Hello,
I know this topic resurfaces every now and then, but I can't seem to find the answer to my question in the numerous threads on the topic.
Is it possible to use microSDHC cards in the HTC TyTN (with the official WM6 rom)?
What are the size limitations (e.g. can one use an 8 GB card)?
Thanks!
Jörg
I don't think there is one "Official" Wm6 Rom - different phone companies offer different ROMs.
But with the right drivers built into that WM6 ROM, it will support SDHC cards.
Keep searching, I'm sure you'll find the right thread, I know I've read about details of the specific driver on here.
From memory, WM6.1 roms should all support SDHC, but not all WM6.0 ROMS will, only those with the right driver.
Cheers, Oggy.
Ogier said:
I don't think there is one "Official" Wm6 Rom - different phone companies offer different ROMs.
Click to expand...
Click to collapse
I meant the rom that HTC offers on their European site (for htc-branded phones)... I should indeed have clarified that...
But with the right drivers built into that WM6 ROM, it will support SDHC cards.
Click to expand...
Click to collapse
Yes, but I don't know which driver is in that rom, nor whether it is one that supports it.
Jörg
I use the official AT&T WM6 ROM, and it supports SDHC just fine. I thought that most if not all WM6 ROMs supported SDHC...
What I would do is use whichever WM ROM you want and if it doesn't support SDHC then just patch it so it will support SDHC.
Check out this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Dalork said:
What I would do is use whichever WM ROM you want and if it doesn't support SDHC then just patch it so it will support SDHC.
Check out this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Click to expand...
Click to collapse
I didn't know there was a patch. But reading that thread, there appear to be different devices where the patch seems to break the wifi. Wifi is important to me (one of the reasons I bought this device).
So, this raises a second question: if it doesn't work out of the box with the rom, does it work with the patch without breaking the wifi?
Jörg
I went ahead and bought an 8 GB Sandisk SDHC card.
And it works!!! No need to install the patch.
(official htc wm6 rom)
Jörg
dzelaya18 said:
I use the official AT&T WM6 ROM, and it supports SDHC just fine. I thought that most if not all WM6 ROMs supported SDHC...
Click to expand...
Click to collapse
Well, I don't know if you can help me out with this... I have an AT&T 8525 with the Official WM6 ROM from HTC (3.62.502.3, Radio: 1.54.07.00) and I bought a SanDisk 8GB SDHC Card and it won't read it. I have already formatted it just in case but nothing. what do you think is going on? Thanks.
I too have an 8525 that is running the official AT&T WM6 with a 4GB SDHC card.
1. Have you reformatted the memory card in FAT32?
2. This happens with my mem card, where when you insert it into the slot, do so slowly until you hear/feel the card barely click into place. The 8525 should be able to read it after that...otherwise it be a soft reboot. Weird I know, but I read someone posting it here somewhere.
Good luck
V J said:
Hello,
I know this topic resurfaces every now and then, but I can't seem to find the answer to my question in the numerous threads on the topic.
Is it possible to use microSDHC cards in the HTC TyTN (with the official WM6 rom)?
What are the size limitations (e.g. can one use an 8 GB card)?
Thanks!
Jörg
Click to expand...
Click to collapse
I have the original WM 6.0 ROM from HTC (European site, German version) on my TyTN and I'm running an 8 GByte microSDHC from SanDisk without any problems.
There is no patch or other actions necessary. It works out of the box.
err i downloaded the patch and i followed all the instructions, replaced both .dll files and installed all the cab files, but it still saying that the capacity on my card is 1948 MB and i have 4GB SDHC. please advise
Please can someone enlighten me on this one? is there any way i can put a driver on my xda trion so that it can read 4GB sdhc? please? i tried the ones instructed in this thread but for some reason it does not work and my hermes still only reads 2GB, i have sandisk 4GB sdhc, WM6. please someone advise.
Hi all
I am so happy I have found you ! I have had the MDA PRO for 3-4 years now and I just realized (reading this forum) that I can do a lot more with my PDA and I am a lot behind with the software and drivers !
