Database Users

P4350 No Wifi (no mac)

Hello,
I have the following problem, when i try to start my wifi adapter (via conn manager) it will not start. I tap on the wifi icoo, it starts to open it, but after 5 seconds its stops and wifi is still de-acktivated.
When I look in my wifi adapter settings I also dont get a MAC adres...
I seems like it cant find my wifi hardware chip.
So i am stuck, can anybody pleas help me...
maybe with a updated "wifi driver"?????? (radiorom??)
wm5, no changes, hard resset wil not help

Dos nobody have any clue ?????

try flashing another official ROM version. Or the same ROM you're using - once more.
otherwise - take it to the service centre

Decon Frost said:
Hello,
I have the following problem, when i try to start my wifi adapter (via conn manager) it will not start. I tap on the wifi icoo, it starts to open it, but after 5 seconds its stops and wifi is still de-acktivated.
When I look in my wifi adapter settings I also dont get a MAC adres...
I seems like it cant find my wifi hardware chip.
So i am stuck, can anybody pleas help me...
maybe with a updated "wifi driver"?????? (radiorom??)
wm5, no changes, hard resset wil not help
Click to expand...
Click to collapse
I would try the latest WM6 ROM for your Herald first.

Thats the whole issue, I have a (dutch) Vodafone branded phone....... So no updating and no original ROM for me...
or dos anybody have the original dutch ROM

had a similar problem with a cooked rom in the past. the only way I could turn on wifi was to start it through the settings -connections -wireless lan. maybe it will work for you.

Today 09:47 AM
neptune had a similar problem with a cooked rom in the past. the only way I could turn on wifi was to start it through the settings -connections -wireless lan. maybe it will work for you.
Click to expand...
Click to collapse
This is indeed also a common problem. I had this once before and indeed with your workaround it will work again. But unfortunately this is not the answer for my problem. I tryed your method and it will not work.
The whole wierd thing is that I dont get a MAC adres. So the chip is probably broken. Vodafone dosnt give me support and HTC dosnt eather. So Ill have to contact a third party company to fix my phone. after its fixed i will have to send the bill to vodafone..... What a crapy service.

WIFI Problem

Hi;
i have WIFI problem for my dopod 818pro, and try to solve that problem by searching tutorial through the web site..but nothing solution found
I tried Flashing using a few Good ROMS in this forum but the result also same.....
anybody can solve this problem...?
thanks

What is the problem exactly?

the problem is cannot detect nearest WIFI terminal ....
Wifi on/off ok...
i try use my friend iPOD touch, that iPOD detect Wifi with no problem...
any setting need to configure on the dopod?

Try going nearer to the WiFi, and in start->settings->Connections (tab)->WiFi, put the 'power' up to max (there is a slider).

same problem!
take a look here.
http://forum.xda-developers.com/showthread.php?t=279727

I wonder if this is hardware rather than software. Try an official WM5 (AKU2.2) ROM from the ftp/wiki and see if you still get this problem.

i have this same problem when I install not original qtek ROM (WM6 or WM6.1).
Tray to scan your network using PeekPocket (on your PDA) and you see if problem are hardware or software. PeekPocket in wm6 & wm6.1 found my AP but default Windows Mobile not (in wireless settings). In WM5 all is tip top
Sorry form my bad english

massior said:
i have this same problem when I install not original qtek ROM (WM6 or WM6.1).
Tray to scan your network using PeekPocket (on your PDA) and you see if problem are hardware or software. PeekPocket in wm6 & wm6.1 found my AP but default Windows Mobile not (in wireless settings). In WM5 all is tip top
Sorry form my bad english
Click to expand...
Click to collapse
Thanks..i will try...
One more question, It can be fix if the problem is from hardware?
---------------------------------------
eeerrrr i can not find official WM5 (AKU2.2) ROM....can give link... thanks

My WiFi solve with this regedit
try this Registry Tweaks, solve my wifi problem
CHKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms
'HTCPreloaded status" =dword:0000001
'HTCPreloaded wifi" =dword:0000001

UnoS77 said:
try this Registry Tweaks, solve my wifi problem
CHKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms
'HTCPreloaded status" =dword:0000001
'HTCPreloaded wifi" =dword:0000001
Click to expand...
Click to collapse
Thanks....will try this...
I`m worry its hardware problem...

try this Registry Tweaks, solve my wifi problem
CHKEY_LOCAL_MACHINE\Comm\TNETWLN1\Parms
'HTCPreloaded status" =dword:0000001
'HTCPreloaded wifi" =dword:0000001
Click to expand...
Click to collapse
This is work on dopod 818 pro??

Should do as the 818p is just a branded version of the prophet..

Hi there,
I've a problem with my wifi pocket. It can detected with my wireless router and get the IP. But the problem is few minutes up and few minutes down. That's mean it's not stable. But if I'm using with my Nokia N95 it's working well. I'm using WM6.1 korand.
Can help me please?

can anybody here help me please?

hello
i have the same problem with my prophet wifi. it cannot detect any wireless network. leds working but i think cannot scan for wifi. i try all this you say here but i cannot solve my problem.
can anyone help?

