how do I get the camera to use the storage card? - 8525, TyTN, MDA Vario II, JasJam General

I'm running WM6.
I can't seem to find the setting for it...when I go to the camera and try the Capture Settings->Storage setting it only lists "Main Memory" and "Network".

trendal said:
I'm running WM6.
I can't seem to find the setting for it...when I go to the camera and try the Capture Settings->Storage setting it only lists "Main Memory" and "Network".
Click to expand...
Click to collapse
If you have the hermes set to show the network then it will not offer the storage card as an option. Just disable network view and storage card will appear in the camera application.
Copied from an earlier post of mine:
Now unfortunately the camera is only capable of saving to one of two locations at any one time so:
If the view network folder is NOT enabled you will be offered:
"Main" or Storage card" and once set it will remember your choice and not ask again.
BUT with Network folder enabled and a storage card inserted you will:
be asked if you want to use "StorageCard" every time you start Camera, but in camera tools you will only be offered "Main" or "Network" even if you chose the card. It will not set to storage card even if you said you wanted this when camera started.
So, if you want to use main memory with a storage card inserted and don't want the silly question about using storage card each time, then you must disable the network folder. (Use Resco or File Commander to do this - forget now if regular File Explorer does it)
Equally if you want to save to storage card you will also need "network" folder disabled otherwise it will save to Main memory even when you say yes to Storage Card on start up of application.
The default setting for the Network folder is disabled, so if you are having problems it is likely to have been enabled by using the likes of Resco or Total Commander.
Mike

Seems kind of silly, what do you think the reasoning behind that setup is?

trendal said:
Seems kind of silly, what do you think the reasoning behind that setup is?
Click to expand...
Click to collapse
Don't assume reasoning had anything to do with it!
Mike

Oh I get it

trendal said:
Seems kind of silly, what do you think the reasoning behind that setup is?
Click to expand...
Click to collapse
Probably along the lines of "2 choices ought to be enough for anybody!"

YorYor said:
Probably along the lines of "2 choices ought to be enough for anybody!"
Click to expand...
Click to collapse
And that's one too many for some of us
Mike

