Database Users

Big problem

Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....

might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!

jup.both things NOT HELPED

looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San

can you please write me a procedure?

You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725

i am trying to download files but i get permission denied all the time

You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb

I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?

Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks

Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S

Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!

1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.

Magician: turn on only in bootloader, can't be flashed

Please, help me in the following situation
I bought Qtek s100 It turns on only in bootloader mode. What was before I don't know.
Now I try to reflash it via PC. I unpacked rom 1.12 from imate and put there file MaUpgradeUt_noID.exe and then ran it. The utility can't see the device information (it is normal) but it can't see the informatin about the rom I'd like to flash. I click @[email protected] but it says it gather information about the device and nothing happened.
I tried to run again about 20 times, but nothing helped.
I tried to flash it via card using rom-image but there is no invitation to reflash though I flashed via card more than 20 times other htc devices and then everything was ok.
I ran mtty 1.42 and gave command d2s, but it said unknown command. Then I gave d2s command then the device turned off.
I have qtek s110 with broken display. Is it possible to change rom-memory?
Is it possible to get service_manual for magician?
Thanks

First of all, did you back up your current ROM to SD before Flashing new ROM.
1. Yes. It's VERY GOOD. Disconnect your device from PC. You need to insert SD with your ROM to the device and Turn On. Press Power or Cancel button (i didn't realy remeber try all). After that device will flash ROM form SD.
2. No. It's VERY BAD. You need to know start address form what device should start after Reset. Sory here i did not know what it is.

Ñïàñèáî çà ïîìîùü!
Ñóòü â òîì, ÷òî àïïàðàò ñ êîìïà øèòüñÿ íàïðî÷ü îòêàçûâàëñÿ. Ïîïðîáîâàë øèòü îáðàçîì ÷åðåç êàðòó (îáðàç ñíÿò ñ t-mobile 1.01). Íà îáðàç íèêàêîé ðåàêöèè.
Äàëåå ïðîáîâàë ñíÿòü îáðàç ñ ïðîáëåìíîãî àïïàðàòà. Àïïàðàò âûêëþ÷àåòñÿ. Åñëè ñ mtty äàòü êîìàíäó øèòüñÿ s2d, òî mtty ãîâîðèò, ÷òî êîìàíäà íåïðàâèëüíàÿ

Hi,
Read this http://forum.xda-developers.com/viewtopic.php?t=46628 about the SD flash
M

thanks, but te problem is the device doesn't want to work with card. No reaction on the card with rom-image, turning off when typing d2s

Don't know where you bought & how much you paid for it (sure hope it's less then a new screen), but sir I guess you're scr*w*d.
Maybe you can replace your broken S110 screen with the one from the S100. There's a rar file on the board, with a detailed description & pictures on howto disassemble your magician, think it's called disassembly.rar.
EDIT You can find it here http://forum.xda-developers.com/viewtopic.php?t=44841
M

thanks, but I think the screen is alive, it shows usb or serial and etc.
As far as i know, there is some diagnostic tests to understand where is the problem. how to activate it?

Diagnostics
Sorry I don't know of a diagnostics test. But you can have a bootloader without a working rom. Since you bought the S100 in a bootloader state, that's very suspicious to me. & that's why I advised you to replace the broken screen on your S110 with the one from your S100.
Hope you can sort it out & if you happen to run across a diag. pls update the wiki with it.
Regards, M

INSTALL HARD-SPL from micro-SD?

Is there a way to install HARDP-SPL from the micro SD card? I am able to flash any rom from my SD-Card, but I am no longer able to connect my Polaris to active sync. Get an error "USB Device not recognized" and I am not able to get synched. Now I have flashed several different rom's and also different radios, that works from the micro sd card. but I am still not able to connect with active sync. When I enter the bootloader mode then I just see that message "POLA100 MFG SPL-2.20.OliNex CPLD-2" So I guess the Hard-SPL is missing. Home I will get some help ;-)

If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!

Thanks for your answer, didn't know that. However, I am not able to connect to active sync even though I have tried different ROM's and different Radios also, flashed from SD-card. Still no connection to activesync :-(

I have the exact same problem for almost a year now, flashing all roms with the micro sd card... and living without active sync :S
Hope someone can help us here

maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!

ouioui01 said:
maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!
Click to expand...
Click to collapse
1- the USB cable can't be the problem, already tried a different one, plus using my Touch pro with the same cable on the same computer
2- the pins, I don't know, they look good for what I can tell and it is strange because the phone will be charged with the usb cable
wish I would find a solution.....

fktsndr said:
If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!
Click to expand...
Click to collapse
Can you dumb that down a bit? I don't have access to a windows computer, so I have to rely on the microSD. Is there a way to Hard-SPL the phone with the SD card? I performed a Hard-SPL on my Wing when I first got it, but I think it was an older out-dated version, cuz I get an "Invalid Certificate" error when trying to flash from my microSD.
Thanks,
-Adam

easy solution which I found
If you first install the .nbh file of the .72 stock spl using the micro sd card, then your device will not boot into the OS. Now run the Sony Ericsson update utility (which you can download from their website) and run it. It will try to upgrade the system through usb. After different steps, this software will ask you to reinstall the OS (the spl should match first) and then you can reinstall the stock spl and you are back to square one. Now from here, you can now go anywhere you like.
Note: The above method, I tried it myself and it worked. It might not work for everyone hence use it at your own risk. But if you have a bricked device, then there is nothing to lose.

