Related
if your atom can't turn on (not respond when pressing power button and just orange LED blip) because 0% battery, ext
do this step
1. press and hold (camera button) + (rec button) then (power button) in same time
2. it show MNX Diagnosis Manager
(D) Pure Diagnostic Mode
(B) Blutooth Test Mode
(G) GSM Test Mode
(U) Disable DM
3. Select (G) by pressing rigt/left key, then press enter (center d-pad)
4. it show : InitializingThe GSM Module,
wait a few second
5. If it show:
********************
****Initialize GSM OK****
********************
press reset button in bottom
you can test your device without Self Diagnosis with Pure Diagnosis Mode (D)
my battery crashed, so i always do this step to turn on with charger cable
i get this once but i cant press enter
enter=center d-pad
ya taht i know but nothing happen..now it show mn1 boot loader what to do
beng46 said:
ya taht i know but nothing happen..now it show mn1 boot loader what to do
Click to expand...
Click to collapse
don't insert miniSD card...
I tried
"press and hold (camera button) + (rec button) then (power button) in same time"
but nothing happens. I still cannot get the screen to turn on.
Can anybody please give me some extra information about what could be done to turn on my device ?
Thanks
this was VERY HELPFUL!! my 02 atom pure's battery wont open 2 weeks ago, then my back-up battery experienced the same thing today. i did the steps below and it activated my 02 phone
but i dont know why this problem occurred.... can anyone explain why it happen?
all of a sudden, my 02 phone wont open anymore after i charged it.
adhisip said:
if your atom can't turn on (not respond when pressing power button and just orange LED blip) because 0% battery, ext
do this step
1. press and hold (camera button) + (rec button) then (power button) in same time
2. it show MNX Diagnosis Manager
(D) Pure Diagnostic Mode
(B) Blutooth Test Mode
(G) GSM Test Mode
(U) Disable DM
3. Select (G) by pressing rigt/left key, then press enter (center d-pad)
4. it show : InitializingThe GSM Module,
wait a few second
5. If it show:
********************
****Initialize GSM OK****
********************
press reset button in bottom
you can test your device without Self Diagnosis with Pure Diagnosis Mode (D)
my battery crashed, so i always do this step to turn on with charger cable
Click to expand...
Click to collapse
Is that really working? Nothing happend on mine ...
If u'r atom cant turn on :
Press and hold camera button, realese battery then plug again. (camera stiil pressed)... wait untill something show on the screen....
perhaps it will help, as my experience....
My atom did not run in to bootloader mode
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
just black screen
after loading wm 6.5 only the screen appear black just black nothing else what to do any suggestion
hey,
i need to send my hd2 back for repair but unfortunately i can't get into the bootloader! volume up / down buttons do work when im in windows mobile, but when the phone is switched off, i press volume down + power button once and the phone just boots into windows mobile.
is there any other way to restore your phone to the stock spl?
You need to press Vol UP and PowerOn, not Vol Down
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
tried that too, unfortunately not working ...
skycamefalling said:
You need to press Vol UP and PowerOn, not Vol Down
Click to expand...
Click to collapse
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
JayVee said:
On my device it is PowerOn and VolDown. But I have to press and hold the VolDown button till the device is in bootloader mode.
Best regards
Click to expand...
Click to collapse
Sorry then, Vol UP has been my other phone I haven't flashed the HD2 via SD Card yet.
I just can think that you do not press the Vol DOWN button hard enough or long enough. You have to press and hold the Vol DOWN button and switch on the phone, then lift the power button while still holding the Vol DOWN button.
Hi all
wacky.banana said:
Pitchbend,
Taken from one of the many tutorials on here...
"*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear)".
Do make sure you are pressing the volume down button hard enough AND for long enough.
Cheers
WB
Click to expand...
Click to collapse
pitchbend said:
tried it but still doesnt go into bootloader mode... i have managed to go into bootloader mode before (with several htc phones i have owned), but i think something is broken this time (my hardware sendbutton also is not working any more, that is the reason why i need to return the phone).
Click to expand...
Click to collapse
This what I do to go into bootloader mod in my HTC HD2 Leo :
Press together VOLUME DOWN & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen appeared
add ; 4 all ; if for any reason while you are in bootloader - tri-coloured mod - and want to go back to normal ,
just press RESET RED BUTTON , your device will reset .
hope this will help . . .
meptik said:
Try running the attached EnterBootloader.exe from your HD2 (unzip, move .exe to phone, run).
Click to expand...
Click to collapse
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no change for warranty any more .
Click to expand...
Click to collapse
Hmm, very weird.
The actual keys are obviously ok - they're just not handled while in bootloader. I'm not sure what exactly is responsible for that, I assume it's not the OS, so perhaps SPL or Radio?
Not sure if it would make any difference, but perhaps you can try reflashing the HSPL (or maybe a different radio?).
pitchbend said:
thank you, with this file it went into bootloader mode, but somehow my hardware-buttons seem to be broken (in win mobile all of them beside the send-button work), when it says "Press power buutton to start update image", I press the power button, but nothing happens!
I guess thats it, no chance to restore SPL and no chance for warranty any more .
Click to expand...