Related

Dopod 818pro camera seting can't save to SD card

Help please someone.
I can't seem to set the camera to save to save on SD card. the only option is main memory and network. I use registry hack so that network apear as a folder. it's courius that network would show up in camera settings but not storage card...
Does anyone know ways to go arround this.
Help appriciated
Huh, I have not found a place where to say the camera a folder to save photos, just the choice of the two: "Main Memory" and "Storage card". As I said to place to the storage card the camera stops to save pictures.
I found that I need to create right folders on the Storage card, from the SD root should be "My Documents", within one should be "My Pictures", just like frome the device root. As I created the folders, camers started to save pictures to "My Pictures" on the SD.
I guess the path is hardcoded, so you just can change the root. Am I wrong? Someone knows how to change the path?
It's just that the camera app is a little screwy. Basically if you disable the network patch you will be able to save to the Storage Card again. The same happens if you enable the extended rom as visible.
I can't remeber the exact cause in detail, but essentially the app looks for the first 'Special Folder' and it displays that plus 'Main Memory'. It assumes that the only 'Special Folder' will be the storage card which in most cases is true but as you found, not all!
Anks said:
It's just that the camera app is a little screwy. Basically if you disable the network patch you will be able to save to the Storage Card again. The same happens if you enable the extended rom as visible.
I can't remeber the exact cause in detail, but essentially the app looks for the first 'Special Folder' and it displays that plus 'Main Memory'. It assumes that the only 'Special Folder' will be the storage card which in most cases is true but as you found, not all!
Click to expand...
Click to collapse
Ahhh I C... it really sucks tho... hope someone could find a registry hack for this...
Anyone???
this is really annoying
Anks said:
It's just that the camera app is a little screwy. Basically if you disable the network patch you will be able to save to the Storage Card again. The same happens if you enable the extended rom as visible.
I can't remeber the exact cause in detail, but essentially the app looks for the first 'Special Folder' and it displays that plus 'Main Memory'. It assumes that the only 'Special Folder' will be the storage card which in most cases is true but as you found, not all!
Click to expand...
Click to collapse
You're rite. I can't save pictures on SD card. The only option is Main memory and ExtROM2.
Waiting for someone's help.
Munyuk81 said:
Ahhh I C... it really sucks tho... hope someone could find a registry hack for this...
Anyone???
this is really annoying
Click to expand...
Click to collapse
hehe...gw juga pake Dopod 818 Pro...ada pilihan buat "Storage Card", tapi begitu di-"jepret", dia masuknya ke Main Memory...gimana ya???
hehe...I also use Dopod 818 Pro...there are option for "Storage Card", but...when it's shutter button pressed, the image is saved to Main Memory...
this is really annoyimg :x
Camera Image saving
My problem was I could not save images or video files to storage card (or main memory). My Ext ROM is still NOT Unlocked so I still have the Storage card option in the Camera Settings.
I have checked the Registry keys and they were correct. Eventually, I doubted the folder in the SD Card (My Documents\My Pictures) as it was created before the last ROM upgrade. I deleted the folder My Documents in the SD card and tried the camera again on Photo and Video and the problem was solved, even with saving to the Main Memory although I did not do anything with its folders. The Camera program created the folders again in the SD Card. My assumption that it tries to create the folder but it could not as they were already there and did not flag with error message. I noticed the same behaviour in PCs.
I had similar problems with Words and Camera even with older PPC's when using the SD card.
Registry keys should be:
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
= 1
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\SaveFolder
= My Pictures
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Video\Saveto
= 1
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Video\SaveFolder
= My Videos
I heard about the issue with the absence of the Storage Card from the Camera Settings after Unlocking the Ext. ROM and I wonder if the above key value should change to 2 or 3 as the folder structure (logical drives) changes from 0-Main Memory, 1-Storage Card to 0-Main Memory, 1-Ext ROM, 2-Storage Card. (Try it at your own risk as I have not done this)
Re: Camera Image saving
-------------------------------------------------------------------
Re: Camera Image saving
Dieselman said:
My problem was I could not save images or video files to storage card (or main memory). My Ext ROM is still NOT Unlocked so I still have the Storage card option in the Camera Settings.
I have checked the Registry keys and they were correct. Eventually, I doubted the folder in the SD Card (My Documents\My Pictures) as it was created before the last ROM upgrade. I deleted the folder My Documents in the SD card and tried the camera again on Photo and Video and the problem was solved, even with saving to the Main Memory although I did not do anything with its folders. The Camera program created the folders again in the SD Card. My assumption that it tries to create the folder but it could not as they were already there and did not flag with error message. I noticed the same behaviour in PCs.
I had similar problems with Words and Camera even with older PPC's when using the SD card.
Registry keys should be:
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
= 1
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\SaveFolder
= My Pictures
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Video\Saveto
= 1
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Video\SaveFolder
= My Videos
I heard about the issue with the absence of the Storage Card from the Camera Settings after Unlocking the Ext. ROM and I wonder if the above key value should change to 2 or 3 as the folder structure (logical drives) changes from 0-Main Memory, 1-Storage Card to 0-Main Memory, 1-Ext ROM, 2-Storage Card. (Try it at your own risk as I have not done this)
Click to expand...
Click to collapse
.
There's only 2 options: 0 or 1. If you change that key to 2, SaveTo will be empty/blank. I tried it.
Re: Camera Image saving
chensayno said:
There's only 2 options: 0 or 1. If you change that key to 2, SaveTo will be empty/blank. I tried it.
Click to expand...
Click to collapse
Thank you for the feedback.

Tytn picture saving.

