How to: Flash an original ROM - 8125, K-JAM, P4300, MDA Vario General

Hi,
i have a Qtek 9100 with hard spl
i downloaded an original imate rom but in this rom there are also ipl and spl so, this rom is not a safe rom.
Is there a way to extract the rom and flash it?
Thanks and sorry for my bad english...

nico3dfx said:
Hi,
i have a Qtek 9100 with hard spl
i downloaded an original imate rom but in this rom there are also ipl and spl so, this rom is not a safe rom.
Is there a way to extract the rom and flash it?
Thanks and sorry for my bad english...
Click to expand...
Click to collapse
First remove the 'HardSPL',after that flash to official IPL/SPL (Bootloaders) and then you can easily reflash and revert back to the official rom.Check out the Sticky posted in G4 forum 'How to remove HardSPL',you'll find all the instructions and files in this wonderful guide.

Related

Upgrading to WM6 WWE

Hi i have a quick uick question in regards to upgrading my XDA Orbit i have done the USPL flash and downloaded the WN6 wwe rom which is a os.nb so i wanted to no what program i need to use to flash the rom on to the device
Thanx in advance...
Not sure how you could have missed it but have you looked in the Artemis WM6 forum at all? Of particular note is the complete idiots guide thread.
si200 said:
Hi i have a quick uick question in regards to upgrading my XDA Orbit i have done the USPL flash and downloaded the WN6 wwe rom which is a os.nb so i wanted to no what program i need to use to flash the rom on to the device
Thanx in advance...
Click to expand...
Click to collapse
Read this Si200
http://forum.xda-developers.com/showthread.php?t=299154

Help to send back my polaris....

hello,
i will send back my polaris to htc for repair but i have installed another rom on my device. do i need to install back the original rom?. I bought my device in norway , can i install original swedish rom and spl or do i have to install the norwegian rom, where can i find the original spl and rom?
have a look on this post:
http://forum.xda-developers.com/showthread.php?t=381600
and don't forget to thank fktsndr...
you'll find original swedish dumped rom, original spl...
after restore, you can send it to htc....
cheers!
do i need to install first hard spl olinex and efter riginal swedish rom and after that original spl???
spamb said:
do i need to install first hard spl olinex and efter riginal swedish rom and after that original spl???
Click to expand...
Click to collapse
I think you have hardspl on your machine, because you have not the original rom
So, just install the original rom, after the original spl.
my phone have from beggining norwegian original rom can i flash original dumped swedish rom and after hard spl , can them see that???
sorry my bad english
spamb said:
my phone have from beggining norwegian original rom can i flash original dumped swedish rom and after hard spl , can them see that???
sorry my bad english
Click to expand...
Click to collapse
I suggest use hard-spl if you want to install different rom than shipped with your pda.
i mean, my phone was shipeed with norwegian rom, i live now in sweden and have install original swedish rom and original hard spl to device , do i need to flash back to norwegian rom or can i sent to repair with swedsish rom, cant htc see that???
spamb said:
i mean, my phone was shipeed with norwegian rom, i live now in sweden and have install original swedish rom and original hard spl to device , do i need to flash back to norwegian rom or can i sent to repair with swedsish rom, cant htc see that???
Click to expand...
Click to collapse
Sorry but I do not understand
There is NO original hard-spl...There is hard-spl or and original spl.
If you want to sent it back to HTC you have to install shipped rom and spl.
If you want to install NOT the shipped rom, you sould install hard-spl first.
thanks all for the help. i get phone back today from repair ,they change mainboard and phone is okay now, befora i get problem with bt,camera, storage card and microphone

how do i downgrade from a 1.56 rom to stock orange rom?

