Related
I have the 8525 with WM6 installed. About 1 in 40 times, the End Call option doesn't display that the call ended (on my side). I attempt to still talk to the other person but I can't hear them, though. After about 2 minutes later, it finally ends the connection. I must do a soft reset to temporarily fix it; the only drawback is that the most previous call isn't shown as being made.
About 1 in 80 times, the call attempts to be made, but doesn't connect at all. I try to End Call, but it seems to "freeze" the screen. The "Close screen" seems to help, as in 30 seconds the device finally quits trying to connect.
Another thing I noticed, after the phone freezes, the antenna signal drops to zero and then returns to about 2 - 3 bars of signal, about 5 seconds later. I'm not sure if that is the cause of the phone hanging, or not. Is there any kind of software to resolve this issue? It's really annoying! Thanks for any help!
is that a cooked rom or official? what's your radio version and carrier?
I'm thinking u need a different radio verson...(u must have hardspl to flash another radio version)...
I got the 8525 as a reconditioned from AT&T about 3 weeks ago. It came with WM5, and I had the above calling issues back then too. I then was informed on the boards here to upgrade to WM6, which I downloaded from HTC, via the AT&T website link.
As for programs, I removed the AT&T "bloatware" via the hard reset trick. Later, I installed S2U2, HTC Streaming Media, HTweakC2.1b, and the PTTFix software. One other program on the 8525 is OCN8 -- for my iBlue 737 Bluetooth GPS device. There are no other files that I can recall, except maps, songs, internet .jpgs, and (camera) pictures/videos.
Settings:
ROM Version: 3.62.502.3
ROM Date: 10/11/07
Radio Version: 1.54.07.00
Protocol Version: 32.86u.7020.23H
I do appreciate and try to understand all of the replies that I receive, and I do try to respond within a timely manner. I understand that people are busy and may have other careers as well. However, the thing that makes me pull my hair out is when someone starts to assist my problem, then just ditches the thread after my reply, without so much as an "I'm sorry, but I'm not able to solve your problem" at the minimum! Normally, I give a 48 hour window for the helper or any more helpers to reply before I get frustrated, but it's been way past that timeframe now!
I've noticed that phenomenon on 3 of my prior posts, each are on different subjects. It seems that after the first reply, no one but the original helper responds! If that original helper is busy, or just forgets about the thread, then I'm screwed over.
Sorry to rant, but I tried looking all over the boards for the best Radio program. All I seem to find is best ROMs, but not really Radios. I've seen 2 other Radio programs in signatures, but I'm not sure what one would be best for my purposes. I've seen mention of 1.47.30 & 1.47.00.10 in some members' signatures, but I'm hesitant to just "trial and error" one, for fear it would damage my device. I currently have the WM6 default 1.54.07.00 version, but it freezes up on making some calls and more often on ending a current call.
Anyone else for ideas or opinions on what Radio program to use? Please back up your opinion with facts when possible. I am not an expert on the device, just a new user who is afraid to ruin my investment.
Much thanks to all who read this post and reply to it!
Hi, just saw your thread & did not know U were still hanging....
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48
galaxys said:
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48
Click to expand...
Click to collapse
Thanks for the reply! I will do the hardspl first, then try to install the 1.48.00.00 Radio. I'll report back with details in a day or two.
My current Image Version is 3.62.502.3, and I am attempting to update it to 3.54.255.3.
I keep having errors while trying to install Radio Version 1.48.00.10 to my 8525, after opening RUU_Inside.exe on my laptop. I've even tried to install it from my microSD card, but I get the tri-color screen instead of the white background with text screen, shown in the online example. The 8525 ActiveSyncs to the computer fine, and the screen shows:
"Updating the ROM image on your PDA phone ...
Please do not remove the USB connection from the PDA Phone or launch any program during the update process.
Remember the operation will take about 10 minutes."
As soon as the above grey box pops up, ActiveSync drops after that box appears, then I get the following message:
"Error [260]: CONNECTION"
I've installed Hard-SPL v.7 onto the 8525 already. Not that it seems to make a difference, I believe, but other programs that are on it include: WMXL 8525 Keyboard Fix, S2U2 1.16, Resco Explorer 2008, PTTFix, MunduRadio, & HTweakC 2.1,
not sure, but did a "search" for error 260 & seems to be your pc usb port:
(use xda google search for any questions)
http://forum.xda-developers.com/showthread.php?t=368624
btw, u are using XP & not Vista on u'r pc.
