Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Well, i have send a mail to Piel Frama, i was wondering of they are also
making a perfect in leader build case for the Ameo or HTC, i got a nice
reply returned.
So let's wait for the good news
Dear Tidde,
First of all I would like to thank you very much for your interest in our
products.
Regarding your question, we have to inform you that we have just received a
device for this model, and we have just started the manufacturing of the
first sample case for this device, so, we will have cases available for this
model in about 15 days. Don’t hesitate that we will put in contact you as
soon as we have the first sample case finished.
Please feel free to contact us for everything you need from us.
Very best regards and have a nice week!!
Rubén Montero
Export Manager.
Http://www.pielframa.com
Nice. I also emailed Ruben yesterday asking the same question.
Maybe we should use this time to provide this vendor with some input. Request things we would like to see in an Athena case by compiling a list from interested members then send this to Ruben. What do you guys think about the idea?
ltxda said:
Nice. I also emailed Ruben yesterday asking the same question.
Maybe we should use this time to provide this vendor with some input. Request things we would like to see in an Athena case by compiling a list from interested members then send this to Ruben. What do you guys think about the idea?
Click to expand...
Click to collapse
Great idea.
First request has to be - magnets to hold the keyboard in the case, and not a nasty plastic sheath like on the otherwise excellent PDair case.
Belt clip...suggestions to Piel Frama.
Of course, we must have a belt clip.
No plastic cover for the screen please. I haven't had a case that has plastic for the screen that I've liked. I always ended up cutting out the plastic. I like using the screen protectors better and allows you to actually tap the screen without issues.
Place a plastic see through "window" on the case to be able to view the "status bar" when the phone is "closed". I would like to be able to see this area when having the phone closed while in its case.
Mesh covering on the speakers. I don't like to cover the speakers at all but would like a mesh covering to protect it without hindering the sound.
If I think of more items I'll post them.
Edit #1: No flap (closing snap or whatever it's called) on the case please. As with the original case, this isn't needed and I see most others have this. It just gets in the way and is annoying and not necessary for this phone.
Edit #2: Maybe a plastic insert for the clear plastic end of the keyboard to avoid scratches on the device. This is a bit stretching it but I'm posting the recommendation anyhow.
ltxda said:
Of course, we must have a belt clip.
No plastic cover for the screen please. I haven't had a case that has plastic for the screen that I've liked. I always ended up cutting out the plastic. I like using the screen protectors better and allows you to actually tap the screen without issues.
Place a plastic see through "window" on the case to be able to view the "status bar" when the phone is "closed". I would like to be able to see this area when having the phone closed while in its case.
Mesh covering on the speakers. I don't like to cover the speakers at all but would like a mesh covering to protect it without hindering the sound.
If I think of more items I'll post them.
Edit #1: No flap on the case please. As with the original case, this isn't needed and I see most others have this. It just gets in the way and is annoying and not necessary for this phone.
Click to expand...
Click to collapse
personally, i think most of the Athena owner won't really want belt clip, it's too heavy and big to use it that way, and also most importantly, there is just no suitable place to allocate the belt clip, if the belt clip is under the screen, then the surface is not flat anymore therefore you can't use the keyboard.
Personally, i think 80% that Piel Frama Case won't have a belt clip.
p.s. I know a few members here in this thread will want to prove me wrong, well, all i can say is time will tell.
The great thing about the Piel Frama cases is that the clip is optional. You don't have to attach it if you don't want to. If you do want the clip, you pop out a little plastic thingy and screw in the clip "wheel" and use a clip...so this solution will work for all...hopefully.
Edit: Here's an animated GIF of how the clip system works on their cases... http://www.pielframa.com/Animaci%F3n%20grande%20pinza%20super%20nueva.gif
tvrman said:
Well, i have send a mail to Piel Frama, i was wondering of they are also
making a perfect in leader build case for the Ameo or HTC, i got a nice
reply returned.
So let's wait for the good news
Dear Tidde,
First of all I would like to thank you very much for your interest in our
products.
Regarding your question, we have to inform you that we have just received a
device for this model, and we have just started the manufacturing of the
first sample case for this device, so, we will have cases available for this
model in about 15 days. Don’t hesitate that we will put in contact you as
soon as we have the first sample case finished.
Please feel free to contact us for everything you need from us.
Very best regards and have a nice week!!
Rubén Montero
Export Manager.
Http://www.pielframa.com
Click to expand...
Click to collapse
I'm e-mailing Ruben now asking him to check out this post.
