Hi,
I have test different french rom, to work with SFR Illimythics special offer (vodaphone).
Config is also in those thread.
This is my different results of test (sorry for english's body but my test is in
french) :
Rom Bepe :
Rom : http://forum.xda-developers.com/showthread.php?t=378080
Test : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14122
Rom raramomo :
Rom : http://forum.xda-developers.com/showthread.php?t=380052
Test : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14172
Rom raramomo (SFR Illimythics) :
Rom : http://forum.xda-developers.com/showthread.php?t=380052
Test : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14318
Rom Dr Jo :
Rom : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14228
Test : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14343
Rom Dr Jo ver X :
Rom : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14228
Test : http://www.planete-htc.com/index.php?mod=forum&ac=voir&cat=151&id=14388
Hope that's help
Thanks a lot but pushmail with bepe 0.67 FRA and exchange is ok for me.
that's right that's works for me now !
It's a mistake, I have update my test
Thanks
New rom Dr Jo verX
Hello,
Excuse me for my poor english
I have a question for customer SFR.
What the best rom for you kicou?
Because i saw the test but i never saw any comparison?
Thanks a lot for you works
Bye
tigrouXxX said:
Hello,
Excuse me for my poor english
I have a question for customer SFR.
What the best rom for you kicou?
Because i saw the test but i never saw any comparison?
Thanks a lot for you works
Bye
Click to expand...
Click to collapse
The rom is use actually ! Look my signature !
A little more job to do, but i prefer, lastest build 19209
better translation in french than bepe, an SFR Music works !
Hope that's help.
upgrade Problem
hello i have a problem to update my polaris ( HTC touch Cruise SFR), i lunch the update Rom raramomo (SFR Illimythics), when i do update my PDA restart for update, the multicolor screen appear then the gray screen with 0% appear, then the update stop at 0% for 4 minutes and a screen appear on my pc to tel me that an error occured. when i restart my PDA, it start with the normal SFR Rom
Can you help Me Please
Founf
___________________________________________________________________
Bonjour, j'ai un probleme avec l'update de mon polaris ( HTC touch Cruise SFR), je lance l'update Rom raramomo (SFR Illimythics), quand je demare l'update, l'ecran multicouleur apparait puis l'ecran gris avec le la barre de progression à 0% apparait et il s'arrete a cette etape pendant 4 minutes et un message d'erreur apparait sur mon pc pour signaler une erreur. je redemare alors mon PDA et il normal avec la ROM SFR.
Quelqun peu m'aider SVP
Founf
Have you Hard-Spl on it ?
If you have hard spl installed, boot your device in bootloader mode
(press photo button + on when the device is off) and run the
rom uploader.
Hello,
Do you known a way to keep SFR Music DRM working after a new flash ?
So each time I have to re-download old music ...
Is it possible to keep DRM files on storage card ..
Sorry for my poor english
Francais: A chaque flash ma musique déjà téléchargée sur ma carte de stockage ne fontionne plus (DRM), y a t-il une possibilité de sauver les fichiers DRM, quels noms ont -ils ...?
There is a section in registry about downloaded files. It's should be copied, but
is enought ???
Y a une section dans la BDR avec les titres téléchargés, c surement a recopier.
Maintenant est ce que cela suffit ???
kicou said:
There is a section in registry about downloaded files. It's should be copied, but is enought ???
Click to expand...
Click to collapse
Thanks a lot, I'll try after next flash
Related
Hi all :lol: ,
With this post, Im lookin for someone who could help me to upgrade my french QTEK 1010 (Bouygues operator) to a WM2003 ROM (I dont care to have my qtek in UK...)
I search on the MANY MANY posts of this forum but dont find a solution to LANGUAGE FRA...
my QTEK1010 (32mo):
ROM : 3.15.06 FRA
date: 11/12/02
radio:t313
protocole: 32s54
bootloader: 5.15
Well, I try to put a ROM kitchen 4.00.05 (exe) but I have a message: INVALID LANGUAGE: FRA...
Then I try some ROM (exe) from different websites but the soft block: ROM NOT FOUND ON YOUR DEVICE/VERIFY THE USB/SERIAL CABLE (something like this)
Then i read that I could upgrade my phone by the SD but I dont have any SD reader/writer...
So if someone could explain how to FORCE the installation of the KITCHEN ROM...If someone have the same french Bouygues phone & put another ROM that the original...Im interested....
Thx to all of you 4 your help.
BEst regards,
=JaY=
msn: [email protected]
mail: [email protected]
you should try the SD method. it should work.
Decebal
I had the same problem with a Qtek 1010 3.18 ENG that it doesn't accept the EXE method. Seems that the vendor found a way to make such protection that it doesn't exist in the kitchen ROMs.