My laptop has XP (Media Center Edition). I did a search as well, but it was dated back to 2007; I wondered if there was a newer fix than the one on that page, as it referenced the prior version of Hard-SPL. From the sounds of it, I have to install WM5 again, change the radio version (which was the only thing I need to adjust, as the voice calls have been a pain since day one), then reinstall all of my programs again.
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.
Well I broke down and went on AT&T's online chat. Sounds like there is no software to install to fix the issue. I hoped the radio version switch would help, but I couldn't get it to install! I guess it's back to the Replacement Depot on Sunday. I should return my device to WM5, which I hope to find the thread for on the board.
If interested, here's the key parts of the conversation:
Me: Hi, my 8525 is giving me trouble making and ending calls. It sometimes hangs, and doesn't quit trying to place the call. Once I reset it, it's fine until I try to end the call, it hangs up the call, but not showing so on my side
AT&T: Can you try hard shocking the phone for me please? A hard shock is taking the battery out while the phone is still powered on, and then power the phone back on once the battery is back in the phone.
Me: I received it as a reconditioned from the AT&T depot in Pittsburgh, PA. About 20 minutes later, it did the same thing, so I upgraded to WM6 and still the same issues
AT&T: If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Is that a common issue?
AT&T: Sometimes it is with at reconditioned phone.
. . .
AT&T does not have an update for the Windows Mobile 6 at this time. However you may check out HTC website at www.htcamerica.net/support/default.html and see if they have an update for this software for this phone.
Me: So it's the phone, not the software?
AT&T: Yes that is correct. There is a defect within the phone that is causing these issues. If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Are you able to explain what causes it that the Device Center doesn't catch it
AT&T: I am not sure what causes this issue.
Me: Like should there be anything done to prevent that from happening?
AT&T: It is hard to tell with reconditioned phones. It may be something that can be fixed and it may not. If the hard shock does not fix this issue and the Device Support cannot, then you will be given another phone.
ohpfan said:
My laptop has XP (Media Center Edition).
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.
Click to expand...
Click to collapse
Ok, your signature is looking good and that is some conversation with good old at&t...bla bla bla
To answer your question above, the chefs cooked roms do not include radio (because everyone around the world uses a different one). But, the Official WM6 rom's do (posted wiki & wm 6 section). So, why don't u flash the official wm6 since u have hardspl now? This in itself may resolve u'r issue (if u don't get the driver pc 260 error)! why would u want to flash wm5?
I was going to return my 8525 to the Service Depot where I got it, is why I mentioned returning it back to WM5 status. However, I wanted to see if it could be fixed by software first, but considering the above online AT&T chat, I am definitely going to get it replaced again. So, I want the 8525 to not show my "3rd party software" to ruin the warranty. I had the 8525 to individually remove the CABs under Remove Programs, and then I did a Clear Memory to default for good measure. Hopefully the Service Depot won't say anything about the device being altered that way.
Oh yea, I am going to get it replaced on Thursday. I will try to get them to give me a new one, not a reconditioned. That is, if there are even any new ones around anymore! It'd be a miracle if they gave me a new 8925 Tilt instead . . . lol I know -- keep dreaming! Wish me luck with a new 8525 though!
Well, I exchanged my current 8525 for another reconditioned one. The repair guy actually asked if I heard of the xda website (for help with my device!), lol!! He didn't go into detail about what this site does, just asked if I heard about it, and I affirmed that I did. Possibly he found traces of programs that changed settings, but he didn't rat me out. He sounded like he was confident that he fixed the phone dialing issues, but gave me a new one "just in case".
As soon as he gave it to me, it booted right up, without the calibration screen. He flat out told me to calibrate it, but it didn't appear. I was trying to see if it would act up with the dialing again, but noticed it didn't save the numbers on my SIM! I then decided to get rid of the bloatware via the Clear Programs and that lead to the calibration screen, finally.
So far it seems to work fine! I made about 6 calls this time and they seem to end properly. There is a slight 30 second or so delay when I press the button with the "red phone symbol" [end call] before the screen lights up again though. Is that normal?
