Hi there,
My phone has recently started to cause problems, it gets stuck at the boot screen for WM Black Dymond, then won't go any further.
I have tried to update to Hard-SPL V7, then flash my ROM to the newer WM Black Satin, but ActiveSync won't even detect my device in the boot loader, even though it knows theres USB connectivity, ActiveSync just won't detect it.
Also, if i go into my PC's Device Manager, under the "Windows CE USB Devices" i can see "HTC USB Sync"
So i am not sure what is going on and why ActiveSync won't work.
Any ideas?
If this information is of any use, heres whats on my boot loader screen.
HERMS100
IPL-1.01
HERMS100
SPL-1.11
Update-
I have tried to install Black Satin without ActiveSync syncronization, it gets to 1% and then the phone reboots and the utility says image file is corrupted.
download "satin" again. check out wiki for Black roms. should find site from there. Also if you wanna try without computer to upgrade, try sd card. format sd card to fat 32, copy ruuimage.nbh. rename to hermimg.nbh. put in phone. go to bootloader and follow the prompts. I find MUCH SAFER than through usb. Make sure you have more than 50% battery. Should be no probs.. Happy flashing...
Ps satin is an older rom now, you should check out some of the newer ones... Pays, Schapps, TNT and Pandora's to name a few.
Activsync won't recognise your device in bootloader, that's normal. You should still be able to flash via usb though. Check out this guide:
http://forum.xda-developers.com/showthread.php?t=299462
Related
Okay, I'm completely stuck. Did a recent flash of my Tyn to the HTC Qtek 2.11.255. Since I've done this I can't connect to my PC - get the USB Not Recognised. Tried ActiveSync v4.2 and v4.5 and get the same error. Tried it with my Vista PC and get the same error.
So, I thought I'd flash it with a new image to see if it is an image problem.
Created a HERMING.nbh file and moved it to a clean MicroSD card. Went into Bootloader and it flashes "No Image Found".
I'm running IPL-1.04 and SPL-2.10.Olipro
Can someone please help.
---------------------------
Edited.
Fixed it. Turns out after spending hours of editing the registry, uninstalling ActiveSync and re-installing it, it was the damn cable.
Never did sort out the SD flash problem. Hopefully I'll never need it.
Hi,
I tried a new rom and now am stuck at the bootloader with no OS on the phone.
ipl 2.10.0001
spl 2.10.0001
gsm 02.69.21
os 4.0.0.0
I have searched all the forums and still cannot get my spvm600 to do anything. I have tried to run several roms but the problem is they cant see the phone as activesync wont connect. is there a way i can boot from the sdcard or somthing or do i have a expensive paperweight. when i try to hold down the camera and comms keys on start it asks me to format the device and then says doen and goes back to the above screen
anyone?
ideas?
Try to restart your device and deliberatly go to boot loader (keep camera button in) (keep usb disconnected).
once at boot loader screen connect usb cable ... you should now see "usb" in bottom left corner on device screen.
now run a wm5 rom like in step 1 of "how to upgrade from WM5 to WM6" thread - - http://forum.xda-developers.com/showthread.php?t=310452.
it worked for me!
every rom i try to install on it needs activesync to connect to it but activesync douesnt connect to it as the phone has been formatted. there must be a way to fix it but but i am totally stuck
Rom Upgrade doesnt need Active Sync, you just need to be in bootloader and have the usb cable connected. Then just go through the update utility.
I try that and it still seems to say no device connected would you like to try copying again. I cant understand it cause it makes that bling noise when i plug it in
Use Update_NOID
You must use the No_ID Updater to upload a ROM from the 3 colour screen. Just run this exe file and you should not have any problems.
Hi,
Please help, I too have the same problem. Installed all the versions but no use. Can any one help me how to downgrade to Original German ROM version for Neo. So that I can return to O2 company... otherwise this become expensive paper weight
thankyouthankyouthankyou
YEEAAAAHHH
my phone is now working.
the no id rom worked a treat.
xtrafletch thanks a million!!
Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?
Use XP. I bet it works OK then...
4.0 Driver installed?
I have a stock Vista Ultimate, stock Device Center 6.1 and a German Orbit 2. It took me a while, but I finally managed it.
I didnt turn anything off, nothing. The only thing I had to change since the O2 ROM doesnt run unsigned stuff: the reg-entry to allow unsigned apps. Thats all.
Remove SD-Card
Connect to Device Center, wait till connection is fully established
Start the supplied RUU from HardSPL package
Follow instructions/click next/next/next...