Click to collapse
when its asking to install the rom (in bootloader) hold down volume up (or whatever key it asks you to press to install) REALLY HARD,
another suggestion, take off the back, the buttons seem easier to press when the back battery cover it off
maybe this will work
1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.
Ooops!
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
g3k said:
If your power button does not work it will be impossible to flash from SD card and this is the only way top reflash a stock rom = the only way to uninstall HSPL.
But if this is the power button, then how do you already power up your device ??? Is this your reason to send it to the repair?
You seem stuck in a button my friend...
Click to expand...
Click to collapse
it is a real wierd problem, i can switch the phone on with the power button and when it is turned on, all keys work beside the talk(send) button. but i can not go into bootloader mode and power button / volume down button to confirm / cancel update when entering bootloader mode with bootloader.exe don't work.
you should really try to reflash radio and hspl again. if you can power on the device the hardwarebutton must work. looks like a software problem...
have you check that you vol down button is working? it happen to me before,
maybe you could contact the hspl maker if he can help you? i have in my mind that he could "hack" the procedure to NOT ask for SEND key press?
Thanks for all your replies. I left the phone off for about 4 hours charging. I switched it on press the vol down button and it worked! How weird / lucky. So I flashed a new rom and I am working again.
Thank you so much for you time.
One last thing though, now in WinMo the vol up and vol down work and the power button work. But the other 4 hardware keys don't, they just force the phone into vibrate/silent mode. When I get a phone call it also turns the volume down/off/vibrate.
Maybe a hardware failure?
Matt
Hi,
I have 1 htc blac100 phone lock password,
I tried by pressing volume up and down + power buttom but it shows USb menu like this in image
I can't understand where's the problem is, might be my volume up buttom is not working!?
any other solution without disassembling the phone,
how to update/ flash the phone
any solution,
thanks for help
br,
riteshgpt60 said:
Hi,
I have 1 htc blac100 phone lock password,
I tried by pressing volume up and down + power buttom but it shows USb menu like this in image
I can't understand where's the problem is, might be my volume up buttom is not working!?
any other solution without disassembling the phone,
how to update/ flash the phone
any solution,
thanks for help
br,
Click to expand...
Click to collapse
press both vol+ and vol- and power
it will work
karikari said:
press both vol+ and vol- and power
it will work
Click to expand...
Click to collapse
yes 100% working tested by me
WBr
[email protected]$!M @}{[email protected]
I ask touched dell streak camera key did not respond in Recovery Mode, but after shutdown, press and hold Power + Camera, you can enter the Fastboot mode ..... only in the Recovery the mode, the Camera the key did not respond ...
Sorry my English is not good, is Google Translate, hope everyone can understand Orz ....
will not respond at all if your 5treak is shut down/off.
try this : turn on, when dell logo appear - quickly press& hold camera button (fastboot) or vol -+ button ( recovery)
ivantastic said:
will not respond at all if your 5treak is shut down/off.
try this : turn on, when dell logo appear - quickly press& hold camera button (fastboot) or vol -+ button ( recovery)
Click to expand...
Click to collapse
In fact, my situation is in Recovery Mode, you can use the volume + / - move option, but press the Camera Key, but can not the select, but the Camera Key failure .... do not know that there is no one touched sothe case
Lyz said:
In fact, my situation is in Recovery Mode, you can use the volume + / - move option, but press the Camera Key, but can not the select, but the Camera Key failure .... do not know that there is no one touched sothe case
Click to expand...
Click to collapse
you use the soft button menu (middle) key to select in recovery, and soft button back to go back
hope it helps
asianftw said:
you use the soft button menu (middle) key to select in recovery, and soft button back to go back
hope it helps
Click to expand...
Click to collapse
menu (middle) key can not be selected .... if that is in this mode, lose the selected function first run into this the Dell ......
Hi guys.
My phone after installing a rom, maybe corrupted, does not enter into emergency mode or recovery mode or PC Suite USB mode.
There is some more method install another rom?
(my phone is a LG optimus L7)
continuation of a good job guys
Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)
raul338 said:
Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)
Click to expand...
Click to collapse
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.
kadekz said:
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.
Click to expand...
Click to collapse
Then search for a downgrade kdz here in the forums
raul338 said:
Then search for a downgrade kdz here in the forums
Click to expand...
Click to collapse
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s
kadekz said:
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s
Click to expand...
Click to collapse
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?
raul338 said:
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?
Click to expand...
Click to collapse
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x
kadekz said:
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x
Click to expand...
Click to collapse
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck
vashminted said:
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck
Click to expand...
Click to collapse
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone
kadekz said:
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone
Click to expand...
Click to collapse
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc
vashminted said:
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc
Click to expand...
Click to collapse
That is the problem, not enter the emergency mode. : s
Already tried it, until with two combinations of keys but does not work, do not understand: (
I'm having the same exact problem. Early in mornign I flashed a rom with cwm and didnt like it at all. Then I flash the homer v20 with KDZ and now it does not boot, neither the emergency mode works as I install it with that mode.
dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same
hassan216 said:
dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same
Click to expand...
Click to collapse
I already tried all the possible combinations of keys to wake up the smartphone but it does not work neither. That's the bigger problem: (
But thanks anyway for the tip.
there is no solution exists?
Final solution is emergency or download mode. if u can not enter it, u shoud take it to service center as soon as possible