Related
Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it
Hi all,
Im new to this Universal forum since i recently got my MDA PRO ( Universal or JASJAR) from ERA mobiles-Poland. I have a few questions and would appreciate if anyone of you masters could answer them for me.
1. Firstly why do all the programs work so slowly??? I assumed that adding some new softwares slowed the system down but did a hard reset and found that there was hardly any improvement. i previously owned a Himalaya and it was much faster with the same software as in the MDA PRO. How can i change this and make more memory for running applications??
2. Is there an option where i could answer a call via the speakers by just lifting the screen of the phone?? i often answer a call with the hood closed and have to open the hood and press the "Speaker On" function before i can use the function. Im not sure if anyone has had this thought and a solution has been found.
3. I managed to download the new ROM from this forum and tried to update it on my machine but got an error " Invalid device" - Kindly contact your operator for the right update. my question is how can I update to a new ROM when running the maching with an excisting one? my device is from an operator in Poland but i would like to upgrade to a new ROM.
4. Lastly is it true that updating the device to a new ROM will increase memory and effeciency of the device or is a ROM update only developed for certain regional functions and software setting??
5. My last question is on my device desktop i can see 8 unread emails. when i select this the machine totally hangs and i have to do a soft reset. is there some way i can change this and reset the problem. Also can anyone tell me how to uninstall a email account once it is created?
my device information is :
ROM Version : 1.20.37 WWE
ROM Date : 12/04/05
Radio Version : ------ ( No information)
Protocol Version : ------ ( No Information)
ExtROM Version : 1.20.129 WWE
Hope to hear a reply soon as i am dying to make a few changes.
Venk
1. to fix most of your problems, upgrade your ROM.
2. Might be better to get a bluetooth headset. Preferably stereo one if you listen to music.
3. If it doesn't belong to the maker of your device (like you bought a QTEK and wanna flash an IMATE ROM) go to the wiki.xda-developers.com It is all explained there.
4. Increased efficiency. Maybe better memory handling but not necessarily more memory.
5. Upgrade the ROM and it will erase everything, even the 8 emails. Just make sure they are not there when you synchronize. Maybe the rom update will help.
P.S. Your ROM is almost 1 YEAR OLD!!!!! Pls. upgrade.
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
trapper said:
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
Click to expand...
Click to collapse
What Unlocking program? For Country ID Errors, there is a topic on this, PLEASE USE THE SEARCH BUTTON!
Hint: Use MaUpgradeUT_NoID.exe
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
I have a Dopod C858 that is from China. It currently has the Chinese version of Windows Mobile 5.0 and I am looking for an English upgrade to Windows Mobile 6.0. I tried using the RUU for the HTC P4350 but it came up as a Model ID Error and I couldn't continue. I tried doing a CID Unlock using IMEI check but they don't support the Dopod C858. Does anyone have any ideas? Oh and one more thing. Currently, the Comm Manager on my Dopod does not have the WiFi option. I noticed after I did a hard reset that when it was loading the .cab for Comm Manager, it displayed something like no_wifi.cab. Did Dopod Asia purposely disable Wifi?
EDIT: I contacted IMEI Check and they helped me out by enabling my IMEI. My device is now supposedly "CID Unlocked."
QQ group 33128089
Any luck with finding this via QQ? I have the same need...
Here is what I did: I CID Unlocked my phone using IMEI Check and downloaded the DOPOD Rom file located here. After that follow these directions and you should have an english rom:
Tools you need:
==============- HexWorkshop from here
- the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
===========a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use:
"Extract files to folder ..." from conext menu Now it will unpack all
the
files
c) in the new folder you will have ONE file like "HRUU_signed.NBH"
(*.NBH)
RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from
context menu
d) You'll see on the 5th row HERA10000
==!!! make it HERA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex
Workshop" from conext menu
Search for text "BsaD5SeoA" (without quotes, case sensitive)
OVERWRITE "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the
file
ROM-Update:
==========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker **
4) After phone is unlocked run unlocker (again) BUT when the unlocker
ask
for UNL file, remove the USB cable from the phone THEN press "Cancel"
on the
unlocker select file window (unlocker will close on PC). NOTE: The
screen on
the device will not show something usefull when in this mode. Most
probably
it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like
it
is!
