Related
Hello my friends my question is that i would like to clean vista with registry cleaners but i was doing it once and then was lost the resolution button the com manager button and etc.... can someone provide me with some executable that after cleaning i can put thaT REGISTRY BACK ?????? Please help me if you can.......​
Reboot your HTC Shift
on boot Fn+3 and boot a Recovery Function and Restor A Vista in default style
Hi,
before you do that have a look here:
\program files\htc\control\setup.exe
And I think here you also find the Intel driver to setup the resolution button.
S.
do not touch registry cleaners
yep, as i've told. registry cleaners (all of them) will mess up with the resolution changer and controll center.
Reinstalling the ""\program files\htc\control\setup.exe"" woun't help at all.
The only way will be fn+3
cmonex said:
do not touch registry cleaners
Click to expand...
Click to collapse
Thank cmonex but i should clean vista so it will run good how i will clean???? do you know any safe tool??? after a year of using it will stuck vista without cleaning..................
dimisxxx said:
Thank cmonex but i should clean vista so it will run good how i will clean???? do you know any safe tool??? after a year of using it will stuck vista without cleaning..................
Click to expand...
Click to collapse
to be honest I dont know about vista yet
been running XP on a PC for 3+ years now without a reinstall or registry cleaner, no problems - have just bought new PC, but before that I used that PC every day for long hours.
you just don't need to put junk on it in the first place. then there is nothing to clean.
I am using TuneUp Utilities 2008 and didn't ever had a problem. I have run it on shift also a couple times and everything still working OK.
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
hotdevotchka said:
Hello everybody
I have a HTC Shift on which Win XP was recently installed . The problem is that it doesn't see the Snapvue part - I can't open it and can't acccess the Comm manager either. In Snapvue I just get a white screen, with the HTC logo - and the comm manager button (upper right) doesn't do anything when pressed.
The guy who installed the Win XP said something about using Active sync to enable communication between the 2 processors (?!) - The device has Active Sync installed, but it just tells me it can't synchronize.
I am a girl, as you probably noticed, and know very little about computers and stuff....Could someone save me? I ned a step-by-step guide for solving this problem, but written for DUMMIES (such as me
I also understand I could reset the device to the original Vista - but have no idea how to do it?!
Please help - I've been looking at my Shift for 3 whole days, and am getting al depressed..
Thanks in advance!
Click to expand...
Click to collapse
Did you turn off the device completely? I would remove it from the power, remove the battery, and give a 10 to 20 secs and put battery back and boot it.
Let me know if you have issues.
To restore it to Vista, if the recovery partition is not swiped, just press Fn+3 at the boot time and once it goes into recovery, and just follow the steps.
didn't work....
I tried removing the battery, nothing happened
When I press Fn + 3, it just goes on and starts Windows XP normally (the xp "half" works allright - it's the comm and snapvue which are dead )
Any other idea? Is there any hope ?
oww, now it's really nasty!
I insisted on pressing the FN+3 , and after one or two questions (if I wanted to continue etc) it said "invalid data on recovery partition" - and now the screen just shows black and there's no winxp anymore - I suppose I should write some commands, as there's a white line blinking....but I don't know how to do it.....Heeeelp!
If XP has been installed in place of Vista, then the recovery partition has been wiped, so FN + 3 will not work for recovering Vista.
The Vista (or XP) side and the snapvue side are two totally different entities, so you can wipe the hard drive and snapvue will still work, as it lives in ROM.
So you have 2 separate problems, you need to re-install an OS, and you need to find out why snapvue is not booting.
I managed to enter the bios ( pressed DEL) and it says that hard drive Toshiba etc is "disabled" - so no wonder it can't boot...
Could I do something to enable it or whatever?
Or should I give up ?
Hi,
Who installed XP for you?
Since you need to now 1 or 2 things about computers to do so, I think that person is the one who can help you and do it the quickest....
Other wise you need to post a message after every step and then wait for one of us to respond.... that would take days if not weeks....
Given your name, I guess you don't live near Enschede, the netherlands do you?
Otherwise You could come by and I could give it a go....
greetz,
Pfeffa-rah
no, I live in France at the moment! But thanks for the offer anyway!
I guess I'll just take the thing to a repair shop or something
As for my name, it's "Clockwork Orange" inspired - I'm a great fan of the movie, although I'm French.
No comments regarding the guy who installed the XP! We must keep this discussion civilised!
Thanks a lot , everybody!
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Abu Shahad said:
Dear All
I'm not able to install any software in Shift in windows mobile , i tried many softwares but i couldn't install whenever i try i get the following message
THE FILE ...CANOT BE OPNED. EITHER NOT SIGNED WITH TRUSTED CERTIFICATE, OR ONE OF IT'S COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PRESISTS TRY REINSTALLING OR RESTORING THE FILE
i did hard rest but still
any one have a soulotion for the same
Regards
Click to expand...
Click to collapse
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
saiweb said:
Which ROM you are using? Could you please give us your ROM version etc. info?
Thanks
Ram
Click to expand...
Click to collapse
i'm using the original rom i haven't changed it
deadnex said:
Have you tried using a registry editor and changing the following line?
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
Click to expand...
Click to collapse
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Abu Shahad said:
thank you
but how to access the rigistry, as i mentioned i'm not able to install any software
regards
Click to expand...
Click to collapse
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
deadnex said:
First of all, make sure SnapVue is connected to Vista through USBtool and that Windows Mobile Device Center is connected.