Wifi Issues

Hi, I recently got my Topaz a couple of days ago, I have always had winmo devices from the start and am loving the Topaz, I instantly upgraded it to a 6.5 Rom from this site.
I am having issues with my Wifi not working properly, it connects but the internet traffic doesnt go anywhere, i have tried a tracert from the device and it doesn't get past my internet router.
Other devices on my wireless network are fine and my old winmo device worked fine.
GPRS connects fine and resolves pages and email etc.
Anyone have any ideas ? Its driving me crazy !
Thanks

Hi,
it's quite difficult to help you without knowing your ROM and radio versions,anyway I solved a similar problem by setting to "Maximum Performance" the slider in Wifi's Power Management tab. I suggest to try different radios, in my experience the latest two absolutely require this setting to work properly

Thanks man, that setting worked a treat !

alanrenouf said:
Hi, I recently got my Topaz a couple of days ago, I have always had winmo devices from the start and am loving the Topaz, I instantly upgraded it to a 6.5 Rom from this site.
I am having issues with my Wifi not working properly, it connects but the internet traffic doesnt go anywhere, i have tried a tracert from the device and it doesn't get past my internet router.
Other devices on my wireless network are fine and my old winmo device worked fine.
GPRS connects fine and resolves pages and email etc.
Anyone have any ideas ? Its driving me crazy !
Thanks
Click to expand...
Click to collapse
sualc said:
Hi,
it's quite difficult to help you without knowing your ROM and radio versions,anyway I solved a similar problem by setting to "Maximum Performance" the slider in Wifi's Power Management tab. I suggest to try different radios, in my experience the latest two absolutely require this setting to work properly
Click to expand...
Click to collapse
alanrenouf said:
Thanks man, that setting worked a treat !
Click to expand...
Click to collapse
WIFI is not working for me on a standard ROM 1.39.405.2 and I have set 'max performance'.
Frustrating...
Tony

bambony said:
WIFI is not working for me on a standard ROM 1.39.405.2 and I have set 'max performance'.
Frustrating...
Tony
Click to expand...
Click to collapse
What are your symptomes? Do you at least have a "connected" icon but cannot surf the web or upload weather forecast? Did you try other internet accesses (other modems,routers..)? I know it's ridiculous that a stock device beahves like that..maybe you should consider to try an upgraded radio.

sualc said:
What are your symptomes? Do you at least have a "connected" icon but cannot surf the web or upload weather forecast? Did you try other internet accesses (other modems,routers..)? I know it's ridiculous that a stock device beahves like that..maybe you should consider to try an upgraded radio.
Click to expand...
Click to collapse
Thanks for your reply.
The TD2 tries to connect but continually fails. I have the same settings on my MDA Touch (HTC ELF) which has flawless WIFI performance. How do I upgrade the radio (which might improve my TD2 in other good ways)? I didn't think the radio would have any influence over the 802.11 network adaptor.
Tony
Ps. After finishing typing this I checked WIFI and managed to connect for a nearly a minute...

Try to change a rom (And radiorom too). I noticed that Tom Condom's ROM have some problems with Wi-Fi (On my device), Rx on it is 54mb, Tx is laggy 1mb.
Wi-fi on Shadowline's rom works pretty good - rx and tx both are 54mb.
P.S. My radio is 3.44.25.27

Bluetooth: Not being able to pair / connect

Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance

Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....

Thanks for the quick help!
I already enabled this setting, but I still have these problems...

I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...

Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???

I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...

Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...

Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...

Have you tried reflashing with the latest update from the HTC website?

This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...

Has anyone got an idea to solve this problem...?

No intention of being a smartass though...
Have you checked the box "visible"?

magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...

Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones

WIFI ISSUE with ARTE_LOVE_WM65_23414_beta1

Hi friends,i flashed my artemis with dewatara's ARTE_LOVE_WM65_23414_beta1 rom. But there is a big bug. On comm manager the wifi switch doesn't function....and no wifi connection is possible......any suggestion?

WIFI
The Artemis does not have or support WIFI

gribo said:
Hi friends,i flashed my artemis with dewatara's ARTE_LOVE_WM65_23414_beta1 rom. But there is a big bug. On comm manager the wifi switch doesn't function....and no wifi connection is possible......any suggestion?
Click to expand...
Click to collapse
Hi, iv'e had this problem on many Roms, I found that Shady313_-_WifiInit.cab
does the job.

Dixiesmu said:
The Artemis does not have or support WIFI
Click to expand...
Click to collapse
I would like to see where you saw that
The Artemis have 802.11b/g
zakzor

Khanda said:
Hi, iv'e had this problem on many Roms, I found that Shady313_-_WifiInit.cab
does the job.
Click to expand...
Click to collapse
I've had the problem that my wifi network was visible in the network list, but the device isn't getting any further than "Connecting" and after a minute or do it'll says "Cannot connect to the network. Check your network and service provider settings an try again"
I've tried you .cab file but no luck...
Any more tips?
Btw i have a Dutch Artemis so the IS Wifi hardware (wifi antenna hardware visible)