Hi.
Just got my Tytn and when using camera it asks me if I want to save pictures to sd card,so I select yes.But when I take a photo it saves to internal memory.
Also,when pressing the icon at the top of the camera screen to change storage location,nothing happens.
Any ideas?
liverman666 said:
Hi.
Just got my Tytn and when using camera it asks me if I want to save pictures to sd card,so I select yes.But when I take a photo it saves to internal memory.
Also,when pressing the icon at the top of the camera screen to change storage location,nothing happens.
Any ideas?
Click to expand...
Click to collapse
Common little problem this where it will repeatedly ask if you want to save to storage card but then defaults to main memory. There can be more than one cause. First thing to try is removing and reinserting sd card and soft resetting perhaps more than once, each time telling camera to use storage card.
Can be due to having network folder enabled, but try above first.
Mike
Same problem here
I have the same problem. When I choose "Storage card" in the options of my camera, it selects "storage card" OK but immediately forgets the setting (when I OK it and then return to options).
I've tried a couple of soft resets, and there is no difference. Help!
bobbyelliott said:
I have the same problem. When I choose "Storage card" in the options of my camera, it selects "storage card" OK but immediately forgets the setting (when I OK it and then return to options).
I've tried a couple of soft resets, and there is no difference. Help!
Click to expand...
Click to collapse
When you are in camera>tools>capture settings do you get an option to save to "network" ? Also have you tried taking SD card in and out with device switched ON followed by soft reset?
I ask about network being given as an option because AFAIK the camera only allows two possible settings for storing data. If the network folder is enabled it will always offer network or main as storage. If network folder is disabled you will get SD card or main (unles you have one of those flakey cases where card is not always recognised)
There is a registry tweak to enforce the choice of Card or Main even when network folder is enabled. (Blowed if I can find it now, but it's on this forum somewhere/wiki?)
Mike.
Mike
Thanks a lot!!
It was the network folder being active in Resco Explorer.
Changed the setting back to network root and now can switch between card and internal memory at will to save my pictures!
Cheers again.
liverman666 said:
Thanks a lot!!
It was the network folder being active in Resco Explorer.
Changed the setting back to network root and now can switch between card and internal memory at will to save my pictures!
Cheers again.
Click to expand...
Click to collapse
No probs, glad it's working.
Mike
mikechannon said:
When you are in camera>tools>capture settings do you get an option to save to "network" ? Also have you tried taking SD card in and out with device switched ON followed by soft reset?
There is a registry tweak to enforce the choice of Card or Main even when network folder is enabled. (Blowed if I can find it now, but it's on this forum somewhere/wiki?)
Mike.
Mike
Click to expand...
Click to collapse
Thanks for the suggestions Mike.
No Network option - only Main memory and Storage card. Tried removing card and soft reset - still doesn't remember my choice of default storage (the setting is lost as soon as I exit 'Options').
Don't suppose you know where I could find that registry tweak?
bobbyelliott said:
Thanks for the suggestions Mike.
No Network option - only Main memory and Storage card. Tried removing card and soft reset - still doesn't remember my choice of default storage (the setting is lost as soon as I exit 'Options').
Don't suppose you know where I could find that registry tweak?
Click to expand...
Click to collapse
Might get another chance to look tonight but at present I cannot find it! - though I did read it somewhere. BUT I'm not sure it'll work for you as it is already giving you the option of "storage card" rather than "network" as some folks have. Might be worth trying but question is why is your setting not sticking?
I suppose the old hard reset is something you really want to avoid!! although that might be your only option.
Suggestions needed from others please.
EDIT: Just had a thought. Some applications only like to save to specific locations. If you have not done so, try creating a folder on the root of your storage card called "My Documents" inside this folder create another one called "My Pictures". Then try again - worth a try.
Mike

Problems associated with Resco explorer networking

I have just solved two major annoyances. My camera could not save to Storage Card, and Pocket IE was ignoring the registry tweak to use cache folders on the Storage Card. It turned out that Resco Explorer was behind it, I'd set it to use a folder called "Network" within "My Device" rather than creating a "My Network" entry at the same level as "My Device". Changed it back, reboot, and now both camera and PIE use the Storage card.
I found this while searching here for the camera prob, but didn't expect it to sort the PIE problem as well so I thought I'd flag it up here.
Now I just need to figure how to make TCPMP see the network!
patp said:
I have just solved two major annoyances. My camera could not save to Storage Card, and Pocket IE was ignoring the registry tweak to use cache folders on the Storage Card. It turned out that Resco Explorer was behind it, I'd set it to use a folder called "Network" within "My Device" rather than creating a "My Network" entry at the same level as "My Device". Changed it back, reboot, and now both camera and PIE use the Storage card.
I found this while searching here for the camera prob, but didn't expect it to sort the PIE problem as well so I thought I'd flag it up here.
Now I just need to figure how to make TCPMP see the network!
Click to expand...
Click to collapse
Yep! that's right camera only allows two locations to store pictures. So when "network" is enabled by any prog e.g Resco and others the camera will offer either Main or Network as the locations. Without Network enabled it offers Main or Storage Card. Until your post had not realised it also applied to PIE as well.
Mike
maybe changing the name of the memory card will work... ''Memory Card" insted of "Storage Card"....then Memory Card should come before Network M<N
I have kind of the opposite problem... Randomly when I reimage my phone and install Resco, network will NOT show up in my file directory. So far, the only solution I have done that works is to reimage it and install it again... anybody else had this weird occurance?
lacroixdp said:
I have kind of the opposite problem... Randomly when I reimage my phone and install Resco, network will NOT show up in my file directory. So far, the only solution I have done that works is to reimage it and install it again... anybody else had this weird occurance?
Click to expand...
Click to collapse
Possibly, there is a post spmewhere where someone identified the registry settings involved.
Mike
I'll do some searching - thanks!
Bummer.. I've poked my head around here and haven't seen that registry edit to enable Network on the root directory... you know where it's at off the top of your head?

