Softbank Issues - Networking

I'm having issues with my Softbank AP settings, and was hoping that someone here could give me some info on this, being that I can't find an answer anywhere else.
I've had a Hermes for the past six months or so until I finally broke it dropping it down a stairwell at work.. I can't justify buying a new WM device right now either, I just have no real need for it (here anyway), and my Excalibur won't work here in Japan.
I was wondering if someone could help me with the Softbank AP settings for my other phone (a non-WM device), for example, the password that I can't seem to find anywhere after the April 07 changes. This was so much easier with the quick fix connection .cab for my Hermes..
Anyway, thanks in advance.

Related

just a blackberry.cab file... not a whole rom

Hi, i have been searching for a cab file to install just the blackberry connectivity... I used to have it and i am pretty sure i got it from this site.... it was a while ago.
I now have a VPA compact and i dont think it has enough space for the fully loaded custom roms (its only a 64mb baby!)
I'd really appreciate it if someone was able to point me to the right direction... i tried searching for blackberry.cab to no avail...
PS. i have read alot of discussions on here about getting it to work properly... just to let you all know, if your PIN number for your blackberry client meant for another network.... blackberry themselves will cut of the traffic to your pin number... although this may take a week or so for it to cut off. The network you are with will not know this has happened hense you will get no help from them. This is a LICENSING issue... tech support advisors will not have this within thier network's published information.
Thanks in advance for your help!
found the o2 one....
For those who read the title.... heres the o2 version link (from within the site) http://forum.xda-developers.com/viewtopic.php?p=81361
You'll find the CAB you're looking for here ...
http://forum.xda-developers.com/viewtopic.php?t=21991&start=25
thanks, but thats the T-mobile version... I think the german VPA has the bb software that generates a PIN number that will work on vodafone for over a week! i had the o2 one working for about 8 days on my qtek2020i. then it got cut off... I am hoping to get the "proper vodafone blackberry -webclient-" which i know exists as i had a customer in my store show me one up and running. (vodafone branded and all)

Everything looks like it should be right, but it isn't -GPRS

Hi all,
I've spent the last 3 weeks searching through everything so as not to waste anyones time with a simple question but to no avail.
I've been given an XDA II from a family member as they have upgraded to the Exec and I have been using it as a PDA only. Well I see that Orange have some good deals on the go and so decide to use it as a phone/Internet enabled PDA.
I've unlocked it (many times now) got 2003SE on it and have put the correct MMS and GPRS settings in (The ones from Shadamehr). I've checked with Orange and GPRS is enabled on my account with them (PAYG at the mo) but for some reason the same thing that was happening when I first got it pops up
"Cannot connect
There is no modem at the above number..."
So best my small mind can figure is that somehow the 'phone part' of the PDA isn't working. I've tried other sims in it and they don't work either (o2 and Three - but I think Three is funny anyways). Is there something wrong with the actual phone bit?
It's a legit XDA with the M1000 ROM upgrade from the orange site which has made it 2003SE
Does anyone have any knowledge about how I can get my PDA to be a phone? It was once before (but with O2)
Thanks in advance for any and all help.
-o0zy
http://www.taniwha.org.uk/gprs.html
No modem at above number
Thanks for the link, but believe me I've tried this. I retried it to be sure just now.
"No modem at above number" is what I get after the XDA II tries to connect.
I have no phone reception whatsoever, no internet and no SMS.
My XDA II just works as a PDA with no communication possiblities apart from USB cradle.
Again, thanks in advance for any and all help with this.
-o0zy
If there's no phone reception, and no GPRS, how do you expect to connect to one?
Not to be mean or anything, but aren't your hopes of connecting a little farfetched if all the systems you're trying to use are down?
Not to be mean or anything, but aren't your hopes of connecting a little farfetched if all the systems you're trying to use are down?
Click to expand...
Click to collapse
Your not being mean, believe me after a month of searching through here and SPV developers anything that wuld resolve this issue would be appreciated.
Why would the phone element of my XDA just stop working? I can only imagine some sort of Hardware fault but I'm a thorough bunny and would like to make sure of this. A diagnostic app or some way of reading the phone element like a device driver would be handy.
So in brief, why has my phone part of my XDA II stopped working and how do I switch it back on again (if this is at all possible)?
Thank you for your replies thusfar Cynagen, I shall start to ask these questions in the Himalaya forum also now since it seems model specific and not network related.
Any and all further assistance is much appreciated.
o00zy

MMS config on three networks (Hutchinson Aus)?

