New PRL 60612 for Sprint go get it!!! - Mogul, XV6800 General

called today to update my prl after Re-flashing and I got PRL 60612.. so far no problems, everything works great.
Go get yours!!

60711 is available at http://www.corolada.com/prl

swinn said:
60711 is available at http://www.corolada.com/prl
Click to expand...
Click to collapse
yeah, but not 60612
60711 gave some people problems. dont let the number fool ya.

What does this do anyways? Sorry a newbie

just a little QPQ 60711 is MAINLY meant for Data cards.... dont ask me why or if im 100% sure but every data card where i work and at home (parents have them too )
they have 60711 while the phones have 60612!

Great imagination
Kane3162 said:
just a little QPQ 60711 is MAINLY meant for Data cards.... dont ask me why or if im 100% sure but every data card where i work and at home (parents have them too )
they have 60711 while the phones have 60612!
Click to expand...
Click to collapse
The PRL stands for Preferred Roaming List. if they start with 606 that indicates 1xEVDO the EVDO phones and cards both can use the same PRLs because it's just a generic list of SIDs, and bands in order of carrier Preference The Aircards tend to be behind because when PRL Updates are added it's added to the new versions of software, and more often PRL changes are for voice roaming. So all in all 60711 is a different class of PRL and you'd be better off updating your PRL with your Carrier, and usually will only help you whilst outside of their normal coverae area...seeing as most us cdma carriers use a nationwide sid for themselves at this point in time.

codyppc said:
yeah, but not 60612
60711 gave some people problems. dont let the number fool ya.
Click to expand...
Click to collapse
Same here. With 60711 my phone would constantly get stuck in 1xRTT. With 60611 (and now 12) it hasn't happened at all.

Related

prl

i have a quick question if u change your prl to a diffrenet one what will it do..meanining i have sprint and then i changed it to a alltel
Dc_striker said:
i have a quick question if u change your prl to a diffrenet one what will it do..meanining i have sprint and then i changed it to a alltel
Click to expand...
Click to collapse
Try it .. see what happens! You can always change it back.
I have absolutely no idea ... sounds like a fun experiement.
i just did and i get more bars but i roam and no evdo
i really dont care about the roaming cause i dont get charged for it but no evdo im going to mess around with other prls
Dc_striker said:
i just did and i get more bars but i roam and no evdo
i really dont care about the roaming cause i dont get charged for it but no evdo im going to mess around with other prls
Click to expand...
Click to collapse
Fun times! Keep us posted how it goes. Have fun!
Dc_striker said:
i just did and i get more bars but i roam and no evdo
i really dont care about the roaming cause i dont get charged for it but no evdo im going to mess around with other prls
Click to expand...
Click to collapse
The PRL controls which towers and providers your phone uses as primary service. You do not get charged for roaming; however, the Sprint agreement says that your service can be terminated if you roam more than half the time in any month, so leaving an Alltel (or any other non-Sprint) PRL on a Sprint phone will probably not end in a good result. Unless, of course, you are looking for a way out of your contract...
usally u get charged for roaming and i havent heard of getting kicked off a just for roaming that kinda stupid but i didnt change around and it messed up my EVDO now i cant connect to it and help?
or any adivce
Dc_striker said:
or any adivce
Click to expand...
Click to collapse
Call Sprint at *2, tell them you need a PRL update, and they will set it up for one to download to your phone.
And if you "havent heard of getting kicked off a just for roaming" then read the Sprint contract.
Roaming-Included Plans: ... Sprint may terminate service if (1) more than 800 minutes, (2) a majority of minutes or (3) a majority of data kilobytes in a given month are used while roaming...
Click to expand...
Click to collapse
i did the prl update and they are like idk what wrong or maybe its the phones hardware i was like WTF
Dc_striker said:
i did the prl update and they are like idk what wrong or maybe its the phones hardware i was like WTF
Click to expand...
Click to collapse
OK, does that mean it is working now?
bakntyme said:
OK, does that mean it is working now?
Click to expand...
Click to collapse
no i have to go tommrow after school