Here is what I am running now:
PDA: T-Mobile MDA Pro
ROM version: 1.30.77 WWE
Rom date: 02/20/06
Radio Version: 1.09.00
Protocol Version: 42.42.P8
Ext Rom: ...blank !!! (nothing there)
I am running Vista 64 and my computers can not see the PDA any more (this is why I started searching and I finally found you).
Could you please help me with the following:
1 How do I solve the Vista64 to PDA connectivity ? The computer can't find the driver.
2. How do I upgrade the drivers to see a 16GB SD card (Kingston)
3. How do I upgrade the wireless drivers to see the 802.11g networks ?
4. What can I do to see DivX movies on my PDA ? Do I need to upate my VGA drivers to see 640x480 ?
5. What version of WM shoul I try to upgrade to ? Could you please tell me if I shoud try this on Vista64 or XP32 ? Are there any problems with this ?
Please send me the links to articles on this forum or somewhere else, no need to explain everything again here.
I would prefer to solve 1-4 without upgrading my ROM software, 5 is not a major concern for me.
Thank you
1000QA
Go to first new post ROMs for HTC Universal, by Cotulla is the greatest rom there is allowing you double the space on your universal which really gives you loads of potential, all that you need is either in universal mobile 6 as some of the programs registry tweaks and some programs such as advanced config, ill round up what i can later tonight to help more in depth
1000QA said:
Hi all
I am so happy I have found you ! I have had the MDA PRO for 3-4 years now and I just realized (reading this forum) that I can do a lot more with my PDA and I am a lot behind with the software and drivers !
Here is what I am running now:
PDA: T-Mobile MDA Pro
ROM version: 1.30.77 WWE
Rom date: 02/20/06
Radio Version: 1.09.00
Protocol Version: 42.42.P8
Ext Rom: ...blank !!! (nothing there)
I am running Vista 64 and my computers can not see the PDA any more (this is why I started searching and I finally found you).
Could you please help me with the following:
1 How do I solve the Vista64 to PDA connectivity ? The computer can't find the driver.
2. How do I upgrade the drivers to see a 16GB SD card (Kingston)
3. How do I upgrade the wireless drivers to see the 802.11g networks ?
4. What can I do to see DivX movies on my PDA ? Do I need to upate my VGA drivers to see 640x480 ?
5. What version of WM shoul I try to upgrade to ? Could you please tell me if I shoud try this on Vista64 or XP32 ? Are there any problems with this ?
Please send me the links to articles on this forum or somewhere else, no need to explain everything again here.
I would prefer to solve 1-4 without upgrading my ROM software, 5 is not a major concern for me.
Thank you
1000QA
Click to expand...
Click to collapse
Welcome to the forum
If you want to solve number 2 & 3 you have to reflash your ROM, (At least I don´t know another way to do this without reflashing)
If you decide to do that please READ the Wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
orb3000 said:
Welcome to the forum
If you want to solve number 2 & 3 you have to reflash your ROM, (At least I don´t know another way to do this without reflashing)
If you decide to do that please READ the Wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Click to expand...
Click to collapse
Thanks a lot
What are the chances to brick the phone with this ?
I am running vista 64 and ...as stated above I have problems. I still have the old WinXP 32 laptop that I can use for this but if there is a Vista 64 solution I would go with that if it is safe.
mr4r4n said:
Go to first new post ROMs for HTC Universal, by Cotulla is the greatest rom there is allowing you double the space on your universal which really gives you loads of potential, all that you need is either in universal mobile 6 as some of the programs registry tweaks and some programs such as advanced config, ill round up what i can later tonight to help more in depth
Click to expand...
Click to collapse
Thank you very much orb3K !
I am waiting your post, when you say double space does this mean that it will unlock internal space in ROM ?
1000QA said:
Thanks a lot
What are the chances to brick the phone with this ?
I am running vista 64 and ...as stated above I have problems. I still have the old WinXP 32 laptop that I can use for this but if there is a Vista 64 solution I would go with that if it is safe.
Click to expand...
Click to collapse
You´ll be fine as long as you follow the instructions
I have reflashed since I have my Universal (2005) like 50 times and all is ok!