Oh, I've only loaded up S2u2 so far. I will reinsert the others onto my memory card today sometime before work.
Again, so far so good! Only real issue I see is that the ringer volume is very low when the device is in the carrying case I have it in. I will search on here for a ringer volume changer, soon!
Glad U were able to get another phone!
"red phone symbol" [end call] before the screen lights up again though. Is that normal?
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).
galaxys said:
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).
Click to expand...
Click to collapse
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).
ohpfan said:
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction. check in Settings>System>Backlight & Keyboard Backlight.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes. I don't use them, but it should be treated as MMS text.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).
Schaps has a number of Performance, Power, UI settings, etc., but no alarm ringtones. U may not need Since u'r using HTweekC.
Click to expand...
Click to collapse
see info above...
Hi Everyone,
I really hope this hasn't been asked before, I have, of course, tried searching but it's a complicated issue to search for. I posted a similar question in the Q&A thread before I did some more investigating but received no response.
I love my HD2 when it's on top form but it only seems to run like this for a maximum of 24h. After this the memory usage goes up from about 48% to 58% with nothing running and everything responds terrible slowly. The most noticeable/irritating issue is when trying to type a text message. Each key takes about a second to respond and it is so slow that if I type at normal speed it misses all the spaces I type and I end up with just one long garbled word. It is not just this that slows however, it's the entire phone. Navigating tabs in sence, flicking through texts, using and closing applications, scrolling up and down anything, the weather animation, Duttys task manager all become unusable. As soon as I soft reset it's fine again.
Incidentally the phone behaved exactly the same before I upgraded to the 1.66 Vodafone ROM (from 1.43). I always hoped the ROM upgrade would fix the problem but it did not.
Since posting the original question (where I was suspecting an app or manilla tweak to be the cause) I decided to hard reset and not install anything to see if the issue persisted. It did.
So, has anyone else had this problem. Should I be thinking about sending it back to HTC. I only hard reset this morning and since then have setup email, synced with myphone, setup wireless and setup facebook, twitter and youtube in sence and listened to some music already on my SD card. nothing else. and now it's ridiculously slow again.
Any suggestions would be greatly appreciated.
Thanks everyone.
Murg
It does sound faulty I'm afraid. If a hard reset doesn't fix it then it's probably the device. You could try a custom ROM, but it probably wouldn't fix anything, and then you'd have to flash it back to its original state before sending it away for replacement.
My guess would be to send it back as faulty. Just make sure that it's running slow when you turn it off before sending it back, or they'll most likely turn it on, see no immediate problem and just put the latest ROM on and call it "fixed".
i have the same exept mine was fine on vf 1.43 rom. have hard reset and reflshed but no beter so i asume its the vf rom? keep thinking of flashing custom rom but never done it before
Thanks for the replies so far. i have posted this on the Vodafone eforum and sent it to HTC support so we'll see what they have to say.
Are there any Vodafone stock ROM users on here who defiantly don't have this problem?
I don't want to HSPL my device on account of my warranty. (yes i know you can uninstall it but what what if my buttons break, or my screen becomes unusable for example) cant afford to buy a replacement so I just ain't doing it yet. (as much as I'd like to)
If it is the ROM there is no point sending it back to Vodafone.. does anyone know if I can send a Vodafone device back to HTC themselves?
Many Thanks
Murg
Hi murgers
Im on Vodafone in UK. Have you a cleanRAM -HTC Addicts- app on your HD2? there are others available!
In brackets below taken from info sheet on download of file.
(Release memory for Windows Mobile devices.
Amazing utility which helps you to clean up the wasted RAM memory without having to restart the device and eventually saves a lot of time.)
If you have not tried using a clean RAM app, try search on this forum and try on your phone. It really helps free up anything up to 30 - 40 MB ram at a time
Hope this helps
s
I have received a response from HTC as follows:
Thank you for contacting us.
In regards to the problems you are currently experiencing, it seems that you have a number of software issues here. Therefore, the only thing i can suggest is to book your phone in for repair so we can have a look into this further. You can do this by calling 08458900079 and speaking to one of our HTC representatives.