Unlocking question- so sick of ATT

I really want to get one of these G2 phones. Att's phones are horrible and their service is going down hill as well.
THe only problem is their coverage in my area is far superior to TMO.
When the G2 is able to be unlocked how would popping a prepaid sim card in the G2 work?
Would the G2 all of a sudden be able to use all of the ATT network with only limitation being edge only? Or would I have to configure the phone to use ATTs data and or voice?
I'd like to just tape the pre-paid sim to the inside battery case and pop it in when needed, but if it's time consuming to make the swap I might reconsider.
I don't think the G2 supports AT&T's 3G bands, so while it will work you won't have any fast data. Why not just get an iPhone4? Granted it has iOS, but the hardware is better than anything Android. Having said that I still bought a G2 because I hate AT&T.
krayshunist said:
I don't think the G2 supports AT&T's 3G bands, so while it will work you won't have any fast data. Why not just get an iPhone4? Granted it has iOS, but the hardware is better than anything Android. Having said that I still bought a G2 because I hate AT&T.
Click to expand...
Click to collapse
Thanks. I'm aware that I won't have 3G- that's not a problem since I'll only use the ATT sim card when I leave the city- not much.
That's why I ask if it's as simple as popping in the ATT sim card and being able to get SMS/MMS/Data etc without having to change a bunch of settings?
I'd just forward my TMO number to the ATT sim.
pdxrealtor said:
I'd just forward my TMO number to the ATT sim.
Click to expand...
Click to collapse
By this, I take it you mean to pay for 2 accounts? The only way you will have a TMo number is if you have service with them.
As for the settings, you could probably do it with an ATT sim if the radio bands overlap. As others have mentioned, you'll be limited to edge speeds at best, so it's probably a real bad idea.
Honestly, AT&T's network is pretty bad these days. I wouldn't go as far as saying it's better than Tmo.
HamNCheese said:
By this, I take it you mean to pay for 2 accounts? The only way you will have a TMo number is if you have service with them.
As for the settings, you could probably do it with an ATT sim if the radio bands overlap. As others have mentioned, you'll be limited to edge speeds at best, so it's probably a real bad idea.
Honestly, AT&T's network is pretty bad these days. I wouldn't go as far as saying it's better than Tmo.
Click to expand...
Click to collapse
When I leave town i hit edge speeds on ATT anyways so what's the diff??
I would have a primary TMO line and a pre-paid ATT sim with access to data for when I hit the few spots that TMO doesn't cover.
I simply want to know if you have to mess with data settings to get data while switching between phones.
Once you swap SIM cards the phone should pick up the network automatically, but is it really worth it to swap sim cards (which includes shutting the phone down, removing battery, replacing card, putting battery back in, starting up phone, as I'm sure you know) just to get service out in the middle of nowhere? I mean I understand the need to be always connected, but is it really worth it?
No you don't have to do any switching. Just initial setup. You have to acquire an unlock code from t-mobile so your ATT sim works on it. Once you do that you can do voice calls. You need to add the APN for ATT in the network settings.
The APN which stands for Access Point Name is basically a collection of settings and variables to allow the phone to connect to the data network.
Since the G2 will already have the T-Mobile settings you just need to get the settings for ATT from ATT, unless you google it.
Hope i helped.
elmejor183 said:
No you don't have to do any switching.
Click to expand...
Click to collapse
Just so nobody gets confused. Of course you have to switch the sim card, but apart from that nothing else.
LOOK AT THE SIGNATURE LINE! YA BABY!
I plan on using the att card when I know ill be in a remote area without TMO voice or data for extended periods. Long drive, the beach, the mountain, camping etc. I wouldnt switch in a situation that only warranted the need to do a quick switch.
Sent from my T-Mobile G2 using XDA App
elmejor183 said:
No you don't have to do any switching. Just initial setup. You have to acquire an unlock code from t-mobile so your ATT sim works on it. Once you do that you can do voice calls. You need to add the APN for ATT in the network settings.
The APN which stands for Access Point Name is basically a collection of settings and variables to allow the phone to connect to the data network.
Since the G2 will already have the T-Mobile settings you just need to get the settings for ATT from ATT, unless you google it.
Hope i helped.
Click to expand...
Click to collapse
Must have missed your post. Yes you answered my question. Thanks!
Sent from my T-Mobile G2 using XDA App
Another question on this issue-
When I know I'll be out of TMO range for day or whatever and I forward my TMO number to my prepaid ATT sim card will txt/mms sent to the TMO number forward over to the ATT number??
If anyone needs a G2 unlocked. Hit me up I can get it done for you.
Thanks
Unlock me!
rhcp0112345 said:
If anyone needs a G2 unlocked. Hit me up I can get it done for you.
Thanks
Click to expand...
Click to collapse
Already got mine unlock, but the cell won't pick up or register to any network something really wrong with this phone. Now I can't use my phone even with T-Mo sim. A lot of user oversea suffer from this issue, Bewarn.
bluemoko said:
Already got mine unlock, but the cell won't pick up or register to any network something really wrong with this phone. Now I can't use my phone even with T-Mo sim. A lot of user oversea suffer from this issue, Bewarn.
Click to expand...
Click to collapse
Sounds like BS. How did you even unlock it? You may have had someone hack it up or bought it unlocked.
rhcp0112345 said:
If anyone needs a G2 unlocked. Hit me up I can get it done for you.
Thanks
Click to expand...
Click to collapse
FYI- just like I pm'd you-
I just called T-MOBLIE and they are sending an unlock code within 24 hours.
Why would anyone pay 40.00? I guess you could call it the penalty fee for not using a search button. LOL

