Related
hello all,
Is it possible to have av-out on my wm5 device?
I have an mini usb with on the other end a red and a yellow plug.
i've already tried to connect but it just doesn't work.
is there any application i can use so i can connect to my tv via av???
My phone is a orange M600 aka prophet with latest dopod rom.
TIA
rebelish, that is just not going to work. I mean that is not a PC usb port. First its a mini-usb, second its not got all the WinXP functions which enable it to be so.
What might be a solution is to have a SD Socket AV-out (haven't seen any), or even try it through wifi... There is a program (forgot the name) which transfers the picture to the PC through wifi, but probably does not work for video.
Cheers.
A.) most PDA USB ports are slave, meaning normal addons will not work on them
B.) there are indeed SDIO cards that provide a VGA/AV output
The only pda I've seen with video out is the Dell x51v. I'm guessing it's a fair custom job, using more than just a mini-usb cable.
ok Thanks everybody for all the clear answers.
I do think it's a shame that we don't have that function already in our pocketpc's but than again we can't have it all.
I think i'am going for the bluetooth pal adaptor now because with that one can do the job wireless and i can show my 2Mega pixel pics on my tv screen.
everybody thanx again
cheers
Hi guys, i am currently trying to set up my Athena with my car, i wonder if it's possible to connect my Athena with a external touch screen monitor like this one: http://cgi.ebay.co.uk/8-INCH-TOUCH-...9QQihZ005QQcategoryZ32826QQrdZ1QQcmdZViewItem
throw the VGA cable.
I know it will display the screen throw VGA out, but I am not sure whether it will enable the touch screen function, any of you know this?
Thanks a lot
p.s. I will post some screen shot if I succeed in this project.
Is that a PS2 port?
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
inframan said:
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
Click to expand...
Click to collapse
I am sure you don't need a pen, there are lots of touch screen out there, for example this one: http://cgi.ebay.co.uk/ws/eBayISAPI....tToStoreCat&refwidgettype=cross_promot_widget
I just don't know if we simply plug in the vga cable from our Athena to the touch screen, will that work?
Possibility not, I can kind of see a usb cable there, how about plug that in the usb host ? but then maybe we still need to install the driver.....
Basically, what I am trying to do here to use get a bigger screen to show for Athena in a car. So, I will then have much bigger TOMTOM, and also can watch movie or go on internet.
Any good suggestion guys? Thanks a lot for all your help.
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
johnwalk said:
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
Click to expand...
Click to collapse
it seems like they all need to install driver, do you think it will work without driver?
thats the only problem, does it need specialist drivers? I havnt been able to come up with an answer yet.
But i wont be buying one for the car, somone nicked me vario yesterday from the car so not even chancing the Ameo.
I was just going to buy a little 7" tv I bought this tiny Keyboard out of Maplin on offer. thought it would look sweet in the car. but this is giving me other ideas, anybody shed light!
They ALL need specialist drivers.
Touchscreen is absolute position, mouse is relative. You NEED the custom driver. It may be possible, but I dont know how.
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Basmelek said:
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Click to expand...
Click to collapse
Thanks for your answer, i just ask one of the seller there on ebay, and the answer I got is I will be able to plug the VGA cable in, that will enable the screen to display, but in order to get the touch screen working, I also need to plug in a USB, so now the question is whether the USB host will work on this....and of course the driver need to work too
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
IT WORKS!
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Pyrofer said:
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
Click to expand...
Click to collapse
Your on the right track with this answer,
Look for a touch screen that has a protocol that is treated as a standard HID ( Human interface device ) Ie:mouse, keyboard etc.etc.
if you can find such a device then the built in drivers for plug and play HID's will work fine.
otherwise the rest are right
Did this really work??? What car? This would simply be quite fantabulous.
cyberlancer said:
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Click to expand...
Click to collapse
I'm looking for a mount for my car that has a built in mini-usb plug and a regular usb plug on the other end. Basically, I'm installing a carPC in my car and want a mount that I can quickly slide into a mount and sync with the computer.
I have seen that brodit makes one with a 3-in-1 adapter that I can plug a mini-usb cable into, but I don't want to spend $80+ on a mount. Does anyone else know of one?
I also saw one on ebay (can't find it again) that has a usb cable out that plugs into a cigarette lighter/usb adapter. Does anyone know if this cable will function as a regular usb cable?
