Hey guys, i have been reading alot on the forum here and elsewhere. I am running NexVision's Hybrid for Verizon. My GPS worked fine in google maps for a few days.
Then i started to set up TomTom 6, i got the maps and everything, went thought the set up, i download a GPS viewer program to Prime the GPS for tomtom.
My problem is now, my GPS won't lock on. it wont' show anything in tom tom, says no vaild GPS signal, but it shows sats being looked at but in grey. In google maps it will say GPS active, then searching, and will show the flashing blue/white dot. But the dot will find me, not pinpoint, but about a mile away from where i am...
Did i mess something up? Was thinking of dumping the rom and going with nochems
Related
Has anyone got the Orange M700 to work with the GPS function on Google Maps? Or does the HTC rom have to be installed??
not sure I get what you mean.... do you mean run google maps on the M700 OR use the M700 as a GPS mouse and feed the signal to a lappy and run Google Maps on the lappy?
I have done the second way, BUT you need to upgrade your google maps for $20/year (iirc) which alows you to use the GPS functions.
Not sure about google maps on the M700 as it's a huge piece of software.
Otherwise TomTom 6 has Sat images built in for overlay onto the maps when route plotting.
I'm using Google maps for pocket PC on the M700. Everything is OK.
Sorry for not being very clear....
Google maps works fine as I am messing around with it just now, but i dont get a gps location when "track location (gps)" is selected, my M700 tries to locate satellites, but then fails. I was just wondering if this function worked
Super sheep, does the "track location (gps)" function work when you select it?
On the help pages there is no mention of having to pay a subscription to the gps service to enable it.
Deech, How do you access the sat maps on tomtom??
Thanks
They are built into tom tom 6 and some where in the set-up you can select the Sat overlays, not used it my self but they are there ;-)
/me is now looking google maps mobile ;-)
also El Reg has a report here about it
http://www.theregister.co.uk/2007/05/10/google_maps_uk/
edit....
Just fired up the wi-fi (keep down data costs) and grabbed google maps, activated the gps in "menu" 30 secs later my location shwn and everything
Just a thought how many other apps are running, first time I ran it it ran out of memory, however it looked like EVERYTHING was running ;-?
AND..... Googlemaps also has to be pointed to the Com9 port
It does?
Never touched it on my M700........... but hey ho ;-)
hey, just got it to work!!
Didnt have to point to com9.
I think the problem was that it normally takes quite a while to acquire the satellites when using tomtom. I dont think that google maps is patient enough before moaning that gps isnt present.
Quite cool, but will cost a fortune in GPRS/3G charges
I just upgraded to the 3.35.651.2 firmware, and while my Internet speeds have increased, I seem to have lost GPS capabilities.
I used to be able to get a lock immediately in Google Maps. Since the upgrade, when I enable the GPS in G. Maps, it reads "Initializing GPS" and then "Seeking GPS Satellites (0)" but it never gets a lock.I've tried it outdoors in many locations that i've used it in before.
With the 3.16.651 rom it would lock on almost immediately.
Any recommendations/ideas?
I resolved the issue. Must have been something happening with Google Maps. I went to Menu | Options | Reset Google Maps and when it restarted, it zoomed in on my location right away.
GPS
I am using New updated HTC rom and Satellite wont lock while moving it will lock when you stop. using iGuidance v4.0 and Google maps. (my software works fine with external Holux Gps). any one having same problem or may be my GPS chip has a problem ? (tired hard reset, change locations)
I found this on the http://www.sprintusers.com/forum/showthread.php?t=153883&page=19 website
HKLM/Software/HTC/SUPLAGPS/GPSMode
Change to 4 (orginal value 2)
seems to have worked for me.
with internet I am now getting satellites indoor!
Thanks to Lecithin who posted it.
i just updated this. still waiting to find some results. keeping my fingers crossed.
btw im using the alltel rom so we will see if there is a diff
I was having the same issue. Installed quickGPS and it worked.
My Tomtom gps is not working it says waiting for a valid gps signal and wont connect. When i go to the gps status in Tomtom it shows the bars but they are grey and dont move it just freezes can anyone help me on this?
jbatu said:
My Tomtom gps is not working it says waiting for a valid gps signal and wont connect. When i go to the gps status in Tomtom it shows the bars but they are grey and dont move it just freezes can anyone help me on this?
Click to expand...
Click to collapse
You made sure all the configurations are correct?
If so you might need to await a couple of minutes while you move around or are open to a clear sky to receive a signal. To help improve the satellite lock time try searching for a GPS launcher. There are some specific for Tom Tom.
These launchers not only initiate the GPS but once it is warmed up it will run Tom Tom after. It doesn't really help 100% but it does help speed up the lock time abit.
tnx> i got it working but its not very accurate on the position. sometimes its really off
I had the exact same issue. My external gps antenna came one day later than the phone did. I plugged the antenna in, and then it found two satelites indoors. Unplugged it, and it stayed working. I walked down the street it sorta tracked my position. Hope this helps anyone else having this issue..
Edit: I found this thread via a google search and didn't realize I was in a Titan thread. My phone is the Polaris/Touch Cruise. Sorry...
I recently upgraded my Google Mpas (I was prompted inside Google Maps) and now it doesn't seem to work as well as it used to.
I am using the DCD 2.2.0 ROM for my Titan.