hi
i used uspl to flash dutties 3.9
part of that process was changing spl to 1.56
i now need to do a warrenty claim for orange and want to flash the stock orange rom
what are the first things i need to do to downgrade the spl from 1.56 to the old version?
thanks
just flash an official htc english rom and hope that orange don't notice
go on the orange site and download the latest rom for you phone from it. I had to do the same thing for my diamond
fowler002 said:
just flash an official htc english rom and hope that orange don't notice
Click to expand...
Click to collapse
if they do notice, thats me screwed so i would rather do it properly
i've put the phone in bootloader mode, and spl is showing as 1.54,
how do i get it to show the older version
I've looked at crackwhores guide, but it doesn't say anything about downgrading with uspl method
salv90 said:
go on the orange site and download the latest rom for you phone from it. I had to do the same thing for my diamond
Click to expand...
Click to collapse
is the latest rom on spl 1.54?
where do you find the roms on the orange websit?
fowler002 said:
where do you find the roms on the orange websit?
Click to expand...
Click to collapse
i gave up looking
i'm still trying to figure out how to change spl from 1.54 to a previous version to take the older orange rom
HELP
ok i'm a bit further on but things aren't good
i flashed an orange 1.19 rom which i found in the wiki
however, the colors on the screen are very poor (16 colors)
i think this is because the SPL on the phone is 1.54, and i then flashed an old rom ?
HOW CAN I REVERT THE SPL? (or am i barking up the wrong tree?)
this is urgent now, PLEASE HELP
m.r.davies said:
ok i'm a bit further on but things aren't good
i flashed an orange 1.19 rom which i found in the wiki
however, the colors on the screen are very poor (16 colors)
i think this is because the SPL on the phone is 1.54, and i then flashed an old rom ?
HOW CAN I REVERT THE SPL? (or am i barking up the wrong tree?)
this is urgent now, PLEASE HELP
Click to expand...
Click to collapse
I read in here that you dont need to use USPL or HSPL just run the original ROM

[Q]Using a shipped ROM with a CID-unlocked device

First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Fa7my said:
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Click to expand...
Click to collapse
All shipped ROMs contain an SPL.
If you have a Hard SPL it will not allow flashing of ROMs with built-in SPLs. That's the point of it being called a HARD SPL.
If you have the USPL instead of Hard SPL it will allow flashing of ROMs with built-in SPLs (but not safe).
If you don't have any USPL/Hard SPL, but just the stock SPL and you use the white screen method instead to flash, it's even less safer AND NOT RECOMMENDED.. because, if you brick your device you won't be able to flash anything from Bootloader since you only have the original SPL.
The white screen method is only used to flash the USPL or Hard SPL. If you have a Hard SPL, the white screen method is the only way to downgrade to another SPL.
You can remove the SPL from the shipped ROM though.. (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool).
For more questions, just search or post in the correct thread.
thnx dsixda.. u r the best
can someone add the bloody response from dsixda to the roll up thread or something?? maybe it will save sometime for the n00bs (and for the rest of us too).
good day sir...
so by using this (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool) is the safest way to downgrade lets say from WM 6.5 to WM 6 ?
I'm downloading this file:
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD001
Version: 2.20.707.1B
Language: USA
for my:
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 3.10.0002
SPL : 3.10.0000
I used NBHextract.exe to extract the files to make ROM my question is should I add the ext_ROM or just the OS coz If I want to revert back to its original state I can flash it with this "original" OS.
-by the way what OS version is this : RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
WM 6.0 or WM 6.1? thanks

SPL version

can i know the SPL version of the ROM before i download it ??!
i have 1.66.0000 SPL version and i want to change to 1.42 or 1.43 version
note: i have ROM version: { 1.66.415.3 (76641) wwe } , ROM date : 01/18/10
you need to find a stock rom that matches your region and provider that is version 1.43 or 1.48.
thank u....
i see but as they say in HTC web .... u can't do downgraded for the ROM !!!
is the rom locked to provider? if the HTC website says no to your serial, then it is locked to provider, so you must get roms for that provider, that is ver 1.43 or 1.48.
thanks,..
Is the SPL the same in all ROMs......??
I mean that if i change my ROM, the SPL will be the same or will change??!
To the OP,
Please ask all your spl and rom related questions in this thread to avoid duplication. I have closed the other thread down.
Thanks
WB
ok , i am still new , and don't know the rules
Thanks EddyOS , but....
How can i flash the stock ROM i started with using the SD card method to get the SPL back on ?!!!
hamaydeh said:
Thanks EddyOS , but....
How can i flash the stock ROM i started with using the SD card method to get the SPL back on ?!!!
Click to expand...
Click to collapse
There is a tutorial sticky in the Rom Dev forum on here. Take a careful look at it then proceed once you FULLY UNDERSTAND what you are doing.
Thanks
WB

Categories

Resources