I found out only a few days after I installed the 1.64.08.21 radio rom that my camera was not working anymore :
black screen, hyper slow, "Unable to capture photo. Unable to get frame data from camera device.", cannot switch from rear to front camera, forced to kill the process to exit.
I saw a few threads related to Kayser saying that camera problems were linked to radio rom.
I tried many combinations to revert :
1.64.08.21
1.58.25.14
1.58.21.23
1.70 OliNex
nothing changed : camera still not working (although it worked well with Olinex and 1.58 before I switched to 1.64)
I even tried different main rom sets and SPLs to come back to the original config : HardSPL 2.20, SPL Original, WM6.1 bepe 67, WM6.1 Aserg, SFR 1.25.406.1, SFR original... camera still not working.
The only positive thing is the Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab released on Kayser that makes the camera application usable again (not slow anymore, but screen is completely scrambled, multicolor and showing front camera image when using the rear camera, and switching between rear and front cameras shows that the front camera only works, keeps saying "unable to capture photo" when using the main rear camera (and sometimes with a strange sound like some diaphragm trying to autofocus).
The phone did not receive any shock, so I am a bit skeptical about a hardware issue suddenly rising, but I am concerned by the fact that reverting to any rom does not make the camera working anymore after 1.64.08.21.
My latest working config was
WM6.1 Bepe 0.67 Standard
1.70 OliNex
Please share and if someone found a way to make the camera work again (if this issue is software only and can be fixed...) that would be great !
boldbull said:
I found out only a few days after I installed the 1.64.08.21 radio rom that my camera was not working anymore :
black screen, hyper slow, "Unable to capture photo. Unable to get frame data from camera device.", cannot switch from rear to front camera, forced to kill the process to exit.
I saw a few threads related to Kayser saying that camera problems were linked to radio rom.
I tried many combinations to revert :
1.64.08.21
1.58.25.14
1.58.21.23
1.70 OliNex
nothing changed : camera still not working (although it worked well with Olinex and 1.58 before I switched to 1.64)
I even tried different main rom sets and SPLs to come back to the original config : HardSPL 2.20, SPL Original, WM6.1 bepe 67, WM6.1 Aserg, SFR 1.25.406.1, SFR original... camera still not working.
The only positive thing is the Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab released on Kayser that makes the camera application usable again (not slow anymore, but screen is completely scrambled, multicolor and showing front camera image when using the rear camera, and switching between rear and front cameras shows that the front camera only works, keeps saying "unable to capture photo" when using the main rear camera (and sometimes with a strange sound like some diaphragm trying to autofocus).
The phone did not receive any shock, so I am a bit skeptical about a hardware issue suddenly rising, but I am concerned by the fact that reverting to any rom does not make the camera working anymore after 1.64.08.21.
My latest working config was
WM6.1 Bepe 0.67 Standard
1.70 OliNex
Please share and if someone found a way to make the camera work again (if this issue is software only and can be fixed...) that would be great !
Click to expand...
Click to collapse
Flash Original ROM and you're back in business.
reyjabs said:
Flash Original ROM and you're back in business.
Click to expand...
Click to collapse
Not true
I flashed all roms including the original one (raramomo_ROM_SFR_Original) and still not working.
(one strange thing, I thought the splash boot screen was part of the original rom, but it stays even after flashing the original rom)
would it be possible that software broke the hardware ?
Personally I think your hardware had issues before you flashed this Radio. I am running the same radio and have been for awhile now without issues.
Camera and Viddeo works fine....
I had the same problem - I flashed my Polaris and after it "Unable to initialize camera" I tried use other ROM without good result. I had to flashed to original WWE ROM and sent to servis - of course by warranty ;o) Next week I will have my Polaris after service
bkeaver said:
Personally I think your hardware had issues before you flashed this Radio. I am running the same radio and have been for awhile now without issues.
Camera and Viddeo works fine....
Click to expand...