Please HELP! Data almost non-existent!!

Hey guys, I need some help.
I've been using my HD2 for two months now with little to no issue.
I've installed a couple of different Android ROMs with success, and enjoyed using them.
Recently I tried one that I didn't like, and decided to restore my phone to factory WinMO ROM.
Since then, I've had HORRIBLE data speeds...
I'm talking 50-60Kb/s where I used to get at LEAST 500Kb/s...
What on earth happened??
I'm currently on stock WinMO ROM with nothing flashed except for HSPL.
Can anyone help?
nova hands said:
Hey guys, I need some help.
I've been using my HD2 for two months now with little to no issue.
I've installed a couple of different Android ROMs with success, and enjoyed using them.
Recently I tried one that I didn't like, and decided to restore my phone to factory WinMO ROM.
Since then, I've had HORRIBLE data speeds...
I'm talking 50-60Kb/s where I used to get at LEAST 500Kb/s...
What on earth happened??
I'm currently on stock WinMO ROM with nothing flashed except for HSPL.
Can anyone help?
Click to expand...
Click to collapse
It may be the Radio...
deadmansink said:
It may be the Radio...
Click to expand...
Click to collapse
Well, I'm using stock Radio right now... 2.08.50.08_2
When I was on Android, I was using 2.15.50.14. That was the same one I had been using all along.
Makes no sense.
I actually did a Task29 and formatted the memory card, too. That should have erased everything.
Oddly enough, when I restored the phone to its original WinMO ROM, it had somehow remembered my Web2Go favorites.
nova hands said:
Well, I'm using stock Radio right now... 2.08.50.08_2
When I was on Android, I was using 2.15.50.14. That was the same one I had been using all along.
Makes no sense.
I actually did a Task29 and formatted the memory card, too. That should have erased everything.
Oddly enough, when I restored the phone to its original WinMO ROM, it had somehow remembered my Web2Go favorites.
Click to expand...
Click to collapse
You know, every time you change a build/ROM it may change the DNS settings. Have you double checked those? Most builds use a default Google DNS, but check your carrier, most likely T-Mobile. My thumbnail has those settings that can be found in the system/build.prop file; edit/add to look like mine.
I think I mentioned this to you already on a different thread, did I?
deadmansink said:
I think I mentioned this to you already on a different thread, did I?
Click to expand...
Click to collapse
Yeah, but now I'm dealing with slow speeds in Windows Mobile. I'm not even in Android yet. I don't think I'm going to get fast data speeds in Android with your settings if I can't even get them in stock Windows Mobile. Or am I completely wrong?
nova hands said:
Yeah, but now I'm dealing with slow speeds in Windows Mobile. I'm not even in Android yet. I don't think I'm going to get fast data speeds in Android with your settings if I can't even get them in stock Windows Mobile. Or am I completely wrong?
Click to expand...
Click to collapse
What's your signal strength? Did you already mention that you're getting "H"?
I know you flashed the WMRom, but what Radio is it? Have you tried changing Radios after flashing stock Rom? I'm seeing a lot of different opinions on Roms from 2.10-2.15, but 2.10 seems to be the front-runner. I'll keep checking...
If you go to the settings tab > wireless controls > phone > band ; are network type and band frequency set on auto?
You can also change APN settings, check for alternate APN's. That's all I've found through Google and XDA...
deadmansink said:
What's your signal strength? Did you already mention that you're getting "H"?
Click to expand...
Click to collapse
Yeah, full signal and the "H".
deadmansink said:
I know you flashed the WMRom, but what Radio is it? Have you tried changing Radios after flashing stock Rom? I'm seeing a lot of different opinions on Roms from 2.10-2.15, but 2.10 seems to be the front-runner. I'll keep checking...
Click to expand...
Click to collapse
I'm on 2.15.50.14. It's the one I was using before when I was getting decent speeds at 500kb/s. I reflashed it again after installing VBNRom and Android.
deadmansink said:
If you go to the settings tab > wireless controls > phone > band ; are network type and band frequency set on auto?
Click to expand...
Click to collapse
Is this in WinMO or Android? If you mean Android, then yes, I set it to GSM/WCDMA Auto.
deadmansink said:
You can also change APN settings, check for alternate APN's. That's all I've found through Google and XDA...
Click to expand...
Click to collapse
I set my APN to match yours, and edited my build.prop to include your #DNS settings.
This is what I get for complaining that 500kb/s is not fast enough.
Maybe my pain can help you. I have been having the same terrible data speeds on both my HD2 and Mytouch Slide phones for almost a year. T-Mobile kept telling me to get new sim cards. That never helped for very long. Replaced all the phones and no change. My data slowed down to 50-60k just like yours. Dropped calls all over the place. Data stalling. T-Mobile gave up and said it was structural interference. I called BS. They even offered to cancel my contracts with no charge to me. I called in 2 days ago and spoke with someone in Tier 2 support who had a clue finally. She said I had old sims. I called BS. But she informed me that T-Mobile has new UICC SIMS that are designed for the 3.5G network they now run. Long story short I went to my local T-Mobile store and asked for 2 new UICC SIMS and that fixed the issue. I am now getting almost 4mbits down and 1.7mbits up on both lines with only 2 bars of signal in my house. No data stalls, no dropped calls, and the quality is better. Here is some info on wikipedia about the new UICC cards. They are basically a system on a chip and assist with the 3G communications stuff. http://en.wikipedia.org/wiki/UICC
Here is a whole thread about it in the T-Mobile forum with pictures of old vs new sim towards the bottom. http://forums.t-mobile.com/t5/myTouch-4G/Updating-Sim-Card-Does-it-really-matter/m-p/546631
nova hands said:
Yeah, full signal and the "H".
I'm on 2.15.50.14. It's the one I was using before when I was getting decent speeds at 500kb/s. I reflashed it again after installing VBNRom and Android.
Is this in WinMO or Android? If you mean Android, then yes, I set it to GSM/WCDMA Auto.
I set my APN to match yours, and edited my build.prop to include your #DNS settings.
This is what I get for complaining that 500kb/s is not fast enough.
Click to expand...
Click to collapse
No worries, I was actually referring to WM on all accounts, since that's what you said that you were having a problem with. Searching through Google and XDA lead me to those questions and recommendations. The last post seems reasonable, I would check on that. Also, T-Mobile changed there DATA specs, and I saw that they lowered the bar to 5gs and a speed cap after, maybe you were pulling some speed doing something and they capped it? Don't know, but check on the SIM card deal, see what you got.
kevev said:
Maybe my pain can help you. I have been having the same terrible data speeds on both my HD2 and Mytouch Slide phones for almost a year. T-Mobile kept telling me to get new sim cards. That never helped for very long. Replaced all the phones and no change. My data slowed down to 50-60k just like yours. Dropped calls all over the place. Data stalling. T-Mobile gave up and said it was structural interference. I called BS. They even offered to cancel my contracts with no charge to me. I called in 2 days ago and spoke with someone in Tier 2 support who had a clue finally. She said I had old sims. I called BS. But she informed me that T-Mobile has new UICC SIMS that are designed for the 3.5G network they now run. Long story short I went to my local T-Mobile store and asked for 2 new UICC SIMS and that fixed the issue. I am now getting almost 4mbits down and 1.7mbits up on both lines with only 2 bars of signal in my house. No data stalls, no dropped calls, and the quality is better. Here is some info on wikipedia about the new UICC cards. They are basically a system on a chip and assist with the 3G communications stuff. http://en.wikipedia.org/wiki/UICC
Here is a whole thread about it in the T-Mobile forum with pictures of old vs new sim towards the bottom. http://forums.t-mobile.com/t5/myTouch-4G/Updating-Sim-Card-Does-it-really-matter/m-p/546631
Click to expand...
Click to collapse
I checked... I have a new one. It has the "TM9073" on it.
Thanks, tho. THat was a good thought....
I actually got a text message this morning from T-Mobile:
"Free T-Mobile Message: Due to the amount of data you have used this billing cycle, your data speed will be slowed the remainder of the cycle."
So, that probably explains my 50-60kb/s speeds right now.
It still doesn't explain my typical 500kb/s, though...
nova hands said:
I checked... I have a new one. It has the "TM9073" on it.
Thanks, tho. THat was a good thought....
I actually got a text message this morning from T-Mobile:
"Free T-Mobile Message: Due to the amount of data you have used this billing cycle, your data speed will be slowed the remainder of the cycle."
So, that probably explains my 50-60kb/s speeds right now.
It still doesn't explain my typical 500kb/s, though...
Click to expand...
Click to collapse
It's probably because you hadn't reached the cap, yet. This is to prevent people to use phone as a modem and have internet basically for free, and not use their mobile broadban service. After the "billing cycle" it should go back up.

Details on Sprint PRL's 60678 and 1115

Here is the lehman terms about the PRL's. People who are on individual accounts will be receiving PRL 60678. It will not have 3G Data Roaming enabled.
Business and corperate accounts will be receiving custom PRL 1115, which does enable 3G Data Roaming in the six states listed below.
For all the details please read the attached files. You didn't get these from me
My FAQ for You:
1. No Samsung device has received a new PRL since 60676. We haven't received any notice of why or when Samsung devices will receve the new PRLs.
2. 60677 had numerous problems. All throughout Florida people were reportedly not getting any data at all while roaming, let alone 3G Data while roaming. So 60678 was pushed out to fix the issue, but it disabled 3G Data roaming for the time being. It may be enabled later on down the road.
3. Manually changing you PRL will not break your phone...but expect your PRL to switch back as your phone does a daily check for updates to the PRL. That is why alot of the community was switched back to 60676 after manually updating to 60677.
4. If you get any type of corperate discount on your account, you will receive the 1115 PRL.
-------------------------
National & Custom PRLs Available for FL, MI, OH, WVA, & WI
Sprint has released Custom PRL 1115 and National PRL ending xxx78 that will impact subscribers who roam in these states.
Custom EVDO PRL 1115 – Provides Business IL and CL subscribers with continued 3G/Mobile Broadband roaming services.
Consumer accounts in these states will experience a loss of 3G/Mobile Broadband roaming services. Refer to PRL Newsflash (xxx78).
Delivery of this Custom PRL is dependent on eligible Open Mobile Alliance (OMA) Phones/PDAs and Mobile Broadband devices.
Devices not eligible to receive the Custom PRL will receive the National PRL and won’t have 3G/Mobile Broadband roaming in these areas.
National PRLs (10078/50578, 20278/60678 and 60778) - Removes 3G/Mobile Broadband roaming coverage for all consumer accounts with push capable phones/PDAs and Mobile Broadband devices.
This coverage was previously enabled with PRL xxx77 and is now being removed since it didn’t provide the expected on-network capacity relief.
In an effort to strike the right balance between customer experience and roaming cost of service, the 3G roaming coverage will no longer be available for consumers but available to Business customers via Custom PRL 1115.
Consumers receiving these National PRLs will still have 1xRTT data roaming service available in the impacted states.
Sprint will begin proactively pushing the PRL to subscribers with in these locations first, then to the entire base. Subscribers with Mobile Broadband devices have to accept the PRL update prompt via SMARTview to receive this release.
Hmm so no roaming and 3g for me
Weird cause the 60677 had it and they pulled it, hopefully we will get it back, btw what if u got a hold of the 1115 prl and tried putting it on the personal phone? Will it break it? lol
davidrules7778 said:
Hmm so no roaming and 3g for me
Weird cause the 60677 had it and they pulled it, hopefully we will get it back, btw what if u got a hold of the 1115 prl and tried putting it on the personal phone? Will it break it? lol
Click to expand...
Click to collapse
Let me answer a few things first:
1. No Samsung device has received a new PRL since 60676. We haven't received any notice of why or when Samsung devices will receve the new PRLs.
2. 60677 had numerous problems. All throughout Florida people were reportedly not getting any data at all while roaming, let alone 3G Data while roaming. So 60678 was pushed out to fix the issue, but it disabled 3G Data roaming for the time being. It may be enabled later on down the road.
3. Manually changing you PRL will not break your phone...but expect your PRL to switch back as your phone does a daily check for updates to the PRL. That is why alot of the community was switched back to 60676 after manually updating to 60677.
4. If you get any type of corperate discount on your account, you will receive the 1115 PRL.
Whosdaman said:
Let me answer a few things first:
1. No Samsung device has received a new PRL since 60676. We haven't received any notice of why or when Samsung devices will receve the new PRLs.
2. 60677 had numerous problems. All throughout Florida people were reportedly not getting any data at all while roaming, let alone 3G Data while roaming. So 60678 was pushed out to fix the issue, but it disabled 3G Data roaming for the time being. It may be enabled later on down the road.
3. Manually changing you PRL will not break your phone...but expect your PRL to switch back as your phone does a daily check for updates to the PRL. That is why alot of the community was switched back to 60676 after manually updating to 60677.
4. If you get any type of corperate discount on your account, you will receive the 1115 PRL.
Click to expand...
Click to collapse
Why thank u for the answers, i know it will be pushed back as it happened to me after i did it manually, i was wondering if somehow the 1115 prl got posted could i update it that, in the only risk being its going to get pushed back?
BTW ill hit thanks for u when i get to a computer with the thanks button
davidrules7778 said:
Why thank u for the answers, i know it will be pushed back as it happened to me after i did it manually, i was wondering if somehow the 1115 prl got posted could i update it that, in the only risk being its going to get pushed back?
BTW ill hit thanks for u when i get to a computer with the thanks button
Click to expand...
Click to collapse
Yes the only rish is that it will be pushed back. Nothing else.
And you're very welcome
(I'm thinking about manually updating to 1115 for the time being.)
I manually updated mine to 1115.
I'm assuming they wont be able to roll it back on Epics like mine that have the DATA & PRL update "internal/unknown error" issue, that still isnt resolved. Mine has been sitting on 60677 since I manually updated it when it came out. (No choice, since the automatic update doesnt work.)
May be it's different on other people's though.
darkfire79 said:
I manually updated mine to 1115.
I'm assuming they wont be able to roll it back on Epics like mine that have the DATA & PRL update "internal/unknown error" issue, that still isnt resolved. Mine has been sitting on 60677 since I manually updated it when it came out. (No choice, since the automatic update doesnt work.)
May be it's different on other people's though.
Click to expand...
Click to collapse
Have you tried it recently? Mine started working last week. And that doesn't stop them from pushing a different PRL to your phone. Mine got pushed back while still getting the error.
darkfire79 said:
I manually updated mine to 1115.
I'm assuming they wont be able to roll it back on Epics like mine that have the DATA & PRL update "internal/unknown error" issue, that still isnt resolved. Mine has been sitting on 60677 since I manually updated it when it came out. (No choice, since the automatic update doesnt work.)
May be it's different on other people's though.
Click to expand...
Click to collapse
What kenny said, mine was broken after going to eco5 on my old phone and it still got pushed back and still didnt update, new phone updates tho
i might manually update, if people report that it helps a lot?
I get a 28% corporate discount and live in California. So will I get the new prl or only when I jet into one of the affected areas?
Sent from Bonsai 7.0.3
Thanks for the info! Is it possible to manually update then freeze the update process in titanium to prevent the roll back?
Can someone post a link to the 1115 PRL so we can try. Thanks.
kennyglass123 said:
Can someone post a link to the 1115 PRL so we can try. Thanks.
Click to expand...
Click to collapse
+1
Thanks.......
Why would I get 1115 on one phone and 60676 on the other
Sent from my SPH-D700 using XDA Premium App
darkfire79 said:
I manually updated mine to 1115.
I'm assuming they wont be able to roll it back on Epics like mine that have the DATA & PRL update "internal/unknown error" issue, that still isnt resolved. Mine has been sitting on 60677 since I manually updated it when it came out. (No choice, since the automatic update doesnt work.)
May be it's different on other people's though.
Click to expand...
Click to collapse
An RTN reset will fix those issues. I solved that internal error on my own at my store. My phone does it perfect everytime now.
Top Nurse said:
I get a 28% corporate discount and live in California. So will I get the new prl or only when I jet into one of the affected areas?
Sent from Bonsai 7.0.3
Click to expand...
Click to collapse
You will receive 1115, but California isn't effected. You can read everything in the attached documents in the first post.
rgregg504 said:
Why would I get 1115 on one phone and 60676 on the other
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Read post #3
kennyglass123 said:
Can someone post a link to the 1115 PRL so we can try. Thanks.
Click to expand...
Click to collapse
Answering myself. I got this from PPCGeeks:
And here is the thread on how to update manually:
http://forum.xda-developers.com/showthread.php?t=898628
And a link to QPST file needed:
http://www.filecrop.com/QPST-2.7-build-323.html
01117 was also released to folks in MS..which added 3g from verizon when attached to sprint voice. Not sure why since that area has 3g on the towers except for north MS. It also removes the 3g roaming in FL.
Full analysis and change logs for 60678 and 01115 are up on my site at www.batonrougebroadband.info
I just updated my wifes evo and it got the 1115 prl. I put the 60678 on my epic manually but if I try updating through the phone will I also get the 1115 or not for samsung no matter what?
Sent from my SPH-D700 using XDA App
digiblur said:
01117 was also released to folks in MS..which added 3g from verizon when attached to sprint voice. Not sure why since that area has 3g on the towers except for north MS. It also removes the 3g roaming in FL.
Full analysis and change logs for 60678 and 01115 are up on my site at www.batonrougebroadband.info
Click to expand...
Click to collapse
1115 is the latest, there is no 1117 yet...at least my managers EVO never received it.
evohog said:
I just updated my wifes evo and it got the 1115 prl. I put the 60678 on my epic manually but if I try updating through the phone will I also get the 1115 or not for samsung no matter what?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
1115 is the one you want. That is the one that enables 3G Data Roaming
I believe the 01117 was only sent to folks in southern MS. Not much of a difference between 01115 and 60678 except for the FL 3g roaming.
darkfire79 said:
I manually updated mine to 1115.
I'm assuming they wont be able to roll it back on Epics like mine that have the DATA & PRL update "internal/unknown error" issue, that still isnt resolved. Mine has been sitting on 60677 since I manually updated it when it came out. (No choice, since the automatic update doesnt work.)
May be it's different on other people's though.
Click to expand...
Click to collapse
It wont, definately not if your running custom roms. This release has been out for about a month in these states already, and also if you call and ask for them to refresh on their end, be prepared to get framework forcecloses, not reccomended!
also for Top Nurse
I get a 28% corporate discount and live in California. So will I get the new prl or only when I jet into one of the affected areas?
Click to expand...
Click to collapse
You wont need it, unless you travel to one of the affected states & Yes you can update while there as you are under a Heirarchy as an account type/ Corporate - Sub type/Individual, also to everyone else, if you are a BCS/Premier or Business/General Business or Public Sector account you too will get this - even if you dont receive a discout
BTW, This is not a Sprint error, rather a problem caused by higher Gods in the wireless world.

[Q] Roam Control?

Anyone successfully running ROAM CONTROL on Syndicate Frozen Rom? I cannot get it to work whatsoever. Tried uninstalling, reinstalling, but the software does not respond to "force roam". Wondering if its a compatibility issue with SFR.
i'm using it and it works flawlessly.
make sure you pick samsung in the settings of roam control.
I'm on SRF 1.1.1 if that matters.
working for me (on 1.1.1), perhaps clear data? or re instal? did u select samsung in the settings?
Are you in Texas? I contacted the roam control guy and he said that it won't work in Texas
Works for me, in Texas.. just depends on the ROM.
I'm in northern california. Samsung was selected as well. Ill try clearing data. Will thank all that contributed once I get on my computer, can't do it using xda app.
Sent from my SPH-D700 using XDA App
OMG, w00t w00t!
It works for me and thanks for turning me on to this app. Service in my area has been HORRIBLE!
Now it will work great.....on Verizon's network
how in the hell did i miss this roam contole?????? link please?
mcdeeandhisepic said:
how in the hell did i miss this roam contole?????? link please?
Click to expand...
Click to collapse
Roam Control
Is anyone able to get 3g speeds while using this App? It works fine on my Epic (rooted and running Bonsai 4.1.1 on EXT4), but data is 1x.
thanantos said:
Is anyone able to get 3g speeds while using this App? It works fine on my Epic (rooted and running Bonsai 4.1.1 on EXT4), but data is 1x.
Click to expand...
Click to collapse
this has been covered ad nauseum...
Sprint's roaming agreement w/ Verizon is for 1x data only, not 3G
there 'may' be a workaround/PRL hack but you'd have to search more for that answer because I just don't have it and I'm not gonna do the searching for ya
daddymikey1975 said:
this has been covered ad nauseum...
Sprint's roaming agreement w/ Verizon is for 1x data only, not 3G
there 'may' be a workaround/PRL hack but you'd have to search more for that answer because I just don't have it and I'm not gonna do the searching for ya
Click to expand...
Click to collapse
This.
It all depends on what PRL you're using. There is a PRL out there which will enable 3G roaming speeds, but few phones have it. You can manually update your PRL, but Sprint will usually roll you back within 24-48 hours. I've thought about manually updating my PRL, then freezing the service which allows it to be rolled back, but haven't gone through with it.
Reason being, I'm in Chicago and forced roaming on Sprint doesn't work in the Chicago area as stated by the dev of the app.
Works well up in Wisconsin, but not around here.
There's a thread somewhere about updating your PRL...search for it and read through it. That will tell you everything you need to know.
hayzooos said:
There's a thread somewhere about updating your PRL...search for it and read through it. That will tell you everything you need to know.
Click to expand...
Click to collapse
FTFY
I'm content being able to roam w/ 1x.. mostly when i roam its because I can't make a call or what have you..
for me, I'll be getting the 1015 PRL (or whatever it is for corp accounts) when it's rolled out..
hayzooos said:
This.
It all depends on what PRL you're using. There is a PRL out there which will enable 3G roaming speeds, but few phones have it. You can manually update your PRL, but Sprint will usually roll you back within 24-48 hours. I've thought about manually updating my PRL, then freezing the service which allows it to be rolled back, but haven't gone through with
There's a thread somewhere about updating your PRL...search for it and read through it. That will tell you everything you need to know.
Click to expand...
Click to collapse
I've changed my prl over two months ago and they.switched me back to sprints after about 3 weeks. I chanced it back after, to what I wanted and haven't been switched back at all. Maybe the roll backs are location based? A lot of people say they get forced back to a sprint prl but I never do
Sent from my SPH-D700 using XDA Premium App

Categories

Resources