Lets say I am sick and tired of my 8525 turning off on it's on randomly during the day and I have loaded 10 different roms all the way back to the stock one, I have ran it with NO aftermarket programs, I have replaced the battery, and I have added support to the sim card to make sure it isn't losing contact and still the phone turns off randomly on it's on.
Sometimes I have noticed that it will turn itself off if I slide the keyboard out (maybe 3 times out of 100 turn offs), but 97% of the time it will do it on it's on sitting on the desk untouched.
If I was going to take my phone apart, is there any ideas or general consensus to what parts might be causing the phone to turn itself off? Should I get a new sim card maybe?
Really sick and tired of my buddy with an Iphone throwing this bug in my face telling me what crap HTC is as well as missing calls.
If the phone is turning all the way off, over and over, then send it in for a replacement. If you mean the screen is just turing off after a certain amount of time, you can adjust that under: "Settings->System (tab)->Power->Advanced->then uncheck Turn off device if not used for x minutes. See if that helps, or maybe its just ur phone and you need a replacement. I sent mine in to ATT and got one back after my screen stopped turning on"white screen of death", heh. So it could just be a hardware issue that you cannot really solve urself...
The phone is turning all the way off on it's on. I have to boot it back up like I had just installed a battery or something.
I am out of warranty and do not want to pay for a refurbished phone since this is my third phone from them during the warranty already (and this ones been the best till now). I would rather someone tell me the board/part and I take it apart and fix it myself. I have the tools, the instruction manual in PDF someone posted a while back, a website with almost every internal part for sale, and experience taking small devices apart (ipods and such) and replacing items, I just want to know if anyone knew of which part could most likely be the part causing something like this before I start replacing things blindly. I plan to go ahead and take it apart and check ribbon cables since I want to replace the whole housing anyway.
Unfortunately, my D900 has the same problem with yours, it turned off when i just sending messages or just touching the screen, and my replacement battery is already on the flight, when i get it, i will test it again. Hopeful, i can get a sweat result~~
Mine doesn't seem to do it when it is in use. I have had to get in the habbit of looking at the LED on the phone to make sure it is still turned on. Gets real annoying trying to say the Iphone isn't all that people think, but then have this little problem and the fact I am on my third HTC product in the year time frame. But the others died within 30 days, this one has lasted 10 months thats why I want to keep it.
Well I think I figured it out. I took it apart and it looks like the black box that has the battery connectors to it and is soldered to the main board has broken loose. I am trying to fix it, but does anyone know how much the main board is if I need to replace it?
Related
Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test
Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).
It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.
Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike
I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!
I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.
BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.
jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike
Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike
Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.
yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike
White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers
Okay here's my fun little scenario that I searched for and hadn't come across anyone with the same scenario. Phone was working fine one day and next it would only display a white screen, thought something went wrong with the software. Tried a reset, tried a hard reset, tried a flash started getting some screen showing and then distorting and whiteing out also on startup would get crackled sound. Tried a few more resets and so on. Removed the battery for 3 seconds-20mins-8plus hours still having a problem. Distortion gets worse when pushing the battery in the back it seems and will eventually just go to white screen. Now I had bought a new battery recently and just for kicks threw it in, seemed to eliminate my problems. Except now as I just for kicks again am charging my old battery in the cradle along with the phone and the new battery it seems to be having similar issue although it hasn't been nearly as bad as before. Now I just took the "bad" battery off the charger and it seems to be just fine in the cradle at this moment, nevermind it's flickering again. Is more poor little Hermes on it's death bed, please tell me no. I paid $200 on it being used from a company who only warranties it for 14 days, I am almost at 30 now. I bought an warranty with it being used and all however they wont help me untill I reach 60 days I guess so I may be out of luck for 30 days before I might get it fixed or my money back. Sucks too because I switched to the $40 data plan with AT&T about 5 days ago and now I guess will be paying for something I can't really use. Okay it seems as though with random pressure on the back seems to cause it. I'm leaning towards some sort of a battery contact issue perhaps? What should I do to clean/fix the contacts?