Just a heads up, I also have a carpc and I'm currently integrating a program called MyMobiler (which allows you to display and control the Raphael) into my frontend software so I don't have to mount the Phone, I just store it out of the way and use the PC to control the phone.
The MyMobiler site has been down, but I have the cab file if you want to try it out. Best part is that this version is free. There's also http://www.mobiola.com/mobiola-remote-control/3 which isn't free but adds some features.
Hope this could be of some help for you.
Yeah, I use MyMobiler all the time. I suppose that's a good idea, just leave a cable in the glove box or something. A mount would still be nice though.
What frontend are you using? I think I'm going to use Centrafuse since I was having problems trying setup RoadRunner with some of my components.
Gooser711 said:
Just a heads up, I also have a carpc and I'm currently integrating a program called MyMobiler (which allows you to display and control the Raphael) into my frontend software so I don't have to mount the Phone, I just store it out of the way and use the PC to control the phone.
The MyMobiler site has been down, but I have the cab file if you want to try it out. Best part is that this version is free. There's also http://www.mobiola.com/mobiola-remote-control/3 which isn't free but adds some features.
Hope this could be of some help for you.
Click to expand...
Click to collapse
Can you possibly post the cab as I cannot get to it at work!?!?!
I've been using FrodoPlayer for over two years now because I didn't like the frontends that use WinAmp.
Anyway, here's a link to the file:
http://rapidshare.com/files/113805144/MyMobile123_05052008.zip
I don't know if this is known already, but I thought I'd share.
I recently (rather stupidly) bought the wrong type of micro-USB cable, the one with the completely rectangular profile on the micro end. Not wanting to throw it away, I decided to file the corners down so it would fit.
I confirmed the pin-outs were the same, at the site below
http://www.leadsdirect.co.uk/technical/usbwiring.html
The only difference being that there was an identifying pin that was either unconnected, or connected to ground.
When I plugged the cable in, it automatically took me to Navipanel!! I was going to use it in the car anyway, so all in all, very useful!!
ALSO
Just discovered it does not appear to allow data transfer, as the phone does not show up in Windows when connected up with this cable.
I can confirm that if you connect a 'Motorola Mini-USB to Micro USB convertor' to the socket then you will also get the NaviPanel. Not sure if it is a good thing though because it annoys the hell out of me, not being able to access my Emails etc very easily. Of course I would not be driving at the same time as playing with the phone anyway.
Same happens when you just plug-in in the hd2 a microusb-to-female-usb adaptor (ment for nokia n85?) which i had bought to test (without success) some usb-host drivers mentioned somewhere in this forum.
I can add that it is possible to disable navipanel autostart (i did it but don't recall now exactly were among settings) and after that (obviously in my case using an additional usb/microusb adapter) the connection is fully functional as an usual cable.
wibberly said:
I can confirm that if you connect a 'Motorola Mini-USB to Micro USB convertor' to the socket then you will also get the NaviPanel. Not sure if it is a good thing though because it annoys the hell out of me, not being able to access my Emails etc very easily. Of course I would not be driving at the same time as playing with the phone anyway.
Click to expand...
Click to collapse
I have the same motorola conventor and the same problem. I just tried other charger and navipanel doesn't start.
so, if i read you all correctly, to activate navipanel electronically, ground pin 4 (not usually used)?
navipanel blues
does anyone know how to completely cauterise navipanel...? when using my hd2 as a usb drive the lead (as supplied with the phone!) makes the unit think its in the car.... zzz and vice versa
Hi,
I have a Z3 Compact with a broken screen. It displays everything all right, but the touch is pretty much dead. Shame, I loved that phone.
Thus I am looking for interesting ways to make it useful again. It runs Android 6.0.1 right now.
I have an OTG connector, so I am still able to use the device with an USB mouse - BT controller is an option as well. My most basic options are:
- emulation-handheld for old consoles like PSX and SNES
- PC Camera (with apps like DroidCam, IP Webcam)
But before that my most basic question would be:
Will I be able to use the mouse after reseting the device to factory settings? Seems like the easiest way to clear all the data.
Also, I know there are unofficial Android ROMs available - is it possible to install and use them without the touchscreen, only with USB mouse?
And now to some wishful thinking...
Are there any Linux roms for Z3C akin to Raspbian for Raspberry Pie? Z3C most likely has enough power to act as a simple desktop PC for internet and youtube, it also has peripherals (was it called MHL?) to connect it to a monitor via HDMI that should be dirt cheap by now (the question is, is it still possible to connect K&M at the same time? Is USB-hub enough?), so... maybe?
