My qwerty keyboard has gone crazy!!
it worked 100% fine yesterday, now all the sudden the "M" key is acting like its stuck down, so when i go to text message someone the instant i press "new message" it starts doing mmmmmmmmmmmmmmmmmmmmmmmmm until i press a key that works...its like the right half of my keyboard quit working for some weird reason...
things i've tried
Soft reset - didn't fix
take battery out - didn't fix
hard reset - didn't fix
any suggestions would be very nice thanks
anyone?....
HTCMDA said:
My qwerty keyboard has gone crazy!!
it worked 100% fine yesterday, now all the sudden the "M" key is acting like its stuck down, so when i go to text message someone the instant i press "new message" it starts doing mmmmmmmmmmmmmmmmmmmmmmmmm until i press a key that works...its like the right half of my keyboard quit working for some weird reason...
things i've tried
Soft reset - didn't fix
take battery out - didn't fix
hard reset - didn't fix
any suggestions would be very nice thanks
Click to expand...
Click to collapse
It sounds like the key is sticking down. Hopefully just pressing it repeatedly will get it working again. Otherwise it's a new keyboard or the dismantling of the keyboard I discuss in another thread. Don't automatically assume it's the M key that is sticking though it might be another key or couple of keys that are sticking.
See also:
http://forum.xda-developers.com/showthread.php?p=2039926
Mike
Related
For a while now I've had problems where all the hardware buttons on my 8125 do not function properly. Specifically, the IE button doesn't start the browser, the messaging button doesn't start the messaging app, the phone buttons don't start the phone app, etc...
The camera button occasionally works to start the camera program but stops working after that first press. All the other buttons, including the slideout keyboard do not work at all, with the exception of the volume button, as noted below.
Another symptom is that the volume button, if I forget it's broken and push it by accident, will cause the volume app to popup and try to adjust itself up or down repeatedly. It's obviously thinking the button is stuck.
I know this has got to be a software problems since they all failed at the same time. Does anyone have any idea what might cause this problem and how I might go about troubleshooting it?
I have done a hard reset twice to no avail. The phone was literally 30 days out of warranty when I first reported it to Cingular/AT&T and they wouldn't cover it.
Re: Hardware buttons
Bump. Anyone got any ideas? I can't be the only person that's had this happen.
I just finished flashing the ROM so I went from 1.08 to 2.25 and still no joy.
Earl
so ive had this problem before and i miraculously fixed it some how,
so ive done a little googling and seen that im not the only one with this problem, while the phones in portrait, returning from standby the down button seems to be pressed as it scrolls through the today screen insanely, but as soon as i press the up button it stops the scrolling. although the down button it self on the front doesnt work.
now in landscape mode with the keyboard, what would be the down button in portrait is scrolling to the left continuously until i press what would be the up button in portrait but is the right key on the directional pad.
i guess this is a important key factor here...the up, down, left, right arrows are working just fine on the keyboard
its not so annoying that i have to press the up button once to stop the scrolling, i mean i can live without the down button for now til i get a different phone, but as soon as i hit the power button to put the phone into stand by this "scrolling" restarts, so as soon as i hit the power button phone starts scrolling, and it takes, many many attempts for the phone to go into stand by due to this annoying glitch, im not sure if its a registry problem as to i cant find the down button in the registry
i cant seem to fix it like i have previously, i fixed it twice previously, some how.....
if anyone has solved the problem to the wing scrolling down problem, help me out here...
hi,
some of the hardware keys stopped working on my htc diamond...the only keys that work are. the power button, voluime buttons, up pad down pad and the center/ok button....everything else does not work, even the touch pad doesnt work...can any one please help me, OH and the buttons somtimes work for example when i somtimes press any button on the left side it will go to the home screen, for example when i press call button it will go to the home screen, same with the right side if i press the back button it will press the call end buton wierd eh? So basicly the buttons do respon (the litghts turn on when i press any hard ware button but they do not do anythin 99% of the time and if they do it is the wron function HELP GUYS!
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
longice said:
Have you tried restarting the phone? Press and hold the powerbutten (if it works), and answer Yes to the question about shutting down. Take out your battery for 10 seconds, put it back in and fire up your phone... It might help
Click to expand...