Well done, hopefully he will look here and see what options are possible as they go to design? I definitely DO want a belt clip, as where I work I need both hands, but would like the Ameo handy when it's needed!!
Tim
I want:
Mostly as per the PDair case - I like the protection at the front of the Ameo.
Magnetic keyboard attachment, magentic, slide or push clip latch to keep it closed.
Belt loop, or another method of attachment that doesn't leave a component on the case. No pegs.
I don't like the status bar, I don't "use" it per se. It wastes backlight, running the whole screen, and isn't visible in the case anyway.
Of course, I really want it to be Not As Good (or just the same) as the PDair case, so I don't end up spending YET MORE MONEY!
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
TigerTim36 said:
Well done, hopefully he will look here and see what options are possible as they go to design? I definitely DO want a belt clip, as where I work I need both hands, but would like the Ameo handy when it's needed!!
Tim
Click to expand...
Click to collapse
Do me a favor and also e-mail him to refer him to the post so he sees more interest in customization of this case.
Thnx
jeffharris said:
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
Click to expand...
Click to collapse
I actually wear pants that fit like they are supposed to.
For me, the three things I'm looking for in a case are:
1) Something like the pdair case covering the housing of the phone in leather so the keyboard plastic bit doesn't scratch the screen.
2) Clip/latch to hold the thing shut.
3) Magnetic keyboard holder.
I personally don't need a belt clip, but any company that made it optional would probably be selling a lot of cases at the moment!
P.S. Has anyone noticed that Proporta are working on a case at the moment? It's on their website, but sadly no pictures yet.
All good idea to refer him to this post.
The belt option is no solution for this type of device i thinks
indead to carry a brick on you pants is not the way.
I think there should be made a wallet like case with the option to take
also some memory cards and other stuff in it, indead avoid the plastic
holder for the keyboard.
this case looks very nice.
http://www.pielframa.net/texas_instruments_voyage200.asp
let see where they come's up with..
I think that a belt clip or at least an option to have one would be a great idea. Would mean that the case would appeal to more customers from a marketing side of things. I would wear mine on a belt clip at work and then prob put in my pocket in the evening.
I wonder if anyone would make a leather case just for the screen without the keyboard? Id like to just carry the screen around without the keyboard, yet id be worried about the screen being protected when in my pocket.
So funky new case is a great idea, lets hope and im sure it will be a smart case
i'm looking for pielframa's UNIVERSAL PDA CASE BLACK fit to the athena (perfect would be a seperate pocket for the keyboard).
A case for parts of the Athena
The case that comes with Athena is very good when you want the whole thing with you. What I would like is a case that allows me to only take the phone part, not the keyboard. Something slim that protects the screen. It would allow me to safely take the Athena with me when space is sparse.
//Johan
joohan said:
The case that comes with Athena is very good when you want the whole thing with you. What I would like is a case that allows me to only take the phone part, not the keyboard. Something slim that protects the screen. It would allow me to safely take the Athena with me when space is sparse.
//Johan
Click to expand...
Click to collapse
Completely agree with you just what im looking for.
That's what they invented "belts" for?
jeffharris said:
Man, don't you peoples' pants/trousers ever fall down from weighty clip ons? There's NO WAY I could clip the Athena. My pants would come down to my knees!
Click to expand...
Click to collapse
"Belt Clip"? You know, those things that hold yer kecks up? I have the Ameo in my backpocket, and it JUST fits, but I can't sit down with it...
Belt clips rule...
skoop99 said:
"I have the Ameo in my backpocket
Click to expand...
Click to collapse
omfg, a 800$ device in your backpocket?
what happens if you forget the ameo for one second and try to sit down ?
Krusell finaly announced a case for the TytnII I think these are the best casses in the market I have used on with the K jam,then the Jasjam and I will order this one when it becomes available later this month.
http://www.krusell.se/product.php?productID=2774
Wow, thanks. I've been waiting for Krusell to come out with a case for the TyTN II. I have sent an email to my local vendors right away.
Thanks,
Phil
Man that case does look nice, i hope it isn't to bulky
ekw said:
Man that case does look nice, i hope it isn't to bulky
Click to expand...
Click to collapse
That's my only worry. I agree they do look like very good cases, but I'd really like a case that protects without making the phone 50% thicker!
Krusell cases are excellent value for money - I've used them for years
Squeaker said:
That's my only worry. I agree they do look like very good cases, but I'd really like a case that protects without making the phone 50% thicker!
Click to expand...