If a hard reset and a ROM upgrade did not improve the performance of your phone then this is the next best alternative.
Click to expand...
Click to collapse
Sounds like HTC are blaming the Vodafone ROM.
How does returning to HTC work? will i have to pay anything? Do they collect the phone? how long will it take? How can I prove the issue exists, do I send the phone 'on' and whist experiencing the fault?
As said before it's unlikely that sending it back to Vodafone will yield any results.
if you phone htc then they will send someone to yours to pick up the phone in a few days. the whole process takes about a couple weeks and then they ship it back to you
when i sent my phone off for repair i went into a tmobile (my operator) shop and they sent it off for me, and then got a text back when the phone was back, i went back to the shop to pick it up
the whole process took 13 days
this did not solve my problem so i went back to a tmobile shop and am getting a full exhange (swapping for a new phone) on wednesday
hope this helps
its all very simple
Theres a very simple fix... clear your text messages.
This was my issue too which was addressed in another post. When my phone synced with MyPhone, it downloaded thousands of messages and caused major problems. the reason I didn't have issues on my tilt has something to do with sense integration. another option is to disable the sense text messenger app and use the default winmo app.
This is why it works fine for the first 24 hours. When MyPhone syncs overnight and retrieves your texts you get the slowdown.
Hope this helps.
I get this also. Have a t-mobile phone but since flashed it to xannytech, but I still get this.
I had suspected it might be something to do with MyPhone. There a good backup solution I can use that's not this ? Might re-flash and never use it again.
Does the OP use myphone too ?? Might be the common theme...
It's not MyPhone that causes the problem. That simply restores things that you've deleted. If you archive your text message using the MyPhone web interface then they'll be deleted off your phone next time you sync, but they'll still be available online.
That doesn't make any sense. I haven't deleted any text messages. The phone works perfectly quickly, but after a day or so it suddenly starts going really slow. i.e. it takes 30s after pressing 'talk' for the phone to start ringing, typing in messages is slow, the weather goes all stuttery. No programs appear to be running. Restarting the phone fixes it again, but this is pretty annoying.
I had thought it might be myphone or some other service doing something funny in the background. Any way to debug this?
as someone has allready said, i have Cleanram app scheduled to run twice a day and very rarely have an issue. Its all in the background so you dont even notice it running
Ah okay - I thought you were referring to the ongoing discussion and previous talk of how myphone was affecting the OP.
Why don't you just set myphone to sync manually. That way it never does anything in the background. I seriously doubt it's myphone that is causing the problems you have described.
I'd suggest uninstalling apps 1-by-1 to see if the problem suddenly disappears, as it's something that you have installed that's causing the problem. Obviously, if you find the problem still occurs after removing something, you can then reinstall it and move onto the next app.
Will give cleanram a go, though I don't think memory is the problem (always seems to be plenty free when it slows down) - but worth a try!
Not sure it is something installed either, as I don't really have much installed other than myphone, marketplace, google maps and like one game. .... other than of course what came with Xannytech's ROM, but had same issue before and after I put this on anyhow
cheers
Just happened again and tried cleanram, but did not help. It's like something is really hogging the CPU and everything responds slowly, but nothing is running in task manager.
Does anyone know if there is there anyway to show what services are running? Or any other way to debug?
thanks
@rathga
how many text messages are stored on your device?
I have a suspicion that perhaps you didn't grasp what I was saying regarding Myphone.
Hi Rathga - My HD2 does exactly the same thing, with absolutely exactly the same symptoms I've never used myphone though.
I'm on stock O2 (1.43?) and have only really installed TomTom, Hotfixes and Ranster Device Reset (to cope with this issue!)
Often after I keep using it I get prompted to send a debug message to MS with an error in filesys.exe - I'll update this with full details when it happens next
I'm installing this cleanram to see if it helps somehow
rathga said:
Does anyone know if there is there anyway to show what services are running? Or any other way to debug?
thanks
Click to expand...
Click to collapse
Try looking at this thread in the HD2 General forum (sorry can't post links)
'CPU usage is 100% when running Opera'
This was causing me some problems. Clearing the Opera cache certainly seemed to work.
Andy.
Hi,
Don't know if anyone is interested any more or still having this problem but I realised I didn't post a resolution to the problem when I figured out that was causing it.
The Problem was caused by...... Dah Dah Dah.....TEXT MESSAGES.
I had about 1000 text messages shared between the inbox and outbox and apparently this was way too much for the phone to cope with. This really annoyed me as I never had to delete them on my TyNn II (or any other phone I've ever owned for that matter), Iphone and Android users never have to delete them what what is with that!!!.
Sure enough after using MyPhone to 'Archive' the texts the phone sprang back to it speedy old self. Put them back on and Bam... slows to a stop over the course of an hour or so. I don't understand why this happens but I am 100% confident that this was the source of all the problems.
I Still have to archive my texts as I notice it starting to slow down when I reach about 500ish. Very Annoying.
Murg
Try as follows:
Get a junk cleaner and clean all temps
Get SKTools do a Autoclean and switch on all shadow-background services.
This might help to get Your HD2 running smooth as mine for weeks .............
So Im VERY new to this, first Windows Mobile phone. And this is my first post.
Right after receiving my HD2, I was disappointed with my purchase. I loved my Android powered G1, and fell in love with HTC. But when I got my HD2, the texting was terrible, and my phone kept freezing. After talking with a few friends about this, I was referred to this site.
From there, I did some research, and have learned a little bit. I decided to upgrade the ROM to the stock T-Mobile 2.13, through a link I found on this site. At the same time, I loved the interface of the CHT and CHTE, so I loaded those. Also, at the recommendation of Cookie's thread, I loaded Chainfire HD2 3D Driver Patch V2.0.
Well everything feels better, Ive started using Swype, and I havent had any freezing issues. I couldnt be happier...
But I recently notice (I dont do many phone calls, or talking. Im more web, email, and text) my incoming call screen isnt popping up. My phone will ring, I pull the phone out, and I see my home screen, and it is unlocked, like it should be when an incoming call comes through. I start tapping on the screen, and where I tap, icons/buttons start popping up. The "Mute" button, the "Answer/Ignore" bar, and SOMETIMES the caller's ID pic (if Im lucky enough for it to be someone who has a pic).
Now, this doesnt happen ALWAYS, but it does happen here and there. Ive also noticed, that the function that blacks/locks the screen when in call, against your face is running funny.
Does anyone know if this is related to my ROM? The 3D Driver Patch? CHT? Has anyone had anything similar???
I DID do a search, but only in this TMOus HD2 General sub forum. Should I be looking else where? Sorry for such a novel. I just felt that I should provide any possibly necessary info, since Im kind of clueless to this phone modifying world.
TIA.
Hmm...if it were me I'd definitely start with uninstalling that video driver and see if that changes the behavior.
Also, are you using the stock lockscreen or do you have CHT lockscreen enabled via CHTE? If you do have CHT's enabled, then next you might want to switch it off and see if it helps.
I don't know for sure that either of those will resolve that, but that's where I'd start troubleshooting.
After your new rom finished flashing, did you perform a manual hard reset (as recommended by most chefs)?
I've found that there is more chance of the rom being unstable if you dont.
(flashes dont always take first time, no clue why, but i'd estimate about 1 in 10 flashes just isn't stable, yet the next flash with the same rom is stable, , , I've also noted similar results when installing an OS on my PC, , , sometimes it just doesnt wanna take properly.)
theidealone said:
So Im VERY new to this, first Windows Mobile phone. And this is my first post.
Right after receiving my HD2, I was disappointed with my purchase. I loved my Android powered G1, and fell in love with HTC. But when I got my HD2, the texting was terrible, and my phone kept freezing. After talking with a few friends about this, I was referred to this site.
From there, I did some research, and have learned a little bit. I decided to upgrade the ROM to the stock T-Mobile 2.13, through a link I found on this site. At the same time, I loved the interface of the CHT and CHTE, so I loaded those. Also, at the recommendation of Cookie's thread, I loaded Chainfire HD2 3D Driver Patch V2.0.
Well everything feels better, Ive started using Swype, and I havent had any freezing issues. I couldnt be happier...
