Database Users

TouchFlo implementation on Mogul

Given that I believe the hardware as far as the touchscreen itself goes, are there any plans to try and migrate the TouchFlo / TouchFlo II ROM or application layer over so it'll work with the Mogul?
I love the Touch Flo's inteface, but there's no way I would ever give up my full keyboard.

You can find the touchflo application at this post
http://forum.xda-developers.com/showthread.php?t=334965&highlight=pcm+keyboard
Make sure to download a4, this is the most recent release. Also, read the entire first post before installation. I have the HTC 6800 (mogul) from sprint and I successfully installed this software this morning.

I have also installed A4 on my mogul. It is running great! I modified the config file a tiny to give a longer delay and to add SSContact.

Where is my cube?!!!
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???

I didn't try too hard on the cube because I couldn't get the gestures to work. Maybe this is something that will be improved in later versions.

jpshook said:
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
Click to expand...
Click to collapse
Well this Flash version of the Touchflo 3D Cube it seems to work really well so far on my mogul, like I said it's not the real cube but it's really neat just the same.
http://forum.xda-developers.com/showthread.php?t=328010&highlight=ByKa+Cube+Launcher

Yeah, Byka's Flash version is cool, but it uses lots of system resources and just isn't quite the same.
Someone having the black screen issue has to have found a fix by now?

I've tried the BYKA cube but it jsut looks tacky. It works great but I guess I just have a problem with the icons and the background. Slither is working on a cub which looks exaclty like the TOUCHCUBe but it still has a way, although he's working very diligently. I would love to see the original cube, hopefully some cab extracted in combination with the touchfloa4. That would be ideal.

I tried it yesterday and was not impressed. So I installed SPB Pocketplus V.4 which also has "touch" features and works much better to be honest...

this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future

I w as going to try this after midterms, how is it working? Is it pretty awesome? Is it worth it? does it bogg down your system? Are you afraid of installing other apps for fear of it "blacking out"? I'm very interested in the cube but it seems out of reach right now because of the bugs.
wandrerx said:
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
Click to expand...
Click to collapse

it works fine... no real big load on system resources (it was designed for a slower processor actually). No, I'm not really afraid of installing other programs. I was just stating that it's obvious that all those people complaining about black screens have something that conflicts with the cube somehow (or they didn't install according to instructions). Most likely something that runs in the background...

wandrerx, how do you actually get the cube? What application does it get installed with?
Can you send links to the exact apps you are running that are minimum requirements for this to work?

The original detailed instructions (by mikewtw) and files are in: http://forum.xda-developers.com/showthread.php?t=333513
This is really just a summary of instructions and issues since it's getting messy there...
You need all the files from the original instructions:
TouchFlo.zip
AL_xx_Touch.zip
Touch Settings v1.22.CAB
Installation:
Prereq (To be installed first...):
HTC Home Plugin - I used the one from here... http://forum.xda-developers.com/showthread.php?t=319308
HTC Audio Mgr - I got it from the touchflo.zip
HTC Audio Plugin - I got it from the touchflo.zip
Installation Process
1)Install "Touch Flo (Alpha).cab"
2)Install "JT Buttonflo.cab" (This is needed because it causes a script to run at startup which makes it actually work)
3)Install "Touch Settings v1.22.cab"
4)Delete "Mediahubmini.lnk" from "\windows\startup"
5)Unzip all of the files from "AL_xx_Touch.zip" to "\touch" (this step may not be needed but it was mentioned in the original post and I did it anyways)
6)Copy those "AL_xx_Touch.zip" files into "\windows"
7)Now might be a good time for a soft reset
8)Run "Touch Settings" from programs once but do not touch anything just yet... click on save option at the bottom" (this step apparently saves the icons you just installed so they'll appear... I think)
9)Soft reset
Touchflo is now installed you can either:
A) Map it to a button thus making it buttonflo
B) Install Ftouchflo Alpha 4 and use the touch screen to launch and rotate left to right (one way only currently)
If you decide to use Ftouchflo Alpha 4 I've enclosed:
"FTouchfloConfig.txt" - To be copied into "\Program Files\Ftouchflo_a4"...this also makes it compatible with s2u2
"efrostminimize.exe" (by efrost duh!) - To be copied into "\windows"
FTouchflo usage:
Using my config you can bring up the cube by swiping down-to-up (like the real one) or you can do the same going left to right. You can also minimize the cube by swiping up-to-down(via efrostminimize.exe)
Notes:
1)Upon initial run from either being closed or soft reset, try not to swipe it activated too much otherwise it will open twice. Once started swipe all you want. Of course you could just activate touchflo another way first.
2)Installing Touchflo alpha takes away HTC Home contacts
3)This does not seem to be a killable app via "memory"
4)I'm trying to figure out whether I can make some script to make it run smoother
5)Audio Mngr seems to be the only resource killer as it also loads into the cube
5)Yes it only goes one direction, this was a modified touchflo designed to work with buttons. As I said, this is the one we have to use till a cooked rom with the cube comes out.
6)This does not run on initial boot, you've got to either run it from Ftouchflo or "touch flo" in programs
7)If you run "Touch flo" without button mapped or "Ftouchflo"(configured for it) it will stay on the first screen
8)Can also be minimized by using the "red hangup button" (buttonflo-method as opposed to using my config for Ftouchflo)
9)Using HTC Home Plugin Customizer requires a soft-reset because it disables the Home Plugin temporarily
7)Icons not installed correctly is one very big cause of black screen
8)Conflicting programs may also be a reason for black screen as I did this all on a hard reset
Ftouchflo Alpha4
http://forum.xda-developers.com/showthread.php?t=334965

Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...

jbmoneys said:
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
Click to expand...
Click to collapse
thats pretty humorous.

Please Help Me Understand!!
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..

Ncruze said:
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Click to expand...
Click to collapse
dont get the a4 get touchflow v1.3 from the link below.
http://forum.xda-developers.com/showthread.php?t=338143
if you want a cube, I highly recommend slithers cube.
http://forum.xda-developers.com/showthread.php?t=336234
I have been using both of these programs and they work together flawlessly on the Mogul

HTC HOME vs. the Cube
For anyone who has tried both.
I am currently running the HTC Home on mine and it works very well. Power consumption is normal. Good quick response. No complaints overall.
However, I am somewhat intrigued by the Cube and have been contemplating trying it out.
How is the CPU/Power consumption. Responsiveness. Stability? Thanks for your thoughts in advance.
Michael

Stability
I have tried both the Home plugin and the cube. If youuse the home plugin, do a search for the six tab "fixed" kaiser plugin. Fixes some memory leaks and has more functionality. The Cube here is very unstable and not too quick. I had to hard reset to get it to work, and it will not work with some other apps installed. For me, it would not work with SPB Pocket Plus. I would recommend getting the cube Slither has in development. It runs on flash, is quick, and does not seem to have compatibility issues.

Slide function replacing original MS scroll bar?

Is there a hack to replace native WinCE behavior on scrolling down with an iPhone like one?
Yes. I am aware there are lots of frontend applications like iContact etc. enabling iPhone look and feel. It is not what I really want. All the applications is a patchwork. It is heavy on resources, slow and basically disintegrated. Many applications are in development and lack of vital functions.
I am happy with the application set I currently have. It is stable, familiar and a-finger-operated. The only thing I miss is scrolling down like iPhone provides. One has to get stylus to scroll a scroll bar down/up.
Is there an option to replace the MS OS native library responsible for scrolling by a hacked one, which tracks the sliding finger behavior? (I am now with WM5)

if you use any ROM with TouchFlow, you'll propably forget about the scroll bars in most of the applications...
there is another programs, like FTouchFlo, which replicate the behavior of TouchFlow, with some add ons of course... you might want to check as well...
http://forum.xda-developers.com/showthread.php?t=338143
another thing you can do to get rid of the scroll bar (well most of it) is to change it's size to 1 pixel in width... so if you find your self in a situation where you really need the scoll bar, you just get the styus out and drag it on the edge of your screen....
I hope this will help....

