random reset on wing after rom update - Wing, P4350 General

hi, im new to the forums here, had a question for you guys, i was updated my rom the touchit wing edition lite and while i was in the update process i got a message on my phone saying no text file found? And nothing was happening on my comp so i had to remove the usb. My prob now is that it boots up fine to the new touch it rom but randomly resets on me i think i installed like a quarter of the rom because i can do some stuff but not other things and the phone just resets on me when i try and flash a different rom even the stock t-mobile one. Any help on this would be great thanks

what rom and what method were you trying to flash?
It sounds to me like u were flashing touch it 2.3 or something which is extremely outdated using an extremely outdated flashing method.
I suggest looking into flashing using HARDSPL or USPL

Related

Need help to unbrick.

Hi im sorry i had to post this as its probably been asked over and over but ive searched forum and cant seem to find a working solution for me.
I updated my HTC Touch ELF with Onyx ROM after updating SPL etc and everything went fine but couldnt get a signal etc on phone so decided to go back to old rom that i made a backup of untill i had done more research and found the ROM i wanted.
Reflashed the backup rom build i made everything looked good untill i went to boot and it just powered off after the orange brand logo.
I cant do the goldcard method as i have no other phone that can take the card i do however have a adapter for my pc for the card.
Ive treid the ubrick thread but cant get mtty.exe to use usb port.
Can somebody help me out to get this up and going again, Sorry for posting this i know its probably been asked many times but cant seem to get it going and am a n00b on this subject really.
thnx.
[EDIT]
Just managed to get that unbricking rom installed and booted so am gunna try and flash my original dump again.
[EDIE2]
Seems it some problem with my original backup as just doesnt boot after brand logo, When building with HTC Rom tool other files are green but OS file stays black does that mean the OS file is bad?
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
crapula512 said:
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
Click to expand...
Click to collapse
yeah thnx that did the job
Cant seem to get my original dump back on though
I originally just wanted to update to windows 6.1 but there isnt a official update can you recommend the best/most stable unofficial one to use?
take a look at onyx, tess, touch hd or aether. and if u feel brave, u can try letama which is WM 6.5 beta
tried the onyx and another but cant find network just keeps "searching..."
what radio do u have? try with 3.34 or 3.39
Thnx, Just noticed the updates and are going to update and retry.
thnx for help, appreciate it
Do they have them updates for the ELF, can only find those versions for ELFIN.
[EDIT] nm Noticed they are for either
Still having trouble with signal always searching, Installed latest radio version aswell.
[EDIT] whoops what a dumbass, I missed the pin entry at beginning which sometimes pops up but then boots into today screen if not enetered in time, finds signal straight away now

Can't flash my HTC TD2

Hello XDA-ers.
I've flashed my phone with the new ROM from the htc website.
And today i wanted to put Dutty's ROM on it, but it wouldnt flash.. the update would get stuck on 0% and then nothing happens for 20 minutes..
I also tried the udK_Lea_R5_MW6.5_WWE rom but the same thing happened.
Is there something wrong with my phone?
Thanks in advance
You need to use Hard-SPL.
READ THIS and follow instructions!
http://forum.xda-developers.com/showthread.php?t=520312
Simple things first:
Have you run HardSPL? (Latest version is required, 1.83 at time of writing).
Have you tried loading into Bootloader manually before attempting to flash? (Hold VolDown when powering on).
If those fail, try and identify what has changed since you flashed the original ROM.
Aaah didnt knew i needed HardSPL..
First time i flashed my ROM it immidiatly worked =p
Thought that ROM screwed my phone in ever being flashed again .
Just needed the HardSPL ^^
Working smooth now, thanks !

Leo HG V.08 rom flash causing HD2 reboot issue

Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
did you try MTTY drivers?
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Remove the battery and replace it
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Sounds like a bad flash - I have used Dutty´s HG 0.8 without any troubles.
Did you try to go into the bootloader (turn off device, vol. down + power on at the same time) on the phone, to connect it only then to the PC through USB/active sync?
How to Fix
I had same problem with this ROM. I put my phone in boot loader (volume down + soft reset) and flashed a different rom. All now ok.
Hope this helps
Guys, I think the title of this thread is misleading, flashing incorrectly any ROM would give you that result, any error from downloading to flashing can get your device in a temporary and reversible trouble, just put your device in bootloader mode and flash it again, with another ROM, you can try v 0.8 again but i would recommend you to download it again.... anyways... you do have HSPL right?
You have bad radio ROM version, use recommended Radio for Dutty´s ROM
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Hi,
I think personaly that when peoples are taking time to help you, the minimum respect is to answer to the questions and give us the result of our comments!
WE (the forum) are helping you! Handling like you do will not encourage others to help you!
Have a good day!
I think this is Radio related. I have had numerous people have the same problem upgrading from older 1.48, 1.66 etc with stock radio and the get this same problem. Almost 95 % of these have been corrected by flashing the TMOUS Radio 2.08.50.08.02 Radio. Then flashing the ROM again. I started a new Thread asking for input from others and when this is confirmed 100% then I will change the title of the Thread to Warning.
Resolved
Thanks to all the reply's with advice to my post. My HD2 is now back up and running.
Basically after leaving the device on charge for 2 hours I then tried another re-flash from my pc which worked first time.
At the time of the initial flash the battery was show 86% so it's odd how charging the battery could resolve the problem - I'd previously tried 5 other ROM's over a 3 week period with no problems but this is my first v.08!!
I choose a Dutty ROM as I'd read a number of good posts about his work and I must say this ROM seems fast and stable so it difficult to put a finger on a cause - Either way I'm happy - cheers.
and don't forget to change the topic title!
htc12345 said:
and don't forget to change the topic title!
Click to expand...
Click to collapse
I'll second that notion. We certainly don't want to mislead anyone about the excellent quality of Dutty's ROMs.

got hardspl now i'm stuck

a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped

[Q] Task 29 problem

I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You
Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...
Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.
Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Thanks will do it and keep yu updated with it..
simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..
Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??
FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...
I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner

Categories

Resources