Click to collapse
mmh... camera has worked flawlessly since the beginning and after many flashes, until I flashed that specific radio rom (once again no physical shock so no reason that it does not work suddenly)
It also seems that I am not the only one having that issue:
http://forum.xda-developers.com/showthread.php?t=351044
http://forum.xda-developers.com/showthread.php?t=349375
but downgrading radio rom did not fix anything like said in threads...
k9nelly said:
I had the same problem - I flashed my Polaris and after it "Unable to initialize camera" I tried use other ROM without good result. I had to flashed to original WWE ROM and sent to servis - of course by warranty ;o) Next week I will have my Polaris after service
Click to expand...
Click to collapse
that is my concern : how possible a soft can break the hardware ? (and apparently not for everybody)
I hope a soft solution exists (I want to avoid sending the phone to service and waiting for a new one, but that seems to be the only issue)
unable to initialize camera - solution
Solution is unbelievably simple. Take out the microSD card. Take out the battery and leave it outside the phone for at least 15 minutes (found this hint in other forum). Then put the battery back into the phone and start the phone without microSD card. Et voila camera is working. Don't ask me how it is possible.
//some comments says that it didn't help them either (don't know if they took out even the microSD card)
UPDATED: After few days the same problem "unable to initialize..." nothing helps (battery, hard reset, anything)
HTC Polaris (Touch Cruise)
ROM Bepe Premium 0.67 WM6.1
Radio Rom: 1.64.08.21
Very odd issue! I can confirm my polaris is working fine (camera ok).
Hobbit_CZ said:
Solution is unbelievably simple. Take out the microSD card. Take out the battery and leave it outside the phone for at least 15 minutes (found this hint in other forum). Then put the battery back into the phone and start the phone without microSD card. Et voila camera is working. Don't ask me how it is possible.
//some comments says that it didn't help them either (don't know if they took out even the microSD card)
HTC Polaris (Touch Cruise)
ROM Bepe Premium 0.67 WM6.1
Radio Rom: 1.64.08.21
Click to expand...
Click to collapse
no luck : did not work for me, even with SD out, even with a hard reset after 15 minutes off with battery and SD out... camera still sluggish and black.
still need to intall the Nadavi fix for Kaiser to make the camera tool reactive and be able to switch to front camera but the rear one is still not available...
Try to find the file "Camera.exe" in windows directory, and run it from there.
If the camera is working, than just create a new link to camera in programs folder.
shayd said:
Try to find the file "Camera.exe" in windows directory, and run it from there.
If the camera is working, than just create a new link to camera in programs folder.
Click to expand...
Click to collapse
yes, the camera application is working, but not possible to capture photo/get frame data from camera device.
Camera working again !
shayd said:
Try to find the file "Camera.exe" in windows directory, and run it from there.
If the camera is working, than just create a new link to camera in programs folder.
Click to expand...
Click to collapse
you know what ? thanks to your idea, I completely deleted all camera.xxx files in /windows, and decided to install the Nadavi_OLD_HTC_Camera_5_0_4_2915_00.cab camera tool (found in the Kaiser section) :
I received a message telling me that it could not properly remove the old camera version, proposed to install whatever, which I did, and then restart.
And tada !! After weeks of flashing differents Roms or radios (which proved to be useless) it is working back again !
This is a completely crazy software bug not at all related to the hardware !
Thanks to all and especially you Shayd for sharing your ideas, that finally helped me !
boldbull said:
you know what ? thanks to your idea, I completely deleted all camera.xxx files in /windows, and decided to install the Nadavi_OLD_HTC_Camera_5_0_4_2915_00.cab camera tool (found in the Kaiser section) :
I received a message telling me that it could not properly remove the old camera version, proposed to install whatever, which I did, and then restart.
And tada !! After weeks of flashing differents Roms or radios (which proved to be useless) it is working back again !
This is a completely crazy software bug not at all related to the hardware !
Thanks to all and especially you Shayd for sharing your ideas, that finally helped me !
Click to expand...
Click to collapse
Glad to see it helped you
Hello All
I have the same issue of camera init.
I have installed the Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab and now I cannot launch the camera.exe.
Any idea to solve it without hard reseting my Polaris?
Thanks in advance!
Gadgio said:
Hello All
I have the same issue of camera init.
I have installed the Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab and now I cannot launch the camera.exe.
Any idea to solve it without hard reseting my Polaris?