But I recently notice (I dont do many phone calls, or talking. Im more web, email, and text) my incoming call screen isnt popping up. My phone will ring, I pull the phone out, and I see my home screen, and it is unlocked, like it should be when an incoming call comes through. I start tapping on the screen, and where I tap, icons/buttons start popping up. The "Mute" button, the "Answer/Ignore" bar, and SOMETIMES the caller's ID pic (if Im lucky enough for it to be someone who has a pic).
Now, this doesnt happen ALWAYS, but it does happen here and there. Ive also noticed, that the function that blacks/locks the screen when in call, against your face is running funny.
Does anyone know if this is related to my ROM? The 3D Driver Patch? CHT? Has anyone had anything similar???
I DID do a search, but only in this TMOus HD2 General sub forum. Should I be looking else where? Sorry for such a novel. I just felt that I should provide any possibly necessary info, since Im kind of clueless to this phone modifying world.
TIA.
Click to expand...
Click to collapse
I read somewhere that the "unleaked official ROM" caused more problems than it was worth. I got the 2.13 ROM on the leaked version before it was made official and it has been working great since. I read that they made more changes and then made it official and that it was causing phones to be bricked and most phones ended up worse than they where before the the upgrade. The only "negative" thing i experienced was the screen sensitivity but it appears that the cab featured in the sticky at the top of the post fixed that!? Kinda strange If all else fails Factory Reset and try again. I always like to take a baseline reading. When my phone began acting screwy I would restore and run it stock for a few days to see if problems persisted...then after about three or four days slowly begin installing things...
Thanks for the responses! I will start with sirphunkee's suggestions. As I was typing, I started thinking the Driver Patch was a good possibility. Also, I have noticed that the phone doesnt just "sleep" the screen when I put the phone to my face, it locks. Im assuming this is something to do with CHTE's lock, because as sirphunkee mentioned, I am using the CHTE lock, instead of the stock.
Im going to start there, and see what happens.
Also, I did NOT do a manual hard reset. How would I go about doing so (yes, Im a HUGE noob. More of a car guy)? Im hoping I wont need to do this, as Im assuming I will need to restore all of my contacts, reorganize them, and reset everything else, as if the phone were new out of the box... Correct? But in case that is necessary, how do I do so?
As far as the leaked or official version... I couldnt find it on T-Mobile's site. I read a thread here, where it had been there then removed, due to people having issues with the download. I then was searching Swype or something, same forum, and found another thread, where someone had a link to the download through T-Mobile. Kinda hard to explain, but I will see if I can find the link, and the thread.
Thanks again guys! I really appreciate it. And thanks for taking it easy on me.
I just tried to post the links. I found them in my browser History. But because I have such a new account, I cant post.
theidealone said:
I just tried to post the links. I found them in my browser History. But because I have such a new account, I cant post.
Click to expand...
Click to collapse
Thanks for the effort though, you'll be able to put up links after just a few more posts (it's listed in the forum rules...hint, hint). Also, toreone already threw up a new thread in this section with that link for everybody, so don't sweat that
EDIT: oops, missed the rest of your questions there. The hard-reset is exactly what you said...resets the phone to factory-fresh condition. Yes, contacts will have to be reapplied, but sorting really shouldn't be an issue depending on your method of backing up and restoring them. I highly recommend using the built-in Microsoft Myphone utility for that (and it's wise to let it back them up regularly too, just in case, I just have mine set to do it each night while it's charging).
You can perform a hard-reset a couple of ways:
1. on your settings tab, hit "menu", then "all settings", then "system". You'll find an icon in there titled "clear storage". Run that, use 1234 as the code, and it will do its deed.
2. with the phone powered off, hold both the vol up and down buttons at the same time, and then press the end/power button to turn it back on, then it will take you into the same hard-reset process as the first method.
Since flashing Duttys WM6.5 Leo Holy Grail ROM to my HD I have been very impressed with it's performance, 99% of the time it is responsive and stable and seems happy even though several programs are running. It has made my HD a really nice phone.
But every now and again something weird will happen, usually activesync reports a problem, or all of my contacts vanish, sometimes files on the device (not SD) cannot be accessed. So I soft reset and it doesn't boot, it will get stuck on the orange splash screen.
In total it has happened about 4 times since I flashed the ROM on Dec 29. It happened last night and eventually the device loaded the background picture, then popped up an error dialogue saying something about being unable to open a file, there was no mention of the file name. I did a soft reset and it then automatically performed a hard reset.