5) After you closed the unlocker, attach usb cable again (phone has
still
white screen)
6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message:
"Data Crashed, contact service provider" (-*!NO PANIC!*-)
==Simply fix this problem by running the unlocker again and this time
select the key file normal way (full unlock process again).
The only problem is that the ROM is WM5 and there is still no Wifi.
Credit goes out to the IMEI-Check Team who provided me with the instructions!
Great, thanks for the info.
One question -- can you use the steps outlined to upgrade to WM6?
I was able to install WM6 before, using "aserg way", but the radio didn't work b/c the radio rom was not updated as part of the flashing process.
The way I understand it, if I can unlock my device and use the process you listed, I should be able to use a RRU which has an updated radio rom. After that, I should be able to sucessfully update to wm6.
What do u think?
I tried flashing a couple of WM6 roms but both of them didn't work. One stopped at 2% (Invalid Model ID) and the other one gave me an "Invalid Command." I currently have radio version 2.71.90, do you think it will work with WM6? If so, can u provide me with instructions on how to flash to WM6 using the aserg method?
Last time I tried upgrading to WM6, I found a cooked rom posted on this forum, and used 'aserg's' method to update it w/o updating the radio rom.
The method basically involves using a tool called 'awizard' along with a few other small utilities. The instructions should be easy to find on the forum here, let me know if you can't find them.
But before you do that, verify your radio is up to date. There is a minimum radio version you need to have (a search for radio rom on the windows mobile 6 forum should turn it up) before you can fully use a wm6 rom. The only known way to update the radio rom is to install an RRU package (which it seems like you've been able to do).
Currently, I'm waiting for my purchase & id to be validated with IMEI check.
Once that's done, I'll start with the steps you listed and try to get my radio rom up to date. After that, I'll select a rom, and do whatever it takes to get the rom installed.
I'll record all the steps I take as I do it, and post my results.
Don't worry -- I won't waste any time here, I've been waiting to update my device for a long time.
i'll be waiting right here. good luck!
oh and another thing, i am currently using this rom (ROM ver. 1.8.405.1). it gives you radio version 2.71.90.
It appears we need to find an RRU which includes a radio rom of 2.79 or higher.
We both currently have radio roms at 2.71.90, which is not good good enough for WM6.
I'm guessing we could use one of the posted upgrades (look in list of available official shipped rom's) and upgrade, even if we can't find one in english.
Afterwards we should be able to upgrade to wm6 of the appropriate langauge.
i read somewhere that one of the german ones has an updated radio rom. would you be volunteering to try first?
Yah, I found a few RRU's which contain a 2.79 version of the radio. I still need to wait for IMEI to verify me before I can continue with the process though.
btw... what time zone are you in? (I also bought my device in China, I live in Shanghai right now)
i'm in shanghai right now too!
i'm wondering if you can answer this for me. i don't know why some roms work and others don't. I currently have ROM version 1.8.405.1 WWE. Before that I successfully installed ROM version 1.7.707.3. I tried to install 5.4.405.1 but that didn't work. Am I supposed to install the updates in order of their release?
The order shouldn't matter. But, now I'm concerned -- because 5.4.405.1..etc is precisely the way to upgrdade to wm6 (since it has the 2.79 radio rom).
How did that update fail? Did you try updating after first unlocking your phone, or did your failure happen before you unlocked?
it gives me this after i try to upgrade: ERROR [300] : INVALID UPDATE TOOL
I've tried the steps you outlined above against several different roms... I get "invalid command" at 2% every time.
How frustrating... I'm guessing the steps IMEIcheck provided to update the 'updater' don't work with roms newer than a certain version.
Can you ask your contact there if they can provide updated steps which work with newer roms?
Seriously... i just paid like 40 bucks to unlock my phone.
I was _already_ running an english rom after flashing using aserg's way (an older htc wwe release), so I'm failing to see any advantage to having cid unlocked my phone.
I don't want to give up... I've already spent contless hours trying to figure out how to get past every minor error...
i'm in the same boat as you dude. this rom worked for me, but again, its version 1.8.405.1. None of the newer ones work. I just emailed my contact and i guess we can only wait and see what he can come up with. Another thing, have you enabled wifi on your device? I have a wifi button on my Comm Manager but when I tap it it tries to launch but then nothing happens. I read about a registry edit to fix this but my registry was different.
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards