i need the program if anybody can give it to meao i can make my start menu easy to manage because i just download the open touch 4.0 thanks
Go to:
Start, Settings, Large Start Menu.
Uncheck the option and your finished.
Related
Hi Folks,
I have just upgraded the ROM using ROMKitchen (3.17.03 ENG O2-Euro). Now, the phone icon does not appear in the main window, tough it works when I go to Start--Phone--. Can someone please tell me how I can get this phone link back on the main menu.
Thanks a lot,
Frank
Why don´t press you the green "Phone" button? It starts the phone-application automaticly.
Or just edit the startmenu settings...
Start -> Settings -> Menus
select the phone application.
Regards
Stefan
Hi,
I have lost all my contacts on outlook, and on my ppc , the only way to have it back is by trying to extract it from .stg file saved on my PC. I have tried to use STGviewer which can extract individual files from an ActiveSync backup, but STGviewer doesn't allow restore of anything in the Pegasus Database, derictory where Contacts Database folder is stored. How can I do it???
HELP!
Thanx!
have you googled for a program which could access the Pegasus Database and you could extract the data yourself and type it into outlook and sycn with your device and then
from now on export the outlook *.pst file as a backup
Try this...
http://hometown.aol.com/anyware/wce/MobileVault/download.htm
I had a very similar problem and this program was the only one that worked.
Before starting the steps below place your XDA in the cradle and wait for it to sync.
Steps;
1. Install attached software
2. Run MobileVault from 'Start > Programs > MobileVault > MobileVault'
3. Click on the'File' menu and then 'Open'
4. Browse to 'My documents' and select 'backup1.stg'
5. Once file has opened click on '+' next to the small computer icon in the left hand panel
6. Click on 'WinCE Databases' folder
7. Right click on the 'Appointments Database' in the right hand panel and select 'Restore to Desktop'. This will pop-up a window, select the desktop and then click 'Ok'
8. Repeat step 7 for the 'Contacts Database'
9. On your desktop a new folder will have been created called 'WinCE Databases'. There will be two files - send these both to me.
10. Repeat steps 7-8, but this time select 'Restore to Mobile Device'. In theory this should restore them to your pda.
If step 10 doesn't work, then;
11. Remove the xda from the cradle
12. On the xda, click on the start menu and select 'ActiveSync' (if its not in the menu it will be in the programs option)
13. Select the 'tools' menu at the bottom of the screen and then select 'Options...'
14. Click on the 'Options...' button, and untick the 'Enable PC sync using...' option beneth the 'When cradled' text.
15. Click on the 'Ok' to the top right of the screen, and then repear for the next screen, finish by clicking on the 'X'
16. Now place the XDA back in the cradle - it shouldn't sync now.
17. Repeat step 10, and see it it works. Fingers crossed!!
Good luck...
@divingsheep
Thank you very much I solved my problem!!!
real solution
http://forum.xda-developers.com/viewtopic.php?p=123648#123648
hey guys, i know this thread is old, however I need your advice for this problem. I have used Mobilevault in the past to restore my databases, however, when I tried to do this today, I encountered the application has been changed completely, not allowing me to do the restore. Am I right by saying there is no way to restore the databases? This would leave me really upset! Not everyone wants or is able to use Outlook to manage Contacts, so it really should be Microsofts duty to provide a solution regarding this.
HELP
I installed WM2K5 V1.60, happy as a baby.
But by installing the first ppc-program the mda2 won’t reset
I try anything also put the battery out and in it stays at the same screen, see attachment...PLEASE HELP
Do you mean it wont go back to WM2003 ?
If so then , thats because you have installed a new ROM ont your phone ... it will never be able to return to the old WM2003 you used to see when doing a hard reset because that software has been overwrote by the new WM2005 ROM.
There most likely will be a way to downgrade to WM2003 though.
If thats not what u ment then im sorry for talkin crap
You are saying it is sticking on the boot screen, but it was ok until you installed a program? Which program did you install?
try to format storage
you better go tho the wiki page and find how to hard-reset
then go to the boot menu and format the storage i beleave that will solve it
The program that I installed was the [email protected]#$% “MobiMate WorldMate 2005 Professional V3.0.20”
I let the battery out for the night and I tried this morning,
I know I was desperate so you try anything
I try also to overwrite the WM2k5, no contact with the mda2.
If the picture (see attachment) is showing the “hard reset” then I don it, without result...it sty at the start screen (see above)
If hard-reset is other combination, then please show me
Guys please help
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
pschoch said:
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
Oh man, you are an angel
Respect, for the master, who bring my mda2 back to life
Giga thanks mate
Hi,
I'm using Dutty's ROM V3.0 with the new WM6.1 start menu.
But I was a bit to fast with tweaking the programs menu.
I accidently removed the Settings button.
But you can't restore it, you can only add programs.
Does anybody know how I can restore the Settings button in the Start Menu.
Assume you're talking about the new program launcher and not the classic menu.
HKLM\Software\HTC\Manila\ProgramLauncher\3
Command: --switchtopage Manila://settings.page
DispName: [[IDS_SETTINGSTITLE]]
IconPath: \windows\HTC\Assets\Images\programlauncher\Program_icon\settings_88.qtc
IsReadOnly:1 (Hex) (so you will not be able to delete accidentally in the future)
Path: \Windows\manila.exe
That worked, I've got the settings option back!
Thank you very much!!
how do i get to link 'all settings' on the new manila start menu rather than pointing to the settings tab ? does anyone know the exact path or a lnk file?
Thanks, all works perfectly
Main Settings in Start Menu instead of Manila settings
How can i register tweak this.....
PLS HELP......
Hmm, I know this is possible but unfortunately I have installed a custom rom which already has this functionality and I cant seem to find the setting that enables/disables it.
if you go to the manilla settings and click menu> All settings you will get the windows mobile settings window.
I will try and find this information somewhere.
Install BsB tweaks, there's a setting for this...
dragmark said:
Install BsB tweaks, there's a setting for this...
Click to expand...
Click to collapse
Thanks Dragmark for the info but that does not work for me...
Need the Reg edit......
BT73
Has no one the solution for my problem ....
BSB does not work....
No one with a solution...
I just one the original settings not the manila settings when i push on settings in the start menu...
If you cannot make it work with bsb, then just use the way around...
Hit start -> settings -> menu -> advanced, and there you go
se1988 said:
If you cannot make it work with bsb, then just use the way around...
Hit start -> settings -> menu -> advanced, and there you go
Click to expand...
Click to collapse
Thanks for the useless...comment....