Click to collapse
I agree. My last phone was the Palm Treo 650 and after removing the phone after having it in my Krussel case for awhile, I was surprised how small my phone felt 'nude'.
Cheers,
Phil
Personally the only thing I miss from my old Jasjam is the Krusell leather case I find it hard to use with the supplied case and always fear dropping it
Squeaker said:
That's my only worry. I agree they do look like very good cases, but I'd really like a case that protects without making the phone 50% thicker!
Click to expand...
Click to collapse
I have tired to find cool slim cases for my Wizard and Hermes with NO luck. Some of the better leather cases that are thin do not work well as the phone can slide out (when moving fast or coming down stairs) and the uber cool two piece plastic case (this case was cool as you can slide open keyboard without having to open anything - face is always visible too) I found a few months ago was cool until the plastic would no longer keep the phone in the case and would fall right out. Between the Wizard and Hermes, I have owned about 15 cases including the Aluminum cases. All are a bust! I just ordered the Krusell tonight (will ship Next Day Air tomorrow) and will settle for a thicker case in which my phone will NEVER get damaged. I will provide feedback on Wednesday when it arrives..
L8..
Images of Krusell Case and my Tilt!
I am a case freak and have purchased every case under the sun (pouches, Aluminum, two piece snap-on case and many many more) for my Wizard and Hermes in the past. It really surprises me that NO ONE can make a good case that allows the PDA/Phone to be FUNCTIONAL while providing good protection. Today my Krusell arrived. Before purchasing I was mixed on the main flap that covers the entire phone when closed. I like to be able to glance at my phone to see incoming calls, emails and text messages.
Anyway, the case is well made and the phone fits firmly into the case (which means phone will not fall out). I do not like the fact that the clip is placed "high" on the rear of the case. When sitting one must becareful not to break the clip. Running with the phone attached could be an issue as well with the clip placement high. Unforunately you have to unsnap the 2nd smaller flap to slide the phone open for keyboard use. I have dealt with this in the past and will probably be ok with it. Bottom line is the case protects the phone very very well. In the past I have found good functional cases that did not protector or hold the phone well. Images are below. Sorry for the poor lighting as I took these at work. I have a photo light at home and will take better images tonight.
L8
More Images
Thanks for the pics! I was hoping someone would get this case and post some pics. You can't always rely on the sellers pics.
I am a real big fan of the Krusell cases. I think you will be hard pressed to find better made product. Having said that, I just can't warm up to this case. If it was more like the one for the 8525 I would buy it in a second. It fit my "needs" on the 8525 perfect for how I use the phone. Plus I didn't have to lift a single flap to operate it. This one for the Kaiser/Tilt does, and you have to flip open two flaps to use the keyboard.
I guess I will pass on this one.
Maybe I need to get the thread, needle and some fine Corinthian leather out and make my own.
GWelker62 said:
Thanks for the pics! I was hoping someone would get this case and post some pics. You can't always rely on the sellers pics.
I am a real big fan of the Krusell cases. I think you will be hard pressed to find better made product. Having said that, I just can't warm up to this case. If it was more like the one for the 8525 I would buy it in a second. It fit my "needs" on the 8525 perfect for how I use the phone. Plus I didn't have to lift a single flap to operate it. This one for the Kaiser/Tilt does, and you have to flip open two flaps to use the keyboard.
I guess I will pass on this one.
Maybe I need to get the thread, needle and some fine Corinthian leather out and make my own.
Click to expand...
Click to collapse
I agree with you on the functionality (to many flaps).. But for the meantime I will use for protection therefore my search "will" continue.. Your IDEA of making your own case is good. So hard to find a good case for any Phone these days.
I do like this one: https://www.noreve.com/product_info.php?products_id=2069
L8
Will give it a shot next week when it ships.....
Has anyone purchased and received the Noreve Kaiser case yet?
Would be interested in seeing how it works. I'm still using my Krusell horizontal pouch that I used with the 8525 and it makes the device easily accessible rather than having to open many things to access the device like the book cases.
species8472_rules said:
I agree with you on the functionality (to many flaps).. But for the meantime I will use for protection therefore my search "will" continue.. Your IDEA of making your own case is good. So hard to find a good case for any Phone these days.
I do like this one: https://www.noreve.com/product_info.php?products_id=2069
L8
Will give it a shot next week when it ships.....
Click to expand...
Click to collapse
Ya but that's like a $80US case!!! Where can I get it cheaper?
species8472_rules said:
More Images
Click to expand...
Click to collapse
That case just completely blocked the rear camera altogether ???