Thanks in advance!
Click to expand...
Click to collapse
try that : http://forum.xda-developers.com/showthread.php?t=391455
boldbull said:
try that : http://forum.xda-developers.com/showthread.php?t=391455
Click to expand...
Click to collapse
Thanks a lot for the tips!
(For info my Cruise was in Repair center last week : I could't hear my caller (maybe a solder issue) so they change the motherboard, reflash the phone and now the camera is working again).
boldbull said:
that is my concern : how possible a soft can break the hardware ? (and apparently not for everybody)
I hope a soft solution exists (I want to avoid sending the phone to service and waiting for a new one, but that seems to be the only issue)
Click to expand...
Click to collapse
I had exactly the same problem with HTC Tytn. Unfortunately I never solved the problem (camera never worked well again: at times yes at times no).
Now I am with a new Polaris and I am scared of flashing anything into it.
Related
Very strange thing happened to my QTEK 2020:
I had installed the Widcomm Bluetooth Stack the 'Bluetooth.cab' floating around and I was not pleased with it nor did I truly need it and tried uninstalling and NO GOOD. Hard Reset and I in turn started from scratch with reinstalls. Here is my problem:
Upon the Hard reset there is no longer a camera.exe nor album.exe in the \windows directory - and the button of course is not assigned to the Camera because it IS NOT THERE!
This is a HARD reset peeps! It is inherent in the ROM 1.60.00WWE, no? How is this possible? Did this villainous bluetooth.cab do this? I have tried again hard resetting to see if there was anything and EVERY time there is no Camera nor Album installed!
I have installed the Camera/Album 2.5 which came from HTC inherent in the 1.72 ROM and it works great until I soft reset and then it locks the device so there is not a solution there.
Very strange indeed, any comments or remedies?
- Thanks
i've had the same problem with at times a hardreset would not load my extented rom programs another hardreset or opening the extented rom manualy and running the cab files solves it
Looks like part of the extROM was not installed.
Check the config.txt if its still complete. If not: repair it.
Check is the cabs are still in the extrom. If not: didnt you forgot to lock the extrom when you hard-reset the device? You have to get new cabs then.
I think the old versions are lying around somewhere.
OR: Upgrade to 1.72.00! Good occasion now.
Thanks
Thanks for the help... I didnt even know all of the possibilities of unlocking the ROM and seeing what is in there!!! This little machine is COOL!!
I suppose backing up the External ROM is 100% important now that I know it is there!!!
Thanks again for all of the help.
I installed the ExtROM unlocker and re-installed the camera 1.5 cab that was there, rebooted and tried out the camera and it is giving me the same problems as the 2.5 version of the camera did... I will leave it alone for the time being, I didnt really use the camera that much any way
- Cheers
tried out the camera and it is giving me the same problems as the 2.5 version of the camera did
Click to expand...
Click to collapse
what problem ?
I dont know what happened, but I replaced the older version of the Camera CAB with the 2.5 and changed the config file and then locked the ExtRom then hard reset and the camera works fine as it should...
Before ithe device was locking up - just a black screen when the camera was called... not any more.
Again, thanks for all of the help! This forum is amazing!
- Cheers
Well... I've posted earlier about my S100 and the "Button Lock" feature which doesn't work properly...
Things are getting worse. Now I can't save pictures onto my SD-card anymore (and yes, I have tried with another SD-card). When I capture a foto, the camera app crashehs and I'm back at the Today screen - with all colours inverted in a strange way. Only way to solve this is either a softreset or switching back so that the camera saves to the internal memory instead of the SD card...
So.. Now I'm wondering if I can flash it again since Hardresets won't solve my problems. I've updated my S100 from ROM 1.03.148 WWE to the newer ROM 1.06.116 WWE released by Brighpoint sweden. Can I simply run this update again - or does it require that i have the older ROM present to work?
I've emailed brighpoint's techsupport, but no response so far... Don't want to ruin it...
I got my htc cruise about ten days ago. Camera was working fine.
But four days ago, i got the message the camera could not be initialized. I read on this forum that it sometimes helped to remove the battery for about 15 minutes. So that's what i did. And guess what, it worked for about 1 day
Then i kept getting the message the camera couldn't be initialized. Removing the battery didn't help anymore.