Good luck,
Vista conectivity solved
So far by reading the docs I managed to make my PDA visible in Windows x64 wich is excellent
You are great guys !
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
for desktop PCs ! if you have by example W7 in French and want to put it in English - I mean to get English package by update- this will not work if you have an OEM license -this is not allowed!
so is that with OEMs if you want to keep license !
for your PDA you must find an unofficial English ROM only! also a way to write it to the phone BUT for this to work DO NOT use Active Sync!
I can't give you more details because don't have a PDA like yours but this problem is interesting
also subscribed to this topic
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
try a way to write firmware without Active Sync read this post to see you need some way like that
http://forum.xda-developers.com/archive/index.php/t-378907.html
ftp.asus.com/pub/ASUS/IA/P735 doesn't works more you have to find somewere a firmware in English as I see no longer Asus support they say this is deprecated sorry to hear that
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
..i wonder what would ASUS.UnlockLangID.exe do with your problem..
what's this all about:
p525 had similar problem, that could result in NOT real bricking of device after flash(wrong languague version after reset - device seem to be locked on bootloader then). when tool is used before flash, custom lang roms are working properly(interesting then, what this tool does, btw, as it is launched from WM - so, it may be microflasher, or sth like that).
now...i have strong feeling, that warnings you read about flashing different lang rom, may be related to this ridiculous, small, problem.
issue is, that i do not know, if ASUS.UnlockLangID.exe may help with p735, OR if there's version made for p735.
update: i read this again, slowly:
"Cross-language upgrade is not allowed. Please ensure the upgrade tool language is same as the default language of your device."
...they tell you about upgrade TOOL, not rom.
hmmm, so.. what, if you use tool in languague of...ROM?
maybe unlocklangid code is inside flasher, so using proper updater with proper rom is simple solution?
on the other hand - i am making roms for asuses for years, and i never used default flash method - vide usbloader method(and force mode from BL).
i am not going to encourage you to go this way of thinking, but...
AsusP said:
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
Click to expand...
Click to collapse
sorry this is just to test my signature will be back but I do not think Android is an option for your phone it is all about technical specs to port Android on that phone and only Asus will have that
by example I know about a project named Andromnia this is how to use Android on Omnia-WM phone
nice try!! but believe me this is about reverse engineering and does not works for now- no gps/gprs/wifi signal and Android crashes
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used,
EOT/
---
btw, is author of topic here?
pupakota said:
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used, so i found ridiculous whining of ..omnia user here. where were users of omnia, when andoid on that device WAS real?
Now, go and focking buy android bs, you ignored andromnia maker for months, do not whine now.
well, HTC killed everything.
btw, is author of topic here?
Click to expand...
Click to collapse
better focus on topic
To be deleted
tell me, what exactly are you trying to use to flash, abi file, exe file, what is it?
cit:
You can extract ABI file and flash you device through SD card
Click to expand...
Click to collapse
sooo..it seems, that updater BUG is reason, not roms itself here.
funny is, that rom cooking for this machine is quite real, if tools i can see are working.
--------------
upd: ok, so, if i see it right, all you need is to:
fully charge battery,
extact exe, get abi,
copy abi to empty sd card(NOT SHDC!),
go to bootloader(hard to say how - try dpad right + soft reset) and
wait.
when update's done, do hard reset.
--------------
of course, i cannot say at this moment, if whole process is safe, it works fine with zinc device(that seem to have identical flash procedures and SAME cross-lang error when manufacturer way of flashing is used(exe)).
i will try to get more info from my mate asap. cross your fingers, and wait a bit.
here's tool you may try to get abi file from original asus updater EXE file:
http://forum.xda-developers.com/showthread.php?t=368401
if it's not working, there's another one, maybe more universal,
http://forum.xda-developers.com/showthread.php?t=511158
btw, are you from Pakistan?
Thanks all of you for your input.
1 - There is NO AsusUnlockLangID.exe for Asus P735 - do not know why.
The one from P535 or P525 is useless on this phone.
2 - Great point about "same-upgrade-tool-language-possibility" yet the official ROM comes in an .exe file that i do not know how to unpack/hack in order to insert the correct ROM or vice-versa.