I used SD card to upgrade to 4.00.5 ENG and now it's fun to install any other ROM even the original :lol:
My advice is to start by SD card to get rid of this problem and then select or cook your own ROM.
Good luck
Je recherche désespérement une ROM française pour essayer d'extraire les dicos et complétion des mots en français. As-tu fait un backup de la rom, et si oui, peux-tu me le faire parvenir ?
Mes essais de ROM 4.x sur QTEK sont infructueux : effacement de la carte SD, applications qui disparaissent, STORAGE CARD1 -> STORAGE CARD9 alors qu'il n'y en a qu'une, checkboxes et radio buttons qui disparaissent sur les fenêtres, etc ... Alors je reste avec ma 3.18.04 ENG.
Bien à toi,
Olivier.
Viens sur MSN, je suis souvent connecté...
My problem is "solved"
MANY MANY THX 2 KTY TENZIN for her help.
So now Ive got my QTEK 1010 from Bouygues with theses specs:
ROM:4.00.05ENG
date:06/05/03
radio: 4.21 (I have to pass on 800/1800 @ bootloader in order to make it function).
Thx to ALL.
Cheers,
Peux-tu nous faire partager ta découverte?
Could-you explain the process? Thanks.
I send U a mail
bye
Je t'ai envoyé un mail
slt
JeRoMe_aKa_JaY said:
Viens sur MSN, je suis souvent connecté...
Click to expand...
Click to collapse
Je ne suis pas sur MSN.
Où puis-je trouver la rom 3.x FR ?
Merci.
Hello,
I have a Qtek 2020i in English and I want to change Rom in French. How can I do that? Please help me clearly because I'm newone in smartphone.
Thank you
QTEK 2020i FRENCH
Voila une version que j 'ai quelque peu adaptée pour l'installer sur un QTEK 2020i.
VERSION ROM : 1.11.02.FRE
DATE ROM : 31/01/2005
VERSION RADIO : 1.02.00
VERSION PROTOCOLE : 1337.41
VERSION DE EXTROM : 1.11.115 FRE
mis en fr
je l ai mis en fr , je peux t expliquer en mp si tu veux la procedure
pv me
@po said:
je l ai mis en fr , je peux t expliquer en mp si tu veux la procedure
pv me
Click to expand...
Click to collapse
Coucou !
Perso, je serais aussi preneur...
Peux-tu me tenir au couant ?
D'avance, merci.
Hi,
Very simple, follow these steps:
1) register on pocketphone.fr
2) go to download section, pick up:
in Qtek 2020i(4):
- Mise a jour AD2P (if you intend to use stereo BT)
in Roms Qtek 2020i(6):
- Rom_2020i_Dangaard_FR_1-11-02_Extend-rom_1-11-116_Radio_1-03-00
- Radio 1.04 pour 2020i
3) download MaUpgradeUt_noID.exe
ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe
4) Extract all files in same folder in the order below:
- MaUpgradeUt_noID.exe
- Rom_2020i_Dangaard
then run MaUpgradeUt_noID.exe for installation, ignore ID error then re-execute once more.
- after installation, you PDA reboot & restart
- extract Radio 1.04 and run UpgradeUt.exe (you PDA should be in french now, so no more ID error, otherwise use MaUpgradeUt_noID.exe)
- after installation, you PDA reboot & restart
5) if you need stereo Bluetooth headset then just copy the AD2P cab file anywhere on you 2020i, then run it.
Voila... moi je cherche plutot à savoir s'il serait possible de mettre WM5 sur Qtek 2020i
T-mobile MDA pocket pc
Pls can i get English firmware for the above phone
thanks
Nonny
Hello,
That may several day, I try to install the FTouchFloCubeFRv3 on myHTC P3600 (rom : 1.23.406.2 / radio : 1.50.08.11)
I install the .cab file on the main memory of phone, but when the phone start I have this message :
When I try try to open the "Cube Paramerters" I have this message :
Then this one :
And I don't know how how to define the different faces of this cube.
Thus Therefore by default I installed TouchCommander but I haven't the 3D effect which is so pretty.
I hope you can help me
Thank you in advance.
Hi, if you notice this probleme, I assume you've upgrade your phone to faman 4.03, havent' you ?
If yes, just go to windows/demarrage and chech if you have more than one FtouchFlo files.
I believe that you should have Ftouchflo.exe and FtouchFlo.lnk.
FTouchFlo.exe is natively present in this new Faman release (but I don't know the reason, cause it is not associated with any config file????) and FtouchFlo.lnk should be the shortcut added by the cab installation.
So just delete the FTouchFlo.exe, soft reset...and let us know !