duke911 said:
FTouchFlo
Click to expand...
Click to collapse
I've tested FTouchSL2.5. It works with limited success. For example it doesn't support MT Software TodayAgenda. Also the application side launch works bad. The function seems to be heavy on computation power and competes with today or requires a hard push and doesn't work with gentle gestures.
Is there aby option to post-update ROM with TouchFlow? How reliable the TouchFlow is?

kot_as_kot said:
I've tested FTouchSL2.5. It works with limited success. For example it doesn't support MT Software TodayAgenda. Also the application side launch works bad. The function seems to be heavy on computation power and competes with today or requires a hard push and doesn't work with gentle gestures.
Is there aby option to post-update ROM with TouchFlow? How reliable the TouchFlow is?
Click to expand...
Click to collapse
Hi
Did you include some of those programmes to the exclusion list? Cos' some application comes with slide function on its own which may not work well with FTouchSL activated for it.
Also, you can configure the delay time for a gesture to work. If you like to use just a 'gentle' touch / slide to generate a quick response, try to set the delay to smaller value, e.g. 200 ms. etc.
I've no problem using FTouchSL and it's a must have for my phone.

Sian said:
include hose programmes to the exclusion list
set the delay to smaller value
Click to expand...
Click to collapse
smaller delay value did help to be more responsive. down-up slide launch works better now. all others launches don't. It seems the today interfere with the FTtouchSL. It is pity to say, but I didn't managed to exclude it. I couldn't find it as a program.

you can always use Spb PocketPlus 4, which has "smart scrolling" with a number of other features you might like. There is a fee for it though, but like I always say, if theres a will theres a way

You CAN exclude the desktop, you have to add it as a "window exception". Just manually type in either "Start" or "Desktop", I forgot which one

Azimuth21 said:
exclude the desktop as a "window exception"
Click to expand...
Click to collapse
this one was a good move. down-up gesture works like a charm now. (do not forget to enable gestures while except window) I am sure now, the program competed with desktop for resources to process the touchscreen control.
All other gesture movements don't work. It seems TodayAgenda still compete with FTouch

settings
what did you have for the Enable FtouchSL timeout:
how about the Gestures timeout:
i excluded the desktop. Click on Exceptions then add window title. in the window title, typed in desktop
is that right?

[APP] Simplest working workaround for Landscape TF3D

Inspired by http://forum.xda-developers.com/showthread.php?t=471295
Instruction:
Make sure that that TF3D installed and works like it should in portrait mode
Get latest MortScript from here. Tested with latest beta (preferable).
Install MortScript on your X1
Unzip attached script and put in your \Windows\StartUp (or localized name) folder on your X1
Softreset (or run script manually)
Report
The basic idea is VERY simple - just prevent screen rotation while TF3D is active and allow landscape for any other apps.
Script dynamically switches between landscape and portrait modes if keyboard is unfolded and device is switched from TF3D to “normal” app or vice versa.
If you are using standalone SPb Mobile Shell (not as a panel) this script prevent show "SPb Now screen" on wakeup if TF3D is onscreen.
Now with real prevention of landscape for TF3D.
Drawback - camera button remapped to right softkey while TF3D is on screen. Looking for solution.
Version History:
v1.0
+ Initial Version
v1.1
+ Added ability to autodisable "SPb Now on wakeup" while TF3D on screen
v1.3
+ Real prevention of landscape for TF3D. Camera button not functional while TF3D is on screen.
v1.4
+ While TF3D is on screen right softkey button works as camera button
+ If TF3D isn't on screen right softkey buttion works as right softkey (hardcoded)
Please include in report TF3D version (source) and type of TF3D use (Today/Panel).

I like simple and effective solutions, kudos

MapleDouglas said:
I like simple and effective solutions, kudos
Click to expand...
Click to collapse
OK, so test it.
And don't forget to report.

Just developed new script for people who use SPb Mobile Shell not as a panel.
I’m personally prefer use SPb Mobile Shell in that way because I like fullscreen look and feel of Mobile Shell (and Mobile Shell Panel doesn’t support Russian).
This script include functionality of TF3D landscape workaround plus prevent SPb “Now Screen” to be shown in case that TF3D active.
If you don’t have SPb Mobile Shell you can use this script as well, it will function only as TF3D landscape workaround in that case.
Installation instruction in first post.