Then i hoped a hard-reset would do the thrick. Windows reinstalled and everything went fine. But now the camera icon is missing from "Programs". I tried to start it by going to the photo album and pressing the camera icon. Nothing happened. Then i use file explorer to go to the exe file. I found the camera.exe file, i tapped it but nothing happens.
Anybody have a solution?
Return it asap and get a new one
Camera issue
Hello,
I got this problem 5 days ago too... Very strange! Tried most of the procedures said here in the forum and none worked. The weirdest thing is that the camera just stopped working from one day to another, i clearly remember of not installing anything during those days.
I am very pissed about this issue! My problem is bigger: I bought it at UK while travelling and currently I live in Brazil (no support center around here).
Do you guys really think that its a hardware problem? How can that be if some other people already said here in the forum that a few days or weeks later, the camera went back on?
Anyone else can help us with this issue?
Regards
Try that one, worked everytime the issue happened for me:
http://forum.xda-developers.com/showthread.php?t=391455
Thats quite strange! My Storage Card is 40% free...
My problem is bigger now... After 2 weeks of "could not initialize" issue, my camera simply doesnt start anymore... I tried to lauch the application directly from the camera.exe but it doesn´t work either...
Don´t know what else to do...
radio rom upgrade?
did you upgrade your radio rom to 1.64.08.21 ?
if your answer is "yes" you should downgrade to Murata radio rom (1.58.21.23) ..
don't forget to backup your data, because Murata Radio does hardreset after downgrade..
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
grgomes said:
No. I use the original Radio ROM (1.58.21.23).
I dont wanna try to change the ROM yet in case I need to send it to service.
I tried to install the Nadavi New HTC Camera and didn´t help in any way. But I noticed that, after uninstalling this patch, the camera exe files went back to the old versions. I tried to uninstall them (the original ones) or delete them in the File Explorer, even in safe mode, and windows mobile wouldnt let me.
Kenhas, looks like Im in the same point as you (exe is not working either). Did you happen to make yours work?
Any other soul could help us in here? (btw thanks for the help given by everybody!)
Click to expand...
Click to collapse
have you tried to delete the /DCIM directory from your storage card and soft reset ?
if your exe is broken you probably need to hard reset.
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
grgomes said:
I formatted my storage card (8 gb) and soft reset... no deal
My exe is broken now. Do you really think the hard reset now is going to fix it? Before I had the "unable to initialize device", now I don´t have anything
I installed both Microsoft Portrait and Coolcamera to try the camera, they get quite the same error.. something like "failed to get camera"...
Click to expand...
Click to collapse
I don't know if those tools share the same camera dlls, but if that is the case, a hard reset might fix things, otherwise, it means it is a hardware failure, and you will need to send your phone back to service.
FYI, when I faced camera issues, I installed the NADAVI WITH FIX cab for Kaiser , and that version only made the camera tool work again (although for me the rear camera was not working due to the storage card issue)
Maybe try installing that one first before hard resetting
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards
I have 2 problems with my Touch HD:
1. the first one is related to the camera.
I tried to make a rom update which failed the first time, but when i tried the second time it all went well. The problem is that after the rom update, all the pictures and video that i've made had a lot of noise. i've attached a picture taken yesterday.
2. the second problem is with the internet connection.
all the settings are ok, doubled checked with the isp site. i'm usig vodafone and i get this messege when i try to launch the data connection: "cannot connect for an unknonw reason. To check your connections settings and change them if needed, tap Settings ...."
i've tried different versions of rom, original or 3rd party provided, including froyo and wm 6.5 with no result for neither one of the problems.
unfortunately I do not know which was the original rom. the phone was bough in january 2009.
what is the rom?
try to change camera is very easy only install a cab!
found the link in another post previous this!
Hi
Don't know if this will help, but have you tried HD Tweak? I found this sorted out my Camera software. I am on the stock WM6.1 mind.
The ROM version is 1.57.831.1 (47324) WWE
The Radio version is 1.14.25.24
i've installed two different version of drivers for the camera, but it's still not working. same problem ...