For those that wonder why I just seemed to rant about my broken phone and seemingly figured out the problem on my own and are wondering why I am still posting all of it the answer is simple: To benefit someone else who may be experienceing the same problem or who may read it and have the problem down the road they will know what they should do. That and it's late and I'm tired
the screen issue is known to be caused by the D-pad connector coming undone
Okay I had run into that as a possibility however would that affect the sound to make it crackle? Also in experimenting some more this morning with the "old" battery in place it seems to be much much more sensitive to pressure, almost to the point of holding it in the palm of your hand causes the screen to go nutty and wash out to white screen and come back etc.. However with the new battery in its much more stable and I need to apply more pressure in order for it to reproduce these symptoms. I know you've been a member for longer than me and you also work for AT&T however my gut feeling is something else may be the culprit here. I tried recording a video using my backup phone last night except I couldn't seem to get it uploaded to show what the screen is doing. Oh well I really want use of the phone but I also don't want to void the warranty, namely my extra warranty which I can't file a claim for the next month.
ok so what happened was is that i dropped my phone although when i looked at it it seemed fine, not even a scratch, calling worked...but a couple of hours later i got no signal in this place although my dad had signal and we're on the same network and we have the same phone too. I received signal as soon as I left the place.
And here is where my problem comes, everything was working fine and i had my phone in my pocket for the whole day cause i was at school and after school i decided to take a look at the time, but my phone was off and wouldn't turn on, but i expected that it ran out of battery.
I got home and tried charging it, but nothing happened, so i decided to use my dad's battery (fully charged) it still wouldn't turn on, i've tried soft/hard resets still nothing.
can it be the hardware? what is broken? it won't turn on/won't charge/no led lights/no red led when charging without battery/ nothing so what is wrong please help.
Probably battery contacts... If you can see a crack, you might be able to resolder them and fix however the Hermes uses a multi layered board and if the break is there then you need a new mainboard, in a few words, your Hermes is toast....
is there any possible fix? if the board is broken, where can i get a replacement and instruction on how to fix? thanks :]
Find an old Hermes on ebay. If the screen doesn't work or something, DON'T get one with "No GSM", then you should be able to replace the Mainboard.
Find the HTC Service Manual here - http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
You need a size 6 torque key and a small flatbladed screwdriver to get the Mainboard. Pretty easy, I've taken my Hermes apart more times than I can count.
Cheers...
thanks for the help so far :]
but is there a site that just sells the part? cause i really don't want to end up buying a mainboard on ebay that ends up not working too.
Hello,
before anyone asks, i did try searching the forum, maybe i am not typing the correct search criteria.. but i haven't been able to find anything anywhere about this issue i am having.
I have the T=mobile G1 with JFK 1.5 ADP, and a few widgets, now the phone in itself is great, the OS if working, no crashes etc.
This is my dilemma:: whenever i have the phone in my pocket and i bend down, or run or anything, the phone turns off. when i am talking on it, put it to my shoulder and put pressure on it to hold it in place, it turns off... if i have it sitting on my desk and push too hard on the screen or the thin edges around the lcd, it will turn off. in some cases it reboots and comes back, but 75% of the time its just off.. now this is a problem, because when i have it in my pocket, and it doesnt come back on, i dont know that it is off till i look at it.
anyone have any thoughts on what this could be?? bad digitizer, bad LCD, etc? i am also in the processes of contacting HTC about this, seeing what they say. but i figure it wont hurt to ask, maybe someone else has ideas
Thanks, any help would be appreciated.
Rafal
rbebenek said:
Hello,
before anyone asks, i did try searching the forum, maybe i am not typing the correct search criteria.. but i haven't been able to find anything anywhere about this issue i am having.
I have the T=mobile G1 with JFK 1.5 ADP, and a few widgets, now the phone in itself is great, the OS if working, no crashes etc.
This is my dilemma:: whenever i have the phone in my pocket and i bend down, or run or anything, the phone turns off. when i am talking on it, put it to my shoulder and put pressure on it to hold it in place, it turns off... if i have it sitting on my desk and push too hard on the screen or the thin edges around the lcd, it will turn off. in some cases it reboots and comes back, but 75% of the time its just off.. now this is a problem, because when i have it in my pocket, and it doesnt come back on, i dont know that it is off till i look at it.
anyone have any thoughts on what this could be?? bad digitizer, bad LCD, etc? i am also in the processes of contacting HTC about this, seeing what they say. but i figure it wont hurt to ask, maybe someone else has ideas
Thanks, any help would be appreciated.