Just tried it. It works. When the phone switch to landscape mode when you slide out the keyboard, it switches it back to portrait mode.
Although i really wished that this script stops TF3d to switch to landscape mode entirely. so we dont see that ugly ass half pixelated screen at all

rotsu said:
Just tried it. It works. When the phone switch to landscape mode when you slide out the keyboard, it switches it back to portrait mode.
Although i really wished that this script stops TF3d to switch to landscape mode entirely. so we dont see that ugly ass half pixelated screen at all
Click to expand...
Click to collapse
It's just my first mobile script.
I'll try to find out is total prevention possible becase I don't like ugly screen on nice device too.
But anyway it's better to have ugly screen for 1-2 seconds than ugly screen all the time.

Just developed new solution with real prevention of landscape for TF3D.
Drawback that camera button not works while TF3D on screen. Looking for solution.
New version in first post.

1.3 works fine, camera has no issues.
using Itje 2.2 tf3d as today plug In

1.3 works, but it disabled the camera button as stated
Using UK generic ROM, tf3d as panel. fix it fix fix fix fix!
Thanks btw!

fards said:
1.3 works fine, camera has no issues.
using Itje 2.2 tf3d as today plug In
Click to expand...
Click to collapse
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all

DoubleVision19 said:
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all
Click to expand...
Click to collapse
did you follow the instructions exactly? do you get any error messages?
i originally used the version of this with the spb fix in it (for no reason than I could) then replaced the 1.3 file. Can't see how that would make any difference.
I am using the b10 of mortscript btw, but don't think that makes any difference.
Karlson nice script, I might try some different plugins, if I can get the old BIG VGA home plugin working from the x7500 that would look great in landscape. I've never been that impressed by this action screen..
Think about it I might just try some of my old Rltoday screens.

Very nice fix
my TF3D screen doesn't rotate anymore Thank you

DoubleVision19 said:
Just wondering how you got yours to work? I have the same ROM as yours, but nothing works on my phone...won't go into portrait mode at all
Click to expand...
Click to collapse
Which version of TF3D and MortScript?

fards said:
did you follow the instructions exactly? do you get any error messages?
i originally used the version of this with the spb fix in it (for no reason than I could) then replaced the 1.3 file. Can't see how that would make any difference.
I am using the b10 of mortscript btw, but don't think that makes any difference.
Karlson nice script, I might try some different plugins, if I can get the old BIG VGA home plugin working from the x7500 that would look great in landscape. I've never been that impressed by this action screen..
Think about it I might just try some of my old Rltoday screens.
Click to expand...
Click to collapse
Share your ideas - I can make more scripts for any automation.

Just published new version.
Camera button remaped to right softkey.
If TF3D isn't active right softkey works as default (hardcoded).
Please post any suggestion especially if you need different right softkey functionality.

Karlson2k said:
Just published new version.
Camera button remaped to right softkey.
If TF3D isn't active right softkey works as default (hardcoded).
Please post any suggestion especially if you need different right softkey functionality.
Click to expand...
Click to collapse
Well, it would be nice if you could wrap a small UI around your app. Perhaps a landscape disable "toggle" and right softkey remap toggle as well? I'm going to try it again, see what it does now.

Karlson2k said:
Which version of TF3D and MortScript?
Click to expand...
Click to collapse
for TF3D, I have Version 3.0 (Build 32076) <-- This one came with itje's Touch-IT Xperience ROM v.2.2
for MortScript, I'm using the latest one from the link you provided

using V1.4 looks better
just a little problem though, when i slide out my keyboard it kick back to portrait then came back to landscape --> improvement, it stay in landscape, last try it will always kick back to portrait.
when i slide in, it close the cmEXlandscape perfectly
GREAT JOB!
THANKS!!
Cheers

Has anyone tried this with TF3D as a panel?
Also, what happens when I slide open the keyboard, does it rotate back to portrait or does it show the tabs, but as shortcuts on the screen?