Could you provide me with some insight for that?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
4 - I am open to any way of flashing, given it provides the right result so all your advices are welcome.
Yes, the author is very present
@Pupakota
Ok, thank you, i've just read your last answer. I'm gonna try the tool you're talking about and inform you of the result.
PS: No, i'm not from Pakistan though i love the country, are you from there?
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
Click to expand...
Click to collapse
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
Click to expand...
Click to collapse
p750 is different pair of shoes, nothing would be useful in this case. do not try any roms made for different devices(trivia, i know).
-----
i dare to say, that any rom is possible for 735... while searching info, people made every possible build, including 6.5's...ALL chinese :E
rom from exe is exctractable, then fully dumpable, packages are clean and good...
btw, that ABI file is just a renamed rom.bin...
while Activesync method of EXE flashing is wrong, only way of avoiding problem is using SD card flash method then by using that pseudo "abi" file.
dpad to right + softreset should start flash procedure. if not, it may be some key on the right side of the device + soft reset(hard to understand translated chinese...).
but before you decide to try...
could you, AsusP, make photo of bootloader mode?
and please, post link of exe file you were trying to flash, i need it(i mean this english one). for some reason dumped rom from "WWE" version seem to be...hebrew... i really would extract real english rom.
now, only problem is, that besides of one case i did not see any clear information, if sd flash with languague change is safe.
one person wrote it is.
Hi, i'll get back to you ASAP regarding other questions, in the meanwhile here is the link of the firmware in question (that i'm trying to use) :
http://support.asus.com/Download.as...e=P735_FUU_Malaysia.zip#P735_FUU_Malaysia.zip
yup, this one seems to be exactly like one i tried to extract, indeed, it's wwe.
damn, it's OLD
it seems, that cooking custom roms is possible for this device without special problems. new 6.1 or 6.5 should work MUCH faster, than your actual one, or that wwe from asus...
try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?
ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments.
"try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?"
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Sorry, but how do you make photos of the bootloader? Do you mean the update tool?
"ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments."
I have it in the device yes but i don't have the program/CD if that's what you mean. It could be downloaded though from Asus i think...
PS: WWE stands for...?
Sorry, but how do you make photos of the bootloader?
Click to expand...
Click to collapse
Bootloader mode flash(with unpacked from exe rom image on sd card) seem to be Only way to update your device.
I am trying to determine risk linked to this method, so i need photo of LOOK of bootloader mode.
You may enter BL mode by pressing dpad RIGHT and making soft reset, if i am right.
then something should appear, and this is what i want you to photograph it for me(with..camera).
of COURSE, do not put abi image on sd card YET, otherwise you start to update, and we do NOT know yet, if you brick your machine or not.
so, at this moment i just ant to see hot it look like, without flashing, if its typical 525/750 bootloader, not some weird thing, i'd assume, that abi file flashing should not brick machine.
sorry or enigmatic words, cannot explain this easier way.
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Click to expand...
Click to collapse
..so not all 735's have 64 mb ram, i'd say, ok?
look, i do not know nothing about your knowledge level, many users of 750's with 128 mb ram are using 64 mb version of roms(typical noob would have no idea to try any different), this is why i mentioned it...
btw, besides using GanFan-ZincROMXtractor's easier way of obtaining rom file from exe is just using restorator, reshack, or similar tool to extract rom at res 152.
result is identical as using zincromextractor, though name of file must be set manually - it is Mars_G4.abi (though, it is not..real abi file, but it doesn't matter).
WWE stands for...?
Click to expand...
Click to collapse
english rom...
what exactly are you trying to use to flash, abi file, exe file, what is it?
xuanmei said:
what exactly are you trying to use to flash, abi file, exe file, what is it?
Click to expand...
Click to collapse
hey, do you have account on one of chinese pda sites?
could you download and post here any 735 kitchen for me, sir?
i'd like to have a look onto it, but for some reason i am not able to register.
WWE World Wide English - got it.
Pupakota thanks a lot for your efforts, i've had a busy schedule these days, i'll paste you all the info soon.
My knowledge level is basic yet i have some experience of programing from before and i'm very keen to learn about this, more than just using the system.