Rafal
Click to expand...
Click to collapse
Sounds like a physical problem with the battery losing contacts. I suggest a replacement.
Thanks, its on its way back to HTC.. we'll see what they say about it...
ive been having the same problem... let me know what happens... do you by chance have one of the skins on (ie best skins or invisishield)?
This is the dumbest problem with the easiest solution... take the back cover off, remove the battery, clean the contacts (both battery and phone), put back together. Fixed.
update...
lbcoder said:
This is the dumbest problem with the easiest solution... take the back cover off, remove the battery, clean the contacts (both battery and phone), put back together. Fixed.
Click to expand...
Click to collapse
there is not need to be an A*****e about it. trust me, that is the first thing i did, don't assume you are smarter then everyone else.... its a defect they had in a few models. i dont see why you need to jump up and start pretending like you know everything about everything.
as an update to the status, the main board is broken but HTC is refusing to fix it, since they are telling me i have a broken warranty sticker. currently if i wanted it fixed i would have to pay $378.51. That is the amount for the repair. so for now i have filed a dispute with their Repain dept. since there is no point in fixing it when a new phone is 30 bucks more.
sorry for not updating sooner, i was in the tri state area the last week.
will keep you posted on this. but if yours is doing the same thing, call T-mobile if you have thme, for a replacement, or HTC for the repair.
Hey.
I'm wondering if someone can lend me a hand here. I was rock climbing last weekend, left my phone in my jacket pocket, and I suspect someone may have stepped on / thrown my jacket.
In any case... it's not working right now. It doesn't start up, and there's no light when I plug it into the USB/wall chargers. Any hints on whether this thing is totally trashed? The phone was in its case the whole time, and its exterior looks completely undamaged as far as I can tell, with no scratches, etc. Another possibility is that it got rained on, but I highly doubt that the water penetrated the outside of the phone (especially given that it was in the case the whole time).
If anyone can help me getting my phone working again I would be eternally grateful.
you're kidding me,right? your phone doesn't start,no led comes on when you plug it in,and you want someone to tell you if it's trashed? did you check that the battery is properly seated?
hey whats going on? Heres what I suggest, take it to the tmobile store and tell them that the phone was charging and it started acting funky so you turned it off, and than it never came back on. From there they will switch out your battery, than if that dosent work they will just give you a new phone right there in the store. Long as no water damage which i dought it does. Just do that and you will be ok, I have done that many of times lol.
>did you check that the battery is properly seated?
Yes. I also wiped the contacts on the battery and the device.
mikesx4911 said:
hey whats going on? Heres what I suggest, take it to the tmobile store and tell them that the phone was charging and it started acting funky so you turned it off, and than it never came back on. From there they will switch out your battery, than if that dosent work they will just give you a new phone right there in the store. Long as no water damage which i dought it does. Just do that and you will be ok, I have done that many of times lol.
Click to expand...
Click to collapse
Unfortunately it isn't quite that simple for me. I live in Canada; I purchased this phone several months ago basically new off eBay (it was used for a couple of weeks). Funnily enough, my iPod which was "naked" in the same pocket as my phone is also undamaged and continues to function normally. Are there any tests I can do to better determine the location of the problem?
sorrofix said:
Unfortunately it isn't quite that simple for me. I live in Canada; I purchased this phone several months ago basically new off eBay (it was used for a couple of weeks). Funnily enough, my iPod which was "naked" in the same pocket as my phone is also undamaged and continues to function normally. Are there any tests I can do to better determine the location of the problem?
Click to expand...
Click to collapse
You're gonna need some technical know how. Open the phone and check the mobo for any disconnected cable and/or water damage. There is really nothing you can do that you haven't already done from the outside of the phone. If possible, find a local repair shop and have them take a look at it.
Update: so basically I took out the battery, waited a day or so, put it back in, and all the buttons lit up on the phone (but the LCD remained blank and so did the charging light).
Took the battery back out, waited another day, put it back in, and the phone suddenly turned on and has been working fine since. Anyway, thank you everyone for your help.