Can I stop Camera app asking about Storage Card?

I have a storage card in at all times but I actually want photos to be saved to the built-in storage rather than the card. Annoyingly, the Camera application always checks for a card and asks if I want to change the setting. Even though I always tell it I don't want to use the card, it never remembers this.
Can anyone tell me how to fix that?
Cheers!
Si
Izzard-UK said:
I have a storage card in at all times but I actually want photos to be saved to the built-in storage rather than the card. Annoyingly, the Camera application always checks for a card and asks if I want to change the setting. Even though I always tell it I don't want to use the card, it never remembers this.
Can anyone tell me how to fix that?
Cheers!
Si
Click to expand...
Click to collapse
Usually the camera only asks about storage card when you have just inserted a new card OR you have the "network" folder enabled.
Now unfortunately the camera is only capable of saving to one of two locations at any one time so:
If the view network folder is NOT enabled you will be offered:
"Main" or Storage card" and once set it will remember your choice and not ask again.
BUT with Network folder enabled and a storage card inserted you will:
be asked if you want to use "StorageCard" every time you start Camera, but in camera tools you will only be offered "Main" or "Network" even if you chose the card. It will not set to storage card even if you said you wanted this when camera started.
So, if you want to use main memory with a storage card inserted and don't want the silly question about using storage card each time, then you must disable the network folder. (Use e.g. Resco or Total Commander to do this - forget now if regular File Explorer does it)
Equally if you want to save to storage card you will also need "network" folder disabled otherwise it will save to Main memory even when you say yes to Storage Card on start up of application.
The default setting for the Network folder is disabled, so if you are having problems it is likely to have been enabled by using the likes of Resco or Total Commander.
For those that like the underlying detail:
Specifying your own location in registry=
HKLM - Software - HTC - Camera - Image - SaveFolder - xyz
where xyz is your folder name, but note this folder will be added as a subfolder of the following (in this case storage card) auto added path: /Storage Card/My Documents
Note that setting a location or name other than the defaults will result in problems viewing pictures via the application, though they can be viewed by locating and opening files individually.
[HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image]
value of "Saveto" = 0 will save images to main memory
value of "Saveto" = 1 will save images to storage card
Mike
Mine asked about 4 times and then quit. I thought it was odd but all is good now.
Baxter said:
Mine asked about 4 times and then quit. I thought it was odd but all is good now.
Click to expand...
Click to collapse
Yep, that happens. Though if it just does it a few times it's more likely due to, to put it crudely, it being temperamental about recognising the SD card and storing the registry key number successfully. If it persists then it's more likely due to the network folder issue.
Mike
Thanks for the information. Here's what I've tried so far, based on it:
Installed Total Commander. Couldn't find an option to display the Network Folder.
Installed Rescoe Explorer. Enabled the Network Folder and did a soft-reset.
Before, with Network Folder disabled, the Camera preferences showed "Main Memory" or "Storage Card" as the only two options.
Now, with Network Folder enabled, the Camera options shows "Main Memory" or "Network" as the only two options.
However, the problem has not gone away. It still 'detects' the Storage Card every time I start Camera and asks if I want to use it instead of main memory. I'm using the latest HTC ROM (1.35.255.2 11/14/06).
I also installed PHM RegEdit to check the values you mentioned.
Under [HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image] I have a key called "SaveFolder_0409" rather than "SaveFolder", but this has the correct value of "My Pictures".
The other key, "Save To", has the correct value of 0 for "Main Memory".
Any other ideas? (Thanks for the help so far.)
Izzard-UK said:
Thanks for the information. Here's what I've tried so far, based on it:
Installed Total Commander. Couldn't find an option to display the Network Folder.
Installed Rescoe Explorer. Enabled the Network Folder and did a soft-reset.
Before, with Network Folder disabled, the Camera preferences showed "Main Memory" or "Storage Card" as the only two options.
Now, with Network Folder enabled, the Camera options shows "Main Memory" or "Network" as the only two options.
However, the problem has not gone away. It still 'detects' the Storage Card every time I start Camera and asks if I want to use it instead of main memory. I'm using the latest HTC ROM (1.35.255.2 11/14/06).
I also installed PHM RegEdit to check the values you mentioned.
Under [HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image] I have a key called "SaveFolder_0409" rather than "SaveFolder", but this has the correct value of "My Pictures".
The other key, "Save To", has the correct value of 0 for "Main Memory".
Any other ideas? (Thanks for the help so far.)
Click to expand...
Click to collapse
Mmmm Pesky thing because in theory if it recognises the card it should not ask each time. I had assumed you had network folder enabled already because with that enabled it definitely will ask about storage card every time. So I would reset to disable network folder. In this mode it should ask about storage card on the first occasion only and once you have chosen ot should not ask again. But as a poster above found this took four goes before it settled down.
So I can only suggest that the act of disabling the network folder again might settle it down and it will only ask you once about storage card.
I;m afraid though this type of problem is rather common and folks just find one day it's fine next day it isn't - in your case I hope the changing of settings to on and off again for network folder may reset things, can't say I'm holding my breath though.
Mike
Heheh - nope, it didn't make any difference. Maybe it's just in the design of this ROM to persistently try and persuade me that I really want to save to the Storage Card. After all, who would want to save to Main Memory when they have a Storage Card inserted? (Answer: me.)
Izzard-UK said:
Heheh - nope, it didn't make any difference. Maybe it's just in the design of this ROM to persistently try and persuade me that I really want to save to the Storage Card. After all, who would want to save to Main Memory when they have a Storage Card inserted? (Answer: me.)
Click to expand...
Click to collapse
So not only do we have a nanny state but a nanny ROM as well! Saint Tony's bound to be behind it somewhere.
Mike
I'm having the same problem? any way to fix it?
I'm having the same problem? any way to fix it?
EDIT: I install Resco Explorer but I have no idea where the network folder is or what to do.
Bump! Bump!

