Related
Hi to all,
I have a very strange problem with the connection with activesync.
When i got the Qtek 2020, i was able to syncronise on the USB cradle easily.
After some time i decided to connect via bluetooth.
No problems there!
Activesync is working excellent via bluetooth!
But..
Now i cannot connect via USB !!!!!
I tried a fresh install on another PC of activesync (even the new version from MS), but nothing! The activesync icon is always grey! it cannot connect.
Windows find the USB cradle and the PPC OK, but nothing more.
The cradle and the PPC port must be working because i see that the battery is charging when i have it cradled.
In the PPC settings options--options i have the USB selected.
Any ideas??
TIA
try running
\windows\repllig.exe
and then put the device in the cradle
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
Thank you for your answer,
u mean the repllog.exe file?
I will try that ok!
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
I run repllog.exe couple of times on the cradle and it Worked !!!!!!!!!!!
Thank you very much!!!
lads
i have had a similar problem and was pointed towards this topic.im excited that i will be able to use all the functions fo the phone again.
i just dont know how to run this exe.where is it and how do i run it and what happens when i run it
cheers in advance
zag
still looking for help set this up,
how do i run it please
rob
this forum is fairly disappointing , i was told advise was easy to get.
is there any one who will help me sync my xda please
rob
If you look at Rudegears reply you will see that the file is in the windows directory.
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
I had a similar problem. the answer:
Re-install activesync 4 WITHOUT the cradle or usb cable attached to the computer. plug it all in after the installation.
hope that helps.
Darrell said:
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
Click to expand...
Click to collapse
I also have this kind of problem ... anyone can help ??? I want to install activesync 3.8 since I encountered internet pass through problem. TIA.
cruisin-thru said:
If you look at Rudegears reply you will see that the file is in the windows directory.
Click to expand...
Click to collapse
It's not in my Windows folder!
I'm running Windows XP SP2
Activesync 3.8 is very slow... It actually stops responding whenever I dock my device - then starts working after a few minutes!
I thought this might fix my problem, but I can't find the executable anywhere!!!
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
NiklasM said:
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
Click to expand...
Click to collapse
Everything all right
Are u using the same version of Active sync that came bundled with your device?
If yes TRY THE UPDATED VERSION
If NO, Try the PREVIOUS VERSION.
maybe there is something wrong in one of the connecting Pins In the cradle/Socket of the cable
How do I update software in the device, when I cannot sync?
Ive tried different software in my PC. None worked.
Im not sure its a HW-failure in the cable, since I tried different ones..
It could be in the device, Im not sure how to check though.
/n
What version of ActiveSync has worked for you up until now?
Try an older version of AS:
3.8: http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
Oh I solved it....by making a hard reset - SURPRICE!
What a crap device this is...
That almost always does the trick....sometimes my MDA II will act really weird and a soft or even a hard reset will fix a seemingly incompatible app.
I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks
Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.
zuza said:
Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.
Click to expand...
Click to collapse
I have made all that, but still nothing happens.
RRibeiro said:
I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks
Click to expand...
Click to collapse
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?
apd said:
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?
Click to expand...
Click to collapse
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.
RRibeiro said:
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.
Click to expand...
Click to collapse
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.
apd said:
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.
Click to expand...
Click to collapse
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.
RRibeiro said:
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.
Click to expand...
Click to collapse
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.
apd said:
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.
Click to expand...
Click to collapse
Is there any way to clean WMDC completly from my system?
I try'd uninstall, but it seams that some leftovers stay behind.
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
I am not able to use active sync after doing a WM6 upgrade (I used WM5 before)...
I tried all ROMs available - but ActiveSync doesnt work.
Funny part is - when in cradle I am able to do upgrade, but active sync doesnt work.
Any views / clues
You need the latest version of ActiveSync if you're running WM6.
Yes, I am using the LATEST active sync software in my PC !!!
tried to use bluetooth rather then usb to see if that works?
tried downgrade to WM5, then upgrade to another version of WM6.
Guess what....
I uninstalled Activesync and then reinstalled the same version again...
NOW it works... Nothing more - it works now...
Hope it works for others too
Actually there is no need to reinstall Active Sync, the best way is to delete the device from the activ sync with no device on cradle and then place the devie on cradle.
April 1 said:
Actually there is no need to reinstall Active Sync, the best way is to delete the device from the activ sync with no device on cradle and then place the devie on cradle.
Click to expand...
Click to collapse
I tried this first - but with negative results...
Uninstall & re-install was just a try - and it worked
Uninstall and install
How did you uninstall and reinstall ActiveSync on Windows Mobile? Is there a separate cab available,and if so, where?
WMNovice said:
How did you uninstall and reinstall ActiveSync on Windows Mobile? Is there a separate cab available,and if so, where?
Click to expand...
Click to collapse
He is talking about uninstalling on PC, not on mobile.
April 1 said:
He is talking about uninstalling on PC, not on mobile.
Click to expand...
Click to collapse
Thanks right... Uninstall the ActiveSync and re-install it. Dont forget to restart your PC... and try to SYNC - it could work then
Restarting WMDC
Another option, less painful than uninstalling, is killing the wmdc.exe process in Task Manager and restarting the Windows Mobile Device Center. Works very often.