ELF_IPL-USPL_2.26.0000
Thanks...
How can i unlock now ?
rushwhq said:
Hi Thanks for replying me
Where do i sstart?
Here
For users that already have IPL 2.2X series
or here:
For users that have IPL 1.1X series
Thanks
()'s
Edited:
Its working again, just flashed using ELF_IPL-USPL_2.26.0000
Thanks...
How can i unlock now ?
Click to expand...
Click to collapse
its USPL bro...so its unlocked now...u can flash ANY CUSTOM rom
Thank you. Fixed
Problem fixed.
Thread closed.
Any one can help me ?
I have problem with HTC Prophet O2 XDA hang on Startup.
Screen Show only QteK
IPL 2.15.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Show only this on Screen.
I do ROM Update & Recovery But still same .
I need Urgent help.Any one have IDEA what to do ?
JHON_DREAM.
You need original official ROM to overcome the boot screen.
Do you have it?
Then try with that and post the reslt.
JHON_DREAM said:
Any one can help me ?
I have problem with HTC Prophet O2 XDA hang on Startup.
Screen Show only QteK
IPL 2.15.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Show only this on Screen.
I do ROM Update & Recovery But still same .
I need Urgent help.Any one have IDEA what to do ?
JHON_DREAM.
Click to expand...
Click to collapse
Read the Upgrade Guide again and look for the Recovery Steps follow that and your problem will be Fixed it worked for me if you cant find the files you need NO_Vendor WM 5 Rom let me know al upload and post the link here for you ok
read here
read carefully pls
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
shipped ROMS for recovery <preferrably ROMs with NVID or NovenderID
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
how to use shipped ROMS:
http://wiki.xda-developers.com/index.php?pagename=PRO_ROM_BASIC
then if you have recoverd your device and want to flash a new ROM you may do so by following this steps:
http://forum.xda-developers.com/showthread.php?t=350033
or here:
http://forum.xda-developers.com/showthread.php?t=310452
hope this helps
Hello anyone,
i just have done some bull****, i guess...
yesterday evening i copyed "EnterBootloader.exe" via USB to my VPA compact 4 & run it from over there. meanwhile this step i was connected to USB (maybe the fault [?])! the SIM-card was inside the device, but no SD-Card.
next a whitescreen popped up and i waited 1.5min... i couldn't wait any longer, so i pressed on-/off-button...
nothing happened if i press the on-/off-button again, nothing happens! no LED is blinking any longer, even i connect it to 230V.
my situatin is really uncomfortable to me - please help me to get back the manufacturers settings!
thx in advise
Beli
why did you copy "EnterBootloader.exe" to your device and run it? What where you trying to do?
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Belisario said:
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Click to expand...
Click to collapse
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
ace10134 said:
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
Click to expand...
Click to collapse
It was not my intention to flash any ROM...
Thanks for the advice, but for now i'm unable to flash any provider ROM, because i don't have any!
...i guess it should be a GERMAN vodafone ROM, because that was the last runnig stable.
now a few questions, which the WIKI was unable to answer:
where to get this unknown ROM?
over here?
how to install (guide/tut would be nice...)?
what about the two different "goldcard"-methods?
Elf-Goldcard
Herald-Goldcard
what about the so-called "Unbricker"?
over here
thewingster.com is the best place. check it out
Brandonii said:
thewingster.com is the best place. check it out
Click to expand...
Click to collapse
Well it's not going to solve his problem.
I wish my website could fix his phone in an instant, but it can't He'll have to do the Goldcard, most likely
So, if the Goldcard is the best solution for my Herald, i have to try it... otherwise there is no way out.
BUT:
The website "hides" a link to the official ROM of T-Mobile Wing (US).
I've modified the link, but i don't know if i'm at the right place over HERE.
Maybe i should try it, but they need the so-called IMEI... i don't want to offer it to them, only if it would solve my problem!
As far as i know, i need to download the official ROM of Vodafone Germany with SPL-version 1.09.
If any of you has this ROM or something that could help my to find it, please post a "hint" for me where to get
Thanks in advance
Beli