[Q] HP IPAQ 614c PC activesync, connection problem

Hello all,
I have HP IPAQ 614c and i can't connect this phone with any pc or any USB cable. I get message unknown drivers... Maybe someone knows what the problem it is ? I wana install normaly ROM and firmware, but i can't connect my phone to pc... Thanks a lot who will help me to fix it...

I have the same problem with my iPAQ 914c... But, i can intall a new ROM with a external SD Card.

You can install ? I can install too ROM from HP web. But how to update Firmware without USB ? So i need connect my phone to update it... Ehh... Bored of seaches...

Yes, I can install it
Instructions for flashing (extrated from: http://forum.xda-developers.com/showthread.php?t=800558):
Download de firmware. Decompress it and you have the .dio file. Put this file into a less than 2 gb sd (sdhc won't work) and put your device in sdloader mode. This happens pressing together volumeup + ok and pressing reset releasing the two vol and ok buttons. After doing this, the device checks the file integrity, flash to your device rom and do a clean reboot. When is finished, it ahould autoreset, but if not, it will show a black screen for a long time. Is then when it has finished, so then make a reset and your device will have installed the ROM

How to update flash.dio i know. I Need english version. I have updated OS. But how to update FW ? Becouse now mine is 0.81 version. And then i upload original flash.dio from HP hexeded file. Phone installing one this file from 6 files. Like i see on screen phone, missing 5 files to install... Sorry for bad english, but i think you will understand me what i mean...
On phone i have some bugs, like xt9 in SMS mode. And bug in contacts. Can't seach contact by name, i can put only numbers there to seach. GPS not work. And other little bugs.
But main problem is how to activesync this phone ? Why PC can't find phone ( device ). Tryed anything. Different PC, different windows. Different cables. Can't find solution for it... I think must be way to find problem. HP agents can't help me, becouse warranty ended, heh. They just told me what phone port for cable can be out of working. But phone charging working well...

So who gona help me ?...

Is it possible upgrade and activesync by bluetooth ?

DeFuSeGM said:
Is it possible upgrade and activesync by bluetooth ?
Click to expand...
Click to collapse
DeFuSeGM, you are able to activesync by bluetooth, just follow the activesync help topic under connection using bluetooth. Starting i got a lot problem to setup and took me quite a while to get it solve out. U can try it.
BTW, anyone can share how fast is your bluetooth phone to phone transfer rate. Mine is only 50kb/s, seem like quite slow compare to other phone i used to use.
Thanks

And how about if i can't open bluetooth meniu in phone ? USB dont work, bluetooth dont work, with SDLOADER can't upgrade... Phone dead ? Or any way to delete wrong ROM from phone without connecting it to pc ? I need faster help...

I had the same problem on my 614c, I opened the device and re soldered the usb connector. Haven't had any problem since that.
But it requires good soldering skills.

DeFuSeGM said:
And how about if i can't open bluetooth meniu in phone ? USB dont work, bluetooth dont work, with SDLOADER can't upgrade... Phone dead ? Or any way to delete wrong ROM from phone without connecting it to pc ? I need faster help...
Click to expand...
Click to collapse
if you want to Automatically connect through ActiveSync bluetooth , you'd better learn it at http://forum.xda-developers.com/showthread.php?t=530327

Lasker1 said:
I had the same problem on my 614c, I opened the device and re soldered the usb connector. Haven't had any problem since that.
But it requires good soldering skills.
Click to expand...
Click to collapse
Okey, ill try to resold connectors.

Hakim Rahman said:
if you want to Automatically connect through ActiveSync bluetooth , you'd better learn it at http://forum.xda-developers.com/showthread.php?t=530327
Click to expand...
Click to collapse
In phone installed wrong OS. So i can't turn on bluetooth... Screen just blinking, thats all...

Can someone make picture of sync cable ? Maybe i have wrong usb cable. Becouse repairman sayd what anything with phone okey. Seems i need get corect cable. Thanks

Have changed main board and anything was okey with phone. Seems if USB dont work, you need change main board or try load ROM by SD card. But in my way i was stuck on that.

DeFuSeGM said:
Can someone make picture of sync cable ? Maybe i have wrong usb cable. Becouse repairman sayd what anything with phone okey. Seems i need get corect cable. Thanks
Click to expand...
Click to collapse
you just look at http://pinouts.ru/CellularPhonesCables/cellphone-usb-cable_pinout.shtml

[Q] HD2 LEO T8585 Clone - bootloader corrupted

I flash this phone with a wrong image, and now only a black screen appear.
Is impossible to make any key combination to get to the "download screen" ?
If I try to connect it via ActiveSync, fail, nor with K3firstAid. The only thing I recognize is the Huawei PC COM port. Appears only slightly illuminating the display, and nothing more.
I pray all the masters of this kind of cell phone to tell me that there is salvation, and if so, let me explain the process the "resurrection". (excuse the Google translation)
Thanks in advance

If it's not a true HTC phone then there is nothing that can be done for it here.