hermes storage problem

hi there guys
got an hermes 300 here... this is the problem:
when i got it i didnt had the storage card, the microSD card i got few days ago, a 2Gb Kingston... the card is well functioning and no problems...
before the card, everything was saved to main memory of ppc, aswell as MMS, camera pictures etc etc etc... now when i have storage card its same, dunno why? in camera settings i can switch only between main memory and network, no storage card shown... MMS is same, every copy is saved to main memory and it fulls it... nothing is saved to storage card... how to automatically switch all storage to storage card?
thx guys
Well where the apps store things is not automatic. In other words you need to go into an applications settings OR make changes to the Registry to set for example saving SMS or IE temp files from main to storage card.
Now the exact changes you need to make are already posted in this forum so searches should produce results. (if there is a particular setting you cannot find then ask again in this thread)
Now, a slightly different issue is where the camera stores photos:
Uunfortunately the camera is only capable of saving to one of two locations at any one time so:
If the view network folder is NOT enabled you will be offered:
"Main" or Storage card" and once set it will remember your choice and not ask again.
BUT with Network folder enabled and a storage card inserted you will:
be asked if you want to use "StorageCard" every time you start Camera, but in camera tools you will only be offered "Main" or "Network" even if you chose the card. It will not set to storage card even if you said you wanted this when camera started.
So, if you want to use main memory with a storage card inserted and don't want the silly question about using storage card each time, then you must disable the network folder. (Use Resco or Total Commander to do this - forget now if regular File Explorer does it)
Equally if you want to save to storage card you will also need "network" folder disabled otherwise it will save to Main memory even when you say yes to Storage Card on start up of the camera application.
The default setting for the Network folder is disabled, so if you are having problems it is likely to have been enabled by using the likes of Resco or Total Commander.
Cheers
Mike

Categories

Resources