Any other ideas are welcome!
*useful, my bad
A handy accessory
torrentius said:
Hi,
I have a Z3 Compact with a broken screen. It displays everything all right, but the touch is pretty much dead. Shame, I loved that phone.
Thus I am looking for interesting ways to make it useful again. It runs Android 6.0.1 right now.
I have an OTG connector, so I am still able to use the device with an USB mouse - BT controller is an option as well. My most basic options are:
- emulation-handheld for old consoles like PSX and SNES
- PC Camera (with apps like DroidCam, IP Webcam)
But before that my most basic question would be:
Will I be able to use the mouse after reseting the device to factory settings? Seems like the easiest way to clear all the data.
Also, I know there are unofficial Android ROMs available - is it possible to install and use them without the touchscreen, only with USB mouse?
And now to some wishful thinking...
Are there any Linux roms for Z3C akin to Raspbian for Raspberry Pie? Z3C most likely has enough power to act as a simple desktop PC for internet and youtube, it also has peripherals (was it called MHL?) to connect it to a monitor via HDMI that should be dirt cheap by now (the question is, is it still possible to connect K&M at the same time? Is USB-hub enough?), so... maybe?
Any other ideas are welcome!
*useful, my bad
Click to expand...
Click to collapse
Make sure you have one of the magnetic charging cables so you can at least keep the mouse plugged in at all times AND keep the battery charged Keyboard & mouse possible IF you use something like the OLDER Logitech models with the proprietary dongle. The newer "unified" stuff won't work. BT keyboard / mouse too sluggish in my experience. If you are feeling courageous, and especially if you don't need it as a daily driver, a replacement screen is something like 25 dollars USD on eBay - get the one with a frame unless you are experienced in replacing screens - the replacement screen only units are somewhat FRAGILE.
nezlek said:
Make sure you have one of the magnetic charging cables so you can at least keep the mouse plugged in at all times AND keep the battery charged Keyboard & mouse possible IF you use something like the OLDER Logitech models with the proprietary dongle. The newer "unified" stuff won't work. BT keyboard / mouse too sluggish in my experience. If you are feeling courageous, and especially if you don't need it as a daily driver, a replacement screen is something like 25 dollars USD on eBay - get the one with a frame unless you are experienced in replacing screens - the replacement screen only units are somewhat FRAGILE.
Click to expand...
Click to collapse
Thanks, Nezlek! [I pozdrawiam współ-Warszawiaka! ]
Fortunately I have the magnetic cable, so no worries there. I wasn't planning on replacing the screen, definitely not that courageous. I loved that phone, but I am just not good with tinkering inside of small electronic devices. That is why I was thinking about ways of using it with other input tools like OTG mouse or BT controler. Right now I am thinking about getting a MHL cable for HDMI output and giving it with a BT gamepad to my friends kids with some games loaded. I have no other ideas, sadly.
Do you happen to know if OTG works right away after full-reseting the devicse? This is my main concern now.
Good Question ......
torrentius said:
Thanks, Nezlek! [I pozdrawiam współ-Warszawiaka! ]
Fortunately I have the magnetic cable, so no worries there. I wasn't planning on replacing the screen, definitely not that courageous. I loved that phone, but I am just not good with tinkering inside of small electronic devices. That is why I was thinking about ways of using it with other input tools like OTG mouse or BT controler. Right now I am thinking about getting a MHL cable for HDMI output and giving it with a BT gamepad to my friends kids with some games loaded. I have no other ideas, sadly.
Do you happen to know if OTG works right away after full-reseting the devicse? This is my main concern now.
Click to expand...
Click to collapse
I assume that OTG would work right after a re-set. Why not? The support is built into the ROM. As for the MHL cable, another good idea, but you could just as easily screen cast, no? But, for 5 U$D, or 18 zł PLN (take your pick) an MHL cable is a "worth it" experiment. And, if you're feeling adventurous
https://www.ifixit.com/Guide/Sony+Xperia+Z3+Compact+LCD+Screen+Replacement/35488
From personal experience, the only real issues with the Z3C are that the LCD panel is held in place by adhesive, so you have to position those templates rather precisely, OR use glue :crying: OR double-sided tape AND, you have to be CAREFUL re-positioning the speaker. Caution and patience is all you need.
raz kozie śmierć