Karlson2k said:
Please post any suggestion especially if you need different right softkey functionality.
Click to expand...
Click to collapse
Simply irresistible offer
I'd realy like to use my right softkey to start recording voice notes (single press to star recording, not "record while holding")

[APP][15/02/2009] iContact (supbro and truburt versions) with sensors

Recently, I've been playing around with the Diamond sensor APIs seeing how things work, and thinking of ways to apply them to apps.
As you may well know, iContact has very long lists in it, which can be a tad tedious to scroll through if you have loads of contacts, so I've added support for both the touch "wheel", and the gsensor.
This is based on iContact 0.91
To use:
You can scroll with the wheel like iPods click wheels. Clockwise goes down the list, counterclockwise goes up the list.
You can scroll with the gsensor by tapping the centre button and then tilting the device up or down to scroll up or down the list. Releasing the centre button will stop the scrolling.
Currently, landscape (probably) won't work with the gsensor.
Thanks to supbro, truburt and larna for iContact, and Scott Seligman for how to use the sensors.
Since iContact is GPL, you can grab the source code as well as a cab below!
Changes:
iContact BE now supported as well!
0.91.1 - An updated scrolling mechanism to make a steeper tilt move faster.

New version with better scrolling now available.

how i install it ?

derfler said:
how i install it ?
Click to expand...
Click to collapse
Download the 0.91.1 cab file, copy it to your device, and then run it from file explorer.

would you be willing to consider it for truburt's edition?

curious george said:
would you be willing to consider it for truburt's edition?
Click to expand...
Click to collapse
If I can get the source, it shouldn't be too hard.

Quick Q:
Can i just install the iContact.Sensors cab and keep my current iContact version but adding gsensor capability to it?
Thanks very much.

Sergio PC said:
Quick Q:
Can i just install the gsensor cab and keep my current iContact version but adding gsensor capability to it?
Thanks very much.
Click to expand...
Click to collapse
No. This uninstalls the previous one, and then installs the new one.

I will test it right now

Thank you, will test it right away!
Looks promising

I tried it, but it makes scrolling in iContacts imho very nervous. Re-installed original iContacts ....

watikjebrom said:
I tried it, but it makes scrolling in iContacts imho very nervous. Re-installed original iContacts ....
Click to expand...
Click to collapse
Is the normal scrolling (i.e. finger scrolling) affected? It shouldn't be as I haven't touched the code for that!

If I understand the first post correctly I simply have to place my thumb on the center sensor(not depress) and tilt and the scrolling should begin?
If that is correct can you expand that capability into any windows application?
Maybe incorporating something along with Gcontroller here http://forum.xda-developers.com/showthread.php?t=429569
cg

curious george said:
If I understand the first post correctly I simply have to place my thumb on the center sensor(not depress) and tilt and the scrolling should begin?
If that is correct can you expand that capability into any windows application?
Maybe incorporating something along with Gcontroller here http://forum.xda-developers.com/showthread.php?t=429569
cg
Click to expand...
Click to collapse
That is correct. I think creating a system wide service may prove more difficult, as in iContact, all it does is simulate a key down event with VK_DOWN or VK_UP. This may not be quite what's wanted depending on the application.
I've been looking at ways of expanding butler, and so far I've built in screen rotation, launching applications for every event and one or two other tricks, but system scrolling could be another one to add.

hi,
if you want scroll in iContact do this:
Create a key and value, as below
HKLM/Software/HTC/SmartTouch/iContact
(String Value) ClassName = iContact
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
easy to create, work fine for me....
V.
have fun

thankkkkkkkkkkkkkkkkkkkkkkkk

voyd said:
hi,
if you want scroll in iContact do this:
Create a key and value, as below
HKLM/Software/HTC/SmartTouch/iContact
(String Value) ClassName = iContact
(DWORD Value) Mode = 4
(DWORD Value) WheelCount = 2
easy to create, work fine for me....
V.
have fun
Click to expand...
Click to collapse
That works with the scroll wheel, but not with the gsensor. And, since I needed some of the scroll wheel things to be able to have the gsensor working well, I decided I may as well integrate both functions.

hi,
yes you're right, it work only with the wheel....
It's a ery simple solution to scroll with wheel in many soft, i use Burt icontact insted icontact 0.9 so your solution do not work for me, my solution is not perfect but for people whose just want wheel scroll it's perect and easy and it works on every soft if you have the name of the soft's CLASS.
But your solution is cool for people who use iContact 0.9.
congratulation
V.

brilliant idea, like the way you have done it.
You have managed to improve a already great program!
thanks very much

Is it possible without the touching the center?