No, not a real HTC, a Chinese copy of it. I've seen on this forum that many people have problems with these phones, so I thought that there is someone who will help me.

nboskic said:
No, not a real HTC, a Chinese copy of it. I've seen on this forum that many people have problems with these phones, so I thought that there is someone who will help me.
Click to expand...
Click to collapse
My guess is that your fake HD2 uses a different bootloader than the real one. Most issues with the HD2 can be undone, so long as the bootloader is intact. Screw up the bootloader and your phone is done for. Also these ROMS are built for the HD2's hardware and drivers. Your phone may look like somewhat like an HD2, but the similarities stop there. Should have bought a real HD2.

Why you want to flash a fake HD2 with a genuine HD2 ROM in the first place is beyond me.......

nboskic said:
I flash this phone with a wrong image, and now only a black screen appear.
Is impossible to make any key combination to get to the "download screen" ?
If I try to connect it via ActiveSync, fail, nor with K3firstAid. The only thing I recognize is the Huawei PC COM port. Appears only slightly illuminating the display, and nothing more.
I pray all the masters of this kind of cell phone to tell me that there is salvation, and if so, let me explain the process the "resurrection". (excuse the Google translation)
Thanks in advance
Click to expand...
Click to collapse
Could you upload a picture of the phone? + a picture of it inside?

I have not upgraded to the real HTC firmware, but with the wrong Chinese ROM, I accidentally made a flash from the model T5353, which does not comply, we reported the error at the 80% upgrade, is that I damaged the boot and communicate with the PC. Now I found the original ROM, all the tools we need to upgrade properly, but we need help to restore the PC communication, how to ActiveSync or any similar applications to recognize? Here are its hardware, you might be helpful:
· Operating system: Windows Mobile 6.5
· CPU: 520MHz Hisilicon-K3
· RAM: 256M, ROM: 256M, extend to 16GB max
· 4.3 inch touch screen, WVGA PX: 480 * 800

nboskic said:
I have not upgraded to the real HTC firmware, but with the wrong Chinese ROM, I accidentally made a flash from the model T5353, which does not comply, we reported the error at the 80% upgrade, is that I damaged the boot and communicate with the PC. Now I found the original ROM, all the tools we need to upgrade properly, but we need help to restore the PC communication, how to ActiveSync or any similar applications to recognize? Here are its hardware, you might be helpful:
· Operating system: Windows Mobile 6.5
· CPU: 520MHz Hisilicon-K3
· RAM: 256M, ROM: 256M, extend to 16GB max
· 4.3 inch touch screen, WVGA PX: 480 * 800
Click to expand...
Click to collapse
You technically don't have an HD2, as the hardware in your phone is COMPLETELY different.
So if you're looking for a definitive answer here, you probably won't get one, as there's very little relation between your phone and the real HD2.

Your pretty much screwed. Only option is to jtag, or move on.

Hello,
Recently I made a wrong flash ROM, and then I managed to turn on the mobile. I'm desperate and I hope you can help. After I returned from service, he could not do anything, I tried something at home. Basically, when I connect to the PC via USB, recognize it as a "new device", then install the IDT, then my PC recognizes it as "Huawei USB COM 1.0, COM port 7. The problem is that it constantly resets, and so at times he appears in the "Device Manager" and loses again. When he somehow managed to stabilize the relationship with the PC, you probably could I make a flash ROM via IDT. The IDT recognizes it, even after it lost 3 seconds. Obviously not a hardware problem.
Thank you so much in advance

cbadk said:
Could you upload a picture of the phone? + a picture of it inside?
Click to expand...
Click to collapse
There are pictures of my cell phone inside, and please if you know the pins for JTAG, mark them, perhaps it can solve the problem. Thank you very much

Hi me too using china clone HD2 same as your.
So i have use the method before you can copy the .bin file into a micro sd card and reboot your HD2 with below step.
1) switch off the phone.
2) format the Micro SD card to fat 32.
3) copy and paste the rom .bin into the card.
4) input the card into the phone.
5) hold volume key -and+ and switch on your phone.
6) i will start to boot into the SD card.

shawnsoc said:
Hi me too using china clone HD2 same as your.
So i have use the method before you can copy the .bin file into a micro sd card and reboot your HD2 with below step.
1) switch off the phone.
2) format the Micro SD card to fat 32.
3) copy and paste the rom .bin into the card.
4) input the card into the phone.
5) hold volume key -and+ and switch on your phone.
6) i will start to boot into the SD card.
Click to expand...
Click to collapse
Can you tell me what the exact name of the *. bin file? I know of that way, but I failed.

nboskic said:
Can you tell me what the exact name of the *. bin file? I know of that way, but I failed.
Click to expand...
Click to collapse
only hold green and red button(answer and disconnec button) and switch on the phone .the phone will restore factory setting without any bin or flash file .

Just buy another clone, OP. I dont think there's enough resource available (other than some xda china portal) to fix an HD2 knock off simply because they dont have the same hardware & software as official HTC ones.