On Vista side - download and install CERegEditor. Open it - navigate to the "tools" menu and select "unlock registry". You are now able to edit your WM registry from the Vista side. If you get any warnings on WM side just press "Yes".
Hope this is helpful.
However, if you didn't follow a guide on how to unlock your shift to full WM I would recommend that you read one of the following threads:
Full Instructions for getting WM6, RealVGA, Office and IE
Enabling full WM the REALLY EASY SHIFTpack way
Click to expand...
Click to collapse
thanks man worked perfectly
when i press modify it tells me thats theres an error and it closes
please help
How to "attach" USB Tool and activate "Internet Sharing" automatically at startup ?
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
joker197cinque said:
I "liberated" my XP downgraded HTC Shift and succesfully tested 3G connectivity.
The problem is that every time I restart the device, I have to:
1) enter WM
2) Attach device via USB Tool
3) Enable Internet sharing
As WM is an operating system, I guess how to do this automatically. Can I write a "bat" file to do these steps or do you have any advice to achieve this ?
Any help MUCh appreciated.
Regards.
Click to expand...
Click to collapse
go to wm -win start menu --settings--connection--ub to pc--enable advance network connectivity.
this should fix the problem, cheers
Unfortunately, it does not solve the problem.
I noticed that the only thing I have to do is to activate Internet Sharing.
How to do this at startup, automatically ? Has WinMo some autoexec file or startup folder ?
Thanks.
Up, please. I'm so near to surf only starting up my shift
Up. Up. Up. Up.
Yes I'm sure you can do all of that with Mort Script,
Good luck!
And don't forget to post your final results so other users would enjoy of that!
unapproachable2kx,
can you support me ?
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
wovens said:
Maybe you can just drop the shortcut for the application on the startup folder or maybe DotFred's TaskManager can help(http://www.dotfred.net/TaskMgr.htm).
Click to expand...
Click to collapse
WinMo has a startup folder (\windows\startup\) that you can create a shortcut for "Internet Sharing" inside, the problem is that you need a parameter with the shortcut to run the "Activate" conmmand in "Internet Sharing"; 'cause a normal shortcut will just run the app, then you'll have to press Activate manually (we want to automate that too); same thing for "USBTool". Unfortunaltely, I don't know the set of parameters for the shortcuts.
Or try looking for some advanced shortcut creation tools for WinMo, like in this list
http://en.handybyte.com/search/shortcut-mode/
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
you need to install it
Chanaka said:
I recently brought HTC Shift X9500 mobile computer. I have a problem with SnapVUE application. Once I press SnapVUE button it goes to windows mobile however it not display SnapVUE window. It just only display windows mobile task bar and start menu.
I think SnapVUE application is not installed WM side is it possible to install SnapVUE application on WM?
Click to expand...
Click to collapse
its available as a cab file
Make sure it is enabled.
Start->Settings->Today->Items
adamo86 said:
its available as a cab file
Click to expand...
Click to collapse
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Not available on today items
JaWe said:
Make sure it is enabled.
Start->Settings->Today->Items
Click to expand...
Click to collapse
It is not available on today items
Items available on today items are
Date, Windows Live and Windows Live Search
i have it as a cab file
Chanaka said:
Could you please send me the the cab file location? I have searched windows mobile file system but it is not available. Is it possible to download? Do you have download link?
Click to expand...
Click to collapse
i have the file on my shift i will need your email add i send it to u
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
could you send me it to [email protected]?
Many Thanks
Snapvue black screen
Hi, I am newcommer in Htc x9000, and I do hard reset to unlocked it, but now my snapvue become dark/black screen.
Any body can help me?
Thanks.
Follow this link, it helped me
http://www.pocketables.net/2008/05/how-to-hard-res.html
Dead snapvue, need help
Thanks for your inform, but I already did hard reset (ecshift -bl, mtty_0513_test and task 28), but the snapvue screen still blank/dead.
Any another way?
Thanks
hi there, adamo86.. can you please send me too the cab file for the htc shift i do have the same problem..here's my email: MOD EDIT: REMOVED EMAIL thank you very much..
please help
adamo86 said:
i have the file on my shift i will need your email add i send it to u
Click to expand...
Click to collapse
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
sancharhari said:
can you please send me the cab file or link my htc shift have black colour on snapvue side
please help
Click to expand...
Click to collapse
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
help me
adamo86 said:
Which file is it that you want I have to check if I still have it.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
hi thanks for your reply,
I am having htc shift clio200 (x9000) cdma whatever is the model. I was trying to program it for my cdma network. I done almost everything and program it. I didn't find the hard spl for cdma device and rom for cdma shift. after some research I find somewhere that if I will make clear storage then I can get flash any shift rom which is not having radio image. so I clear the storage.
after that snapvue side gose black
I have done the process below
by doing f3 hardreset my shift installed fresh windows vista
shiftec.exe -bl
then task 28 with mtty
all sucsuss but still nothing
its still black. I can still go to bootloader mode
please help me how can I get my snapvue works
please help
I'm not sure how you get snapvue back. However I have these two files
The first file is to liberate shift
The second is the shift*pack
Sent from my C6903 using Tapatalk
Did you go to ShagCtrlCenter and try to reset SnapVue in advanced settings?
If you haven't already liberated your Shift i don't know how to reflash WiMo Side.
If you can set it to bootloader mode it would be worth trying to do so.
Did you also hardspl and all this stuff?
Files can be found here:
http://forum.xda-developers.com/showthread.php?t=1928501
(If this answer in any way may have been useful to you, don't hesitate to press "Thanks"button )