Click to collapse
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
jsmith_00 said:
I have the same problem but it is only the home and answer buttons that stop working. If i do the restart it wirks but why should i keep having to do this
Click to expand...
Click to collapse
Hehe, can't answer that. I've had the problem only like twice in three months, so for me it's not a problem... I guess it's a software problem. Remember, it's not a Nokia The inside so much more complicated, so I guess we just have to live with some bugs...
Are you guys sure that this is a hardware related problem? I have the same prob and i was quite sure that i f**ked up the capacitative panel by playing kevtris manickly for quite a long time.
The capacitative screen is comprised by two parts folded.
I have opened the diamond and i found out that there is a lietle piece of metal that binds them together. This was bent(from kevtris probably) so istraightened it out with my bear hands. But it did not fix the problem. Do not try it anyway. Too messy if you have two left hands like me.
Have you ever seen a calibrator for the capacitative screen?
had the same problem only the power button would work , hard reset fixed it.
Have u installed S2U2..try uninstalling it...or install latest version 1.68 of S2U2
I think i broke my phone. I installed some keyboard layout .cab and i soft reset. Now it cant go past the screen where you see the IPL/SPL info and other numbers, and after time when it dims you can only see it in strong light. My PC doesnt recognize it anymore when i plug it in. Please, help much appreciated.
edit (heart attack over): for those who are having the same problem heres what worked for me: make sure the phone is shut off, then hold communications and voice buttons and while you hold them press powerup button for a sec. Keep holding those 2 buttons untill a messege appears, then press the Answer key
I can not describe how much you helped me, thank you very much!
Thanks!
Yes, thanks - i did the exact same thing ... installed a "New WM Keyboard CAB" and it never went beyond the IPL/SPL slash screen. I was worried for a bit!
Thanks again!
since yesterday, i have this nasty problem with my touchscreen. when i press the power button to wake the phone, or to get into the power-menu, the touchscreen stops working. this does no happen if i press any other button.
sometimes, i can use the phone again if i wait until the screen turns off and then wake it up by pressing any other button, but most of the time i need to pull out the battery and restart the phone. even when i pull out the battery, the screen won't work sometimes, and i have to restart the phone again.
when i first experienced this problem, i was using the nexushd2 v2.0 rom, i then updated to the v2.1, which didn't help. i tried reinstalling the rom, wiping the /data/ , the cache and the dalvik cache (multiple times) and eventually changed to the typhoon cm7 rom (with repartitioning and reinstalling the magldr), the problem is still there.
the phone did never get wet, fall down, or anything the like. pulling out the sd card makes no difference.
i hope someone can help me there
May be it´s a hardware problem, some HD2 have it.
You can test it, if you go back to windows.
its the good old digitizer its right under the power button press the end button hard and it should work again but if you press it again it will corrupt use softkey or remap your hardware buttons
http://forum.xda-developers.com/search.php?searchid=22866591
Kameirus said:
http://forum.xda-developers.com/search.php?searchid=22866591
Click to expand...
Click to collapse
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Nigeldg said:
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Click to expand...
Click to collapse
lol
i have the same problem with the endkey but with the rom in my sig
it actually has a softkey button that can be setup with a power softkey ..longpress on the softkey and it pulls up the power menu
just like it would do if you used the hardware power button
Yeah I thought there were softkey power buttons but I wasn't sure and I'm on my phone so couldn't be arsed to search
Sent from my HTC HD2 using XDA
Kameirus said:
link that doesn't work anymore
Click to expand...
Click to collapse
Nigeldg said:
many words
Click to expand...
Click to collapse
well, sorry dunno why i didn't search the forum before
pressing the power button hard worked , but i think i'll keep using soft buttons and wake the device pressing any other button (i don't think the brute force method is a good idea as i want to keep my phone some time longer )
Touch Screen Problem in HTC HD2
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
nrvjain said:
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
Click to expand...
Click to collapse
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Exactly, the same issue started to happen yesterday!!!
mwuahjaan said:
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Click to expand...
Click to collapse
I tried changing the metal strip too. But it still the same. Doesn't work.
Sent from my GT-N7100 using Tapatalk 2