Rgds
Thanks for ypu answer,
But it's not that. In fact my radio is this one :
Rom : 1.23.406.2
Rom radio : 1.50.08.11
Protocole : 32.83.7020.20H
Rom EXT : 1.23.406.103
Have you any other informations to help me.
Thank you in advance.
I try again to launch the touchFlo and I have this message :
Then I uninstall it and try tou install the HTC Home plugin and the FTouchFlo but nothing.
I read on other forum that the new faman integrate the cube but if I install it should I have again the GPS activated.
Thanks in advance.
That's it I got it!!
I made a successfull installation (settled) of the last Faman ROM 4.03 (with difficulty because I must used an other faman rom 3.04 and replaced the .nbh file by that of the 4.03) and miracle that works.
Furthermore, I kept my radio 1.5 thus the GPS works.
It is magnificent.
thanks to all for your advices!!
J'ai enfin réussi à installer le cube FTouchFlo !!
Rom : Faman 4.03 FR / Radio : 1.23
Mais maintenant j'ai un problème avec le menu démarrer de la nouvelle interface.
Lorsque j'appuie pour l'ouvrir le menu est tout noir et il faut passer sur chaque rubrique pour qu'elles apparaissent :
C'est un peu génant que puis-je faire ? Comment revenir à un menu démarrer normal ?
Merci d'avance.
first: sorry for my stupid english but i'm french
i have a artemis, the rom aje fr work perfectly but now i cannot flash my device with other rom, the original rom says: invalid model id error 244...
i have tested the black and blue us and surprise, that work so how i can retablish the original rom in my artemis ?
IPL 3.13.0001
SPL 1.11.0000
En francais maintenant
Mon htc tourne avec une rom aje fr et j aimerais le remettre d origine avant de le revendre mais plus aucune rom ne passe dessus a part d autres cooked rom telles que black and blue
que faire ?
BIG THANKSSSSS
Is there any other updates about this.....I have a O2 Orbit that I am trying to flash the offical O2 WM6 ROM on. I have already CID-unlocked the device. When I try to flash the ROM, I get an error stating that I have an Invalid Model ID....Any ideas?
I too have this same problem, someone please help?
Mine is the german version, ive been trying to flash it over to the UK version so i can actually read it.
Salut, as tu telecharger la rom d'origine ? Normalement c'est un .exe et ca se lance de ton pc
hello
here the original Splash screens for SFR Vodafone, O2 and SPL for warranty
Salut
Pour ceux qui ont perdu l'image de demarrage SFR et le SPL original les voilà, ca pourra vous aidez.
Have you got the original splash screen which comes with non simlock HTC ?
hello
here the original HTC splash screen
thank you. It works very well !
nota : think to remove your SD card before flashing
thx! it works great, no need to hard reset and all settings stays as before.
piXie
the HTC one works well, thanks
added O2 original splash screen
Many thanks, m8 for the prompt service
Your help is very appreciated!!
Best regards,
Olioaglio
Full German O2 Recovery ROM by Schaggo can finally
be found HERE (post #29)
Olioaglio
raramomo,
If I want to have a specific image as splash screen, how do I do?
The_Steph
The_Steph
look here
Thanks a lot for your tutorial.
The_Steph
Does any one have the vodafone splashscreen?
Thanks in advance
No loading
Hello, i try it but my ppc screen freezing and write loading... after 5 min my desktop is writing not connection. I have already activesync on before making (trying) make the splash flash
Can you help me?
probléme
tks, for all.
je veux changer l'image de démarage de mon htc (sfr) par celle dhtc original mais je n'arrive. chaque fois j'ai une erreur de connection (erreur 260)aprés la fase 'loding' sur mon htc. quelqu'un peux me donnée les étapes éxacte pour splashé mon htc ?
Merci
I want to change the boot image of my htc (sfr) by the original dhtc but I can. whenever I have a connection error (error 260) after the face 'loding' on my htc. someone can make me up the steps to correct my splashé htc?
Thank you
The_Steph said:
raramomo,
If I want to have a specific image as splash screen, how do I do?
The_Steph
Click to expand...
Click to collapse
Il y a un tuto... http://forum.xda-developers.com/showthread.php?t=375980&highlight=splash+screen
Pour l'erreur 260 , il faut tout simplement que lorsque tu vois apparaitre le menu Canary (multi colors), tu débranches et rebranches immédiatement le cable USB .....
thanks for the original splash screen
Great!
Thanks for this great tutorial an tool!!
So i could overwrite udks splashscreen!!
Frank
When I try to flash my Polaris with HTC or SFR splash screen, my HTC stay in "loading mode"...
An idea ?
OS : M-Amine 2.0
-----------
Quand j'essaye de flasher mon Polaris avec l'écran d'accueil HTC ou SFR, mon HTC reste sur "Loading...".
Une idée ?
SE : M-Amine 2.0