Last night, i've watched on Vtap some videoclips using the WIFI capabilities, and after apx. 30 min the connection was stopped and from that moment is not seeing any wireless network.
I've tried 3 different versions of WM 6.1 and the original WM5 but the same.
Do you think is possible to repair that kind of problem?
same problem here..never found a solution.=(
People, did U used CPU speedup?
anyone got any solution for this?
what radio and roms are u using, have u tried other radio?
I have the same problem stopped working after that i didn't use the phone for like 1/2 a year. tested on WM5 and WM6... I'm kind of a newbie on prophets, so wonders what the radio rom is? and is it possible it will work better on that? isn't it possible to instal some kinds of drivers for it? have a s200 and it uses an Wifi (802.11b/g)... found a driver that was named P500 802.11b/g for WM5 and WM6 clssic, haven't tested it but will it work?
Related
Hello everyone,
well i have differnt question/ issues with my O2 atom:
a) this atom has ROM version 20051123B2 & Radio version MN1XN_PDA_051122. can any one recommend me as to what rom version should i upgrade it with.
would upgrading the ROM harm it? I badly need to upgrade as its probably one of the most initial atom realeases and its too slow to work on.
B) the phone has no smart dial option/software. I tried to install a software intellidialpro but it doesnt work.
C) Doesnt work well if i use as external usb modem connecting it with my laptop. the browsing & incomming bytes tends to stop after initial 10 minute usage and i have to disconnect it and reconnect it all over again to be able to use internet (that too for max 10 minutes)
F1
Hey! Here's a good idea. Why not post this a few more times?
V
It will require a hard reset but go to the o2 site and download the latest rom. Many of the problems people have encountered have been fixed by the new rom.
By the way where did you get intellidialpro. I want try and make it work. I cant stand the way the phone dialing works on the atom, the mini was a lot better.
upgrade rom to 20060123b1 WWE, downloadable from seeo2.com then follow the link below to change the value, now my atom work smoothly compare with my mini
http://www.mobiletopsoft.com/board/view.php?newsid=276
I read the official specs of the Qtek S200, and they suggest it supports 802.11b/g. BUT, ALL the Qtek s200's available here in the czech republic, list their specs as 802.11b ONLY.
Is this possible? Is it a hardware issue, or is there perhaps a way to activate G through a tweak somewhere?
G Wifi Activation.
In attached file, you can find a tweak for making available G Wifi in 9100.
I have a S200 with G Wifi already activated, so I can't tell if it works.
Use at your own risk, but 9100 users say it's perfect.
You have to copy .cab file to your S200 memory, and click on it for install.
Thanks Mondelman
Anyone already tried this out on a Qtek S200?
still wondering
I'm still puzzled whether this is a hardware issue, or a software one? I can't test it on a device. It maybe will make a difference in the use of skype or streaming media, if its limited to B standard.
I cannot understand how could qtek make a g-less model for czech republic.
I have not much experience on the subject (newbie really) but I think I have the same issue (S200 with Dutch OS). Bought the phone in NL and it came with the Dutch OS I took a better look at the box once I got home to see the specs ... 802.11b if you loko on line specs they do mention "g"
I hope that a patch will be available as for the 9100.
btw this was my first posting so Hello to all (great stuff!!)
Makis, have you tried the above patch? Does it work?
I have seen my Prophet connecting at 24mb. Since 802.11b is maximum 11mb, I assume that G is working on the Prophet out of the box. That being said, my laptop connects at 54mb. I'm not complaining because the wifi on my Prophet has done everything that I have asked it to do including VOIP
Matterhorn said:
I have seen my Prophet connecting at 24mb. Since 802.11b is maximum 11mb, I assume that G is working on the Prophet out of the box. That being said, my laptop connects at 54mb. I'm not complaining because the wifi on my Prophet has done everything that I have asked it to do including VOIP
Click to expand...
Click to collapse
Yep I've had a similar experience. Got my s200 and on the box it only mentions 802.11b in it's specs. However, I have locked my router so it only transmits 802.11g and my s200 can still access the network ... so the s200 MUST be capable of using 802.11g. I have also noticed an increase in speed accross the network to my s200 allowing me to stream video without buffering that I could before (when I have my router locked on 802.11b). While it's not blistering fast, it is still quicker, so as Matterhorn says it's probably got a max of 24mb rather than 54mb, but hey that's still miles better than 11mb.
I did not try the patch my self I know someone who have though. I ll post again about this tomorrow.
:?
krale as qdabean mentioned above I just tried the same thing -router only on g
Result: still able to access the net from the my s200!! So who needs a patch :lol:
qdabean, it is strange though cause I got a reply recently from qtek specifying that router should transmit on bouth b&g in order to get good results... Then again it was the saem person that told me changing the language on the s200 is not possible and the only solution was to return it to the dealer and ask for another version
but who cares "g" works case closed.
Thanks guys
Just bought the HTC TyTN last week and everything seams to work fine except the WiFi module. I can't even get it to look for available nets ? I suspect the WiFi module is broken, but want to check if anybody experienced similar problems ? I'm using the Swedish ROM 1.18.263.2. :?:
After finally being able to get my Internet working through PDA connect I decided it was time to test out my Tomtom Go 910 with the new Black. When I was running the original cingular rom that came with the phone I was able to connect to TomTom Traffic and weather services only. Now after the upgrade it recognizes my phone but says that wireless data is not available? Is this due to the proxy issue with cingular or is it just that TomTom does not support WM6 at all yet? Or something else? I'm trying to decide if it would be better to revert back to a WM5 system because I really do like Black 2.5. Hopefully it may be a quick fix.
TomTom910 issue
hi buddy,
I'm in the same boat with my Vario II.
Went to WM6 (LVSW) on the phone and all of a sudden TomTom tells me the DUN connection is invalid (Data over Bluetooth I believe).
*VERY ANNOYING* ....
Same Problem Here with tomtom one V4, tried 7 different WM5 & WM6 Roms and 4 different radio roms, still same problem.
Trying to find the original roms to reflash, rather go back to WM5 than waste the 40 euros i paid for the plus services.
Original ROM
I've got a post out there asking where to find them, will pm you if anyone gets back to me mate.
Yet another device that doesn't support the silly PAN profile. Stupid MS developers thought they were doing us a favor by removing DUN.
At least they came to their senses and said they'll work on getting dun implemented again soon...
Anyone else have any luck with this?
sadly no luck, my spv took an unfortunate trip down 2 flights of stairs and replaced by insurance.
tomtom works on my new one ok, aslong as i dont flash it.
Nope
...not yet, still waiting for M$ to add DUN support back in from what I understand.
May be rolling back to WM5
Is it possible to tether my 3G connection from my 8525 to my Universal? This would help me because I live in the US where the 3G doesnt work for the Universal.
Anyone is it possible?
Should be possible with bluetooth. I've done it with my Hermes and a PocketLoox720
The exact process involved depends upon if you are running the original early version of WM5, or a later AKU WM5 or WM6 Rom
andyf1 said:
Should be possible with bluetooth. I've done it with my Hermes and a PocketLoox720
The exact process involved depends upon if you are running the original early version of WM5, or a later AKU WM5 or WM6 Rom
Click to expand...
Click to collapse
I think the Universal has an old ROM but for the Hermes if I use the original ROM from Cingular I am not sure? Thanks for th info though I will post when I get my Universal later this week. Thanx.