HTC Gsen in More Apps (from TP2)

If you guys didn't see this http://www.fuzemobility.com/?p=2225 the gsensor has now been enabled in a lot of applications without the third party apps (this is HTC's gsen from the TP2 with a mod to the registry). You need to install the attached apps (which come from JMZTaylor of PPCGeeks): http://forum.ppcgeeks.com/showthread.php?t=58596
You'll get gsen love in email, contacts, IE, calendar, etc and all you do is change the registry values in HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList to add or remove apps from the gsen list.
Herg is adding a few apps to this list so this will likely be updated shortly.

bugsykoosh said:
If you guys didn't see this http://www.fuzemobility.com/?p=2225 the gsensor has now been enabled in a lot of applications without the third party apps (this is HTC's gsen from the TP2 with a mod to the registry). You need to install the attached apps (which come from JMZTaylor of PPCGeeks): http://forum.ppcgeeks.com/showthread.php?t=58596
You'll get gsen love in email, contacts, IE, calendar, etc and all you do is change the registry values in HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList to add or remove apps from the gsen list.
Herg is adding a few apps to this list so this will likely be updated shortly.
Click to expand...
Click to collapse
http://www.mediafire.com/download.php?2oczh1mdy0i
more apps added

I installed it. Work great ! Except when HTCvolume changed and multiples apps open like others (changescreen, gsen, ...)

Hi, what does it do exactly. does it scroll or just rotate the page?

Toggs said:
Hi, what does it do exactly. does it scroll or just rotate the page?
Click to expand...
Click to collapse
just causes the screen to rotate

This is cool, thanks.
BUT could you tell me what "Jmz gsensor setup.cab (4.8 KB)" does?
I installed herg62123's cab and it rotates all the simple apps I need, and leaves TF3D alone. Then I installed Jmz gsensor setup.cab and the only change was that TF3D tries to rotate, which I don't want.

seems to have a problem with the HTC Calculator ... it will rotate and go back to the TF3D screen ....

If you install Herg's app that is all you need as it incorporates the cab in the first posting with a few additional applications that herg added (so it rotates in more apps). I have it working on the calculator and it works as expected- it causes rotation. For me it does not force me back to TF3D

I find that S2P will not rotate with this installed.
Anyone has the same issue with me?

This is fantastic, thanks!
I was using Gsen but the tiny white pixel in the top middle really annoyed me. Not sure if it was intentional or not, but it was there when Gsen was active.
This also does not seem to rotate Manilla when the device is locked, as Gsen occasionally did.
Also much quicker to rotate.
I have tried Gyrator2, Gsen and this one, and this is easily the best one to use on the THD.

I can rotate almost everything with the new sdk; however i have problems with spb wallet: it rotates only if i keep it opened for half an hour in background (seems the sdk takes the whole life to recognize this module is running).
Btw:
- class for .net apps is #NETCF_AGL_BASE_
- wildcard (*) is allowed as window class name

apparently, for me, it doesn't work at all .....
i tried turning on the camera, once i turn it sideways, it will minimise the camera and go back to TF3D.... ditto for calculator, and any screen that it rotates .... it will minimise the current screen and push me back to TF3D home page ...
anybody else having this problem?

hello i need some help i install the Jmz Diamond2 G-Sensor.cab and Jmz gsensor setup.cab. nothing happen when try to sent sms it still didn't rotate actually nothing rotate. i reread the form i think im missing this part "HKCU\Software\HTC\HTCSENSOR\GSensor\WhiteList". I new at this so i don't know what it mean or how to do it. If that not the problem then anyone know why it didn't rotate after the 2 cab file i install. Thx for Help