Check your device, you have to confirm the execution of the loader
When the tri-color screen appears, unplug and replug, it'll upgrade the SPL and takes approx. 2 seconds
If you have no success at all: try to leave the device at the tri-color screen, quit the RUU and run it again, just leaving the device at the tri-color screen.
After a couple tries, I managed it and I'm happily running a stock HTC ROM instead of the O2 one.
Good luck, report back if it worked.
bencassie said:
Im unable to upgrade the rom on my stock htc polaris.
im using vista with the 4.0 driver installed (dl'd from this forum).
I've turned off usb connection in win device center however when i try and install hard spl2 the progress screen sits at 0% and then times out with a 262 error.
does anyone have any ideas that can help me?
Click to expand...
Click to collapse
u must be in normal status i mean just whe u r synching with vista and the ppc should be on and then start the hard spl (u don't need to go in bootloader by yourself) it will go to bootloader automatically and then upgrade will be successfull.
so
connect ppc with wmdc vista and then when connected and start hardspl
tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box
bencassie said:
tried all of this but still no joy.
i think running it on xp would be fine but i dont have an xp box
Click to expand...
Click to collapse
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL
Thanks A Million!!!!
Olipro said:
failing that, go get an (micro)SD card and format it as FAT32
bung the RUU_Signed.nbh inside the rom update onto the SD card and name it POLAIMG.nbh (or to make it flash with no user confirmation, POLADIAG.nbh) slap the SD into your device and reset into SPL
Click to expand...
Click to collapse
Olipro, You saved my life. After trying to flash my own cooked rom, my cruise wouldn't go beyond the splash screen. I used your tip and it worked!!!
THHHHAAAAAANKK YOUU!!!
Carlos
need help!!
my cingular8125 stucked in splash screen. however, it can still goes into bootloader mode.
when it is turned on, it only shows these informations:
ipl 2.26
spl 2.26
gsm 2.xx.x
os??? (no information)
some rom problem occurs i guess..
when i tried to flash it with other rom. i go to bootloader mode. connect usb but it doesn't connect in activesync. so i get an error when i start ruu.exe.
is it possible to flash rom on my wizard without using activesync?
or using sd card?
is there a dumped rom so i can flash rom using sd card?
any solutions??
need any dumped rom for my wizard..
SOLVED MY OWN PROBLEM:
for those having the same problem here's how i solved mine..
some things may not necessarily needed..
but these steps worked for me:
first thing first:
download a mtty.exe, if you got a zip extract it somewhere..
get a working wizard, or if your wizard can still backup your image you can..
since in my splash screen os onformation doesn't show up anymore.. sd rom backup on my wizard stucked in bootloader mode didn't work out for me.
so i get another working wizard running in cracing's wm6.5 you can get os images on any cooked rom you want..
1.) kill task manager first on your phone. if your'e using activesync 4.5 go to connections and untick the checkbox for "allow usb connections"
2.) go to bootloader mode (turn off the phone/remove battery then hold camera while powering on)
3.) connect usb you'll see little indication on your lower left part of your screen "usb"
4.) run mtty.exe
5.) choose //wceusbsh001
6.) then type "r2sd all" then enter
7.) you'll see a loading bar on your in your bootloader screen so you can see its progress..
8.)turn off the phone. enter bootlader mode. will ask you if you want to copy images on your sd.
9.) hold voice dial button(upper right-side corner of your phone ) and writing will begin
10.) when its done poweroff and on normally and your wizard is back to business..
cheers!!!
I've been trying to install ACA CLk update to my HD2 since last night. Task29 will not clear rom. Just reads communication error. I have tried it on 2 win7 pc's along with a win xp pc with same results. Please help.
i am having the same error.
whether i run the ROM update utility or use the HD2 tools from the tri-color boot screen, i always get the same UPDATE ERROR (262, i believe).
i'm using USB2, no cradle or dock, brand new HD2.
any help? i'm stuck in a windows environment!
just to be sure : the communication is ok between the computer and ur phone ? u see USB in bootloader?
yes it is between my windows based pc and my HD2. and i have tried through boot loader, seeing seriel first then connecting and then it says USB. i've tried leaving it attached when i restart sit goes straight to USB. i have tried connecting with activesync/windows mobile and then running the ROMupdateutility.exe
i always get the same error: it stalls out right when the progress bar appears and never gets above 0%. then the error screen shows on my PC and i have to go through the recovery process.
thank you for any and all assistance! and sorry for the typos, im normally use swype.
this might have been the problem.
i did not have HardSPL3 installed.
i have done it, and then MAGLDR installed fine.
i skipped Task29 mostly bc i never ran that on earlier installs.
so try HardSPL to solve it, maybe?
(i'm still pretty new to this, so take my suggestions with a few grains of salt)