The other times the phone just hangs on the orange splash screen every time, causing me to perform a hard reset manually. Sometimes it will work fine for a good few days, or sometimes fail after only 1 day.
Its really annoying. I cant seem to get a HTC that works at the moment. My TP2 is rubbish, I've tried several ROM's and it is consistently unstable, so I go back to my HD which was always reliable... And now this happens.
please Help or I'll be forced to turn to the darkside and get an iphone and I really don't want to do that!
Why not just return to the "reliable" firmware version used previously?
I'm not a fan of custom roms or 6.5, especially on this underpowered model, it's definitely the most reliable handheld I own or have owned with oem roms though, especially without it's resource gobbling pretty face on.
Not really the most helpful answer, but i suppose i cannot argue the reasoning behind it.
In defence of this ROM it is BRILLIANT when it is working, i'd actually argue that the device feels smoother with this ROM than it did with the stock Orange UK ROM.
deejayry said:
Not really the most helpful answer, but i suppose i cannot argue the reasoning behind it.
In defence of this ROM it is BRILLIANT when it is working, i'd actually argue that the device feels smoother with this ROM than it did with the stock Orange UK ROM.
Click to expand...
Click to collapse
Have you tried asking your question in one of Duttys threads. You may get a better response. Also, try flashing a different rom
Thanks.
Since posting the message the problem has not come back.
I have been thinking that there is a possibility that my server was hacked, i noticed a few things had changed on the server, i also had notices when i logged in to facebook and paypal, informing me that someone from New York had accessed my account. the server and facebook used to have the same password.
Is it possible that the problem i had was caused by a hacker on my exchange server issuing a command to reset the device? i know it can do something like this to protect data in the event of a phone going missing.
what does the device do if exchange server performs this routine?
Please help me find this problem... i dont want to buy an Iphone!
Ok I tried a different Rom, this time i used one of KWBR's:
http://media.celogeek.com/roms/kwbr/..._5.7_Sense.rar
a month down the line and its just started to go wrong again.
this time, i find that the device slows down a little bit, prompting me to soft reset, when it boots i find that my contacts are missing, active sync will not load properly, it briefly flashes on screen but lower 1/3rd of active sync window is missing (appears transparent or black) only way to get contacts back and active sync working again is hard reset!
Anyone got any ideas what might be going on?
its been doing this now on both ROM's but i have no idea what may be causing it, as far as additional software i only install a few apps: Slimcontrol 1.5, Core player & GcZ2 (geocaching tool) which all have been running fine before.
Updated to the latest firmware and noticed that they dropped the Never option for screen timeout. I'm kinda pissed because I have been using that for the past week or so and my Live Tiles were doing a much better job with it set to never turn off.
I'm one of the few people around here lucky enough to have a problem free phone. I've never had any of the problems that this new firmware is supposed to fix, so I really don't need it. I am seriously considering rolling back to the old firmware to get the Never setting back. Before I go through all the trouble with that, I just wanted to double check that the the Never setting is gone for everyone with the new firmware.
Does anyone out there with the new firmware still have Never as an option for the screen time out?
Nope, gone for me too. But, I kept mine set to 1 minute anyway.
Oops I posted a new thread before I noticed this. I'm pissed too. I used it with my car stereo and Zune. I used to be able to control music easily at a glance while driving (using cradle). Now it's too much of a process and dangerous. I also liked keeping it on while charging (why do I need a locked phone at home, sitting right next to me, not drawing power from battery?) What genius made this decision!
I have yet to find a single benefit for the new firmware on my phone. Seems exactly the same to me but with the Never option removed. I think I may try rolling it back with the Zune backup.
The Dell tech I spoke with in India actually told me to re-sync the phone, factory reset it and sync it again (at least that's what I think he said, I had to ask him to repeat himself several times as I don't think our English dialects were compatible). I'm afraid to try this. He also offered to send me my third replacement phone if this was unsuccessful. I think I'll just live with it. I'm so tired of dealing with Dell. According to my logs I've clocked in well over 7 hours of phone time with them. I try to remain loyal to Microsoft, but I think it's Android time. I feel so embarrassed when my buddy uses his Evo in my presence.