UnicornKaz said:
That case just completely blocked the rear camera altogether ???
Click to expand...
Click to collapse
Yes, I FORGOT to mention that. Have no idea why?
h0mersimps0n said:
Ya but that's like a $80US case!!! Where can I get it cheaper?
Click to expand...
Click to collapse
I have no idea where to get cheaper.. I will spend some time in the next few days attempting to find where (if any).
UnicornKaz said:
That case just completely blocked the rear camera altogether ???
Click to expand...
Click to collapse
nah... scroll further down the page and you will see that the camera is not covered
hangyong said:
nah... scroll further down the page and you will see that the camera is not covered
Click to expand...
Click to collapse
I guess you can expose the camera.. I never noticed.. I did not notice that you can pull the rear of the case down to expose the camera and speaker (the magnet is pretty strong).
h0mersimps0n said:
Ya but that's like a $80US case!!! Where can I get it cheaper?
Click to expand...
Click to collapse
Try the US site for Noreve. It's "only" $45:
http://www.noreveusa.com/product/ATT_Tilt_-_HTC_P4550_-_HTC_Tytn_2_Tradition_leather_case.html
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Someone has pointed this one out in another thread, it looks nice but they said they could find it for like $15... which I havent been able to do...
http://store.mobilitytoday.com/content/accessories/4-120--3196.htm
tfdeere said:
Hi all,
I have a case question for you. And it deals with a specific type of case, so that's why I didn't use one of the other threads. I'm looking for a pouch for my Tilt. Like the Krussell Vertica. What I'm after is a vertical leather pouch, that is made just for the tilt only. I can find all kinds of universal ones out there, but they all too big since they fit the HTC apache (6700) I'm after something that fits the tilt snugly. Here's a couple I've found so far:
http://www.tiltdepot.com/krusell-vertica-multidapt-s-wide/4A25A1414A2.htm
http://cgi.ebay.com/MONACO-BLACK-LE...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've looked at the sensa pouch cases as well. Can anyone recommend a good one that isn't made for all kinds of phones? any ideas? Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
A friend of mine has his Tilt in a case like you are describing... I think he said it was actually a Treo 750 case, but his Tilt fit perfectly.
-Jay
I have posted this in this forum before. The Treo 680/750 is within a mm of the dimensions of the Tilt. Any Treo pouch fits like a glove on the Tilt. I am currently using a fitted Treo pouch as my main phone holder.
You can get that Cellet case for less than $11.00 on Amazon.com. I bought one today.
http://www.amazon.com/exec/obidos/t..._shr?_encoding=UTF8&m=A3UW6FFMODPQYZ&v=glance
Thanks Gaby... I was looking for one that said Tilt... didnt know the Treo one would work... I likey the price... I wonder what the clearances would need to be if you have the rubberized case on the Tilt
Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625
I received my Cellet case from Amazon. My Tytn ll has a rubberized hard case and it fits perfectly inside it.
I need to say this case is beautiful... For $6.00 plus shipping is a great buy.
Tilt/Kaiser Cases
jpofsc said:
Just picked up this case at Bestbuy... fits nice and should have enough room for when I put on the hard skin...
http://www.bestbuy.com/site/olspage...+case&lp=2&type=product&cp=1&id=1166840037625
Click to expand...
Click to collapse
I have that HTC one from best buy listed above, it fits prefectly, has 2 magnets holding the flap closed and the belt clip is metal. It also has a soft velvet interior to resist scratches.
Would be nice if the clip had a double lock on it, though.
~~~
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Just be carefull until it stretches, it had the tendency of catching the stylus, doesn't anymore though.
~~~
Both are a bit pricey, but considering the cost of the phone, I wouldn't trust those $9.95 specials, unless I could get my hands on it first. My friend found a $10 version of the HTC one, but the leather on it feels like it would wear down and rip pretty quickly.
NiteStalker said:
Another I really like is this one; from at&t.
It is in the "Universal Cell Phone" category at the store, at first it was too small, but after a few hours use, it stretched to fit my tilt like a glove. This one makes a real nice case if you need something a little more rugged, its clip made of a heavy (pvc like) plastic that double locks around your belt, making it impossible to accidently come off. The "Ballistic" Canvas has a quality feel and the velcro feel like it will last, not the cheapstuff.
Click to expand...
Click to collapse
This case is actually made by Nite Ize, and it is available on Amazon. The LARGE size fits the Tilt best compared to SMALL or PDA/Smartphone. The magnet version is also better than the velcro one.