Hi Folks,
Just upgraded from an O2 XdA IIs to an iMate JasJar.. Niiiice piece of kit I did the upgrade so I could connect to 3, as they were the only provider that I could find that would let me do a data bundle on my mobile plan (I'm out of the office a lot of the time, so like to get my email via gprs). Anyhoo, everything's working great, except I can't seem to get the right settings for MMS.
So I'm hoping someone here has a universal on 3 here in .au and has MMS working, and can tell me what config they're using..
Thanks,
Damien
G'day Rendrag,
I have seen alot of people having problems with getting 3 MMS to work on their non sold 3 phones, have you checked out the settings here that some people have posted? http://www.aussie3g.com/modules.php?name=Forums&file=viewtopic&t=14311&highlight=3services
I will soon to be investigating this once my m5000 arrives. Apparently everything else works fine on the 3 network.
Cheers
G'day Rendrag,
I have seen alot of people having problems with getting 3 MMS to work on their non sold 3 phones, have you checked out the settings here that some people have posted? http://www.aussie3g.com/modules.php?name=Forums&file=viewtopic&t=14311&highlight=3services
I will soon to be investigating this once my m5000 arrives. Apparently everything else works fine on the 3 network.
Cheers
Hi Ahrjay,
Those are the settings I'm using, but sending MMS's just doesn't work.. I've seen plenty of people on aussie3g.com saying they can't get MMS working but there's been no posts about it since february, so I thought I'd post over here incase someone knew
Regards,
Damien
I thought i made a post in here last nite about my problems too, but i dunno what happened, sufficed to say, i like to consider that i have fairly good know how, when it comes to this sort of stuff, and i can't work out, how to send an mms for the life of me...
and i've tried, everything i can think of... i just can get it to work, i hope someone out there can help us out..
FWIW I have been trying for months as well.
I even tried ringing the help number, but the're useless. They ask what phone you have and when its not one of the "three" phones they have no idea what to do.
Perhaps bumping this up to the front page might help.
Jon
Anyone have any success yet????
Not me.. I even went to the trouble of making a bit of a scene at the hutchinson stand at CeBIT the other month over their MMS not working and them not giving a stuff, but the tech guys all ran for cover, and left the sales guys going 'ummm'.
Rendrag said:
Not me.. I even went to the trouble of making a bit of a scene at the hutchinson stand at CeBIT the other month over their MMS not working and them not giving a stuff, but the tech guys all ran for cover, and left the sales guys going 'ummm'.
Click to expand...
Click to collapse
Grr... what the hell is going on?
Surely the phone, is capable of doing it all and then some...
So I have to ask, where is the problem lying? Is it in some sort of I.D. being rejected? Connection settings? Or some sort of software malfunction?
To my understanding, Vodaphone have recently started selling these phones, so i would guess, that they're service is compatiable in every way with the jasjar????
gunigugu said:
So I have to ask, where is the problem lying? Is it in some sort of I.D. being rejected? Connection settings? Or some sort of software malfunction?
To my understanding, Vodaphone have recently started selling these phones, so i would guess, that they're service is compatiable in every way with the jasjar????
Click to expand...
Click to collapse
Hmm, might be worth a trip down to the local vodaphone store and have a look at what settings they use, and see if they're anything like what we're trying to use on three?
Rendrag said:
gunigugu said:
So I have to ask, where is the problem lying? Is it in some sort of I.D. being rejected? Connection settings? Or some sort of software malfunction?
To my understanding, Vodaphone have recently started selling these phones, so i would guess, that they're service is compatiable in every way with the jasjar????
Click to expand...
Click to collapse
Hmm, might be worth a trip down to the local vodaphone store and have a look at what settings they use, and see if they're anything like what we're trying to use on three?
Click to expand...
Click to collapse
Hmm... well the settings would be different, as they will all be different server...
I think, it's an I.D. thing personally. I think the JasJar is sending some infomation and 3 is just rejecting the whole mms. But i could be way off, i don't know.
What i'm really curious about, is how vodaphone would support their content service, as i can't think of any way to play RTSP streams on a WM5 device. Which is pretty much how all the content on 3 is streamed, making it in-accessible for all of us with Universal's, and all future WM5 devices....
I think this is a universal 3 network issue for the Universal :shock:
I think it would be good if we discuss this all in one universal "3" thread .....I think this thread is a good one to discuss it in because there are people from other countries on the 3 network also trying to sort out similar issues and there know how is also very helpful.
http://forum.xda-developers.com/viewtopic.php?t=51646
I've been trying since MAR and no avail. I can "send" MMS to myself and it'll come (so I get the subject header) but when I try to download the actual content it gives some stupid error (the same happens when ppl MMS me - get the header but no content)
Three network
Hi all,
Everyone around the world seem to be having the same issues with the Three network.
I think it might be a good idea if with consolidate all the Three network discussion to one thread. Then maybe if we combine efforts we will find the solutions.
This is the thread I think would be good to move all the discussion to as it already has some good stuff in there
http://forum.xda-developers.com/viewtopic.php?t=51646
I hope you think its a good idea too....and we see you in there.

Using 9100 Abroad

Hi,
Not been on the forums for a while so here goes - seems like this question should already have been asked but I couldn't find anything so apologies if it has and I missed it.
I use my WIzard in the UK but I'm going to the USA later this month. Do I have to manually switch the band on the wizard? I'm pretty sure i don't (and cannot find any option to do so in the settings) but I just wanted to make sure.
thanks for any help
Lewis
no, you don't do anything. you just put the manual network search, it's better this way, while you are in roaming

Blackberry Connect

Hello,
First, let me apologise if this has been asked and answered but I went through loads of pages without the answer so I thought I'd ask.
Right, I did have a TYTN II with bbconnect working and full usage of the BB service. Since going to the X1, I can't seem to make it work no mater what I do, including the registry hack I used on the TYTNII.
I get 'Network available' > 'data tunnel enabled' > disconnect and PIN always stays at 'Pending'.
Has anyone figured out how to make this work yet? If not, I think I'll have to sell the X1 and go back to my tyttnii.
thanks in advance!
/frustrated\
Yes, I have been waiting for the BBConnect for my X1 also but it is not available yet at this moment.
I will wait for the BBConnect to be available instead of selling the phone because of this software.
Hi all - 1st time here and posting.
Anyone know if there has been any success on this front?
Looking at getting an X1, but it would be a waste if I couldn't make use of BB Connect.
Anyway, will be watching with keen interest.
Cheers

Categories

Resources