What happens is now it will say "seeking satellites (0)" and "GPS Active (0)" and not find any satellites. Usually it shows me as in the middle of the ocean some where. Sometimes it will flash between "GPS Active (5)" and "GPS Active (0)", but still won't work. Like I said, it was fine before I upgraded Google Maps (about 2 weeks ago). Anyone have any ideas what's causing this?
Just did the google map update today and seems to work fine.. Took a long time to get a lock but once it did it was right on.
I am using verizon and DCD 3.04...
I just upgraded to that Rom my self on my Telus P4000 , did you remember to put the GPS Hardware on Com5? cus i know mine turned itself off once i just set it back to Com5 and it worked perfectly again, and that problem never happen again...
Hopfuly this helps, if not, im sorry, i tried lol ^_~.V cheers
wildcard said:
I recently upgraded my Google Mpas (I was prompted inside Google Maps) and now it doesn't seem to work as well as it used to.
I am using the DCD 2.2.0 ROM for my Titan.
What happens is now it will say "seeking satellites (0)" and "GPS Active (0)" and not find any satellites. Usually it shows me as in the middle of the ocean some where. Sometimes it will flash between "GPS Active (5)" and "GPS Active (0)", but still won't work. Like I said, it was fine before I upgraded Google Maps (about 2 weeks ago). Anyone have any ideas what's causing this?[/QUOI
Click to expand...
Click to collapse
mine did same thing - a soft-reset fixed all the issues, google now works great
I had issues with this as well. I went and set the location setting to off (911 only) then clicked ok. And then I went back in and turned location settings back on and it started working again.
make sure location settings are ON. also, try a few COM ports, 4 and 5 work for me, but 3 is by far the best port on my phone.
From what is posted on this site...Gps is supposed to be set at com 4 at 4800....Gps works will alot better if "primed" with other software before starting map applications...such software is gpsviewer , wififofum , visualgpsce (my recommedation)
wildcard said:
I recently upgraded my Google Mpas (I was prompted inside Google Maps) and now it doesn't seem to work as well as it used to.
I am using the DCD 2.2.0 ROM for my Titan.
What happens is now it will say "seeking satellites (0)" and "GPS Active (0)" and not find any satellites. Usually it shows me as in the middle of the ocean some where. Sometimes it will flash between "GPS Active (5)" and "GPS Active (0)", but still won't work. Like I said, it was fine before I upgraded Google Maps (about 2 weeks ago). Anyone have any ideas what's causing this?
Click to expand...
Click to collapse
im on the newest DCD rom 3.2.xx on the Telus HTC P4000 , i upgraded to the new google maps 2.1.xx and works just fine for me , your DCD rom is pritty dated now, might wana look in to upgrading it ^_^ hope i helps a bit
Agreed, check location setting
Start->Settings->Phone->Services Tab->Location Settings. Turn to "on" That's what happened on my titan when I upgraded. Took me 2 hours to figure it out.
I just received my Xperia X1, its an amazing device.
The interface is very smooth.
But I cant get the GPS working. I tried already a few thing.
1)In google maps setting the GPS configuration at COM4 (all speeds tried)
It keeps saying "There is no GPS receiver found" (translated from dutch)
2)Using the Quick fix program and than retried google maps
3)Configurating the external GPS function but when I pres ok, I have the idea that the configuration isn't saved. When I restart the app It shows up like before.
4)Running GPS test: It just keeps scanning
The device is SIM-lock free with a standard duth ROM.
I hope sombody kan help me because I wont like to send it back to the shop.
Sorry for my bad english.
I don't know what exactly you are setting up there but you don't need a COM-Port for the built in GPS. Just let Windows handle the settings (Point one to choose in the GPS-Setup in Google Maps).
But you have to activate the GPS in Google Maps with "Menu --> use GPS".
Then you need to go outside to let the satellites get a view (after a minute Google Maps should have found you.)
And "Use GPS" is NEVER saved. You always have to select it every single time you load Google Maps.
Pretty annoying really but I do not think there is anything you can do about it.
Alex Atkin UK said:
And "Use GPS" is NEVER saved. You always have to select it every single time you load Google Maps.
Pretty annoying really but I do not think there is anything you can do about it.
Click to expand...
Click to collapse
I can't say I do not like this...I use google maps just to look around the area or to search a nice spot for the next vacation or simply to play around. The battery would drain very fast if GPS was enabled all the time. Of course, if you use google maps to navigate this can be quite annoying. But for me, I use TomTom to navigate and don't need GPS in google maps. (Okay, the one time I was standing somewhere on a mountain and wanted to get a overview of the landscape from above -therefore the GPS was useful )
But referring to the question:
Do your GPS now work?
I am also having problems trying to get GPS signal using Google map. Then, i was told by SE support that it will require a data connection (WIFI or GPRS) for it to work. Is this correct?
You will need a data connection to receive the maps. You shouldn't need it for the GPS to work, however you will appear in the middle of nowhere as there are no graphics of the area you are in.
I got it working, I tried it again today.
I did just the same as yesterday and now it works.
What do I love self healing devices
Have absolutely no idea what is different??
I only installed the TF3D cab but that cant make a diference.
Well it could just be the weather. Understandably it takes a lot longer to get a lock in poor weather conditions. You did not mention how long you gave it to start working when you tried before.
Google Maps often seems to take a lot longer than Tom Tom to get a lock. Also, QuickGPS does make a HUGE difference so I would recommend keeping that up to date when it asks you (every week, or at least right before you intend to use GPS).